summaryrefslogtreecommitdiff
path: root/content.tex
diff options
context:
space:
mode:
authormstsirkin <mstsirkin@0c8fb4dd-22a2-4bb5-bc14-6c75a5f43652>2015-10-21 14:20:04 +0000
committermstsirkin <mstsirkin@0c8fb4dd-22a2-4bb5-bc14-6c75a5f43652>2015-10-21 14:20:04 +0000
commitff6b2bb653ae98cd0e71523d9c82f908bc95f035 (patch)
treea95662c5b32c051f83dd1c861b1fcc79e432b219 /content.tex
parentcff819e3c64b19873746fdeb4307d3e6f0a66ff2 (diff)
virtio-blk: restore VIRTIO_BLK_F_FLUSH and VIRTIO_BLK_F_CONFIG_WCE
VIRTIO_BLK_F_CONFIG_WCE is important in order to achieve good performance (up to 2x, though more realistically +30-40%) in latency-bound workloads. However, it was removed by mistake together with VIRTIO_BLK_F_FLUSH. In addition, even removing VIRTIO_BLK_F_FLUSH was probably not a great idea, because it simplifies simple drivers (e.g. firmware) that are okay with a writethrough cache but still need data to persist after power loss. What really should have been removed is just the possibility that devices not propose VIRTIO_BLK_F_FLUSH, but even that only deserves a "SHOULD" in the new world of conformance statements. Restore these, with the following changes: * clarify and use conformance statements in order to define writeback and writethrough caching according to what is commonly done by high-end storage. * clarify (with conformance statements) the influence of the VIRTIO_BLK_F_FLUSH feature on caching and how to proceed if only one of VIRTIO_BLK_F_FLUSH and VIRTIO_BLK_F_CONFIG_WCE is negotiated. * strengthen the requirement for persisting writes to MUST after a VIRTIO_BLK_T_FLUSH request (and in other cases too involving the new features). The suggested behavior upon feature negotiation is okay for the Linux implementation of virtio1, even after the implementation is modified to support the two new features. This fixes VIRTIO-144. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Accepted by electronic ballot: https://www.oasis-open.org/apps/org/workgroup/virtio/ballot.php?id=2864 Signed-off-by: Michael S. Tsirkin <mst@redhat.com> git-svn-id: https://tools.oasis-open.org/version-control/svn/virtio/branches/v1.0@546 0c8fb4dd-22a2-4bb5-bc14-6c75a5f43652
Diffstat (limited to 'content.tex')
-rw-r--r--content.tex145
1 files changed, 123 insertions, 22 deletions
diff --git a/content.tex b/content.tex
index 4be0f7d..e054919 100644
--- a/content.tex
+++ b/content.tex
@@ -4041,8 +4041,13 @@ device except where noted.
\item[VIRTIO_BLK_F_BLK_SIZE (6)] Block size of disk is in \field{blk_size}.
+\item[VIRTIO_BLK_F_FLUSH (9)] Cache flush command support.
+
\item[VIRTIO_BLK_F_TOPOLOGY (10)] Device exports information on optimal I/O
alignment.
+
+\item[VIRTIO_BLK_F_CONFIG_WCE (11)] Device can toggle its cache between writeback
+ and writethrough modes.
\end{description}
\subsubsection{Legacy Interface: Feature bits}\label{sec:Device Types / Block Device / Feature bits / Legacy Interface: Feature bits}
@@ -4051,16 +4056,12 @@ device except where noted.
\item[VIRTIO_BLK_F_BARRIER (0)] Device supports request barriers.
\item[VIRTIO_BLK_F_SCSI (7)] Device supports scsi packet commands.
-
-\item[VIRTIO_BLK_F_FLUSH (9)] Cache flush command support.
-
-\item[VIRTIO_BLK_F_CONFIG_WCE (11)] Device can toggle its cache between writeback
- and writethrough modes.
\end{description}
-VIRTIO_BLK_F_FLUSH was also called VIRTIO_BLK_F_WCE: Legacy drivers
-MUST only negotiate this feature if they are capable of sending
-VIRTIO_BLK_T_FLUSH commands.
+\begin{note}
+ In the legacy interface, VIRTIO_BLK_F_FLUSH was also
+ called VIRTIO_BLK_F_WCE.
+\end{note}
\subsection{Device configuration layout}\label{sec:Device Types / Block Device / Device configuration layout}
@@ -4089,7 +4090,7 @@ struct virtio_blk_config {
// optimal (suggested maximum) I/O size in blocks
le32 opt_io_size;
} topology;
- u8 reserved;
+ u8 writeback;
};
\end{lstlisting}
@@ -4119,21 +4120,63 @@ according to the native endian of the guest rather than
\field{topology} struct can be read to determine the physical block size and optimal
I/O lengths for the driver to use. This also does not affect the units
in the protocol, only performance.
+
+\item If the VIRTIO_BLK_F_CONFIG_WCE feature is negotiated, the cache
+ mode can be read or set through the \field{writeback} field. 0 corresponds
+ to a writethrough cache, 1 to a writeback cache\footnote{Consistent with
+ \ref{devicenormative:Device Types / Block Device / Device Operation},
+ a writethrough cache can be defined broadly as a cache that commits
+ writes to persistent device backend storage before reporting their
+ completion. For example, a battery-backed writeback cache actually
+ counts as writethrough according to this definition.}. The cache mode
+ after reset can be either writeback or writethrough. The actual
+ mode can be determined by reading \field{writeback} after feature
+ negotiation.
\end{enumerate}
+\drivernormative{\subsubsection}{Device Initialization}{Device Types / Block Device / Device Initialization}
+
+Drivers SHOULD NOT negotiate VIRTIO_BLK_F_FLUSH if they are incapable of
+sending VIRTIO_BLK_T_FLUSH commands.
+
+If neither VIRTIO_BLK_F_CONFIG_WCE nor VIRTIO_BLK_F_FLUSH are
+negotiated, the driver MAY deduce the presence of a writethrough cache.
+If VIRTIO_BLK_F_CONFIG_WCE was not negotiated but VIRTIO_BLK_F_FLUSH was,
+the driver SHOULD assume presence of a writeback cache.
+
+The driver MUST NOT read \field{writeback} before setting
+the FEATURES_OK \field{status} bit.
+
+\devicenormative{\subsubsection}{Device Initialization}{Device Types / Block Device / Device Initialization}
+
+Devices SHOULD always offer VIRTIO_BLK_F_FLUSH, and MUST offer it
+if they offer VIRTIO_BLK_F_CONFIG_WCE.
+
+If VIRTIO_BLK_F_CONFIG_WCE is negotiated but VIRTIO_BLK_F_FLUSH
+is not, the device MUST initialize \field{writeback} to 0.
+
\subsubsection{Legacy Interface: Device Initialization}\label{sec:Device Types / Block Device / Device Initialization / Legacy Interface: Device Initialization}
-The \field{reserved} field used to be called \field{writeback}. If the
-VIRTIO_BLK_F_CONFIG_WCE feature is offered, the cache mode can be
-read from \field{writeback}; the
-driver can also write to the field in order to toggle the cache
-between writethrough (0) and writeback (1) mode. If the feature is
-not available, the driver can instead look at the result of
-negotiating VIRTIO_BLK_F_FLUSH: the cache will be in writeback mode
-after reset if and only if VIRTIO_BLK_F_FLUSH is negotiated.
+Because legacy devices do not have FEATURES_OK, transitional devices
+MUST implement slightly different behavior around feature negotiation
+when used through the legacy interface. In particular, when using the
+legacy interface:
+
+\begin{itemize}
+\item the driver MAY read or write \field{writeback} before setting
+ the DRIVER or DRIVER_OK \field{status} bit
+
+\item the device MUST NOT modify the cache mode (and \field{writeback})
+ as a result of a driver setting a status bit, unless
+ the DRIVER_OK bit is being set and the driver has not set the
+ VIRTIO_BLK_F_CONFIG_WCE driver feature bit.
+
+\item the device MUST NOT modify the cache mode (and \field{writeback})
+ as a result of a driver modifying the driver feature bits, for example
+ if the driver sets the VIRTIO_BLK_F_CONFIG_WCE driver feature bit but
+ does not set the VIRTIO_BLK_F_FLUSH bit.
+\end{itemize}
-Some older legacy devices did not operate in writethrough mode even
-after a driver announced lack of support for VIRTIO_BLK_F_FLUSH.
\subsection{Device Operation}\label{sec:Device Types / Block Device / Device Operation}
@@ -4183,14 +4226,66 @@ A driver SHOULD accept the VIRTIO_BLK_F_RO feature if offered.
A driver MUST set \field{sector} to 0 for a VIRTIO_BLK_T_FLUSH request.
A driver SHOULD NOT include any data in a VIRTIO_BLK_T_FLUSH request.
+If the VIRTIO_BLK_F_CONFIG_WCE feature is negotiated, the driver MAY
+switch to writethrough or writeback mode by writing respectively 0 and
+1 to the \field{writeback} field. After writing a 0 to \field{writeback},
+the driver MUST NOT assume that any volatile writes have been committed
+to persistent device backend storage.
+
\devicenormative{\subsubsection}{Device Operation}{Device Types / Block Device / Device Operation}
A device MUST set the \field{status} byte to VIRTIO_BLK_S_IOERR
for a write request if the VIRTIO_BLK_F_RO feature if offered, and MUST NOT
write any data.
-Upon receipt of a VIRTIO_BLK_T_FLUSH request, the device SHOULD ensure
-that any writes which were completed are committed to non-volatile storage.
+A write is considered volatile when it is submitted; the contents of
+sectors covered by a volatile write are undefined in persistent device
+backend storage until the write becomes stable. A write becomes stable
+once it is completed and one or more of the following conditions is true:
+
+\begin{enumerate}
+\item\label{item:flush1} neither VIRTIO_BLK_F_CONFIG_WCE nor
+ VIRTIO_BLK_F_FLUSH feature were negotiated, but VIRTIO_BLK_F_FLUSH was
+ offered by the device;
+
+\item\label{item:flush2} the VIRTIO_BLK_F_CONFIG_WCE feature was negotiated and the
+ \field{writeback} field in configuration space was 0 \textbf{all the time between
+ the submission of the write and its completion};
+
+\item\label{item:flush3} a VIRTIO_BLK_T_FLUSH request is sent \textbf{after the write is
+ completed} and is completed itself.
+\end{enumerate}
+
+If the device is backed by persistent storage, the device MUST ensure that
+stable writes are committed to it, before reporting completion of the write
+(cases~\ref{item:flush1} and~\ref{item:flush2}) or the flush
+(case~\ref{item:flush3}). Failure to do so can cause data loss
+in case of a crash.
+
+If the driver changes \field{writeback} between the submission of the write
+and its completion, the write could be either volatile or stable when
+its completion is reported; in other words, the exact behavior is undefined.
+
+% According to the device requirements for device initialization:
+% Offer(CONFIG_WCE) => Offer(FLUSH).
+%
+% After reversing the implication:
+% not Offer(FLUSH) => not Offer(CONFIG_WCE).
+
+If VIRTIO_BLK_F_FLUSH was not offered by the
+ device\footnote{Note that in this case, according to
+ \ref{devicenormative:Device Types / Block Device / Device Initialization},
+ the device will not have offered VIRTIO_BLK_F_CONFIG_WCE either.}, the
+device MAY also commit writes to persistent device backend storage before
+reporting their completion. Unlike case~\ref{item:flush1}, however, this
+is not an absolute requirement of the specification.
+
+\begin{note}
+ An implementation that does not offer VIRTIO_BLK_F_FLUSH and does not commit
+ completed writes will not be resilient to data loss in case of crashes.
+ Not offering VIRTIO_BLK_F_FLUSH is an absolute requirement
+ for implementations that do not wish to be safe against such data losses.
+\end{note}
\subsubsection{Legacy Interface: Device Operation}\label{sec:Device Types / Block Device / Device Operation / Legacy Interface: Device Operation}
When using the legacy interface, transitional devices and drivers
@@ -4233,6 +4328,12 @@ serve as data consistency guarantee. Only a VIRTIO_BLK_T_FLUSH request
does that.
\end{note}
+Some older legacy devices did not commit completed writes to persistent
+device backend storage when VIRTIO_BLK_F_FLUSH was offered but not
+negotiated. In order to work around this, the driver MAY set the
+\field{writeback} to 0 (if available) or it MAY send an explicit flush
+request after every completed write.
+
If the device has VIRTIO_BLK_F_SCSI feature, it can also support
scsi packet command requests, each of these requests is of form:
@@ -5577,7 +5678,7 @@ contents of \field{event}. The following events are defined:
\end{lstlisting}
By sending this event, the device signals a change in the configuration parameters
- of a logical unit, for example the capacity or caching mode.
+ of a logical unit, for example the capacity or cache mode.
\field{event} is set to VIRTIO_SCSI_T_PARAM_CHANGE.
\field{lun} addresses a logical unit in the SCSI host.