wiki: Porting wiki: Porting Chat Log

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>

1 files changed, 99 insertions, 0 deletions

diff --git a/wiki/Chat_log/20190221-io-chatlog b/wiki/Chat_log/20190221-io-chatlog
new file mode 100644
index 0000000..67989cb
--- /dev/null
+++ b/wiki/Chat_log/20190221-io-chatlog
@@ -0,0 +1,99 @@
+09:04 < wsa> welcome to today's IO meeting
+09:04 < wsa> status reports:
+09:04 < wsa> Status updates
+09:04 < wsa> ==============
+09:04 < wsa> A - what have I done since last time
+09:04 < wsa> ------------------------------------
+09:04 < wsa> Geert
+09:04 < wsa> : tested at25 spimem conversion, replaced spi_master by spi_controller in
+09:04 < wsa>   various SPI drivers, and preliminary testing of SCIF5 DMA on R-Car E3
+09:04 < wsa> Marek
+09:04 < wsa> : worked on various SDHI issues in U-Boot, upported eMMC reset patch for SDHI,
+09:04 < wsa>   got thermal patch which adds hwmon interfaces merged
+09:04 < wsa> Shimoda-san
+09:04 < wsa> :
+09:04 < wsa> Simon
+09:04 < wsa> : posted fix for AVB phy-mode on Draak, needs testing
+09:04 < wsa> Wolfram
+09:04 < wsa> : implemented a fault injector to simulate 'arbitration lost' without having a
+09:04 < wsa>   multi-master setup, implemented a fault injector which panics during a
+09:04 < wsa>   transfer so rebooting with an inconsistent bus state can be tested, converted
+09:04 < wsa>   Gen2/3 IIC to use a better formula to calc the freqs, upported SDHI patch for
+09:04 < wsa>   HW adjustment depending on speed mode, reviewed a few I2C and SDHI patches,
+09:04 < wsa>   converted and pushed first periject data, sent my first glibc patch
+09:04 < wsa> B - what I want to do until next time
+09:04 < wsa> -------------------------------------
+09:04 < wsa> Geert
+09:04 < wsa> : wants to do more testing of SCIF5 DMA on R-Car E3
+09:04 < wsa> Kaneko-san
+09:04 < wsa> : wants to pport temperature calculation fixes for R-Car Gen3 and RZ/G2 SoCs
+09:04 < wsa> Niklas
+09:04 < wsa> : wants to nbox APE6EVM and make sure it boots and hopefully have a first look
+09:04 < wsa>   at the MMC PM imbalance issue
+09:04 < wsa> Shimoda-san
+09:04 < wsa> : wants to
+09:04 < wsa> Simon
+09:04 < wsa> : wants to asses RAVB patches in BSP v3.9.2, measure MMC performance across
+09:04 < wsa>   various Gen3 boards
+09:04 < wsa> Wolfram
+09:04 < wsa> : wants to upport I2C patches, continue working on atomic I2C transfers, assist
+09:04 < wsa>   with whatever topics JapaPERI brings to the table
+09:04 < wsa> C - problems I currently have
+09:04 < wsa> -----------------------------
+09:04 < wsa> None reported
+09:05 < wsa> I am still waiting for Shimoda-san's report, I guess it will come along...
+09:05 < wsa> I dropped all "meetings in BE" items because for me the reports should have been since the meetings in BE :)
+09:06 < wsa> geertu: any plans for the MSIOF patches in bsp392?
+09:06 < wsa> Marex: wasn't there also PCIe link handling in ATF as B)?
+09:07 < Marex> PCI link handling in ATF is in submitted PR
+09:07 < wsa> neg: can we drop the "hopefully" from the SDHI clk imbalance thing?
+09:07 < Marex> since a few hours ago
+09:07 < wsa> Marex: cool!
+09:07 < Marex> (before I went to bed)
+09:08 < wsa> uli___: dunno if you maybe did it already, but could you test the D3 phy patch that Simon mentioned in his report?
+09:08 < neg> wsa: Depends on how confident you are that the APE6EVM works :-) Magnus warned me its status is unkown. But yes please remover it form the report
+09:08 < uli___> wsa: can do
+09:08 < wsa> uli___: thx
+09:08 < geertu> wsa: Is there anything non-controversial w.r.t. MSIOF left?
+09:09 < wsa> neg: ah, "hopefully" means "if the board works" and not "if I have time"?
+09:09 < wsa> geertu: if it is controversial, please add comments to the ticket file, so I know
+09:09 < neg> wsa: Yes
+09:10 < wsa> neg: ah, good, I misunderstood this. Let me know how the board is doing :)
+09:10 < neg> Will do, plan is to try it on Monday
+09:11 < wsa> sounds good
+09:12 < wsa> what is so special about SCIF5 DMA on Ebisu, BTW?
+09:13 < geertu> The DMA documentation about it was wrong, so DT was wrong, too
+09:14 < wsa> I see
+09:14 < wsa> any questions from your side?
+09:15 < geertu> I sort of verified the new one is OK, but am now looking for CP45 on the board, to connect a probe ;-)
+09:15 < wsa> oh, we are on that level :)
+09:16 < wsa> neg: do you still have that SDIO WIFI card or did you give it to JapaPERI?
+09:16 < neg> I still have it
+09:17 < neg> I try it from time to time tracking progress in the thread 'Test of EVK-EMMY-W161-A on Koelsch with SDR50 and SDR104' ;-)
+09:18 < wsa> can you just check if it works with SDR104 for you? When testing Sergei's patch, I had to reduce it to SDR50 to make it probe :(
+09:18 < Marex> geertu: I wonder what else is wrong on E3 Ebisu ... maybe the SDHI performance ?
+09:18 < wsa> My test was on M3N
+09:19 < geertu> Marex: Have you looked into the meaning of the values written to the QoS registers?
+09:20 < neg> wsa: to be clear SDIO + M3N + '[PATCH v3] mmc: tmio_mmc_core: don't claim spurious interrupts' right?
+09:21 < Marex> geertu: is there any documentation besides "QoS Level x Threshold y Setting" ?
+09:21 < Marex> geertu: besides, we do not know whether it is QoS problem at all
+09:21 < wsa> neg: yes. but other Gen3 boards are interesting, too
+09:22 < wsa> neg: and the probing should really be independent of Sergei's patch
+09:22 < neg> wsa: OK will do
+09:22 < wsa> thx!
+09:23 < geertu> Marex: From a quick glance, I already read things like "1.95 usec not supported on E3", so it uses 7.80 intead
+09:24 < Marex> geertu: both work, changing that doesn't help
+09:24 < Marex> geertu: and I think it was using 3.9 , not 7.8
+09:25 < Marex> geertu: IIRC you can select either or with a MD switch
+09:25 < geertu> ok
+09:25 < neg> wsa: for reference did you test on top of mmc/fixes or mmc/next ?
+09:25 < Marex> and if not, rebuild ATF for either or ... nonetheless, doesn't help
+09:26 < Marex> either the SDHI is somehow underclock, or the bus somewhere between SDHI and DRAM is too narrow , or there's DRAM bottleneck
+09:27 < wsa> neg: hmmm, either mmc/next or v5.0-rcX. Need to look this up, code is on another machine...
+09:27 < Marex> DRAM bottleneck is unlikely, I did memtester and calculations, it gives more then plenty of bandwidth ... way more than 400 MB/s
+09:27 < Marex> s/memtester/lmbench/
+09:27 < neg> wsa: OK no worries I figure it out
+09:28 < wsa> shall we move to core meeting then?
+09:29 < wsa> looks like it
+09:29 < wsa> geertu: the stage is yours
+09:29 < wsa> thanks for this meeting!