wiki/Salvator-X_MAXIM_camera_board/GSML-Control.ino


1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48


// GMSL Configuration
const int MAX16951_EN = 6;

void set_EN(int onoff)
{
    digitalWrite(MAX16951_EN, onoff);

    if (onoff)
      Serial.print("Pin High\n");
    else
      Serial.print("Pin Low\n");
}

void setup() {
  pinMode(MAX16951_EN, OUTPUT);
  set_EN(LOW);

  Serial.begin(115200);
  Serial.print("\n");
  //Serial.setDebugOutput(true);
}

void loop() {
  int i;
  // configure power-on state before delay
 
  set_EN(LOW);

  // blink a bit
  for (i=0; i<10; i++) {
    digitalWrite(LED_BUILTIN, HIGH);   // turn the LED on (HIGH is the voltage level)
    delay(50);                       // wait for 50 ms
    digitalWrite(LED_BUILTIN, LOW);    // turn the LED off by making the voltage LOW
    delay(50);                       // wait for 50 ms
  }
    
  // configure final state after delay
  set_EN(HIGH); 

  digitalWrite(LED_BUILTIN, HIGH);   // turn the LED on (HIGH is the voltage level)

  while(1) {
    delay(1000);
    // Serial.print("Spinning\n");
  }
}