summaryrefslogtreecommitdiff
path: root/shared-core
AgeCommit message (Collapse)Author
2008-03-17i915: safety check the sarea map still existsDave Airlie
2008-03-17initial r500 RS and FP register and upload codeDave Airlie
2008-03-17drm/pcigart: fix the pci gart to use the drm_pci wrapper.Dave Airlie
This is the correct fix for the RS690 and hopefully the dma coherent work. For now we limit everybody to a 32-bit DMA mask but it is possible for RS690 to use a 40-bit DMA mask for the GART table itself, and the PCIE cards can use 40-bits for the table entries. Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-03-16Avoid unnecessary waits for command regulator pause.Thomas Hellstrom
2008-03-16[via] Remove some leftover vars.Thomas Hellstrom
2008-03-16[via] The millionth fixup for the millionth-1 attempt to stabilize the AGPThomas Hellstrom
DMA command submission. It's worth remembering that all new bright ideas on how to make this command reader work properly and according to docs will probably fail :( Bring in some old code.
2008-03-16[via] Fix driver after vblank-rework merge.Thomas Hellstrom
2008-03-16drm/rs690: set AGP_BASE_2 to 0Dave Airlie
2008-03-16drm: set rs690 gart base completly.Dave Airlie
The docs state bits 4-11 represent bits 32-39 of a 40-bit address
2008-03-12Fix chip family for RV550Alex Deucher
2008-03-13nv50: force channel vram access through vmBen Skeggs
If we ever want to be able to use the 3D engine we have no choice. It appears that the tiling setup (required for 3D on G8x) is in the page tables. The immediate benefit of this change however is that it's now not possible for a client to use the GPU to render over the top of important engine setup tables, which also live in VRAM. G8x VRAM size is limited to 512MiB at the moment, as we use a 1-1 mapping of real vram pages to their offset within the start of a channel's VRAM DMA object and only populate a single PDE for VRAM use.
2008-03-12Merge branch 'intel-post-reloc'Thomas Hellstrom
Conflicts: linux-core/drm_compat.c linux-core/drm_compat.h linux-core/drm_ttm.c shared-core/i915_dma.c Bump driver minor to 13 due to introduction of new relocation type.
2008-03-12Merge branch 'master' of git+ssh://git.freedesktop.org/git/mesa/drm into ↵Alan Hourihane
modesetting-101 Conflicts: shared-core/i915_dma.c shared-core/i915_drv.h shared-core/i915_irq.c
2008-03-12Avoid large kmallocs.Thomas Hellstrom
2008-03-11global hotplug events happen in the pipe A stat register,Alan Hourihane
they are not pipe A specific. Remove pipe B code.
2008-03-11Add support for monitor hotplug signals/waitsAlan Hourihane
Also adjust i915 irq handling as it follows the 16bit'ism's of the i8xx series.
2008-03-11nouveau: move AGP reset to mem_init_agpStuart Bennett
Also, power cycle PGRAPH when resetting AGP -- it seems to fix problems encountered by p0g on nv25
2008-03-11drm: fix oops on unload.Dave Airlie
if we are unloading the module, there is no master so therefore no lock
2008-03-11drm: hopefully fix cursors on 965Dave Airlie
2008-03-10Merge branch 'modesetting-101' of ssh://git.freedesktop.org/git/mesa/drm ↵Jerome Glisse
into modesetting-101
2008-03-10rradeon_ms: rework fence code and bring radeon ms up to dateJerome Glisse
2008-03-08Switch from PIPE_VBLANK to PIPE_EVENT interrupts.Keith Packard
My 965GM gets interrupts stuck when using the old PIPE_VBLANK interrupt. Switch to the PIPE_EVENT interrupt mechanism, and set the PIPE*STAT registers to use START_VBLANK on 965 and VBLANK on previous chips.
2008-03-08drm/radeon: check sarea_priv existsDave Airlie
2008-03-07nouveau: redo channel idle detectionBen Skeggs
Will hopefully work a bit better than previous code, which depended on knowing the channel's most recent PUT value. Some chips always return 0 on reading these regs, and currently userspace is the only other entity which knows the value.
2008-03-07nouveau: don't touch NV_USER regs on channel destroy.Ben Skeggs
Not only was this entirely pointless, it actually causes my NV30GL to die randomly when channels are destroyed.
2008-03-07actually turn the irq offDave Airlie
2008-03-07I really screwed up that merge somehowDave Airlie
2008-03-07woah somehow got these upstreamDave Airlie
2008-03-06Merge branch 'master' of ../../drm into modesetting-101Dave Airlie
Conflicts: shared-core/drm.h
2008-03-06ttm: make sure userspace can't destroy kernel create memory managersDave Airlie
this adds something to say the kernel initialised the memory region not the userspace. and blocks userspace from deallocating kernel areas
2008-03-06drm/ttm: add ioctl to get back memory managed area sizedDave Airlie
taken from modesetting branch but could be useful outside it.
2008-03-06Merge branch 'master' of ../../drm into modesetting-101Dave Airlie
Conflicts: linux-core/drmP.h linux-core/drm_drv.c linux-core/drm_proc.c linux-core/drm_stub.c linux-core/drm_sysfs.c
2008-03-06drm: reorganise minor number handling using code from modesetting branchDave Airlie
Rip out the whole head thing and replace it with an idr and drm_minor structure.
2008-03-05i915: Evict if relocatee buffer is CACHED_MAPPED beforeXiang, Haihao
writting relocations, otherwise the GPU probably sees some inconsistent data. Fix fd.o bug#14656
2008-03-05drm: fixup compat with old x.org driversDave Airlie
2008-03-05Merge remote branch 'origin/master' into modesetting-101Dave Airlie
Conflicts: linux-core/drm_compat.c
2008-03-04Clarify when WAIT_LAZY is relevant to users.Eric Anholt
2008-03-04Remove unused DRM_FENCE_FLAG_WAIT_IGNORE_SIGNALS.Eric Anholt
2008-03-03 [i915] 2D driver may reset Frame count value, this may lead driverZou Nan hai
to leap it's vblank count a huge value. This will stall some applications that switch video mode if vblank_mode is set to a non zero value in drirc.
2008-03-02Add FENCE registers to MMIO listAlan Hourihane
2008-02-29Working revision.Thomas Hellstrom
2008-02-29More post-ioctl work.Thomas Hellstrom
2008-02-28drm: add modesetting as a driver feature.Dave Airlie
This change adds a driver feature that for i915 is controlled by a module parameter. You now need to do insmod i915.ko modeset=1 to enable it the modesetting paths. It also fixes up lots of X paths. I can run my new DDX driver on this code with and without modesetting enabled
2008-02-27Reinstate buffer idle before applying relocations.Thomas Hellstrom
2008-02-27Don't wait for buffer idle before applying relocations.Thomas Hellstrom
2008-02-26radeon: remove TTM from an earlier mergeJerome Glisse
2008-02-26Merge branch 'master' of git+ssh://git.freedesktop.org/git/mesa/drm into ↵Alan Hourihane
modesetting-101 Conflicts: shared-core/i915_dma.c
2008-02-26[i915] Relocation fixes.Thomas Hellstrom
2008-02-26i915: fix typosDave Airlie
2008-02-26i915_mmio: add overlay regsDave Airlie