wiki: Porting M3W Salvator-X

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>

8 files changed, 90 insertions, 1 deletions

diff --git a/wiki/Hardware.wiki b/wiki/Hardware.wiki
index e6de403..433553d 100644
--- a/wiki/Hardware.wiki
+++ b/wiki/Hardware.wiki
@@ -36,7 +36,7 @@ h3. Renesas board
 | [[H3 Salvator-X]]      | O     | O       | O      |       | O       | O      | O      |        |       |
 | H3 Salvator-XS         | O     | O       | O      | O     | O       |        | O      |        | O     |
 | [[H3 ULCB]]            |       | O       |        |       |         |        |        |        | O     |
-| [[M3W SalvatorX]]      | O     | O       | O      | O     | O       | O      | O      | O      | O     |
+| [[M3W Salvator-X]]     | O     | O       | O      | O     | O       | O      | O      | O      | O     |
 | M3N Salvator-XS        | O     | O       | O      | O     | O       | O      | O      | O      | O     |
 | M3 ULCB                |       |         |        |       |         |        |        |     O  | O     |
 | [[V3H]]                |       |         |        |       |         |        |        |        |       |
diff --git a/wiki/M3W_Salvator-X.wiki b/wiki/M3W_Salvator-X.wiki
new file mode 100644
index 0000000..ee7672e
--- /dev/null
+++ b/wiki/M3W_Salvator-X.wiki
@@ -0,0 +1,89 @@
+h1. M3 Salvator-X
+
+h2. Update FirmWare
+
+# download update script from below
+# run script
+
+h3. SW10
+
+0 corresponds to the switch in the OFF position and 1 to the ON position. Bits are given in the 1-8 order.
+
+<pre>
+for update: xxxx 0000
+for use   : xxxx 1100 (HyperFlash =  80MHz, stable) or
+            xxxx 1101 (HyperFlash = 160MHz, aggressive)
+</pre>
+
+Maybe it is *1100 1100* or *1100 1101* on your board
+
+h3. Run script
+
+see readme
+<pre>
+./do_xls2.expect /dev/ttyUSB1 ./M3_Scif_Minimon_V0.10.mot ./table.txt
+</pre>
+
+h3. Log
+
+<pre>
+./do_xls2.expect /dev/ttyUSB1 ./M3_Scif_Minimon_V0.10.mot ./table.txt
+uploading loader file
+performing xls2 e6320000 000000 bootparam_sa0.srec
+performing xls2 e6302000 040000 bl2-salvator-x.srec
+performing xls2 e6320000 180000 cert_header_sa6.srec
+performing xls2 44000000 1c0000 bl31-salvator-x.srec
+performing xls2 44100000 200000 tee-salvator-x.srec
+performing xls2 49000000 640000 u-boot-elf.srec
+</pre>
+
+h3. version
+
+| "v2.9.0 lossy OFF":../../wiki/M3W_Salvator-X/M3_Yocto_290_lossy_off.tar.bz2 |BL2: R-Car Gen3 Initial Program Loader(CA57) Rev.1.0.7
+BL2: Built : 14:27:08, Aug  8 2016
+U-Boot 2015.04 (Aug 08 2016 - 13:38:06) |*require SWICH settings*
+- -SW6: 3 pin side-
+- SW7: 2 pin side |
+| "v2.12.0":../../wiki/M3W_Salvator-X/M3_Yocto_2120.tar.bz2|BL2: R-Car Gen3 Initial Program Loader(CA57) Rev.1.0.9
+BL2: Built : 10:48:08, Sep 16 2016
+U-Boot 2015.04 (Sep 16 2016 - 10:48:08) | PMIC will be shutdown on this version when S2RAM
+*require SWICH settings*
+- -SW6: 1 pin side (default is 3)-
+- SW7: 1 pin side (default is 2)
+- SW8: all OFF
+*How to S2RAM*
+- Set to PMIC to backup mode via i2c-tools command
+<pre># i2cset -f -y 7 0x30 0x20 0x0F</pre>
+- (Suspend) Change SW23 to OFF
+- Request System Suspend to RAM
+<pre># echo mem > /sys/power/state</pre>
+- (Resume) Change SW23 to ON |
+| "v2.16.0":../../wiki/M3W_Salvator-X/M3_Yocto_2160.tar.bz2|BL2: R-Car Gen3 Initial Program Loader(CA57) Rev.1.0.12
+BL2: Built : 08:28:19, Jan 30 2017
+U-Boot 2015.04 (Jan 30 2017 - 17:13:08)|*require SWICH settings*
+- -SW6: 1 pin side (default is 3)-
+- SW7: 1 pin side (default is 2)
+- SW8: all OFF
+*How to S2RAM*
+see above
+*uboot position* was moved from *H'49000000* to *H'50000000* |
+| "v2.19.0":../../wiki/M3W_Salvator-X/update_m3_salvator_bootloader_v2190.tar.bz2|BL2: R-Car Gen3 Initial Program Loader(CA57) Rev.1.0.14
+BL2: Built : 13:32:44, Apr 27 2017
+U-Boot 2015.04 (Apr 27 2017 - 13:38:24)|*require SWICH settings*
+- -SW6: 1 pin side (default is 3)-
+- SW7: 1 pin side (default is 2)
+- SW8: all OFF
+*How to S2RAM*
+see above|
+| "v2.23.0":../../wiki/M3W_Salvator-X/update_m3_salvator_bootloader_v2230.tar.bz2 <br> "v2.23.0 for ES1.1":../../wiki/M3W_Salvator-X/update_m3_salvator_bootloader_v2230_with_es1.1.tar.bz2|BL2: R-Car Gen3 Initial Program Loader(CA57) Rev.1.0.16
+BL2: Built : 16:55:50, Oct  2 2017
+U-Boot 2015.04 (Oct 02 2017 - 17:01:56) |*require SWICH settings*
+- -SW6: 1 pin side (default is 3)-
+- SW7: 1 pin side (default is 2)
+- SW8: all OFF
+*How to S2RAM*
+see above|
+
+h2. Release Note
+
+see "here":./H3_Salvator-X.html
diff --git a/wiki/M3W_Salvator-X/M3_Yocto_2120.tar.bz2 b/wiki/M3W_Salvator-X/M3_Yocto_2120.tar.bz2
new file mode 100644
index 0000000..993520a
--- /dev/null
+++ b/wiki/M3W_Salvator-X/M3_Yocto_2120.tar.bz2
diff --git a/wiki/M3W_Salvator-X/M3_Yocto_2160.tar.bz2 b/wiki/M3W_Salvator-X/M3_Yocto_2160.tar.bz2
new file mode 100644
index 0000000..9d61e37
--- /dev/null
+++ b/wiki/M3W_Salvator-X/M3_Yocto_2160.tar.bz2
diff --git a/wiki/M3W_Salvator-X/M3_Yocto_290_lossy_off.tar.bz2 b/wiki/M3W_Salvator-X/M3_Yocto_290_lossy_off.tar.bz2
new file mode 100644
index 0000000..6118a02
--- /dev/null
+++ b/wiki/M3W_Salvator-X/M3_Yocto_290_lossy_off.tar.bz2
diff --git a/wiki/M3W_Salvator-X/update_m3_salvator_bootloader_v2190.tar.bz2 b/wiki/M3W_Salvator-X/update_m3_salvator_bootloader_v2190.tar.bz2
new file mode 100644
index 0000000..db3a6d2
--- /dev/null
+++ b/wiki/M3W_Salvator-X/update_m3_salvator_bootloader_v2190.tar.bz2
diff --git a/wiki/M3W_Salvator-X/update_m3_salvator_bootloader_v2230.tar.bz2 b/wiki/M3W_Salvator-X/update_m3_salvator_bootloader_v2230.tar.bz2
new file mode 100644
index 0000000..2889caa
--- /dev/null
+++ b/wiki/M3W_Salvator-X/update_m3_salvator_bootloader_v2230.tar.bz2
diff --git a/wiki/M3W_Salvator-X/update_m3_salvator_bootloader_v2230_with_es1.1.tar.bz2 b/wiki/M3W_Salvator-X/update_m3_salvator_bootloader_v2230_with_es1.1.tar.bz2
new file mode 100644
index 0000000..5943323
--- /dev/null
+++ b/wiki/M3W_Salvator-X/update_m3_salvator_bootloader_v2230_with_es1.1.tar.bz2