From 52f9028c84baea81230dc673b756552e8e90aecd Mon Sep 17 00:00:00 2001 From: Dave Airlie Date: Thu, 5 Apr 2007 11:21:06 +1000 Subject: Initial import of modesetting for intel driver in DRM --- linux-core/drm_crtc.h | 428 ++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 428 insertions(+) create mode 100644 linux-core/drm_crtc.h (limited to 'linux-core/drm_crtc.h') diff --git a/linux-core/drm_crtc.h b/linux-core/drm_crtc.h new file mode 100644 index 00000000..1be115d1 --- /dev/null +++ b/linux-core/drm_crtc.h @@ -0,0 +1,428 @@ +/* + * Copyright © 2006 Keith Packard + * Copyright © 2007 Intel Corporation + * Jesse Barnes + */ +#ifndef __DRM_CRTC_H__ +#define __DRM_CRTC_H__ + +#include +#include +#include +#include "drmP.h" +#include "drm.h" + +struct drm_device; + +/* + * Note on terminology: here, for brevity and convenience, we refer to output + * control chips as 'CRTCs'. They can control any type of output, VGA, LVDS, + * DVI, etc. And 'screen' refers to the whole of the visible display, which + * may span multiple monitors (and therefore multiple CRTC and output + * structures). + */ + +enum drm_mode_status { + MODE_OK = 0, /* Mode OK */ + MODE_HSYNC, /* hsync out of range */ + MODE_VSYNC, /* vsync out of range */ + MODE_H_ILLEGAL, /* mode has illegal horizontal timings */ + MODE_V_ILLEGAL, /* mode has illegal horizontal timings */ + MODE_BAD_WIDTH, /* requires an unsupported linepitch */ + MODE_NOMODE, /* no mode with a maching name */ + MODE_NO_INTERLACE, /* interlaced mode not supported */ + MODE_NO_DBLESCAN, /* doublescan mode not supported */ + MODE_NO_VSCAN, /* multiscan mode not supported */ + MODE_MEM, /* insufficient video memory */ + MODE_VIRTUAL_X, /* mode width too large for specified virtual size */ + MODE_VIRTUAL_Y, /* mode height too large for specified virtual size */ + MODE_MEM_VIRT, /* insufficient video memory given virtual size */ + MODE_NOCLOCK, /* no fixed clock available */ + MODE_CLOCK_HIGH, /* clock required is too high */ + MODE_CLOCK_LOW, /* clock required is too low */ + MODE_CLOCK_RANGE, /* clock/mode isn't in a ClockRange */ + MODE_BAD_HVALUE, /* horizontal timing was out of range */ + MODE_BAD_VVALUE, /* vertical timing was out of range */ + MODE_BAD_VSCAN, /* VScan value out of range */ + MODE_HSYNC_NARROW, /* horizontal sync too narrow */ + MODE_HSYNC_WIDE, /* horizontal sync too wide */ + MODE_HBLANK_NARROW, /* horizontal blanking too narrow */ + MODE_HBLANK_WIDE, /* horizontal blanking too wide */ + MODE_VSYNC_NARROW, /* vertical sync too narrow */ + MODE_VSYNC_WIDE, /* vertical sync too wide */ + MODE_VBLANK_NARROW, /* vertical blanking too narrow */ + MODE_VBLANK_WIDE, /* vertical blanking too wide */ + MODE_PANEL, /* exceeds panel dimensions */ + MODE_INTERLACE_WIDTH, /* width too large for interlaced mode */ + MODE_ONE_WIDTH, /* only one width is supported */ + MODE_ONE_HEIGHT, /* only one height is supported */ + MODE_ONE_SIZE, /* only one resolution is supported */ + MODE_NO_REDUCED, /* monitor doesn't accept reduced blanking */ + MODE_BAD = -2, /* unspecified reason */ + MODE_ERROR = -1 /* error condition */ +}; + +#define DRM_MODE_TYPE_BUILTIN (1<<0) +#define DRM_MODE_TYPE_CLOCK_C ((1<<1) | DRM_MODE_TYPE_BUILTIN) +#define DRM_MODE_TYPE_CRTC_C ((1<<2) | DRM_MODE_TYPE_BUILTIN) +#define DRM_MODE_TYPE_PREFERRED (1<<3) +#define DRM_MODE_TYPE_DEFAULT (1<<4) +#define DRM_MODE_TYPE_USERDEF (1<<5) +#define DRM_MODE_TYPE_DRIVER (1<<6) + +#define DRM_MODE_TYPE_CLOCK_CRTC_C (DRM_MODE_TYPE_CLOCK_C | \ + DRM_MODE_TYPE_CRTC_C) + +#define DRM_DISPLAY_MODE_LEN 32 + +#define DRM_MODE(nm, t, c, hd, hss, hse, ht, hsk, vd, vss, vse, vt, vs, f) \ + .name = nm, .status = 0, .type = (t), .clock = (c), \ + .hdisplay = (hd), .hsync_start = (hss), .hsync_end = (hse), \ + .htotal = (ht), .hskew = (hsk), .vdisplay = (vd), \ + .vsync_start = (vss), .vsync_end = (vse), .vtotal = (vt), \ + .vscan = (vs), .flags = (f) + +struct drm_display_mode { + /* Header */ + struct list_head head; + char name[DRM_DISPLAY_MODE_LEN]; + enum drm_mode_status status; + int type; + + /* Proposed mode values */ + int clock; + int hdisplay; + int hsync_start; + int hsync_end; + int htotal; + int hskew; + int vdisplay; + int vsync_start; + int vsync_end; + int vtotal; + int vscan; + unsigned int flags; + + /* Actual mode we give to hw */ + int clock_index; + int synth_clock; + int crtc_hdisplay; + int crtc_hblank_start; + int crtc_hblank_end; + int crtc_hsync_start; + int crtc_hsync_end; + int crtc_htotal; + int crtc_hskew; + int crtc_vdisplay; + int crtc_vblank_start; + int crtc_vblank_end; + int crtc_vsync_start; + int crtc_vsync_end; + int crtc_vtotal; + int crtc_hadjusted; + int crtc_vadjusted; + + /* Driver private mode info */ + int private_size; + int *private; + int private_flags; + + int vrefresh; + float hsync;//, vrefresh; +}; + +/* Video mode flags */ +#define V_PHSYNC (1<<0) +#define V_NHSYNC (1<<1) +#define V_PVSYNC (1<<2) +#define V_NVSYNC (1<<3) +#define V_INTERLACE (1<<4) +#define V_DBLSCAN (1<<5) +#define V_CSYNC (1<<6) +#define V_PCSYNC (1<<7) +#define V_NCSYNC (1<<8) +#define V_HSKEW (1<<9) /* hskew provided */ +#define V_BCAST (1<<10) +#define V_PIXMUX (1<<11) +#define V_DBLCLK (1<<12) +#define V_CLKDIV2 (1<<13) + +#define CRTC_INTERLACE_HALVE_V 0x1 /* halve V values for interlacing */ +#define DPMSModeOn 0 +#define DPMSModeStandby 1 +#define DPMSModeSuspend 2 +#define DPMSModeOff 3 + +enum drm_output_status { + output_status_connected, + output_status_disconnected, + output_status_unknown, +}; + +enum subpixel_order { + SubPixelUnknown = 0, + SubPixelHorizontalRGB, + SubPixelHorizontalBGR, + SubPixelVerticalRGB, + SubPixelVerticalBGR, + SubPixelNone, +}; + +struct drm_framebuffer { + struct drm_device *dev; + struct list_head head; + unsigned int pitch; + unsigned long offset; + unsigned int width; + unsigned int height; + /* depth can be 15 or 16 */ + unsigned int depth; + int bits_per_pixel; + int flags; +}; +struct drm_crtc; +struct drm_output; + +/** + * drm_crtc_funcs - control CRTCs for a given device + * @dpms: control display power levels + * @save: save CRTC state + * @resore: restore CRTC state + * @lock: lock the CRTC + * @unlock: unlock the CRTC + * @shadow_allocate: allocate shadow pixmap + * @shadow_create: create shadow pixmap for rotation support + * @shadow_destroy: free shadow pixmap + * @mode_fixup: fixup proposed mode + * @mode_set: set the desired mode on the CRTC + * @gamma_set: specify color ramp for CRTC + * @cleanup: cleanup driver private state prior to close + * + * The drm_crtc_funcs structure is the central CRTC management structure + * in the DRM. Each CRTC controls one or more outputs (note that the name + * CRTC is simply historical, a CRTC may control LVDS, VGA, DVI, TV out, etc. + * outputs, not just CRTs). + * + * Each driver is responsible for filling out this structure at startup time, + * in addition to providing other modesetting features, like i2c and DDC + * bus accessors. + */ +struct drm_crtc_funcs { + /* + * Control power levels on the CRTC. If the mode passed in is + * unsupported, the provider must use the next lowest power level. + */ + void (*dpms)(struct drm_crtc *crtc, int mode); + + /* JJJ: Are these needed? */ + /* Save CRTC state */ + void (*save)(struct drm_crtc *crtc); /* suspend? */ + /* Restore CRTC state */ + void (*restore)(struct drm_crtc *crtc); /* resume? */ + bool (*lock)(struct drm_crtc *crtc); + void (*unlock)(struct drm_crtc *crtc); + + void (*prepare)(struct drm_crtc *crtc); + void (*commit)(struct drm_crtc *crtc); + + /* Provider can fixup or change mode timings before modeset occurs */ + bool (*mode_fixup)(struct drm_crtc *crtc, + struct drm_display_mode *mode, + struct drm_display_mode *adjusted_mode); + /* Actually set the mode */ + void (*mode_set)(struct drm_crtc *crtc, struct drm_display_mode *mode, + struct drm_display_mode *adjusted_mode, int x, int y); + /* Set gamma on the CRTC */ + void (*gamma_set)(struct drm_crtc *crtc, u16 *r, u16 *g, u16 *b, + int size); + /* Driver cleanup routine */ + void (*cleanup)(struct drm_crtc *crtc); +}; + +/** + * drm_crtc - central CRTC control structure + * @enabled: is this CRTC enabled? + * @x: x position on screen + * @y: y position on screen + * @desired_mode: new desired mode + * @desired_x: desired x for desired_mode + * @desired_y: desired y for desired_mode + * @funcs: CRTC control functions + * @driver_private: arbitrary driver data + * + * Each CRTC may have one or more outputs associated with it. This structure + * allows the CRTC to be controlled. + */ +struct drm_crtc { + struct drm_device *dev; + struct list_head head; + + /* framebuffer the CRTC is currently bound to */ + struct drm_framebuffer *fb; + + bool enabled; + + /* JJJ: are these needed? */ + bool cursor_in_range; + bool cursor_shown; + + struct drm_display_mode mode; + + int x, y; + struct drm_display_mode desired_mode; + int desired_x, desired_y; + const struct drm_crtc_funcs *funcs; + void *driver_private; + + /* RRCrtcPtr randr_crtc? */ +}; + +extern struct drm_crtc *drm_crtc_create(struct drm_device *dev, + const struct drm_crtc_funcs *funcs); + +/** + * drm_output_funcs - control outputs on a given device + * @init: setup this output + * @dpms: set power state (see drm_crtc_funcs above) + * @save: save output state + * @restore: restore output state + * @mode_valid: is this mode valid on the given output? + * @mode_fixup: try to fixup proposed mode for this output + * @mode_set: set this mode + * @detect: is this output active? + * @get_modes: get mode list for this output + * @set_property: property for this output may need update + * @cleanup: output is going away, cleanup + * + * Each CRTC may have one or more outputs attached to it. The functions + * below allow the core DRM code to control outputs, enumerate available modes, + * etc. + */ +struct drm_output_funcs { + void (*init)(struct drm_output *output); + void (*dpms)(struct drm_output *output, int mode); + void (*save)(struct drm_output *output); + void (*restore)(struct drm_output *output); + int (*mode_valid)(struct drm_output *output, + struct drm_display_mode *mode); + bool (*mode_fixup)(struct drm_output *output, + struct drm_display_mode *mode, + struct drm_display_mode *adjusted_mode); + void (*prepare)(struct drm_output *output); + void (*commit)(struct drm_output *output); + void (*mode_set)(struct drm_output *output, + struct drm_display_mode *mode, + struct drm_display_mode *adjusted_mode); + enum drm_output_status (*detect)(struct drm_output *output); + int (*get_modes)(struct drm_output *output); + /* JJJ: type checking for properties via property value type */ + bool (*set_property)(struct drm_output *output, int prop, void *val); + void (*cleanup)(struct drm_output *output); +}; + +#define DRM_OUTPUT_LEN 32 +/** + * drm_output - central DRM output control structure + * @crtc: CRTC this output is currently connected to, NULL if none + * @possible_crtcs: bitmap of CRTCS this output could be attached to + * @possible_clones: bitmap of possible outputs this output could clone + * @interlace_allowed: can this output handle interlaced modes? + * @doublescan_allowed: can this output handle doublescan? + * @available_modes: modes available on this output (from get_modes() + user) + * @initial_x: initial x position for this output + * @initial_y: initial y position for this output + * @status: output connected? + * @subpixel_order: for this output + * @mm_width: displayable width of output in mm + * @mm_height: displayable height of output in mm + * @name: name of output (should be one of a few standard names) + * @funcs: output control functions + * @driver_private: private driver data + * + * Each output may be connected to one or more CRTCs, or may be clonable by + * another output if they can share a CRTC. Each output also has a specific + * position in the broader display (referred to as a 'screen' though it could + * span multiple monitors). + */ +struct drm_output { + struct drm_device *dev; + struct list_head head; + struct drm_crtc *crtc; + unsigned long possible_crtcs; + unsigned long possible_clones; + bool interlace_allowed; + bool doublescan_allowed; + spinlock_t modes_lock; + struct list_head modes; /* list of modes on this output */ + /* + OptionInfoPtr options; + XF86ConfMonitorPtr conf_monitor; + */ + int initial_x, initial_y; + enum drm_output_status status; + + /* these are modes added by probing with DDC or the BIOS */ + struct list_head probed_modes; + + /* xf86MonPtr MonInfo; */ + enum subpixel_order subpixel_order; + int mm_width, mm_height; + char name[DRM_OUTPUT_LEN]; + const struct drm_output_funcs *funcs; + void *driver_private; + /* RROutputPtr randr_output? */ +}; + +/** + * struct drm_crtc_config_funcs - configure CRTCs for a given screen layout + * @resize: adjust CRTCs as necessary for the proposed layout + * + * Currently only a resize hook is available. DRM will call back into the + * driver with a new screen width and height. If the driver can't support + * the proposed size, it can return false. Otherwise it should adjust + * the CRTC<->output mappings as needed and update its view of the screen. + */ +struct drm_crtc_config_funcs { + bool (*resize)(struct drm_device *dev, int width, int height); +}; + +/** + * drm_crtc_config - CRTC configuration control structure + * + */ +struct drm_crtc_config { + spinlock_t config_lock; + /* this is limited to one for now */ + int num_fb; + struct list_head fb_list; + int num_output; + struct list_head output_list; + + /* int compat_output? */ + int num_crtc; + struct list_head crtc_list; + + int min_width, min_height; + int max_width, max_height; + /* DamagePtr rotationDamage? */ + /* DGA stuff? */ + struct drm_crtc_config_funcs *funcs; +}; + +struct drm_output *drm_output_create(struct drm_device *dev, + const struct drm_output_funcs *funcs, + const char *name); +void drm_output_destroy(struct drm_output *output); +bool drm_output_rename(struct drm_output *output, const char *name); + +int drm_add_edid_modes(struct drm_output *output, + struct i2c_adapter *adapter); +void drm_mode_probed_add(struct drm_output *output, struct drm_display_mode *mode); +void drm_mode_remove(struct drm_output *output, struct drm_display_mode *mode); +extern struct drm_display_mode *drm_mode_duplicate(struct drm_display_mode *mode); +extern void drm_mode_debug_printmodeline(struct drm_device *dev, + struct drm_display_mode *mode); +extern void drm_crtc_config_init(struct drm_device *dev); +extern void drm_crtc_config_cleanup(struct drm_device *dev); +extern void drm_disable_unused_functions(struct drm_device *dev); +#endif /* __DRM_CRTC_H__ */ -- cgit v1.2.3