summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2021-03-17linux: bsp-41x: non-target: Move support for non-connected CSI-2 receiverNiklas Söderlund
If the firmware lists a CSI-2 receiver as enabled but it's not connected to a CSI-2 transmitter the firmware description is faulty as it only describes half the CSI-2 bus. The CSI-2 bus is not a plug-and-play bus so either the bus is populate or it's not. Extending the CSI-2 receiver to probe and exist in an inoperable state makes no sens. Note this does not prevent the CSI-2 receiver node from being described in DT it just can't be enabled if it's not connected to a CSI-2 transmitter. Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-03-17linux: bsp-41x: mm vin triageNiklas Söderlund
Move mm vin commits from bsp-41x to separate tasks. Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
2021-03-17linux: bsp-41x: non-target: Move VIN no-op and defconfig commitsNiklas Söderlund
Commits that are no-ops and defconfig changes are not a good target to upport. Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-03-17linux: bsp-41x: non-target: Move VIN continues mode switchNiklas Söderlund
The upstream VIN driver have moved to use an internal scratch buffers which side steps all the problems with continuous vs non-continuous capture. Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-03-17linux: bsp-41x: mm csi2 triageNiklas Söderlund
Move mm csi2 commits from bsp-41x to separate tasks. Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-03-17linux: mm Add task for V4L2 multiplexed streamsNiklas Söderlund
There have been much debate about how multiplexed streams should be modeled in V4L2. There are multiple touch points in the BSP for this both for CSI-2 buses and to some extend GMSL. Add a catch all task that can collect all BSP use-cases where the current V4L2 limitations are worked around. Then when the upstream design is prepared we can make sure it will be able to cover all of the BSP needs. Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
2021-03-17linux: bsp-41x: mm adv748x triageNiklas Söderlund
Move mm adv748x commits from bsp-41x to separate tasks. Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-03-17linux: bsp-41x: mm adv7604 triageNiklas Söderlund
Move mm adv7604 commits from bsp-41x to separate tasks. Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-03-12projects: linux: io: updates for W10Wolfram Sang
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
2021-03-11projects: linux: core: clk: Update non-target for INTC-{AP,EX}Geert Uytterhoeven
Cfr. comments for bsp392_clk_renesas_intc_clock_removal. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2021-03-11projects: linux: core: Add task to enable full cpufreq/dvfsGeert Uytterhoeven
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2021-03-02projects: linux: io: add V3U task for CMT and TMUWolfram Sang
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
2021-03-02projects: linux: io: add task disable HW checksumming at runtimeWolfram Sang
Moved away from non-target, this is in deed an issue. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
2021-03-02linux: bsp-41x: move optee node patches to non-targetWolfram Sang
Reason given in periject commit a01c811202b8602d8a3d224262b94a1a97a7bd97. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
2021-03-01Auto-update sweep for v5.12-rc1Geert Uytterhoeven
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2021-03-01projects: linux: core: Mark bsp396_mfd_bd9574mwv doneGeert Uytterhoeven
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
2021-03-01projects: linux: core: Mark bsp392_pinctrl_sh-pfc_vin.yaml abandonedGeert Uytterhoeven
Equivalents in bsp-41x of remaining commits are tracked in bsp41x_pinctrl_vin. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
2021-03-01projects: linux: core: Mark bsp392_iommu_ipmmu-vmsa abandonedGeert Uytterhoeven
Equivalents in bsp-41x of remaining commits are tracked in bsp41x_ipmmu. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
2021-03-01projects: linux: core: Mark bsp392_clk_renesas_z_z2_clocks abandonedGeert Uytterhoeven
Equivalents in bsp-41x of remaining commits are tracked in bsp41x_clk_renesas. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
2021-03-01projects: linux: core: Mark bsp392_arm64_configs doneGeert Uytterhoeven
Equivalents in bsp-41x of remaining commits have been moved to non-target. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
2021-03-01projects: linux: core: pinctrl: Update commentsGeert Uytterhoeven
Cfr. comments for bsp392_pinctrl_sh-pfc_vin. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
2021-03-01projects: linux: core: ipmmu: Update non-target and commentsGeert Uytterhoeven
Cfr. comments for bsp392_iommu_ipmmu-vmsa. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
2021-03-01projects: linux: core: clk: Update non-target and commentsGeert Uytterhoeven
Cfr. comments for bsp392_clk_renesas_z_z2_clocks. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
2021-02-23linux: bsp-41x: non-target: Add upstream info (sysc)Geert Uytterhoeven
Fixes: 4386f2943bd8781f ("linux: bsp-41x: core sysc triage") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2021-02-23linux: bsp-41x: non-target: Add upstream info (ipmmu)Geert Uytterhoeven
Fixes: bcbdb54ec922959d ("linux: bsp-41x: core ipmmu triage") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2021-02-23linux: bsp-41x: non-target: Add upstream info (pinctrl)Geert Uytterhoeven
Fixes: 97128cf7be0b2f36 ("linux: bsp-41x: core pinctrl triage") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2021-02-23linux: bsp-41x: non-target: Add upstream info (clk)Geert Uytterhoeven
Fixes: 1ee0c1a78540a504 ("linux: bsp-41x: core clk triage") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2021-02-23linux: bsp-41x: non-target: Add upstream info (R-Car V3U)Geert Uytterhoeven
Fixes: d233c389f646c255 ("linux: bsp-41x: Move upstreamed R-Car V3U support to non target") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2021-02-23linux: bsp-41x: non-target: Add upstream info (defconfig)Geert Uytterhoeven
Fixes: a31097f9cc708561 ("linux: bsp-41x: Move upstreamed defconfig to non target") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2021-02-23linux: bsp-41x: non-target: Add upstream info (next-20210202 summary)Geert Uytterhoeven
Fixes: b954a1c79c659ee1 ("linux: bsp-41x: Move commits in next-20210202 to non target (summary)") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2021-02-23linux: bsp-41x: non-target: Add upstream info (v5.11-rc6 summary)Geert Uytterhoeven
Fixes: 6051a86b38141de1 ("linux: bsp-41x: Move commits in v5.11-rc6 to non target (summary)") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2021-02-23linux: bsp-41x: non-target: Add upstream info (v5.11-rc6 patch-id)Geert Uytterhoeven
Fixes: 67a256204a98df31 ("linux: bsp-41x: Move commits in v5.11-rc6 to non target (patch-id)") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2021-02-22wiki: add IO chatlog from 20210218Wolfram Sang
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
2021-02-22projects: linux: io: update tasks after last meetingWolfram Sang
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
2021-02-19projects: linux: mm: add new driver taskKuninori Morimoto
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
2021-02-19projects: linux: mm: update Sound task statusKuninori Morimoto
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
2021-02-19wiki: Add M/M chatlog for 2021-02-18Kuninori Morimoto
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
2021-02-19wiki: Add I/O chatlog for 2021-02-18Kuninori Morimoto
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
2021-02-18wiki: Add Core chatlog for 2021-02-18Geert Uytterhoeven
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2021-02-12Makefile: force symlinks to allow rebuildingWolfram Sang
Currently, "make -B" to rebuild everything fails because the symlinks are already there. Force them to allow the rebuild. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
2021-02-11scripts: Use yaml.safe_load()Laurent Pinchart
Before PyYAWL 4.1, yaml.load() can load to arbitrary code execution. yaml.safe_load() is recommended as a safe alternative. Starting at v4.1, yaml.load() calls yaml.safe_load(). See https://seclists.org/oss-sec/2018/q2/240 for more information. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2021-02-11projects: linux: io: update tasks after move to new gitWolfram Sang
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
2021-02-09scripts: remove myhtml.pyKuninori Morimoto
No one is using myhtml.py anymore. This patch removes it. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
2021-02-09scripts: add html_member/status/team/bsp.pyKuninori Morimoto
Because current PeriJect is using scripts/myhtml.py to creating all HTML files, all files will be re-created if myhtml.py itself was updated. It is very verbose. This patch separates "member", "status", "team", "bsp" from it. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
2021-02-09scripts: add html_menu.pyKuninori Morimoto
Because current PeriJect is using scripts/myhtml.py to creating all HTML files, all files will be re-created if myhtml.py itself was updated. It is very verbose. This patch separates "menu" from it. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
2021-02-09scripts: add html_index/body/subindex.pyKuninori Morimoto
Because current PeriJect is using scripts/myhtml.py to creating all HTML files, all files will be re-created if myhtml.py itself was updated. It is very verbose. This patch separates "index", "body", "subindex" from it. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
2021-02-09scripts: add html_wiki.pyKuninori Morimoto
Because current PeriJect is using scripts/myhtml.py to creating all HTML files, all files will be re-created if myhtml.py itself was updated. It is very verbose. This patch separates "wiki" from it. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
2021-02-09scripts: add html_summary.pyKuninori Morimoto
Because current PeriJect is using scripts/myhtml.py to creating all HTML files, all files will be re-created if myhtml.py itself was updated. It is very verbose. This patch separates "summary" from it. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
2021-02-09scripts: add html_task.pyKuninori Morimoto
Because current PeriJect is using scripts/myhtml.py to creating all HTML files, all files will be re-created if myhtml.py itself was updated. It is very verbose. This patch separates "task" from it. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
2021-02-08Add Schedule supportKuninori Morimoto
This patch adds SoC/BSP schedule support. PeriPeri member can know the Renesas plan from it. It is based on timesheet JavaScript which from below with small customize. https://github.com/sbstjn/timesheet.js.git Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-20 10:39:59 +0000