| Age | Commit message (Collapse) | Author |
|---|
|
|
|
|
|
|
|
that particular file. Its contents have changed a good bit since the
original sis code, and the original sis code didn't care much about
attribution since it routinely disclaims Precision Insight/VA Linux
from responsibility. Also, adjust formatting around license headers
(have a comment open immediately before the "Copyright" line, not as a
runon of any previous comments) for automatic processing into FreeBSD,
where /*- is used to signal the beginning of license headers for
automatic compilation of license lists.
|
|
radeon_cp.c to use a drm_local_map_t-type mapping (drm_core_ioremap
rather than drm_ioremap), which contains private device mapping
information on BSD. I also changed the ati_pcigart interface to use
"void *" for pointers to kva rather than "unsigned long". While PCIGART
support appears to be broken on FreeBSD currently, I think this is not
new, and BusType PCI remains working on my r100 in Linux.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
understandable: preinit -> load postinit -> (removed) presetup ->
firstopen postsetup -> (removed) open_helper -> open prerelease ->
preclose free_filp_priv -> postclose pretakedown -> lastclose
postcleanup -> unload release -> reclaim_buffers_locked version ->
(removed)
postinit and version were replaced with generic code in the Linux DRM
(drivers now set their version numbers and description in the driver
structure, like on BSD). postsetup wasn't used at all. Fixes the savage
hooks for initializing and tearing down mappings at the right times.
Testing involved at least starting X, running glxgears, killing
glxgears, exiting X, and repeating.
Tested on: FreeBSD (g200, g400, r200, r128) Linux (r200, savage4)
|
|
the driver already knew their correct value. For example the physical
address of the framebuffer and registers.
|
|
with BSD fix from jkim and the r300_reg.h license from Nicolai Haehnle.
Big thanks to everyone involved!
|
|
code duplication, and it also hands you the map pointer so you don't
need to re-find it.
- Remove the permanent maps flag. Instead, for register and framebuffer
maps, we always check whether there's already a map of that type and
offset around. Move the Radeon map initialization into presetup (first
open) so it happens again after every takedown.
- Remove the split cleanup of maps between driver takedown (last close) and
cleanup (module unload). Instead, always tear down maps on takedown,
and drivers can recreate them on first open.
- Make MGA always use addmap, instead of allocating consistent memory in
the PCI case and then faking up a map for it, which accomplished nearly
the same thing, in a different order. Note that the maps are exposed to
the user again: we may want to expose a flag to avoid this, but it's
not a security concern, and saves us a lot of code.
- Remove rmmaps in the MGA driver. Since the function is only called during
takedown anyway, we can let them die a natural death.
- Make removal of maps happen in one function, which is called by both
drm_takedown and drm_rmmap_ioctl.
Reviewed by: idr (previous revision) Tested on: mga (old/new/pci dma),
radeon, savage
|
|
zero does not mean no privs, instead it grants write access
_DRM_READ_ONLY only applies to non-root users. Problem is only in CVS,
initmaps are not in the kernel yet.
|
|
radeonfb.
|
|
sleep-with- mutex held. This probably ought to be an os-independent
sleep function ala DRM_USLEEP.
|
|
|
|
FreeBSD. Add drm_get_resource_{start|len} so linux-specific stuff
doesn't need to be in shared code.
- Fix mach64 build by using __DECONST to work around passing a const
pointer to useracc, which is unfortunately not marked const.
- Get rid of a lot of maplist code by not having dev->maplist be a pointer,
and by sticking the link entries directly in drm_local_map_t rather
than having a separate structure for the linked list.
- Factor out map uninit and removal into its own routine, rather than
duplicating in both drm_takedown() and drm_rmmap().
- Hook up more driver functions, and correct FreeBSD-specific bits of
radeon_cp.c, making radeon work.
- Baby steps towards using bus_space as we should.
|
|
|
|
drm. Add new ioctls to manage surfaces which cover the tiled areas
|
|
|
|
clear and z buffer compression are working correctly, hierarchical-z is
not.
|
|
doesn't run yet. Moves the ioctl definitions for these two drivers back
to the shared code -- they aren't OS-specific.
|
|
helping
2D operations.
Ups radeon to version 1.12.0, Vladimir, you might want to add any extra
pciids...
Approved-by: Dave Airlie <airlied@linux.ie>
|
|
functions are not identical.
|
|
weren't Lindent's because their comments didn't convert very well. A
bunch of other minor clean up with no code implact included.
|
|
get_order from drm_order.
|
|
|
|
VGA driver when it gets written.
|
|
|
|
files to the linux build but not to the BSD directories.
|
|
code Linux specific.
|
|
|
|
|
|
|
|
dev_priv live always, and add AGP detection in kernel patch:
radeon-pre-2.patch From: Jon Smirl
|
|
|
|
anything, and took up valuable KVA. While I'm in the area, clean up BSD
MTRR stuff some more.
Suggested by: jonsmirl
|
|
a busid that doesn't correspond to the device the DRM is attached to.
This is a breaking of backwards-compatibility only for the
multiple-DRI-head case with X Servers that don't use interface 1.1.
- Move irq_busid to drm_irq.h and make it only return the IRQ for the
current device. Retains compatibility with previous X Servers, cleans
up unnecessary code. This means no irq_busid on !__HAVE_IRQ, but can be
changed if necessary.
- Bump interface version to 1.2. This version when set signifies that the
control ioctl should ignore the irq number passed in and enable the
interrupt handler for the attached device. Otherwise it errors out when
the passed-in irq is not equal to the device's.
- Store the highest version the interface has been set to in the device.
- Fix a recursion on DRM_LOCK in irq_uninstall on FreeBSD. This leaves
irq_uninstall being done without the lock in some cases, but it was
racey anyways.
|
|
the 2D driver initializes MC_FB_LOCATION and related registers sanely
the DRM deduces the layout from these registers
clients use the new SETPARAM ioctl to tell the DRM where they think the
framebuffer is located in the card's address space
the DRM uses all this information to check client state and fix it up if
necessary
This is a prerequisite for things like direct rendering with IGP chips and
video capturing.
|
|
from __HAVE_DMA. This will be useful for adding vblank sync support to
sis and tdfx. Rename dma_service to irq_handler, which is more
accurately what it is.
- Fix the #if _HAVE_DMA_IRQ in radeon, r128, mga, i810, i830, gamma to have
the right number of underscores. This may have been a problem in the
case that the server died without doing its DRM_IOCTL_CONTROL to
uninit.
|
|
appropriate
|
|
|
|
|
|
the CPU (David Mosberger, Benjamin Herrenschmidt, myself, Paul
Mackerras, Jeff Wiedemeier)
|
|
|
|
irq handler in DRM(irq_install). Modify all drivers to ensure irq
handler is removed before cleanup and cleanup is called at takedown.
Remove unused buffer private struct fields in i810, i830. Check for
lock on init/cleanup in all drivers except i810/i830. The current DDX
for i810 and i830 doesn't hold the lock on kernel init (FIXME?).
|
|
use correct address for ring read pointer writeback (yes, we seem to have
been running with bogus values for the ring read pointer, which
'worked' because the return value of radeon_wait_ring() is never
checked and the ring usually never fills up)
|
