summaryrefslogtreecommitdiff
path: root/shared-core/radeon_drv.h
AgeCommit message (Collapse)Author
2006-09-15Use register writes instead of BITBLT_MULTI packets for buffer swap blits.Michel Dänzer
This takes up two more ring buffer entries per rectangle blitted but makes sure the blit is performed top to bottom, reducing the likelyhood of tearing.
2006-09-12drm: use radeon specific names for radeon flagsDave Airlie
2006-08-28drm: lots of small cleanups and whitespace issues fixed upDave Airlie
remove a mach64 warning, align a lot of things from linux kernel
2006-07-26Bug #7629: Fix for CHIP_IS_AGP getting 'restored' with non-AGP cardsMichel Dänzer
Commit 2a47f6bfecea5dabcbf79d5e1aaf271f50070b89 caused the CHIP_IS_AGP flag to get 'restored' with PCI(e) cards. I can't think of a way to fix this without introducing a (otherwise redundant) CHIP_IS_PCI flag.
2006-07-19Use RADEON_RB3D_DSTCACHE_CTLSTAT instead of RADEON_RB2D_DSTCACHE_CTLSTAT.Michel Dänzer
The latter seems to be a read-only mirror of the former.
2006-07-19When writeback isn't used, actually disable it in the hardware.Michel Dänzer
Not doing this might waste bus bandwidth or even cause memory corruption or system crashes on systems that check bus transfers. No such incident has been reported though.
2006-05-24Add support for r200 vertex programs (R200_EMIT_VAP_PVS_CNTL, and newRoland Scheidegger
packet type for making it possible to address whole tcl vector space and have a larger count)
2006-05-20add forgotten register define for previous commitRoland Scheidegger
2006-03-25radeon fix up the PCI ids for new memory map like the kernel one.. notDave Airlie
perfect but should be very safe... align some other kernel bits i810 align with kernel
2006-03-06Add general-purpose packet for manipulating scratch registers (r300)Aapo Tahkola
2006-02-25Add all radeon pci ids known by ddx, but only r350/rv350 and below (newRoland Scheidegger
chips may be problematic). Leave the existing entries for new chips in though. Remove ids not known by ddx (secondary ids, non-existant,...). Correct some entries (name/family). Make the radeon family enum look more alike the ddx/dri versions. See #5413
2006-02-18add benh's memory management patchDave Airlie
2006-01-20Add support for texture cache flushes (R300_TX_CNTL)Aapo Tahkola
2006-01-02The radeon DRM wasn't passing sparse checking in the kernel, this fixes itDave Airlie
by adding a new kernel internal cmd buffer type, that has no userspace members, and passes it around.
2005-12-29add radeon card type get param so userspace can avoid walking PCIDave Airlie
2005-12-16fix radeon memory mapping from Ben HerrenschmidtDave Airlie
2005-12-05add texrect support for r300Dave Airlie
2005-11-11RV200 < R200Dave Airlie
2005-11-11cleanup ioctl/max_ioctl to use header file for extern symbolsDave Airlie
2005-09-30Add support to turn writeback off via radeon module optionDave Airlie
2005-09-11Add GART in FB support for ati pcigart, and PCIE support for r300Dave Airlie
2005-09-09Add support for GL_ATI_fragment_shader, new packets R200_EMIT_PP_AFS_0/1,Roland Scheidegger
R200_EMIT_PP_TXCTLALL_0-5 (replaces R200_EMIT_PP_TXFILTER_0-5, 2 more regs) and R200_EMIT_ATF_TFACTOR (replaces R200_EMIT_TFACTOR_0 (8 consts instead of 6)
2005-08-05Rename the driver hooks in the DRM to something a little moreEric Anholt
understandable: preinit -> load postinit -> (removed) presetup -> firstopen postsetup -> (removed) open_helper -> open prerelease -> preclose free_filp_priv -> postclose pretakedown -> lastclose postcleanup -> unload release -> reclaim_buffers_locked version -> (removed) postinit and version were replaced with generic code in the Linux DRM (drivers now set their version numbers and description in the driver structure, like on BSD). postsetup wasn't used at all. Fixes the savage hooks for initializing and tearing down mappings at the right times. Testing involved at least starting X, running glxgears, killing glxgears, exiting X, and repeating. Tested on: FreeBSD (g200, g400, r200, r128) Linux (r200, savage4)
2005-08-04Mark some radeon init variables deprecated. These used to be passed in butJon Smirl
the driver already knew their correct value. For example the physical address of the framebuffer and registers.
2005-07-27fix driver date and drm minor version for r300 supportRoland Scheidegger
2005-07-20Add latest r300 support from r300.sf.net CVS. Patch submitted by volodya,Eric Anholt
with BSD fix from jkim and the r300_reg.h license from Nicolai Haehnle. Big thanks to everyone involved!
2005-06-28- Remove drm_initmap and replace its usage with drm_addmap. This reducesEric Anholt
code duplication, and it also hands you the map pointer so you don't need to re-find it. - Remove the permanent maps flag. Instead, for register and framebuffer maps, we always check whether there's already a map of that type and offset around. Move the Radeon map initialization into presetup (first open) so it happens again after every takedown. - Remove the split cleanup of maps between driver takedown (last close) and cleanup (module unload). Instead, always tear down maps on takedown, and drivers can recreate them on first open. - Make MGA always use addmap, instead of allocating consistent memory in the PCI case and then faking up a map for it, which accomplished nearly the same thing, in a different order. Note that the maps are exposed to the user again: we may want to expose a flag to avoid this, but it's not a security concern, and saves us a lot of code. - Remove rmmaps in the MGA driver. Since the function is only called during takedown anyway, we can let them die a natural death. - Make removal of maps happen in one function, which is called by both drm_takedown and drm_rmmap_ioctl. Reviewed by: idr (previous revision) Tested on: mga (old/new/pci dma), radeon, savage
2005-06-28add compat code from Paul MackerrasDave Airlie
2005-06-19Remove I2C support from radeon driver. Same support is available fromJon Smirl
radeonfb.
2005-05-27add radeon registers from VHA code these are the "unknown" registersDave Airlie
2005-03-15add R200_EMIT_PP_TRI_PERF_CNTL packet to support brilinear filtering onRoland Scheidegger
r200
2005-03-04add some idct type 3 packets for referenceDave Airlie
2005-02-10add support for texture micro tiling on radeon/r200. Add support for r100Roland Scheidegger
cube maps (since it also requires a version bump) at the same time.
2005-02-08Close a race which could allow for privilege escalation by users with DRIEric Anholt
privileges on Radeon hardware. Essentially, a malicious program could submit a packet containing an offset (possibly in main memory) to be rendered from/to, while a separate thread switched that offset in userspace rapidly between a valid value and an invalid one. radeon_check_and_fixup_offset() would pull the offset in from user space, check it, and spit it back out to user space to be copied in later by the emit code. It would sometimes catch the bad value, but sometimes the malicious program could modify it after the check and get an invalid offset rendered from/to. Fix this by allocating a temporary buffer and copying the data in at once. While here, make the cliprects stuff not do the VERIFYAREA_READ and COPY_FROM_USER_UNCHECKED gymnastics, avoiding a lock order reversal on FreeBSD. Performance impact is negligible -- no difference on r200 to ~1% improvement on rv200 in quake3 tests (P4 1Ghz, demofour at 1024x768, n=4 or 5).
2005-02-01cleanup patch from Adrian Bunk <bunk@stusta.de>Dave Airlie
2005-01-27fix incorrect PCI id for ATI radeonDave Airlie
2005-01-26(Stephane Marchesin,me) Add radeon framebuffer tiling support to radeonRoland Scheidegger
drm. Add new ioctls to manage surfaces which cover the tiled areas
2005-01-26replace magic number with macro constant RADEON_ZBLOCK16Roland Scheidegger
2004-12-08(Stephane Marchesin, me) add hyperz support to radeon drm. Only fast zRoland Scheidegger
clear and z buffer compression are working correctly, hierarchical-z is not.
2004-11-06Move radeon i2c include to top of fileJon Smirl
2004-11-06Commit WIP of BSD conversion to core model. Compiles for r128, radeon, butEric Anholt
doesn't run yet. Moves the ioctl definitions for these two drivers back to the shared code -- they aren't OS-specific.
2004-10-10Vladimir requested support so we can at least load r300 microcode forDave Airlie
helping 2D operations. Ups radeon to version 1.12.0, Vladimir, you might want to add any extra pciids... Approved-by: Dave Airlie <airlied@linux.ie>
2004-09-30Lindent of core build. Drivers checked for no binary diffs. A few filesJon Smirl
weren't Lindent's because their comments didn't convert very well. A bunch of other minor clean up with no code implact included.
2004-09-27First check in for DRM that splits core from personality modulesJon Smirl
2004-09-24Create new linux-2.6 build. Move all gpl files into the 2.6 build. If youJon Smirl
edit files for 2.6 be sure and break the link to the 2.4 directory and copy the cvs history.
2004-09-17Add linux sysfs i2c support to radeon driver. This patch adds GPL licensedJon Smirl
files to the linux build but not to the BSD directories.
2004-09-14Add chip family names to the radeon driverJon Smirl
2004-08-24Merged drmfntbl-0-0-2Dave Airlie
2004-08-17Merged drmfntbl-0-0-1Dave Airlie
2004-08-17preparation patch for radeon permanent mapping registers/framebuffer makesDave Airlie
dev_priv live always, and add AGP detection in kernel patch: radeon-pre-2.patch From: Jon Smirl