summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2007-08-14Move dwWriteReg to xgi_cmdlist.c, the only file where it is used.Ian Romanick
2007-08-14Remove unused interrupt related functions.Ian Romanick
2007-08-14Clean up xgi_(en|dis)able_(mmio|ge) and move to xgi_misc.c.Ian Romanick
2007-08-15nouveau: Catch all NV4x chips instead of just NV_40.Ben Skeggs
2007-08-15nouveau/nv40: Fix channel scheduling.Ben Skeggs
Ensure NV_PFIFO_DMA_TIMESLICE_TIMEOUT_ENABLE gets set, otherwise channels will appear to "freeze" in some circumstances.
2007-08-13Bug #11895: Only add the AGP base to map offset if the caller didn't.Eric Anholt
The i830 and newer intel 2D code adds the AGP base to map offsets already, because it wasn't doing the AGP enable which used to set dev->agp->base. Credit goes to Zhenyu for finding the issue.
2007-08-13Strobe magic 0xB03F register to flush PCI-e GART table.Ian Romanick
The original XGI kernel driver strobed 0xB03F each time a page was allocated to back a GART page. When the driver was converted to use the DRM SG interface, this code was lost. Returning it fixes a long standing issue where the X-server would work fine the first time, but acceleration commands would be ignored on the second X-server invocation.
2007-08-13Bug #11951: Fix an errno sign inversion on pre-FreeBSD 5.vehemens
Also, annotate where signs change, to hopefully remind the reader of these issues in the future.
2007-08-13Add a regression test for authentication.Eric Anholt
2007-08-13Add doxygen and fix whitespace for drm_auth.cEric Anholt
2007-08-13Fix drm_auth.c locking to not recurse on dev_lock.vehemens
2007-08-11i915: i965 non-secure batchbuffer bit has moved.Dave Airlie
2007-08-10nouveau/nv50: demagic instmem setup.Ben Skeggs
2007-08-10nouveau: Allow creation of gpuobjs before any other init has taken place.Ben Skeggs
2007-08-09After calling drm_sman_cleanup, mark both heaps as uninitialized.Ian Romanick
Since the heaps weren't marked as uninitialized, SG memory was never re-allocated. This prevented the X-server from being able to restart without re-loading the kernel module.
2007-08-09Use DRM_MEMORYBARRIER() macro instead of mb().Ian Romanick
2007-08-09Mask off correct bits in M2REG_AUTO_LINK_STATUS for interrupt handling.Ian Romanick
2007-08-09Minor clean up of IRQ code. Much, much more to come.Ian Romanick
2007-08-09Use sman memory manager instead of internal version.Ian Romanick
2007-08-09Unify alloc and free ioctls.Ian Romanick
The DRM_XGI_PCIE_ALLOC and DRM_XGI_FB_ALLOC ioctls (and the matching free ioctls) are unified to DRM_XGI_ALLOC. The desired memory region is selected by xgi_mem_alloc::location. The region is magically encoded in xgi_mem_alloc::index, which is used to release the memory. Bump to version 0.11.0. This update requires a new DDX.
2007-08-09Associate master file pointer with command list buffer.Ian Romanick
Pass the master's file pointer, as supplied to xgi_bootstrap, to xgi_cmdlist_initialize. Associate that pointer with the memory allocated for the command list buffer. By doing this the memory will be automatically cleaned up when the master closes the device. This allows the removal of some clean up code.
2007-08-09nouveau: silence irq handler a bitBen Skeggs
2007-08-09nouveau/nv40: add some missing pciids.Ben Skeggs
2007-08-08nouveau : nv10, nv20, nv30 : don't save all channel in the same RAMFC entryMatthieu Castet
This should improve multi fifo
2007-08-08nouveau: Always allocate drm's push buffer in VRAMBen Skeggs
Fixes #11868
2007-08-08nouveau: return channel idBen Skeggs
2007-08-08nouveau/nv50: hack up initial channel context from current stateBen Skeggs
We really should be providing static values like the nv40 PGRAPH code does, however, this will do for now to keep X at least working.
2007-08-08nouveau: enable/disable engine-specific interrupts in _init()/_takedown()Ben Skeggs
All interrupts are still masked by PMC until init is finished.
2007-08-07nouveau : fix enable irq (in the previous code all irq were masked by engineMatthieu Castet
init after irq_postinstall)
2007-08-06Unify infrastructure for freeing on-card / GART memory.Ian Romanick
2007-08-06Release client memory in reclaim_buffers_idlelocked instead of preclose.Ian Romanick
2007-08-06Refactor xgi_(fb|pcie)_free_all into xgi_free_all.Ian Romanick
2007-08-06Replace per-heap semaphores with drm_device::struct_mutex.Ian Romanick
2007-08-06Unify infrastructure for allocating (not yet freeing) on-card / GART memory.Ian Romanick
2007-08-06Eliminate unnecessary function xgi_pcie_free_locked.Ian Romanick
2007-08-06Initialize the AGP structure's base address at init rather than enable.Eric Anholt
Not all drivers call enable (intel), but they would still like to use this member in driver code.
2007-08-06Finish removing allocation "owner" infrastructure.Ian Romanick
2007-08-06Eliminate special-case handling of framebuffer (fake) allocation.Ian Romanick
2007-08-06Eliminate allocation "owner" usage.Ian Romanick
2007-08-07nouveau: Init global gpuobj list early, unbreaks sgdma code.Ben Skeggs
2007-08-06nouveau: Bump PCI GART to 16MBStephane Marchesin
2007-08-06nouveau: ouch, add nouveau_dma.[ch] files..Ben Skeggs
2007-08-06Export some useful ttm functions to drivers.Ben Skeggs
2007-08-06nouveau: Remove PGRAPH_SURFACE hack, it wont work now anyway.Ben Skeggs
Need to find another way of doing this, ideally someone'd hunt down which object/method controls it! The Xv blit adaptor is likely now broken on cards that have pNv->WaitVSyncPossible enabled.
2007-08-06nouveau: Give DRM its own gpu channelBen Skeggs
If your card doesn't have working context switching, it is now broken.
2007-08-06nouveau: Determine trapped channel id from active grctx on >=NV40Ben Skeggs
2007-08-06nouveau: Various internal and external API changesBen Skeggs
1. DRM_NOUVEAU_GPUOBJ_FREE Used to free GPU objects. The obvious usage case is for Gr objects, but notifiers can also be destroyed in the same way. GPU objects gain a destructor method and private data fields with this change, so other specialised cases (like notifiers) can be implemented on top of gpuobjs. 2. DRM_NOUVEAU_CHANNEL_FREE 3. DRM_NOUVEAU_CARD_INIT Ideally we'd do init during module load, but this isn't currently possible. Doing init during firstopen() is bad as X has a love of opening/closing the DRM many times during startup. Once the modesetting-101 branch is merged this can go away. IRQs are enabled in nouveau_card_init() now, rather than having the X server call drmCtlInstHandler(). We'll need this for when we give the kernel module its own channel. 4. DRM_NOUVEAU_GETPARAM Add CHIPSET_ID value, which will return the chipset id derived from NV_PMC_BOOT_0. 4. Use list_* in a few places, rather than home-brewed stuff.
2007-08-06nouveau: Pass channel struct around instead of channel id.Ben Skeggs
2007-08-03nouveau:nv10: fill and use load,save graph context functionsPatrice Mandin
2007-08-02Remove the pinned buffer from the LRU when pinning.Eric Anholt
Also, be a little safer with setting the pinned flag within the struct lock. I'm not 100% sure if this is required, but it seems like it might be.