Merge remote branch 'origin/modesetting-101' into modesetting-101

4 files changed, 987 insertions, 75 deletions

diff --git a/shared-core/drm.h b/shared-core/drm.h
index 3c59cd40..b5b0aa52 100644
--- a/shared-core/drm.h
+++ b/shared-core/drm.h
@@ -795,6 +795,7 @@ typedef struct drm_fence_arg {
 
 typedef enum {
 	drm_bo_type_dc,
+	drm_bo_type_kernel, /* for initial kernel allocations */
 	drm_bo_type_user,
 	drm_bo_type_fake
 }drm_bo_type_t;
@@ -888,6 +889,91 @@ typedef union drm_mm_init_arg{
 	} rep;
 } drm_mm_init_arg_t;
 
+/*
+ * Drm mode setting
+ */
+#define DRM_OUTPUT_NAME_LEN 32
+#define DRM_DISPLAY_MODE_LEN 32
+
+struct drm_mode_modeinfo {
+
+	unsigned int id;
+
+	unsigned int clock;
+	unsigned short hdisplay, hsync_start, hsync_end, htotal, hskew;
+	unsigned short vdisplay, vsync_start, vsync_end, vtotal, vscan;
+
+	unsigned int flags;
+
+	char name[DRM_DISPLAY_MODE_LEN];
+};
+
+struct drm_mode_card_res {
+
+	int count_fbs;
+	unsigned int __user *fb_id;
+
+	int count_crtcs;
+	unsigned int __user *crtc_id;
+
+	int count_outputs;
+	unsigned int __user *output_id;
+
+	int count_modes;
+        struct drm_mode_modeinfo __user *modes;
+
+};
+
+struct drm_mode_crtc {
+	unsigned int crtc_id; /**< Id */
+	unsigned int fb_id; /**< Id of framebuffer */
+
+	int x, y; /**< Position on the frameuffer */
+
+	unsigned int mode; /**< Current mode used */
+
+	int count_outputs;
+	unsigned int outputs; /**< Outputs that are connected */
+
+	int count_possibles;
+	unsigned int possibles; /**< Outputs that can be connected */
+
+	unsigned int __user *set_outputs; /**< Outputs to be connected */
+
+	int gamma_size;
+
+};
+
+struct drm_mode_get_output {
+
+	unsigned int output; /**< Id */
+	unsigned int crtc; /**< Id of crtc */
+	unsigned char name[DRM_OUTPUT_NAME_LEN];
+
+	unsigned int connection;
+	unsigned int mm_width, mm_height; /**< HxW in millimeters */
+	unsigned int subpixel;
+
+	int count_crtcs;
+	unsigned int crtcs; /**< possible crtc to connect to */
+
+	int count_clones;
+	unsigned int clones; /**< list of clones */
+
+	int count_modes;
+	unsigned int __user *modes; /**< list of modes it supports */
+
+};
+
+struct drm_mode_fb_cmd {
+        unsigned int buffer_id;
+        unsigned int width, height;
+        unsigned int pitch;
+        unsigned int bpp;
+        unsigned int handle;
+	unsigned int depth;
+};
+
 /**
  * \name Ioctls Definitions
  */
@@ -959,6 +1045,13 @@ typedef union drm_mm_init_arg{
 
 #define DRM_IOCTL_UPDATE_DRAW           DRM_IOW(0x3f, drm_update_draw_t)
 
+#define DRM_IOCTL_MODE_GETRESOURCES     DRM_IOWR(0xA0, struct drm_mode_card_res)
+#define DRM_IOCTL_MODE_GETCRTC          DRM_IOWR(0xA1, struct drm_mode_crtc)
+#define DRM_IOCTL_MODE_GETOUTPUT        DRM_IOWR(0xA2, struct drm_mode_get_output)
+#define DRM_IOCTL_MODE_SETCRTC          DRM_IOWR(0xA3, struct drm_mode_crtc)
+#define DRM_IOCTL_MODE_ADDFB            DRM_IOWR(0xA4, struct drm_mode_fb_cmd)
+#define DRM_IOCTL_MODE_RMFB             DRM_IOWR(0xA5, unsigned int)
+#define DRM_IOCTL_MODE_GETFB             DRM_IOWR(0xA6, struct drm_mode_fb_cmd)
 /*@}*/
 
 /**
diff --git a/shared-core/i915_dma.c b/shared-core/i915_dma.c
index f66c08e6..cf729c6f 100644
--- a/shared-core/i915_dma.c
+++ b/shared-core/i915_dma.c
@@ -31,13 +31,6 @@
 #include "i915_drm.h"
 #include "i915_drv.h"
 
-#define IS_I965G(dev)  (dev->pci_device == 0x2972 || \
-			dev->pci_device == 0x2982 || \
-			dev->pci_device == 0x2992 || \
-			dev->pci_device == 0x29A2 || \
-			dev->pci_device == 0x2A02)
-
-
 /* Really want an OS-independent resettable timer.  Would like to have
  * this loop run for (eg) 3 sec, but have the timer reset every time
  * the head pointer changes, so that EBUSY only happens if the ring
@@ -85,8 +78,9 @@ void i915_kernel_lost_context(drm_device_t * dev)
 		dev_priv->sarea_priv->perf_boxes |= I915_BOX_RING_EMPTY;
 }
 
-static int i915_dma_cleanup(drm_device_t * dev)
+int i915_dma_cleanup(drm_device_t * dev)
 {
+	drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
 	/* Make sure interrupts are disabled here because the uninstall ioctl
 	 * may not have been called from userspace and after dev_private
 	 * is freed, it's too late.
@@ -94,25 +88,16 @@ static int i915_dma_cleanup(drm_device_t * dev)
 	if (dev->irq)
 		drm_irq_uninstall(dev);
 
-	if (dev->dev_private) {
-		drm_i915_private_t *dev_priv =
-		    (drm_i915_private_t *) dev->dev_private;
-
-		if (dev_priv->ring.virtual_start) {
-			drm_core_ioremapfree(&dev_priv->ring.map, dev);
-		}
-
-		if (dev_priv->status_page_dmah) {
-			drm_pci_free(dev, dev_priv->status_page_dmah);
-			/* Need to rewrite hardware status page */
-			I915_WRITE(0x02080, 0x1ffff000);
-		}
-
-		drm_free(dev->dev_private, sizeof(drm_i915_private_t),
-			 DRM_MEM_DRIVER);
-
-		dev->dev_private = NULL;
+	if (dev_priv->status_page_dmah) {
+		drm_pci_free(dev, dev_priv->status_page_dmah);
+		dev_priv->status_page_dmah = NULL;
+		dev_priv->hw_status_page = NULL;
+		dev_priv->dma_status_page = 0;
+		/* Need to rewrite hardware status page */
+		I915_WRITE(0x02080, 0x1ffff000);
 	}
+	
+	dev_priv->sarea_priv = NULL;
 
 	return 0;
 }
@@ -121,8 +106,6 @@ static int i915_initialize(drm_device_t * dev,
 			   drm_i915_private_t * dev_priv,
 			   drm_i915_init_t * init)
 {
-	memset(dev_priv, 0, sizeof(drm_i915_private_t));
-
 	DRM_GETSAREA();
 	if (!dev_priv->sarea) {
 		DRM_ERROR("can not find sarea!\n");
@@ -131,14 +114,6 @@ static int i915_initialize(drm_device_t * dev,
 		return DRM_ERR(EINVAL);
 	}
 
-	dev_priv->mmio_map = drm_core_findmap(dev, init->mmio_offset);
-	if (!dev_priv->mmio_map) {
-		dev->dev_private = (void *)dev_priv;
-		i915_dma_cleanup(dev);
-		DRM_ERROR("can not find mmio map!\n");
-		return DRM_ERR(EINVAL);
-	}
-
 	dev_priv->sarea_priv = (drm_i915_sarea_t *)
 	    ((u8 *) dev_priv->sarea->handle + init->sarea_priv_offset);
 
@@ -195,7 +170,9 @@ static int i915_initialize(drm_device_t * dev,
 
 	I915_WRITE(0x02080, dev_priv->dma_status_page);
 	DRM_DEBUG("Enabled hardware status page\n");
-	dev->dev_private = (void *)dev_priv;
+
+//drm_set_desired_modes(dev);
+
 	return 0;
 }
 
@@ -237,7 +214,7 @@ static int i915_dma_resume(drm_device_t * dev)
 static int i915_dma_init(DRM_IOCTL_ARGS)
 {
 	DRM_DEVICE;
-	drm_i915_private_t *dev_priv;
+	drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
 	drm_i915_init_t init;
 	int retcode = 0;
 
@@ -246,10 +223,6 @@ static int i915_dma_init(DRM_IOCTL_ARGS)
 
 	switch (init.func) {
 	case I915_INIT_DMA:
-		dev_priv = drm_alloc(sizeof(drm_i915_private_t),
-				     DRM_MEM_DRIVER);
-		if (dev_priv == NULL)
-			return DRM_ERR(ENOMEM);
 		retcode = i915_initialize(dev, dev_priv, &init);
 		break;
 	case I915_CLEANUP_DMA:
@@ -878,36 +851,6 @@ static int i915_mmio(DRM_IOCTL_ARGS)
 	return 0;
 }
 
-int i915_driver_load(drm_device_t *dev, unsigned long flags)
-{
-	/* i915 has 4 more counters */
-	dev->counters += 4;
-	dev->types[6] = _DRM_STAT_IRQ;
-	dev->types[7] = _DRM_STAT_PRIMARY;
-	dev->types[8] = _DRM_STAT_SECONDARY;
-	dev->types[9] = _DRM_STAT_DMA;
-
-	return 0;
-}
-
-void i915_driver_lastclose(drm_device_t * dev)
-{
-	if (dev->dev_private) {
-		drm_i915_private_t *dev_priv = dev->dev_private;
-		i915_do_cleanup_pageflip(dev);
-		i915_mem_takedown(&(dev_priv->agp_heap));
-	}
-	i915_dma_cleanup(dev);
-}
-
-void i915_driver_preclose(drm_device_t * dev, DRMFILE filp)
-{
-	if (dev->dev_private) {
-		drm_i915_private_t *dev_priv = dev->dev_private;
-		i915_mem_release(dev, filp, dev_priv->agp_heap);
-	}
-}
-
 drm_ioctl_desc_t i915_ioctls[] = {
 	[DRM_IOCTL_NR(DRM_I915_INIT)] = {i915_dma_init, DRM_AUTH|DRM_MASTER|DRM_ROOT_ONLY},
 	[DRM_IOCTL_NR(DRM_I915_FLUSH)] = {i915_flush_ioctl, DRM_AUTH},
@@ -948,8 +891,21 @@ int i915_driver_device_is_agp(drm_device_t * dev)
 
 int i915_driver_firstopen(struct drm_device *dev)
 {
-#ifdef I915_HAVE_BUFFER
-	drm_bo_driver_init(dev);
-#endif
+	drm_i915_private_t *dev_priv = dev->dev_private;
+	int ret;
+	DRM_DEBUG("\n");
+
+	if (!dev_priv->mmio_map) {
+		ret = drm_addmap(dev, dev_priv->mmiobase, dev_priv->mmiolen,
+				 _DRM_REGISTERS, _DRM_READ_ONLY, &dev_priv->mmio_map);
+		if (ret != 0) {
+			DRM_ERROR("Cannot add mapping for MMIO registers\n");
+			return ret;
+		}
+	}
+ 
+	DRM_DEBUG("dev_priv->mmio map is %p\n", dev_priv->mmio_map);
+
 	return 0;
 }
+
diff --git a/shared-core/i915_drv.h b/shared-core/i915_drv.h
index e8a7be29..c22ab843 100644
--- a/shared-core/i915_drv.h
+++ b/shared-core/i915_drv.h
@@ -92,6 +92,10 @@ typedef struct drm_i915_private {
 	drm_local_map_t *sarea;
 	drm_local_map_t *mmio_map;
 
+	unsigned long baseaddr;
+	unsigned long mmiobase;
+	unsigned long mmiolen;
+
 	drm_i915_sarea_t *sarea_priv;
 	drm_i915_ring_buffer_t ring;
 
@@ -130,6 +134,67 @@ typedef struct drm_i915_private {
 	spinlock_t swaps_lock;
 	drm_i915_vbl_swap_t vbl_swaps;
 	unsigned int swaps_pending;
+
+	/* LVDS info */
+	int backlight_duty_cycle;  /* restore backlight to this value */
+	bool panel_wants_dither;
+	struct drm_display_mode *panel_fixed_mode;
+
+	/* Register state */
+	u32 saveDSPACNTR;
+	u32 saveDSPBCNTR;
+	u32 savePIPEACONF;
+	u32 savePIPEBCONF;
+	u32 savePIPEASRC;
+	u32 savePIPEBSRC;
+	u32 saveFPA0;
+	u32 saveFPA1;
+	u32 saveDPLL_A;
+	u32 saveDPLL_A_MD;
+	u32 saveHTOTAL_A;
+	u32 saveHBLANK_A;
+	u32 saveHSYNC_A;
+	u32 saveVTOTAL_A;
+	u32 saveVBLANK_A;
+	u32 saveVSYNC_A;
+	u32 saveDSPASTRIDE;
+	u32 saveDSPASIZE;
+	u32 saveDSPAPOS;
+	u32 saveDSPABASE;
+	u32 saveDSPASURF;
+	u32 saveFPB0;
+	u32 saveFPB1;
+	u32 saveDPLL_B;
+	u32 saveDPLL_B_MD;
+	u32 saveHTOTAL_B;
+	u32 saveHBLANK_B;
+	u32 saveHSYNC_B;
+	u32 saveVTOTAL_B;
+	u32 saveVBLANK_B;
+	u32 saveVSYNC_B;
+	u32 saveDSPBSTRIDE;
+	u32 saveDSPBSIZE;
+	u32 saveDSPBPOS;
+	u32 saveDSPBBASE;
+	u32 saveDSPBSURF;
+	u32 saveVCLK_DIVISOR_VGA0;
+	u32 saveVCLK_DIVISOR_VGA1;
+	u32 saveVCLK_POST_DIV;
+	u32 saveVGACNTRL;
+	u32 saveADPA;
+	u32 saveLVDS;
+	u32 saveDVOA;
+	u32 saveDVOB;
+	u32 saveDVOC;
+	u32 savePP_ON;
+	u32 savePP_OFF;
+	u32 savePP_CONTROL;
+	u32 savePP_CYCLE;
+	u32 savePFIT_CONTROL;
+	u32 savePaletteA[256];
+	u32 savePaletteB[256];
+	u32 saveSWF[17];
+	u32 saveBLC_PWM_CTL;
 } drm_i915_private_t;
 
 enum intel_chip_family {
@@ -145,6 +210,8 @@ extern int i915_max_ioctl;
 				/* i915_dma.c */
 extern void i915_kernel_lost_context(drm_device_t * dev);
 extern int i915_driver_load(struct drm_device *, unsigned long flags);
+extern int i915_driver_unload(drm_device_t *dev);
+extern int i915_driver_firstopen(struct drm_device *dev);
 extern void i915_driver_lastclose(drm_device_t * dev);
 extern void i915_driver_preclose(drm_device_t * dev, DRMFILE filp);
 extern int i915_driver_device_is_agp(drm_device_t * dev);
@@ -206,6 +273,12 @@ extern int i915_move(drm_buffer_object_t *bo, int evict,
 
 #endif
 
+
+/* modesetting */
+extern void intel_modeset_init(drm_device_t *dev);
+extern void intel_modeset_cleanup(drm_device_t *dev);
+
+
 #define I915_READ(reg)          DRM_READ32(dev_priv->mmio_map, (reg))
 #define I915_WRITE(reg,val)     DRM_WRITE32(dev_priv->mmio_map, (reg), (val))
 #define I915_READ16(reg) 	DRM_READ16(dev_priv->mmio_map, (reg))
@@ -245,6 +318,27 @@ extern int i915_move(drm_buffer_object_t *bo, int evict,
 
 extern int i915_wait_ring(drm_device_t * dev, int n, const char *caller);
 
+/*
+ * The Bridge device's PCI config space has information about the
+ * fb aperture size and the amount of pre-reserved memory.
+ */
+#define INTEL_GMCH_CTRL		0x52
+#define INTEL_GMCH_ENABLED	0x4
+#define INTEL_GMCH_MEM_MASK	0x1
+#define INTEL_GMCH_MEM_64M	0x1
+#define INTEL_GMCH_MEM_128M	0
+
+#define INTEL_855_GMCH_GMS_MASK		(0x7 << 4)
+#define INTEL_855_GMCH_GMS_DISABLED	(0x0 << 4)
+#define INTEL_855_GMCH_GMS_STOLEN_1M	(0x1 << 4)
+#define INTEL_855_GMCH_GMS_STOLEN_4M	(0x2 << 4)
+#define INTEL_855_GMCH_GMS_STOLEN_8M	(0x3 << 4)
+#define INTEL_855_GMCH_GMS_STOLEN_16M	(0x4 << 4)
+#define INTEL_855_GMCH_GMS_STOLEN_32M	(0x5 << 4)
+
+#define INTEL_915G_GMCH_GMS_STOLEN_48M	(0x6 << 4)
+#define INTEL_915G_GMCH_GMS_STOLEN_64M	(0x7 << 4)
+
 #define GFX_OP_USER_INTERRUPT 		((0<<29)|(2<<23))
 #define GFX_OP_BREAKPOINT_INTERRUPT	((0<<29)|(1<<23))
 #define CMD_REPORT_HEAD			(7<<23)
@@ -273,6 +367,30 @@ extern int i915_wait_ring(drm_device_t * dev, int n, const char *caller);
 #define I915_VBLANK_INTERRUPT_ENABLE	(1UL<<17)
 #define I915_VBLANK_CLEAR		(1UL<<1)
 
+#define GPIOA			0x5010
+#define GPIOB			0x5014
+#define GPIOC			0x5018
+#define GPIOD			0x501c
+#define GPIOE			0x5020
+#define GPIOF			0x5024
+#define GPIOG			0x5028
+#define GPIOH			0x502c
+# define GPIO_CLOCK_DIR_MASK		(1 << 0)
+# define GPIO_CLOCK_DIR_IN		(0 << 1)
+# define GPIO_CLOCK_DIR_OUT		(1 << 1)
+# define GPIO_CLOCK_VAL_MASK		(1 << 2)
+# define GPIO_CLOCK_VAL_OUT		(1 << 3)
+# define GPIO_CLOCK_VAL_IN		(1 << 4)
+# define GPIO_CLOCK_PULLUP_DISABLE	(1 << 5)
+# define GPIO_DATA_DIR_MASK		(1 << 8)
+# define GPIO_DATA_DIR_IN		(0 << 9)
+# define GPIO_DATA_DIR_OUT		(1 << 9)
+# define GPIO_DATA_VAL_MASK		(1 << 10)
+# define GPIO_DATA_VAL_OUT		(1 << 11)
+# define GPIO_DATA_VAL_IN		(1 << 12)
+# define GPIO_DATA_PULLUP_DISABLE	(1 << 13)
+
+
 #define SRX_INDEX		0x3c4
 #define SRX_DATA		0x3c5
 #define SR01			1
@@ -281,6 +399,8 @@ extern int i915_wait_ring(drm_device_t * dev, int n, const char *caller);
 #define PPCR			0x61204
 #define PPCR_ON			(1<<0)
 
+#define DVOA			0x61120
+#define DVOA_ON			(1<<31)
 #define DVOB			0x61140
 #define DVOB_ON			(1<<31)
 #define DVOC			0x61160
@@ -363,4 +483,443 @@ extern int i915_wait_ring(drm_device_t * dev, int n, const char *caller);
 
 #define READ_BREADCRUMB(dev_priv)  (((volatile u32*)(dev_priv->hw_status_page))[5])
 #define READ_HWSP(dev_priv, reg)  (((volatile u32*)(dev_priv->hw_status_page))[reg])
+
+#define BLC_PWM_CTL		0x61254
+#define BACKLIGHT_MODULATION_FREQ_SHIFT		(17)
+/**
+ * This is the most significant 15 bits of the number of backlight cycles in a
+ * complete cycle of the modulated backlight control.
+ *
+ * The actual value is this field multiplied by two.
+ */
+#define BACKLIGHT_MODULATION_FREQ_MASK		(0x7fff << 17)
+#define BLM_LEGACY_MODE				(1 << 16)
+/**
+ * This is the number of cycles out of the backlight modulation cycle for which
+ * the backlight is on.
+ *
+ * This field must be no greater than the number of cycles in the complete
+ * backlight modulation cycle.
+ */
+#define BACKLIGHT_DUTY_CYCLE_SHIFT		(0)
+#define BACKLIGHT_DUTY_CYCLE_MASK		(0xffff)
+
+#define I915_GCFGC			0xf0
+#define I915_LOW_FREQUENCY_ENABLE		(1 << 7)
+#define I915_DISPLAY_CLOCK_190_200_MHZ		(0 << 4)
+#define I915_DISPLAY_CLOCK_333_MHZ		(4 << 4)
+#define I915_DISPLAY_CLOCK_MASK			(7 << 4)
+
+#define I855_HPLLCC			0xc0
+#define I855_CLOCK_CONTROL_MASK			(3 << 0)
+#define I855_CLOCK_133_200			(0 << 0)
+#define I855_CLOCK_100_200			(1 << 0)
+#define I855_CLOCK_100_133			(2 << 0)
+#define I855_CLOCK_166_250			(3 << 0)
+
+/* I830 CRTC registers */
+#define HTOTAL_A	0x60000
+#define HBLANK_A	0x60004
+#define HSYNC_A 	0x60008
+#define VTOTAL_A	0x6000c
+#define VBLANK_A	0x60010
+#define VSYNC_A 	0x60014
+#define PIPEASRC	0x6001c
+#define BCLRPAT_A	0x60020
+#define VSYNCSHIFT_A	0x60028
+
+#define HTOTAL_B	0x61000
+#define HBLANK_B	0x61004
+#define HSYNC_B 	0x61008
+#define VTOTAL_B	0x6100c
+#define VBLANK_B	0x61010
+#define VSYNC_B 	0x61014
+#define PIPEBSRC	0x6101c
+#define BCLRPAT_B	0x61020
+#define VSYNCSHIFT_B	0x61028
+
+#define PP_STATUS	0x61200
+# define PP_ON					(1 << 31)
+/**
+ * Indicates that all dependencies of the panel are on:
+ *
+ * - PLL enabled
+ * - pipe enabled
+ * - LVDS/DVOB/DVOC on
+ */
+# define PP_READY				(1 << 30)
+# define PP_SEQUENCE_NONE			(0 << 28)
+# define PP_SEQUENCE_ON				(1 << 28)
+# define PP_SEQUENCE_OFF			(2 << 28)
+# define PP_SEQUENCE_MASK			0x30000000
+#define PP_CONTROL	0x61204
+# define POWER_TARGET_ON			(1 << 0)
+
+#define LVDSPP_ON       0x61208
+#define LVDSPP_OFF      0x6120c
+#define PP_CYCLE        0x61210
+
+#define PFIT_CONTROL	0x61230
+# define PFIT_ENABLE				(1 << 31)
+# define PFIT_PIPE_MASK				(3 << 29)
+# define PFIT_PIPE_SHIFT			29
+# define VERT_INTERP_DISABLE			(0 << 10)
+# define VERT_INTERP_BILINEAR			(1 << 10)
+# define VERT_INTERP_MASK			(3 << 10)
+# define VERT_AUTO_SCALE			(1 << 9)
+# define HORIZ_INTERP_DISABLE			(0 << 6)
+# define HORIZ_INTERP_BILINEAR			(1 << 6)
+# define HORIZ_INTERP_MASK			(3 << 6)
+# define HORIZ_AUTO_SCALE			(1 << 5)
+# define PANEL_8TO6_DITHER_ENABLE		(1 << 3)
+
+#define PFIT_PGM_RATIOS	0x61234
+# define PFIT_VERT_SCALE_MASK			0xfff00000
+# define PFIT_HORIZ_SCALE_MASK			0x0000fff0
+
+#define PFIT_AUTO_RATIOS	0x61238
+
+
+#define DPLL_A		0x06014
+#define DPLL_B		0x06018
+# define DPLL_VCO_ENABLE			(1 << 31)
+# define DPLL_DVO_HIGH_SPEED			(1 << 30)
+# define DPLL_SYNCLOCK_ENABLE			(1 << 29)
+# define DPLL_VGA_MODE_DIS			(1 << 28)
+# define DPLLB_MODE_DAC_SERIAL			(1 << 26) /* i915 */
+# define DPLLB_MODE_LVDS			(2 << 26) /* i915 */
+# define DPLL_MODE_MASK				(3 << 26)
+# define DPLL_DAC_SERIAL_P2_CLOCK_DIV_10	(0 << 24) /* i915 */
+# define DPLL_DAC_SERIAL_P2_CLOCK_DIV_5		(1 << 24) /* i915 */
+# define DPLLB_LVDS_P2_CLOCK_DIV_14		(0 << 24) /* i915 */
+# define DPLLB_LVDS_P2_CLOCK_DIV_7		(1 << 24) /* i915 */
+# define DPLL_P2_CLOCK_DIV_MASK			0x03000000 /* i915 */
+# define DPLL_FPA01_P1_POST_DIV_MASK		0x00ff0000 /* i915 */
+/**
+ *  The i830 generation, in DAC/serial mode, defines p1 as two plus this
+ * bitfield, or just 2 if PLL_P1_DIVIDE_BY_TWO is set.
+ */
+# define DPLL_FPA01_P1_POST_DIV_MASK_I830	0x001f0000
+/**
+ * The i830 generation, in LVDS mode, defines P1 as the bit number set within
+ * this field (only one bit may be set).
+ */
+# define DPLL_FPA01_P1_POST_DIV_MASK_I830_LVDS	0x003f0000
+# define DPLL_FPA01_P1_POST_DIV_SHIFT		16
+# define PLL_P2_DIVIDE_BY_4			(1 << 23) /* i830, required in DVO non-gang */
+# define PLL_P1_DIVIDE_BY_TWO			(1 << 21) /* i830 */
+# define PLL_REF_INPUT_DREFCLK			(0 << 13)
+# define PLL_REF_INPUT_TVCLKINA			(1 << 13) /* i830 */
+# define PLL_REF_INPUT_TVCLKINBC		(2 << 13) /* SDVO TVCLKIN */
+# define PLLB_REF_INPUT_SPREADSPECTRUMIN	(3 << 13)
+# define PLL_REF_INPUT_MASK			(3 << 13)
+# define PLL_LOAD_PULSE_PHASE_SHIFT		9
+/*
+ * Parallel to Serial Load Pulse phase selection.
+ * Selects the phase for the 10X DPLL clock for the PCIe
+ * digital display port. The range is 4 to 13; 10 or more
+ * is just a flip delay. The default is 6
+ */
+# define PLL_LOAD_PULSE_PHASE_MASK		(0xf << PLL_LOAD_PULSE_PHASE_SHIFT)
+# define DISPLAY_RATE_SELECT_FPA1		(1 << 8)
+
+/**
+ * SDVO multiplier for 945G/GM. Not used on 965.
+ *
+ * \sa DPLL_MD_UDI_MULTIPLIER_MASK
+ */
+# define SDVO_MULTIPLIER_MASK			0x000000ff
+# define SDVO_MULTIPLIER_SHIFT_HIRES		4
+# define SDVO_MULTIPLIER_SHIFT_VGA		0
+
+/** @defgroup DPLL_MD
+ * @{
+ */
+/** Pipe A SDVO/UDI clock multiplier/divider register for G965. */
+#define DPLL_A_MD		0x0601c
+/** Pipe B SDVO/UDI clock multiplier/divider register for G965. */
+#define DPLL_B_MD		0x06020
+/**
+ * UDI pixel divider, controlling how many pixels are stuffed into a packet.
+ *
+ * Value is pixels minus 1.  Must be set to 1 pixel for SDVO.
+ */
+# define DPLL_MD_UDI_DIVIDER_MASK		0x3f000000
+# define DPLL_MD_UDI_DIVIDER_SHIFT		24
+/** UDI pixel divider for VGA, same as DPLL_MD_UDI_DIVIDER_MASK. */
+# define DPLL_MD_VGA_UDI_DIVIDER_MASK		0x003f0000
+# define DPLL_MD_VGA_UDI_DIVIDER_SHIFT		16
+/**
+ * SDVO/UDI pixel multiplier.
+ *
+ * SDVO requires that the bus clock rate be between 1 and 2 Ghz, and the bus
+ * clock rate is 10 times the DPLL clock.  At low resolution/refresh rate
+ * modes, the bus rate would be below the limits, so SDVO allows for stuffing
+ * dummy bytes in the datastream at an increased clock rate, with both sides of
+ * the link knowing how many bytes are fill.
+ *
+ * So, for a mode with a dotclock of 65Mhz, we would want to double the clock
+ * rate to 130Mhz to get a bus rate of 1.30Ghz.  The DPLL clock rate would be
+ * set to 130Mhz, and the SDVO multiplier set to 2x in this register and
+ * through an SDVO command.
+ *
+ * This register field has values of multiplication factor minus 1, with
+ * a maximum multiplier of 5 for SDVO.
+ */
+# define DPLL_MD_UDI_MULTIPLIER_MASK		0x00003f00
+# define DPLL_MD_UDI_MULTIPLIER_SHIFT		8
+/** SDVO/UDI pixel multiplier for VGA, same as DPLL_MD_UDI_MULTIPLIER_MASK. 
+ * This best be set to the default value (3) or the CRT won't work. No,
+ * I don't entirely understand what this does...
+ */
+# define DPLL_MD_VGA_UDI_MULTIPLIER_MASK	0x0000003f
+# define DPLL_MD_VGA_UDI_MULTIPLIER_SHIFT	0
+/** @} */
+
+#define DPLL_TEST		0x606c
+# define DPLLB_TEST_SDVO_DIV_1			(0 << 22)
+# define DPLLB_TEST_SDVO_DIV_2			(1 << 22)
+# define DPLLB_TEST_SDVO_DIV_4			(2 << 22)
+# define DPLLB_TEST_SDVO_DIV_MASK		(3 << 22)
+# define DPLLB_TEST_N_BYPASS			(1 << 19)
+# define DPLLB_TEST_M_BYPASS			(1 << 18)
+# define DPLLB_INPUT_BUFFER_ENABLE		(1 << 16)
+# define DPLLA_TEST_N_BYPASS			(1 << 3)
+# define DPLLA_TEST_M_BYPASS			(1 << 2)
+# define DPLLA_INPUT_BUFFER_ENABLE		(1 << 0)
+
+#define ADPA			0x61100
+#define ADPA_DAC_ENABLE 	(1<<31)
+#define ADPA_DAC_DISABLE	0
+#define ADPA_PIPE_SELECT_MASK	(1<<30)
+#define ADPA_PIPE_A_SELECT	0
+#define ADPA_PIPE_B_SELECT	(1<<30)
+#define ADPA_USE_VGA_HVPOLARITY (1<<15)
+#define ADPA_SETS_HVPOLARITY	0
+#define ADPA_VSYNC_CNTL_DISABLE (1<<11)
+#define ADPA_VSYNC_CNTL_ENABLE	0
+#define ADPA_HSYNC_CNTL_DISABLE (1<<10)
+#define ADPA_HSYNC_CNTL_ENABLE	0
+#define ADPA_VSYNC_ACTIVE_HIGH	(1<<4)
+#define ADPA_VSYNC_ACTIVE_LOW	0
+#define ADPA_HSYNC_ACTIVE_HIGH	(1<<3)
+#define ADPA_HSYNC_ACTIVE_LOW	0
+
+#define FPA0		0x06040
+#define FPA1		0x06044
+#define FPB0		0x06048
+#define FPB1		0x0604c
+# define FP_N_DIV_MASK				0x003f0000
+# define FP_N_DIV_SHIFT				16
+# define FP_M1_DIV_MASK				0x00003f00
+# define FP_M1_DIV_SHIFT			8
+# define FP_M2_DIV_MASK				0x0000003f
+# define FP_M2_DIV_SHIFT			0
+
+
+#define PORT_HOTPLUG_EN		0x61110
+# define SDVOB_HOTPLUG_INT_EN			(1 << 26)
+# define SDVOC_HOTPLUG_INT_EN			(1 << 25)
+# define TV_HOTPLUG_INT_EN			(1 << 18)
+# define CRT_HOTPLUG_INT_EN			(1 << 9)
+# define CRT_HOTPLUG_FORCE_DETECT		(1 << 3)
+
+#define PORT_HOTPLUG_STAT	0x61114
+# define CRT_HOTPLUG_INT_STATUS			(1 << 11)
+# define TV_HOTPLUG_INT_STATUS			(1 << 10)
+# define CRT_HOTPLUG_MONITOR_MASK		(3 << 8)
+# define CRT_HOTPLUG_MONITOR_COLOR		(3 << 8)
+# define CRT_HOTPLUG_MONITOR_MONO		(2 << 8)
+# define CRT_HOTPLUG_MONITOR_NONE		(0 << 8)
+# define SDVOC_HOTPLUG_INT_STATUS		(1 << 7)
+# define SDVOB_HOTPLUG_INT_STATUS		(1 << 6)
+
+#define SDVOB			0x61140
+#define SDVOC			0x61160
+#define SDVO_ENABLE				(1 << 31)
+#define SDVO_PIPE_B_SELECT			(1 << 30)
+#define SDVO_STALL_SELECT			(1 << 29)
+#define SDVO_INTERRUPT_ENABLE			(1 << 26)
+/**
+ * 915G/GM SDVO pixel multiplier.
+ *
+ * Programmed value is multiplier - 1, up to 5x.
+ *
+ * \sa DPLL_MD_UDI_MULTIPLIER_MASK
+ */
+#define SDVO_PORT_MULTIPLY_MASK			(7 << 23)
+#define SDVO_PORT_MULTIPLY_SHIFT		23
+#define SDVO_PHASE_SELECT_MASK			(15 << 19)
+#define SDVO_PHASE_SELECT_DEFAULT		(6 << 19)
+#define SDVO_CLOCK_OUTPUT_INVERT		(1 << 18)
+#define SDVOC_GANG_MODE				(1 << 16)
+#define SDVO_BORDER_ENABLE			(1 << 7)
+#define SDVOB_PCIE_CONCURRENCY			(1 << 3)
+#define SDVO_DETECTED				(1 << 2)
+/* Bits to be preserved when writing */
+#define SDVOB_PRESERVE_MASK			((1 << 17) | (1 << 16) | (1 << 14))
+#define SDVOC_PRESERVE_MASK			(1 << 17)
+
+/** @defgroup LVDS
+ * @{
+ */
+/**
+ * This register controls the LVDS output enable, pipe selection, and data
+ * format selection.
+ *
+ * All of the clock/data pairs are force powered down by power sequencing.
+ */
+#define LVDS			0x61180
+/**
+ * Enables the LVDS port.  This bit must be set before DPLLs are enabled, as
+ * the DPLL semantics change when the LVDS is assigned to that pipe.
+ */
+# define LVDS_PORT_EN			(1 << 31)
+/** Selects pipe B for LVDS data.  Must be set on pre-965. */
+# define LVDS_PIPEB_SELECT		(1 << 30)
+
+/**
+ * Enables the A0-A2 data pairs and CLKA, containing 18 bits of color data per
+ * pixel.
+ */
+# define LVDS_A0A2_CLKA_POWER_MASK	(3 << 8)
+# define LVDS_A0A2_CLKA_POWER_DOWN	(0 << 8)
+# define LVDS_A0A2_CLKA_POWER_UP	(3 << 8)
+/**
+ * Controls the A3 data pair, which contains the additional LSBs for 24 bit
+ * mode.  Only enabled if LVDS_A0A2_CLKA_POWER_UP also indicates it should be
+ * on.
+ */
+# define LVDS_A3_POWER_MASK		(3 << 6)
+# define LVDS_A3_POWER_DOWN		(0 << 6)
+# define LVDS_A3_POWER_UP		(3 << 6)
+/**
+ * Controls the CLKB pair.  This should only be set when LVDS_B0B3_POWER_UP
+ * is set.
+ */
+# define LVDS_CLKB_POWER_MASK		(3 << 4)
+# define LVDS_CLKB_POWER_DOWN		(0 << 4)
+# define LVDS_CLKB_POWER_UP		(3 << 4)
+
+/**
+ * Controls the B0-B3 data pairs.  This must be set to match the DPLL p2
+ * setting for whether we are in dual-channel mode.  The B3 pair will
+ * additionally only be powered up when LVDS_A3_POWER_UP is set.
+ */
+# define LVDS_B0B3_POWER_MASK		(3 << 2)
+# define LVDS_B0B3_POWER_DOWN		(0 << 2)
+# define LVDS_B0B3_POWER_UP		(3 << 2)
+
+#define PIPEACONF 0x70008
+#define PIPEACONF_ENABLE	(1<<31)
+#define PIPEACONF_DISABLE	0
+#define PIPEACONF_DOUBLE_WIDE	(1<<30)
+#define I965_PIPECONF_ACTIVE	(1<<30)
+#define PIPEACONF_SINGLE_WIDE	0
+#define PIPEACONF_PIPE_UNLOCKED 0
+#define PIPEACONF_PIPE_LOCKED	(1<<25)
+#define PIPEACONF_PALETTE	0
+#define PIPEACONF_GAMMA 	(1<<24)
+#define PIPECONF_FORCE_BORDER	(1<<25)
+#define PIPECONF_PROGRESSIVE	(0 << 21)
+#define PIPECONF_INTERLACE_W_FIELD_INDICATION	(6 << 21)
+#define PIPECONF_INTERLACE_FIELD_0_ONLY		(7 << 21)
+
+#define PIPEBCONF 0x71008
+#define PIPEBCONF_ENABLE	(1<<31)
+#define PIPEBCONF_DISABLE	0
+#define PIPEBCONF_DOUBLE_WIDE	(1<<30)
+#define PIPEBCONF_DISABLE	0
+#define PIPEBCONF_GAMMA 	(1<<24)
+#define PIPEBCONF_PALETTE	0
+
+#define PIPEBGCMAXRED		0x71010
+#define PIPEBGCMAXGREEN		0x71014
+#define PIPEBGCMAXBLUE		0x71018
+#define PIPEBSTAT		0x71024
+#define PIPEBFRAMEHIGH		0x71040
+#define PIPEBFRAMEPIXEL		0x71044
+
+#define DSPACNTR		0x70180
+#define DSPBCNTR		0x71180
+#define DISPLAY_PLANE_ENABLE 			(1<<31)
+#define DISPLAY_PLANE_DISABLE			0
+#define DISPPLANE_GAMMA_ENABLE			(1<<30)
+#define DISPPLANE_GAMMA_DISABLE			0
+#define DISPPLANE_PIXFORMAT_MASK		(0xf<<26)
+#define DISPPLANE_8BPP				(0x2<<26)
+#define DISPPLANE_15_16BPP			(0x4<<26)
+#define DISPPLANE_16BPP				(0x5<<26)
+#define DISPPLANE_32BPP_NO_ALPHA 		(0x6<<26)
+#define DISPPLANE_32BPP				(0x7<<26)
+#define DISPPLANE_STEREO_ENABLE			(1<<25)
+#define DISPPLANE_STEREO_DISABLE		0
+#define DISPPLANE_SEL_PIPE_MASK			(1<<24)
+#define DISPPLANE_SEL_PIPE_A			0
+#define DISPPLANE_SEL_PIPE_B			(1<<24)
+#define DISPPLANE_SRC_KEY_ENABLE		(1<<22)
+#define DISPPLANE_SRC_KEY_DISABLE		0
+#define DISPPLANE_LINE_DOUBLE			(1<<20)
+#define DISPPLANE_NO_LINE_DOUBLE		0
+#define DISPPLANE_STEREO_POLARITY_FIRST		0
+#define DISPPLANE_STEREO_POLARITY_SECOND	(1<<18)
+/* plane B only */
+#define DISPPLANE_ALPHA_TRANS_ENABLE		(1<<15)
+#define DISPPLANE_ALPHA_TRANS_DISABLE		0
+#define DISPPLANE_SPRITE_ABOVE_DISPLAYA		0
+#define DISPPLANE_SPRITE_ABOVE_OVERLAY		(1)
+
+#define DSPABASE		0x70184
+#define DSPASTRIDE		0x70188
+
+#define DSPBBASE		0x71184
+#define DSPBADDR		DSPBBASE
+#define DSPBSTRIDE		0x71188
+
+#define DSPAKEYVAL		0x70194
+#define DSPAKEYMASK		0x70198
+
+#define DSPAPOS			0x7018C /* reserved */
+#define DSPASIZE		0x70190
+#define DSPBPOS			0x7118C
+#define DSPBSIZE		0x71190
+
+#define DSPASURF		0x7019C
+#define DSPATILEOFF		0x701A4
+
+#define DSPBSURF		0x7119C
+#define DSPBTILEOFF		0x711A4
+
+#define VGACNTRL		0x71400
+# define VGA_DISP_DISABLE			(1 << 31)
+# define VGA_2X_MODE				(1 << 30)
+# define VGA_PIPE_B_SELECT			(1 << 29)
+
+/*
+ * Palette registers
+ */
+#define PALETTE_A		0x0a000
+#define PALETTE_B		0x0a800
+
+#define IS_I830(dev) ((dev)->pci_device == PCI_DEVICE_ID_INTEL_82830_CGC)
+#define IS_845G(dev) ((dev)->pci_device == PCI_DEVICE_ID_INTEL_82845G_IG)
+#define IS_I85X(dev) ((dev)->pci_device == PCI_DEVICE_ID_INTEL_82855GM_IG)
+#define IS_I855(dev) ((dev)->pci_device == PCI_DEVICE_ID_INTEL_82855GM_IG)
+#define IS_I865G(dev) ((dev)->pci_device == PCI_DEVICE_ID_INTEL_82865_IG)
+
+#define IS_I915G(pI810) (dev->pci_device == PCI_DEVICE_ID_INTEL_82915G_IG)/* || dev->pci_device == PCI_DEVICE_ID_INTELPCI_CHIP_E7221_G)*/
+#define IS_I915GM(pI810) ((dev)->pci_device == PCI_DEVICE_ID_INTEL_82915GM_IG)
+#define IS_I945G(dev) ((dev)->pci_device == PCI_DEVICE_ID_INTEL_82945G_IG)
+#define IS_I945GM(dev) ((dev)->pci_device == PCI_DEVICE_ID_INTEL_82945GM_IG)
+
+#define IS_I965G(dev) ((dev)->pci_device == 0x2972 || \
+		       (dev)->pci_device == 0x2982 || \
+		       (dev)->pci_device == 0x2992 || \
+		       (dev)->pci_device == 0x29A2)
+
+
+#define IS_I9XX(pI810) (IS_I915G(pI810) || IS_I915GM(pI810) || IS_I945G(pI810) || IS_I945GM(pI810) || IS_I965G(pI810))
+
+#define IS_MOBILE(pI810) (IS_I830(pI810) || IS_I85X(pI810) || IS_I915GM(pI810) || IS_I945GM(pI810))
+
 #endif
diff --git a/shared-core/i915_init.c b/shared-core/i915_init.c
new file mode 100644
index 00000000..ebe73815
--- /dev/null
+++ b/shared-core/i915_init.c
@@ -0,0 +1,304 @@
+/*
+ * Copyright (c) 2007 Intel Corporation
+ *   Jesse Barnes <jesse.barnes@intel.com>
+ *
+ * Copyright © 2002, 2003 David Dawes <dawes@xfree86.org>
+ *                   2004 Sylvain Meyer
+ *
+ * GPL/BSD dual license
+ */
+#include "drmP.h"
+#include "drm.h"
+#include "drm_sarea.h"
+#include "i915_drm.h"
+#include "i915_drv.h"
+
+/**
+ * i915_probe_agp - get AGP bootup configuration
+ * @pdev: PCI device
+ * @aperture_size: returns AGP aperture configured size
+ * @preallocated_size: returns size of BIOS preallocated AGP space
+ *
+ * Since Intel integrated graphics are UMA, the BIOS has to set aside
+ * some RAM for the framebuffer at early boot.  This code figures out
+ * how much was set aside so we can use it for our own purposes.
+ */
+int i915_probe_agp(struct pci_dev *pdev, unsigned long *aperture_size,
+		   unsigned long *preallocated_size)
+{
+	struct pci_dev *bridge_dev;
+	u16 tmp = 0;
+	unsigned long overhead;
+
+	bridge_dev = pci_get_bus_and_slot(0, PCI_DEVFN(0,0));
+	if (!bridge_dev) {
+		DRM_ERROR("bridge device not found\n");
+		return -1;
+	}
+
+	/* Get the fb aperture size and "stolen" memory amount. */
+	pci_read_config_word(bridge_dev, INTEL_GMCH_CTRL, &tmp);
+	pci_dev_put(bridge_dev);
+
+	*aperture_size = 1024 * 1024;
+	*preallocated_size = 1024 * 1024;
+
+	switch (pdev->device) {
+	case PCI_DEVICE_ID_INTEL_82830_CGC:
+	case PCI_DEVICE_ID_INTEL_82845G_HB:
+	case PCI_DEVICE_ID_INTEL_82855GM_IG:
+	case PCI_DEVICE_ID_INTEL_82865_IG:
+		if ((tmp & INTEL_GMCH_MEM_MASK) == INTEL_GMCH_MEM_64M)
+			*aperture_size *= 64;
+		else
+			*aperture_size *= 128;
+		break;
+	default:
+		/* 9xx supports large sizes, just look at the length */
+		*aperture_size = pci_resource_len(pdev, 2);
+		break;
+	}
+
+	/*
+	 * Some of the preallocated space is taken by the GTT
+	 * and popup.  GTT is 1K per MB of aperture size, and popup is 4K.
+	 */
+	overhead = (*aperture_size / 1024) + 4096;
+	switch (tmp & INTEL_855_GMCH_GMS_MASK) {
+	case INTEL_855_GMCH_GMS_STOLEN_1M:
+		break; /* 1M already */
+	case INTEL_855_GMCH_GMS_STOLEN_4M:
+		*preallocated_size *= 4;
+		break;
+	case INTEL_855_GMCH_GMS_STOLEN_8M:
+		*preallocated_size *= 8;
+		break;
+	case INTEL_855_GMCH_GMS_STOLEN_16M:
+		*preallocated_size *= 16;
+		break;
+	case INTEL_855_GMCH_GMS_STOLEN_32M:
+		*preallocated_size *= 32;
+		break;
+	case INTEL_915G_GMCH_GMS_STOLEN_48M:
+		*preallocated_size *= 48;
+		break;
+	case INTEL_915G_GMCH_GMS_STOLEN_64M:
+		*preallocated_size *= 64;
+		break;
+	case INTEL_855_GMCH_GMS_DISABLED:
+		DRM_ERROR("video memory is disabled\n");
+		return -1;
+	default:
+		DRM_ERROR("unexpected GMCH_GMS value: 0x%02x\n",
+			tmp & INTEL_855_GMCH_GMS_MASK);
+		return -1;
+	}
+	*preallocated_size -= overhead;
+
+	return 0;
+}
+
+/**
+ * i915_driver_load - setup chip and create an initial config
+ * @dev: DRM device
+ * @flags: startup flags
+ *
+ * The driver load routine has to do several things:
+ *   - drive output discovery via intel_modeset_init()
+ *   - initialize the memory manager
+ *   - allocate initial config memory
+ *   - setup the DRM framebuffer with the allocated memory
+ */
+int i915_driver_load(drm_device_t *dev, unsigned long flags)
+{
+	drm_i915_private_t *dev_priv;
+	drm_i915_init_t init;
+	drm_buffer_object_t *entry;
+	struct drm_framebuffer *fb;
+	unsigned long agp_size, prealloc_size;
+	int hsize, vsize, bytes_per_pixel, size, ret;
+
+	dev_priv = drm_alloc(sizeof(drm_i915_private_t), DRM_MEM_DRIVER);
+	if (dev_priv == NULL)
+		return DRM_ERR(ENOMEM);
+
+	memset(dev_priv, 0, sizeof(drm_i915_private_t));
+	dev->dev_private = (void *)dev_priv;
+//	dev_priv->flags = flags;
+
+	/* i915 has 4 more counters */
+	dev->counters += 4;
+	dev->types[6] = _DRM_STAT_IRQ;
+	dev->types[7] = _DRM_STAT_PRIMARY;
+	dev->types[8] = _DRM_STAT_SECONDARY;
+	dev->types[9] = _DRM_STAT_DMA;
+
+	if (IS_I9XX(dev)) {
+		dev_priv->mmiobase = drm_get_resource_start(dev, 0);
+		dev_priv->mmiolen = drm_get_resource_len(dev, 0);
+		dev->mode_config.fb_base = dev_priv->baseaddr =
+			drm_get_resource_start(dev, 2) & 0xff000000;
+	} else if (drm_get_resource_start(dev, 1)) {
+		dev_priv->mmiobase = drm_get_resource_start(dev, 1);
+		dev_priv->mmiolen = drm_get_resource_len(dev, 1);
+		dev->mode_config.fb_base = dev_priv->baseaddr =
+			drm_get_resource_start(dev, 0) & 0xff000000;
+	} else {
+		DRM_ERROR("Unable to find MMIO registers\n");
+		return -ENODEV;
+	}
+
+	ret = drm_addmap(dev, dev_priv->mmiobase, dev_priv->mmiolen,
+			 _DRM_REGISTERS, _DRM_READ_ONLY, &dev_priv->mmio_map);
+	if (ret != 0) {
+		DRM_ERROR("Cannot add mapping for MMIO registers\n");
+		return ret;
+	}
+
+	ret = drm_setup(dev);
+	if (ret) {
+		DRM_ERROR("drm_setup failed\n");
+		return ret;
+	}
+
+	DRM_GETSAREA();
+	if (!dev_priv->sarea) {
+		DRM_ERROR("can not find sarea!\n");
+		dev->dev_private = (void *)dev_priv;
+		i915_dma_cleanup(dev);
+		return DRM_ERR(EINVAL);
+	}
+
+	/* FIXME: assume sarea_priv is right after SAREA */
+        dev_priv->sarea_priv = dev_priv->sarea->handle + sizeof(drm_sarea_t);
+
+	/*
+	 * Initialize the memory manager for local and AGP space
+	 */
+	drm_bo_driver_init(dev);
+
+	i915_probe_agp(dev->pdev, &agp_size, &prealloc_size);
+	drm_bo_init_mm(dev, DRM_BO_MEM_PRIV0, dev_priv->baseaddr,
+		       prealloc_size);
+
+	/* Allocate scanout buffer and command ring */
+	/* FIXME: types and other args correct? */
+	hsize = 1280;
+	vsize = 800;
+	bytes_per_pixel = 4;
+	size = hsize * vsize * bytes_per_pixel;
+	drm_buffer_object_create(dev, size, drm_bo_type_kernel,
+				 DRM_BO_FLAG_READ | DRM_BO_FLAG_WRITE |
+				 DRM_BO_FLAG_MEM_PRIV0 | DRM_BO_FLAG_NO_MOVE,
+				 0, PAGE_SIZE, 0,
+				 &entry);
+
+	DRM_DEBUG("allocated bo, start: 0x%lx, offset: 0x%lx\n",
+		  entry->buffer_start, entry->offset);
+	intel_modeset_init(dev);
+
+	fb = drm_framebuffer_create(dev);
+	if (!fb) {
+		DRM_ERROR("failed to allocate fb\n");
+		return -EINVAL;
+	}
+
+	fb->width = hsize;
+	fb->height = vsize;
+	fb->pitch = hsize;
+	fb->bits_per_pixel = bytes_per_pixel * 8;
+	fb->depth = bytes_per_pixel * 8;
+	fb->offset = entry->offset;
+	fb->bo = entry;
+
+	drm_initial_config(dev, fb, false);
+	drmfb_probe(dev, fb);
+#if 0
+	/* FIXME: command ring needs AGP space, do we own it at this point? */
+	dev_priv->ring.Start = dev_priv->baseaddr;
+	dev_priv->ring.End = 128*1024;
+	dev_priv->ring.Size = 128*1024;
+	dev_priv->ring.tail_mask = dev_priv->ring.Size - 1;
+
+	dev_priv->ring.map.offset = dev_priv->ring.Start;
+	dev_priv->ring.map.size = dev_priv->ring.Size;
+	dev_priv->ring.map.type = 0;
+	dev_priv->ring.map.flags = 0;
+	dev_priv->ring.map.mtrr = 0;
+
+	drm_core_ioremap(&dev_priv->ring.map, dev);
+
+	if (dev_priv->ring.map.handle == NULL) {
+		dev->dev_private = (void *)dev_priv;
+		i915_dma_cleanup(dev);
+		DRM_ERROR("can not ioremap virtual address for"
+			  " ring buffer\n");
+		return DRM_ERR(ENOMEM);
+	}
+
+	dev_priv->ring.virtual_start = dev_priv->ring.map.handle;
+	dev_priv->cpp = 4;
+	dev_priv->sarea_priv->pf_current_page = 0;
+
+	/* We are using separate values as placeholders for mechanisms for
+	 * private backbuffer/depthbuffer usage.
+	 */
+	dev_priv->use_mi_batchbuffer_start = 0;
+
+	/* Allow hardware batchbuffers unless told otherwise.
+	 */
+	dev_priv->allow_batchbuffer = 1;
+
+	/* Program Hardware Status Page */
+	dev_priv->status_page_dmah = drm_pci_alloc(dev, PAGE_SIZE, PAGE_SIZE, 
+	    0xffffffff);
+
+	if (!dev_priv->status_page_dmah) {
+		dev->dev_private = (void *)dev_priv;
+		i915_dma_cleanup(dev);
+		DRM_ERROR("Can not allocate hardware status page\n");
+		return DRM_ERR(ENOMEM);
+	}
+	dev_priv->hw_status_page = dev_priv->status_page_dmah->vaddr;
+	dev_priv->dma_status_page = dev_priv->status_page_dmah->busaddr;
+	
+	memset(dev_priv->hw_status_page, 0, PAGE_SIZE);
+	DRM_DEBUG("hw status page @ %p\n", dev_priv->hw_status_page);
+
+	I915_WRITE(0x02080, dev_priv->dma_status_page);
+	DRM_DEBUG("Enabled hardware status page\n");
+#endif
+
+	return 0;
+}
+
+int i915_driver_unload(drm_device_t *dev)
+{
+	drm_i915_private_t *dev_priv = dev->dev_private;
+	struct drm_framebuffer *fb;
+
+	/* FIXME: remove framebuffer */
+	intel_modeset_cleanup(dev);
+	drm_free(dev_priv, sizeof(*dev_priv), DRM_MEM_DRIVER);
+
+	dev->dev_private = NULL;
+	return 0;
+}
+
+void i915_driver_lastclose(drm_device_t * dev)
+{
+	drm_i915_private_t *dev_priv = dev->dev_private;
+	
+	i915_mem_takedown(&(dev_priv->agp_heap));
+
+	i915_dma_cleanup(dev);
+
+	dev_priv->mmio_map = NULL;
+}
+
+void i915_driver_preclose(drm_device_t * dev, DRMFILE filp)
+{
+	drm_i915_private_t *dev_priv = dev->dev_private;
+	i915_mem_release(dev, filp, dev_priv->agp_heap);
+}
+