Initial import of modesetting for intel driver in DRM

1 files changed, 428 insertions, 0 deletions

diff --git a/linux-core/drm_crtc.h b/linux-core/drm_crtc.h
new file mode 100644
index 00000000..1be115d1
--- /dev/null
+++ b/linux-core/drm_crtc.h
@@ -0,0 +1,428 @@
+/*
+ * Copyright © 2006 Keith Packard
+ * Copyright © 2007 Intel Corporation
+ *   Jesse Barnes <jesse.barnes@intel.com>
+ */
+#ifndef __DRM_CRTC_H__
+#define __DRM_CRTC_H__
+
+#include <linux/i2c.h>
+#include <linux/spinlock.h>
+#include <linux/types.h>
+#include "drmP.h"
+#include "drm.h"
+
+struct drm_device;
+
+/*
+ * Note on terminology:  here, for brevity and convenience, we refer to output
+ * control chips as 'CRTCs'.  They can control any type of output, VGA, LVDS,
+ * DVI, etc.  And 'screen' refers to the whole of the visible display, which
+ * may span multiple monitors (and therefore multiple CRTC and output
+ * structures).
+ */
+
+enum drm_mode_status {
+    MODE_OK	= 0,	/* Mode OK */
+    MODE_HSYNC,		/* hsync out of range */
+    MODE_VSYNC,		/* vsync out of range */
+    MODE_H_ILLEGAL,	/* mode has illegal horizontal timings */
+    MODE_V_ILLEGAL,	/* mode has illegal horizontal timings */
+    MODE_BAD_WIDTH,	/* requires an unsupported linepitch */
+    MODE_NOMODE,	/* no mode with a maching name */
+    MODE_NO_INTERLACE,	/* interlaced mode not supported */
+    MODE_NO_DBLESCAN,	/* doublescan mode not supported */
+    MODE_NO_VSCAN,	/* multiscan mode not supported */
+    MODE_MEM,		/* insufficient video memory */
+    MODE_VIRTUAL_X,	/* mode width too large for specified virtual size */
+    MODE_VIRTUAL_Y,	/* mode height too large for specified virtual size */
+    MODE_MEM_VIRT,	/* insufficient video memory given virtual size */
+    MODE_NOCLOCK,	/* no fixed clock available */
+    MODE_CLOCK_HIGH,	/* clock required is too high */
+    MODE_CLOCK_LOW,	/* clock required is too low */
+    MODE_CLOCK_RANGE,	/* clock/mode isn't in a ClockRange */
+    MODE_BAD_HVALUE,	/* horizontal timing was out of range */
+    MODE_BAD_VVALUE,	/* vertical timing was out of range */
+    MODE_BAD_VSCAN,	/* VScan value out of range */
+    MODE_HSYNC_NARROW,	/* horizontal sync too narrow */
+    MODE_HSYNC_WIDE,	/* horizontal sync too wide */
+    MODE_HBLANK_NARROW,	/* horizontal blanking too narrow */
+    MODE_HBLANK_WIDE,	/* horizontal blanking too wide */
+    MODE_VSYNC_NARROW,	/* vertical sync too narrow */
+    MODE_VSYNC_WIDE,	/* vertical sync too wide */
+    MODE_VBLANK_NARROW,	/* vertical blanking too narrow */
+    MODE_VBLANK_WIDE,	/* vertical blanking too wide */
+    MODE_PANEL,         /* exceeds panel dimensions */
+    MODE_INTERLACE_WIDTH, /* width too large for interlaced mode */
+    MODE_ONE_WIDTH,     /* only one width is supported */
+    MODE_ONE_HEIGHT,    /* only one height is supported */
+    MODE_ONE_SIZE,      /* only one resolution is supported */
+    MODE_NO_REDUCED,    /* monitor doesn't accept reduced blanking */
+    MODE_BAD = -2,	/* unspecified reason */
+    MODE_ERROR	= -1	/* error condition */
+};
+
+#define DRM_MODE_TYPE_BUILTIN	(1<<0)
+#define DRM_MODE_TYPE_CLOCK_C	((1<<1) | DRM_MODE_TYPE_BUILTIN)
+#define DRM_MODE_TYPE_CRTC_C	((1<<2) | DRM_MODE_TYPE_BUILTIN)
+#define DRM_MODE_TYPE_PREFERRED	(1<<3)
+#define DRM_MODE_TYPE_DEFAULT	(1<<4)
+#define DRM_MODE_TYPE_USERDEF	(1<<5)
+#define DRM_MODE_TYPE_DRIVER	(1<<6)
+
+#define DRM_MODE_TYPE_CLOCK_CRTC_C (DRM_MODE_TYPE_CLOCK_C | \
+				    DRM_MODE_TYPE_CRTC_C)
+
+#define DRM_DISPLAY_MODE_LEN 32
+
+#define DRM_MODE(nm, t, c, hd, hss, hse, ht, hsk, vd, vss, vse, vt, vs, f) \
+	.name = nm, .status = 0, .type = (t), .clock = (c), \
+	.hdisplay = (hd), .hsync_start = (hss), .hsync_end = (hse), \
+	.htotal = (ht), .hskew = (hsk), .vdisplay = (vd), \
+	.vsync_start = (vss), .vsync_end = (vse), .vtotal = (vt), \
+	.vscan = (vs), .flags = (f)
+
+struct drm_display_mode {
+	/* Header */
+	struct list_head head;
+	char name[DRM_DISPLAY_MODE_LEN];
+	enum drm_mode_status status;
+	int type;
+
+	/* Proposed mode values */
+	int clock;
+	int hdisplay;
+	int hsync_start;
+	int hsync_end;
+	int htotal;
+	int hskew;
+	int vdisplay;
+	int vsync_start;
+	int vsync_end;
+	int vtotal;
+	int vscan;
+	unsigned int flags;
+
+	/* Actual mode we give to hw */
+	int clock_index;
+	int synth_clock;
+	int crtc_hdisplay;
+	int crtc_hblank_start;
+	int crtc_hblank_end;
+	int crtc_hsync_start;
+	int crtc_hsync_end;
+	int crtc_htotal;
+	int crtc_hskew;
+	int crtc_vdisplay;
+	int crtc_vblank_start;
+	int crtc_vblank_end;
+	int crtc_vsync_start;
+	int crtc_vsync_end;
+	int crtc_vtotal;
+	int crtc_hadjusted;
+	int crtc_vadjusted;
+
+	/* Driver private mode info */
+	int private_size;
+	int *private;
+	int private_flags;
+
+	int vrefresh;
+	float hsync;//, vrefresh;
+};
+
+/* Video mode flags */
+#define V_PHSYNC	(1<<0)
+#define V_NHSYNC	(1<<1)
+#define V_PVSYNC	(1<<2)
+#define V_NVSYNC	(1<<3)
+#define V_INTERLACE	(1<<4)
+#define V_DBLSCAN	(1<<5)
+#define V_CSYNC		(1<<6)
+#define V_PCSYNC	(1<<7)
+#define V_NCSYNC	(1<<8)
+#define V_HSKEW		(1<<9) /* hskew provided */
+#define V_BCAST		(1<<10)
+#define V_PIXMUX	(1<<11)
+#define V_DBLCLK	(1<<12)
+#define V_CLKDIV2	(1<<13)
+
+#define CRTC_INTERLACE_HALVE_V 0x1 /* halve V values for interlacing */
+#define DPMSModeOn 0
+#define DPMSModeStandby 1
+#define DPMSModeSuspend 2
+#define DPMSModeOff 3
+
+enum drm_output_status {
+	output_status_connected,
+	output_status_disconnected,
+	output_status_unknown,
+};
+
+enum subpixel_order {
+	SubPixelUnknown = 0,
+	SubPixelHorizontalRGB,
+	SubPixelHorizontalBGR,
+	SubPixelVerticalRGB,
+	SubPixelVerticalBGR,
+	SubPixelNone,
+};
+
+struct drm_framebuffer {
+	struct drm_device *dev;
+	struct list_head head;
+	unsigned int pitch;
+	unsigned long offset;
+	unsigned int width;
+	unsigned int height;
+	/* depth can be 15 or 16 */
+	unsigned int depth;
+	int bits_per_pixel;
+	int flags;
+};
+struct drm_crtc;
+struct drm_output;
+
+/**
+ * drm_crtc_funcs - control CRTCs for a given device
+ * @dpms: control display power levels
+ * @save: save CRTC state
+ * @resore: restore CRTC state
+ * @lock: lock the CRTC
+ * @unlock: unlock the CRTC
+ * @shadow_allocate: allocate shadow pixmap
+ * @shadow_create: create shadow pixmap for rotation support
+ * @shadow_destroy: free shadow pixmap
+ * @mode_fixup: fixup proposed mode
+ * @mode_set: set the desired mode on the CRTC
+ * @gamma_set: specify color ramp for CRTC
+ * @cleanup: cleanup driver private state prior to close
+ *
+ * The drm_crtc_funcs structure is the central CRTC management structure
+ * in the DRM.  Each CRTC controls one or more outputs (note that the name
+ * CRTC is simply historical, a CRTC may control LVDS, VGA, DVI, TV out, etc.
+ * outputs, not just CRTs).
+ *
+ * Each driver is responsible for filling out this structure at startup time,
+ * in addition to providing other modesetting features, like i2c and DDC
+ * bus accessors.
+ */
+struct drm_crtc_funcs {
+	/*
+	 * Control power levels on the CRTC.  If the mode passed in is
+	 * unsupported, the provider must use the next lowest power level.
+	 */
+	void (*dpms)(struct drm_crtc *crtc, int mode);
+
+	/* JJJ:  Are these needed? */
+	/* Save CRTC state */
+	void (*save)(struct drm_crtc *crtc); /* suspend? */
+	/* Restore CRTC state */
+	void (*restore)(struct drm_crtc *crtc); /* resume? */
+	bool (*lock)(struct drm_crtc *crtc);
+	void (*unlock)(struct drm_crtc *crtc);
+
+	void (*prepare)(struct drm_crtc *crtc);
+	void (*commit)(struct drm_crtc *crtc);
+
+	/* Provider can fixup or change mode timings before modeset occurs */
+	bool (*mode_fixup)(struct drm_crtc *crtc,
+			   struct drm_display_mode *mode,
+			   struct drm_display_mode *adjusted_mode);
+	/* Actually set the mode */
+	void (*mode_set)(struct drm_crtc *crtc, struct drm_display_mode *mode,
+			 struct drm_display_mode *adjusted_mode, int x, int y);
+	/* Set gamma on the CRTC */
+	void (*gamma_set)(struct drm_crtc *crtc, u16 *r, u16 *g, u16 *b,
+			  int size);
+	/* Driver cleanup routine */
+	void (*cleanup)(struct drm_crtc *crtc);
+};
+
+/**
+ * drm_crtc - central CRTC control structure
+ * @enabled: is this CRTC enabled?
+ * @x: x position on screen
+ * @y: y position on screen
+ * @desired_mode: new desired mode
+ * @desired_x: desired x for desired_mode
+ * @desired_y: desired y for desired_mode
+ * @funcs: CRTC control functions
+ * @driver_private: arbitrary driver data
+ *
+ * Each CRTC may have one or more outputs associated with it.  This structure
+ * allows the CRTC to be controlled.
+ */
+struct drm_crtc {
+	struct drm_device *dev;
+	struct list_head head;
+
+	/* framebuffer the CRTC is currently bound to */
+	struct drm_framebuffer *fb;
+
+	bool enabled;
+
+	/* JJJ: are these needed? */
+	bool cursor_in_range;
+	bool cursor_shown;
+
+	struct drm_display_mode mode;
+
+	int x, y;
+	struct drm_display_mode desired_mode;
+	int desired_x, desired_y;
+	const struct drm_crtc_funcs *funcs;
+	void *driver_private;
+
+	/* RRCrtcPtr randr_crtc? */
+};
+
+extern struct drm_crtc *drm_crtc_create(struct drm_device *dev,
+					const struct drm_crtc_funcs *funcs);
+
+/**
+ * drm_output_funcs - control outputs on a given device
+ * @init: setup this output
+ * @dpms: set power state (see drm_crtc_funcs above)
+ * @save: save output state
+ * @restore: restore output state
+ * @mode_valid: is this mode valid on the given output?
+ * @mode_fixup: try to fixup proposed mode for this output
+ * @mode_set: set this mode
+ * @detect: is this output active?
+ * @get_modes: get mode list for this output
+ * @set_property: property for this output may need update
+ * @cleanup: output is going away, cleanup
+ *
+ * Each CRTC may have one or more outputs attached to it.  The functions
+ * below allow the core DRM code to control outputs, enumerate available modes,
+ * etc.
+ */
+struct drm_output_funcs {
+	void (*init)(struct drm_output *output);
+	void (*dpms)(struct drm_output *output, int mode);
+	void (*save)(struct drm_output *output);
+	void (*restore)(struct drm_output *output);
+	int (*mode_valid)(struct drm_output *output,
+			  struct drm_display_mode *mode);
+	bool (*mode_fixup)(struct drm_output *output,
+			   struct drm_display_mode *mode,
+			   struct drm_display_mode *adjusted_mode);
+	void (*prepare)(struct drm_output *output);
+	void (*commit)(struct drm_output *output);
+	void (*mode_set)(struct drm_output *output,
+			 struct drm_display_mode *mode,
+			 struct drm_display_mode *adjusted_mode);
+	enum drm_output_status (*detect)(struct drm_output *output);
+	int (*get_modes)(struct drm_output *output);
+	/* JJJ: type checking for properties via property value type */
+	bool (*set_property)(struct drm_output *output, int prop, void *val);
+	void (*cleanup)(struct drm_output *output);
+};
+
+#define DRM_OUTPUT_LEN 32
+/**
+ * drm_output - central DRM output control structure
+ * @crtc: CRTC this output is currently connected to, NULL if none
+ * @possible_crtcs: bitmap of CRTCS this output could be attached to
+ * @possible_clones: bitmap of possible outputs this output could clone
+ * @interlace_allowed: can this output handle interlaced modes?
+ * @doublescan_allowed: can this output handle doublescan?
+ * @available_modes: modes available on this output (from get_modes() + user)
+ * @initial_x: initial x position for this output
+ * @initial_y: initial y position for this output
+ * @status: output connected?
+ * @subpixel_order: for this output
+ * @mm_width: displayable width of output in mm
+ * @mm_height: displayable height of output in mm
+ * @name: name of output (should be one of a few standard names)
+ * @funcs: output control functions
+ * @driver_private: private driver data
+ *
+ * Each output may be connected to one or more CRTCs, or may be clonable by
+ * another output if they can share a CRTC.  Each output also has a specific
+ * position in the broader display (referred to as a 'screen' though it could
+ * span multiple monitors).
+ */
+struct drm_output {
+	struct drm_device *dev;
+	struct list_head head;
+	struct drm_crtc *crtc;
+	unsigned long possible_crtcs;
+	unsigned long possible_clones;
+	bool interlace_allowed;
+	bool doublescan_allowed;
+	spinlock_t modes_lock;
+	struct list_head modes; /* list of modes on this output */
+	/*
+	  OptionInfoPtr options;
+	  XF86ConfMonitorPtr conf_monitor;
+	 */
+	int initial_x, initial_y;
+	enum drm_output_status status;
+
+	/* these are modes added by probing with DDC or the BIOS */
+	struct list_head probed_modes;
+	
+	/* xf86MonPtr MonInfo; */
+	enum subpixel_order subpixel_order;
+	int mm_width, mm_height;
+	char name[DRM_OUTPUT_LEN];
+	const struct drm_output_funcs *funcs;
+	void *driver_private;
+	/* RROutputPtr randr_output? */
+};
+
+/**
+ * struct drm_crtc_config_funcs - configure CRTCs for a given screen layout
+ * @resize: adjust CRTCs as necessary for the proposed layout
+ *
+ * Currently only a resize hook is available.  DRM will call back into the
+ * driver with a new screen width and height.  If the driver can't support
+ * the proposed size, it can return false.  Otherwise it should adjust
+ * the CRTC<->output mappings as needed and update its view of the screen.
+ */
+struct drm_crtc_config_funcs {
+	bool (*resize)(struct drm_device *dev, int width, int height);
+};
+
+/**
+ * drm_crtc_config - CRTC configuration control structure
+ *
+ */
+struct drm_crtc_config {
+	spinlock_t config_lock;
+	/* this is limited to one for now */
+	int num_fb;
+	struct list_head fb_list;
+	int num_output;
+	struct list_head output_list;
+
+	/* int compat_output? */
+	int num_crtc;
+	struct list_head crtc_list;
+
+	int min_width, min_height;
+	int max_width, max_height;
+	/* DamagePtr rotationDamage? */
+	/* DGA stuff? */
+	struct drm_crtc_config_funcs *funcs;
+};
+
+struct drm_output *drm_output_create(struct drm_device *dev,
+				     const struct drm_output_funcs *funcs,
+				     const char *name);
+void drm_output_destroy(struct drm_output *output);
+bool drm_output_rename(struct drm_output *output, const char *name);
+
+int drm_add_edid_modes(struct drm_output *output,
+			struct i2c_adapter *adapter);
+void drm_mode_probed_add(struct drm_output *output, struct drm_display_mode *mode);
+void drm_mode_remove(struct drm_output *output, struct drm_display_mode *mode);
+extern struct drm_display_mode *drm_mode_duplicate(struct drm_display_mode *mode);
+extern void drm_mode_debug_printmodeline(struct drm_device *dev,
+					 struct drm_display_mode *mode);
+extern void drm_crtc_config_init(struct drm_device *dev);
+extern void drm_crtc_config_cleanup(struct drm_device *dev);
+extern void drm_disable_unused_functions(struct drm_device *dev);
+#endif /* __DRM_CRTC_H__ */