path: root/shared-core/r300_cmdbuf.c

/* r300_cmdbuf.c -- Command buffer emission for R300 -*- linux-c -*-
 *
 * Copyright (C) The Weather Channel, Inc.  2002.
 * Copyright (C) 2004 Nicolai Haehnle.
 * All Rights Reserved.
 *
 * The Weather Channel (TM) funded Tungsten Graphics to develop the
 * initial release of the Radeon 8500 driver under the XFree86 license.
 * This notice must be preserved.
 *
 * Permission is hereby granted, free of charge, to any person obtaining a
 * copy of this software and associated documentation files (the "Software"),
 * to deal in the Software without restriction, including without limitation
 * the rights to use, copy, modify, merge, publish, distribute, sublicense,
 * and/or sell copies of the Software, and to permit persons to whom the
 * Software is furnished to do so, subject to the following conditions:
 *
 * The above copyright notice and this permission notice (including the next
 * paragraph) shall be included in all copies or substantial portions of the
 * Software.
 *
 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
 * PRECISION INSIGHT AND/OR ITS SUPPLIERS BE LIABLE FOR ANY CLAIM, DAMAGES OR
 * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
 * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
 * DEALINGS IN THE SOFTWARE.
 *
 * Authors:
 *    Nicolai Haehnle <prefect_@gmx.net>
 */

#include "drmP.h"
#include "drm.h"
#include "radeon_drm.h"
#include "radeon_drv.h"
#include "r300_reg.h"

#define R300_SIMULTANEOUS_CLIPRECTS		4

/* Values for R300_RE_CLIPRECT_CNTL depending on the number of cliprects
 */
static const int r300_cliprect_cntl[4] = {
	0xAAAA,
	0xEEEE,
	0xFEFE,
	0xFFFE
};

/**
 * Emit up to R300_SIMULTANEOUS_CLIPRECTS cliprects from the given command
 * buffer, starting with index n.
 */
static int r300_emit_cliprects(drm_radeon_private_t *dev_priv,
			       drm_radeon_kcmd_buffer_t *cmdbuf, int n)
{
	drm_clip_rect_t box;
	int nr;
	int i;
	RING_LOCALS;

	nr = cmdbuf->nbox - n;
	if (nr > R300_SIMULTANEOUS_CLIPRECTS)
		nr = R300_SIMULTANEOUS_CLIPRECTS;

	DRM_DEBUG("%i cliprects\n", nr);

	if (nr) {
		BEGIN_RING(6 + nr * 2);
		OUT_RING(CP_PACKET0(R300_RE_CLIPRECT_TL_0, nr * 2 - 1));

		for (i = 0; i < nr; ++i) {
			if (DRM_COPY_FROM_USER_UNCHECKED
			    (&box, &cmdbuf->boxes[n + i], sizeof(box))) {
				DRM_ERROR("copy cliprect faulted\n");
				return DRM_ERR(EFAULT);
			}

			box.x1 =
			    (box.x1 +
			     R300_CLIPRECT_OFFSET) & R300_CLIPRECT_MASK;
			box.y1 =
			    (box.y1 +
			     R300_CLIPRECT_OFFSET) & R300_CLIPRECT_MASK;
			box.x2 =
			    (box.x2 +
			     R300_CLIPRECT_OFFSET) & R300_CLIPRECT_MASK;
			box.y2 =
			    (box.y2 +
			     R300_CLIPRECT_OFFSET) & R300_CLIPRECT_MASK;

			OUT_RING((box.x1 << R300_CLIPRECT_X_SHIFT) |
				 (box.y1 << R300_CLIPRECT_Y_SHIFT));
			OUT_RING((box.x2 << R300_CLIPRECT_X_SHIFT) |
				 (box.y2 << R300_CLIPRECT_Y_SHIFT));
		}

		OUT_RING_REG(R300_RE_CLIPRECT_CNTL, r300_cliprect_cntl[nr - 1]);

		/* TODO/SECURITY: Force scissors to a safe value, otherwise the
		 * client might be able to trample over memory.
		 * The impact should be very limited, but I'd rather be safe than
		 * sorry.
		 */
		OUT_RING(CP_PACKET0(R300_RE_SCISSORS_TL, 1));
		OUT_RING(0);
		OUT_RING(R300_SCISSORS_X_MASK | R300_SCISSORS_Y_MASK);
		ADVANCE_RING();
	} else {
		/* Why we allow zero cliprect rendering:
		 * There are some commands in a command buffer that must be submitted
		 * even when there are no cliprects, e.g. DMA buffer discard
		 * or state setting (though state setting could be avoided by
		 * simulating a loss of context).
		 *
		 * Now since the cmdbuf interface is so chaotic right now (and is
		 * bound to remain that way for a bit until things settle down),
		 * it is basically impossible to filter out the commands that are
		 * necessary and those that aren't.
		 *
		 * So I choose the safe way and don't do any filtering at all;
		 * instead, I simply set up the engine so that all rendering
		 * can't produce any fragments.
		 */
		BEGIN_RING(2);
		OUT_RING_REG(R300_RE_CLIPRECT_CNTL, 0);
		ADVANCE_RING();
	}

	return 0;
}

static u8 r300_reg_flags[0x10000 >> 2];

void r300_init_reg_flags(void)
{
	int i;
	memset(r300_reg_flags, 0, 0x10000 >> 2);
#define ADD_RANGE_MARK(reg, count,mark) \
		for(i=((reg)>>2);i<((reg)>>2)+(count);i++)\
			r300_reg_flags[i]|=(mark);

#define MARK_SAFE		1
#define MARK_CHECK_OFFSET	2

#define ADD_RANGE(reg, count)	ADD_RANGE_MARK(reg, count, MARK_SAFE)

	/* these match cmducs() command in r300_driver/r300/r300_cmdbuf.c */
	ADD_RANGE(R300_SE_VPORT_XSCALE, 6);
	ADD_RANGE(0x2080, 1);
	ADD_RANGE(R300_SE_VTE_CNTL, 2);
	ADD_RANGE(0x2134, 2);
	ADD_RANGE(0x2140, 1);
	ADD_RANGE(R300_VAP_INPUT_CNTL_0, 2);
	ADD_RANGE(0x21DC, 1);
	ADD_RANGE(0x221C, 1);
	ADD_RANGE(0x2220, 4);
	ADD_RANGE(0x2288, 1);
	ADD_RANGE(R300_VAP_OUTPUT_VTX_FMT_0, 2);
	ADD_RANGE(R300_VAP_PVS_CNTL_1, 3);
	ADD_RANGE(R300_GB_ENABLE, 1);
	ADD_RANGE(R300_GB_MSPOS0, 5);
	ADD_RANGE(R300_TX_CNTL, 1);
	ADD_RANGE(R300_TX_ENABLE, 1);
	ADD_RANGE(0x4200, 4);
	ADD_RANGE(0x4214, 1);
	ADD_RANGE(R300_RE_POINTSIZE, 1);
	ADD_RANGE(0x4230, 3);
	ADD_RANGE(R300_RE_LINE_CNT, 1);
	ADD_RANGE(0x4238, 1);
	ADD_RANGE(0x4260, 3);
	ADD_RANGE(0x4274, 4);
	ADD_RANGE(0x4288, 5);
	ADD_RANGE(0x42A0, 1);
	ADD_RANGE(R300_RE_ZBIAS_T_FACTOR, 4);
	ADD_RANGE(0x42B4, 1);
	ADD_RANGE(R300_RE_CULL_CNTL, 1);
	ADD_RANGE(0x42C0, 2);
	ADD_RANGE(R300_RS_CNTL_0, 2);
	ADD_RANGE(R300_RS_INTERP_0, 8);
	ADD_RANGE(R300_RS_ROUTE_0, 8);
	ADD_RANGE(0x43A4, 2);
	ADD_RANGE(0x43E8, 1);
	ADD_RANGE(R300_PFS_CNTL_0, 3);
	ADD_RANGE(R300_PFS_NODE_0, 4);
	ADD_RANGE(R300_PFS_TEXI_0, 64);
	ADD_RANGE(0x46A4, 5);
	ADD_RANGE(R300_PFS_INSTR0_0, 64);
	ADD_RANGE(R300_PFS_INSTR1_0, 64);
	ADD_RANGE(R300_PFS_INSTR2_0, 64);
	ADD_RANGE(R300_PFS_INSTR3_0, 64);
	ADD_RANGE(0x4BC0, 1);
	ADD_RANGE(0x4BC8, 3);
	ADD_RANGE(R300_PP_ALPHA_TEST, 2);
	ADD_RANGE(0x4BD8, 1);
	ADD_RANGE(R300_PFS_PARAM_0_X, 64);
	ADD_RANGE(0x4E00, 1);
	ADD_RANGE(R300_RB3D_CBLEND, 2);
	ADD_RANGE(R300_RB3D_COLORMASK, 1);
	ADD_RANGE(0x4E10, 3);
	ADD_RANGE_MARK(R300_RB3D_COLOROFFSET0, 1, MARK_CHECK_OFFSET);	/* check offset */
	ADD_RANGE(R300_RB3D_COLORPITCH0, 1);
	ADD_RANGE(0x4E50, 9);
	ADD_RANGE(0x4E88, 1);
	ADD_RANGE(0x4EA0, 2);
	ADD_RANGE(R300_RB3D_ZSTENCIL_CNTL_0, 3);
	ADD_RANGE(0x4F10, 4);
	ADD_RANGE_MARK(R300_RB3D_DEPTHOFFSET, 1, MARK_CHECK_OFFSET);	/* check offset */
	ADD_RANGE(R300_RB3D_DEPTHPITCH, 1);
	ADD_RANGE(0x4F28, 1);
	ADD_RANGE(0x4F30, 2);
	ADD_RANGE(0x4F44, 1);
	ADD_RANGE(0x4F54, 1);

	ADD_RANGE(R300_TX_FILTER_0, 16);
	ADD_RANGE(R300_TX_FILTER1_0, 16);
	ADD_RANGE(R300_TX_SIZE_0, 16);
	ADD_RANGE(R300_TX_FORMAT_0, 16);
	ADD_RANGE(R300_TX_PITCH_0, 16);
	/* Texture offset is dangerous and needs more checking */
	ADD_RANGE_MARK(R300_TX_OFFSET_0, 16, MARK_CHECK_OFFSET);
	ADD_RANGE(R300_TX_CHROMA_KEY_0, 16);
	ADD_RANGE(R300_TX_BORDER_COLOR_0, 16);

	/* Sporadic registers used as primitives are emitted */
	ADD_RANGE(0x4f18, 1);
	ADD_RANGE(R300_RB3D_DSTCACHE_CTLSTAT, 1);
	ADD_RANGE(R300_VAP_INPUT_ROUTE_0_0, 8);
	ADD_RANGE(R300_VAP_INPUT_ROUTE_1_0, 8);

}

static __inline__ int r300_check_range(unsigned reg, int count)
{
	int i;
	if (reg & ~0xffff)
		return -1;
	for (i = (reg >> 2); i < (reg >> 2) + count; i++)
		if (r300_reg_flags[i] != MARK_SAFE)
			return 1;
	return 0;
}

  /* we expect offsets passed to the framebuffer to be either within video memory or
     within AGP space */
static __inline__ int r300_check_offset(drm_radeon_private_t *dev_priv,
					u32 offset)
{
	/* we realy want to check against end of video aperture
	   but this value is not being kept.
	   This code is correct for now (does the same thing as the
	   code that sets MC_FB_LOCATION) in radeon_cp.c */
	if ((offset >= dev_priv->fb_location) &&
	    (offset < dev_priv->gart_vm_start))
		return 0;
	if ((offset >= dev_priv->gart_vm_start) &&
	    (offset < dev_priv->gart_vm_start + dev_priv->gart_size))
		return 0;
	return 1;
}

static __inline__ int r300_emit_carefully_checked_packet0(drm_radeon_private_t *
							  dev_priv,
							  drm_radeon_kcmd_buffer_t
							  * cmdbuf,
							  drm_r300_cmd_header_t
							  header)
{
	int reg;
	int sz;
	int i;
	int values[64];
	RING_LOCALS;

	sz = header.packet0.count;
	reg = (header.packet0.reghi << 8) | header.packet0.reglo;

	if ((sz > 64) || (sz < 0)) {
		DRM_ERROR
		    ("Cannot emit more than 64 values at a time (reg=%04x sz=%d)\n",
		     reg, sz);
		return DRM_ERR(EINVAL);
	}
	for (i = 0; i < sz; i++) {
		values[i] = ((int *)cmdbuf->buf)[i];
		switch (r300_reg_flags[(reg >> 2) + i]) {
		case MARK_SAFE:
			break;
		case MARK_CHECK_OFFSET:
			if (r300_check_offset(dev_priv, (u32) values[i])) {
				DRM_ERROR
				    ("Offset failed range check (reg=%04x sz=%d)\n",
				     reg, sz);
				return DRM_ERR(EINVAL);
			}
			break;
		default:
			DRM_ERROR("Register %04x failed check as flag=%02x\n",
				  reg + i * 4, r300_reg_flags[(reg >> 2) + i]);
			return DRM_ERR(EINVAL);
		}
	}

	BEGIN_RING(1 + sz);
	OUT_RING(CP_PACKET0(reg, sz - 1));
	OUT_RING_TABLE(values, sz);
	ADVANCE_RING();

	cmdbuf->buf += sz * 4;
	cmdbuf->bufsz -= sz * 4;

	return 0;
}

/**
 * Emits a packet0 setting arbitrary registers.
 * Called by r300_do_cp_cmdbuf.
 *
 * Note that checks are performed on contents and addresses of the registers
 */
static __inline__ int r300_emit_packet0(drm_radeon_private_t *dev_priv,
					drm_radeon_kcmd_buffer_t *cmdbuf,
					drm_r300_cmd_header_t header)
{
	int reg;
	int sz;
	RING_LOCALS;

	sz = header.packet0.count;
	reg = (header.packet0.reghi << 8) | header.packet0.reglo;

	if (!sz)
		return 0;

	if (sz * 4 > cmdbuf->bufsz)
		return DRM_ERR(EINVAL);

	if (reg + sz * 4 >= 0x10000) {
		DRM_ERROR("No such registers in hardware reg=%04x sz=%d\n", reg,
			  sz);
		return DRM_ERR(EINVAL);
	}

	if (r300_check_range(reg, sz)) {
		/* go and check everything */
		return r300_emit_carefully_checked_packet0(dev_priv, cmdbuf,
							   header);
	}
	/* the rest of the data is safe to emit, whatever the values the user passed */

	BEGIN_RING(1 + sz);
	OUT_RING(CP_PACKET0(reg, sz - 1));
	OUT_RING_TABLE((int *)cmdbuf->buf, sz);
	ADVANCE_RING();

	cmdbuf->buf += sz * 4;
	cmdbuf->bufsz -= sz * 4;

	return 0;
}

/**
 * Uploads user-supplied vertex program instructions or parameters onto
 * the graphics card.
 * Called by r300_do_cp_cmdbuf.
 */
static __inline__ int r300_emit_vpu(drm_radeon_private_t *dev_priv,
				    drm_radeon_kcmd_buffer_t *cmdbuf,
				    drm_r300_cmd_header_t header)
{
	int sz;
	int addr;
	RING_LOCALS;

	sz = header.vpu.count;
	addr = (header.vpu.adrhi << 8) | header.vpu.adrlo;

	if (!sz)
		return 0;
	if (sz * 16 > cmdbuf->bufsz)
		return DRM_ERR(EINVAL);

	BEGIN_RING(5 + sz * 4);
	/* Wait for VAP to come to senses.. */
	/* there is no need to emit it multiple times, (only once before VAP is programmed,
	   but this optimization is for later */
	OUT_RING_REG(R300_VAP_PVS_WAITIDLE, 0);
	OUT_RING_REG(R300_VAP_PVS_UPLOAD_ADDRESS, addr);
	OUT_RING(CP_PACKET0_TABLE(R300_VAP_PVS_UPLOAD_DATA, sz * 4 - 1));
	OUT_RING_TABLE((int *)cmdbuf->buf, sz * 4);

	ADVANCE_RING();

	cmdbuf->buf += sz * 16;
	cmdbuf->bufsz -= sz * 16;

	return 0;
}

/**
 * Emit a clear packet from userspace.
 * Called by r300_emit_packet3.
 */
static __inline__ int r300_emit_clear(drm_radeon_private_t *dev_priv,
				      drm_radeon_kcmd_buffer_t *cmdbuf)
{
	RING_LOCALS;

	if (8 * 4 > cmdbuf->bufsz)
		return DRM_ERR(EINVAL);

	BEGIN_RING(10);
	OUT_RING(CP_PACKET3(R200_3D_DRAW_IMMD_2, 8));
	OUT_RING(R300_PRIM_TYPE_POINT | R300_PRIM_WALK_RING |
		 (1 << R300_PRIM_NUM_VERTICES_SHIFT));
	OUT_RING_TABLE((int *)cmdbuf->buf, 8);
	ADVANCE_RING();

	cmdbuf->buf += 8 * 4;
	cmdbuf->bufsz -= 8 * 4;

	return 0;
}

static __inline__ int r300_emit_3d_load_vbpntr(drm_radeon_private_t *dev_priv,
					       drm_radeon_kcmd_buffer_t *cmdbuf,
					       u32 header)
{
	int count, i, k;
#define MAX_ARRAY_PACKET  64
	u32 payload[MAX_ARRAY_PACKET];
	u32 narrays;
	RING_LOCALS;

	count = (header >> 16) & 0x3fff;

	if ((count + 1) > MAX_ARRAY_PACKET) {
		DRM_ERROR("Too large payload in 3D_LOAD_VBPNTR (count=%d)\n",
			  count);
		return DRM_ERR(EINVAL);
	}
	memset(payload, 0, MAX_ARRAY_PACKET * 4);
	memcpy(payload, cmdbuf->buf + 4, (count + 1) * 4);

	/* carefully check packet contents */

	narrays = payload[0];
	k = 0;
	i = 1;
	while ((k < narrays) && (i < (count + 1))) {
		i++;		/* skip attribute field */
		if (r300_check_offset(dev_priv, payload[i])) {
			DRM_ERROR
			    ("Offset failed range check (k=%d i=%d) while processing 3D_LOAD_VBPNTR packet.\n",
			     k, i);
			return DRM_ERR(EINVAL);
		}
		k++;
		i++;
		if (k == narrays)
			break;
		/* have one more to process, they come in pairs */
		if (r300_check_offset(dev_priv, payload[i])) {
			DRM_ERROR
			    ("Offset failed range check (k=%d i=%d) while processing 3D_LOAD_VBPNTR packet.\n",
			     k, i);
			return DRM_ERR(EINVAL);
		}
		k++;
		i++;
	}
	/* do the counts match what we expect ? */
	if ((k != narrays) || (i != (count + 1))) {
		DRM_ERROR
		    ("Malformed 3D_LOAD_VBPNTR packet (k=%d i=%d narrays=%d count+1=%d).\n",
		     k, i, narrays, count + 1);
		return DRM_ERR(EINVAL);
	}

	/* all clear, output packet */

	BEGIN_RING(count + 2);
	OUT_RING(header);
	OUT_RING_TABLE(payload, count + 1);
	ADVANCE_RING();

	cmdbuf->buf += (count + 2) * 4;
	cmdbuf->bufsz -= (count + 2) * 4;

	return 0;
}

static __inline__ int r300_emit_raw_packet3(drm_radeon_private_t *dev_priv,
					    drm_radeon_kcmd_buffer_t *cmdbuf)
{
	u32 header;
	int count;
	RING_LOCALS;

	if (4 > cmdbuf->bufsz)
		return DRM_ERR(EINVAL);

	/* Fixme !! This simply emits a packet without much checking.
	   We need to be smarter. */

	/* obtain first word - actual packet3 header */
	header = *(u32 *) cmdbuf->buf;

	/* Is it packet 3 ? */
	if ((header >> 30) != 0x3) {
		DRM_ERROR("Not a packet3 header (0x%08x)\n", header);
		return DRM_ERR(EINVAL);
	}

	count = (header >> 16) & 0x3fff;

	/* Check again now that we know how much data to expect */
	if ((count + 2) * 4 > cmdbuf->bufsz) {
		DRM_ERROR
		    ("Expected packet3 of length %d but have only %d bytes left\n",
		     (count + 2) * 4, cmdbuf->bufsz);
		return DRM_ERR(EINVAL);
	}

	/* Is it a packet type we know about ? */
	switch (header & 0xff00) {
	case RADEON_3D_LOAD_VBPNTR:	/* load vertex array pointers */
		return r300_emit_3d_load_vbpntr(dev_priv, cmdbuf, header);

	case RADEON_CP_3D_DRAW_IMMD_2:	/* triggers drawing using in-packet vertex data */
	case RADEON_CP_3D_DRAW_VBUF_2:	/* triggers drawing of vertex buffers setup elsewhere */
	case RADEON_CP_3D_DRAW_INDX_2:	/* triggers drawing using indices to vertex buffer */
	case RADEON_CP_INDX_BUFFER:	/* DRAW_INDX_2 without INDX_BUFFER seems to lock up the gpu */
	case RADEON_WAIT_FOR_IDLE:
	case RADEON_CP_NOP:
		/* these packets are safe */
		break;
	default:
		DRM_ERROR("Unknown packet3 header (0x%08x)\n", header);
		return DRM_ERR(EINVAL);
	}

	BEGIN_RING(count + 2);
	OUT_RING(header);
	OUT_RING_TABLE((int *)(cmdbuf->buf + 4), count + 1);
	ADVANCE_RING();

	cmdbuf->buf += (count + 2) * 4;
	cmdbuf->bufsz -= (count + 2) * 4;

	return 0;
}

/**
 * Emit a rendering packet3 from userspace.
 * Called by r300_do_cp_cmdbuf.
 */
static __inline__ int r300_emit_packet3(drm_radeon_private_t *dev_priv,
					drm_radeon_kcmd_buffer_t *cmdbuf,
					drm_r300_cmd_header_t header)
{
	int n;
	int ret;
	char *orig_buf = cmdbuf->buf;
	int orig_bufsz = cmdbuf->bufsz;

	/* This is a do-while-loop so that we run the interior at least once,
	 * even if cmdbuf->nbox is 0. Compare r300_emit_cliprects for rationale.
	 */
	n = 0;
	do {
		if (cmdbuf->nbox > R300_SIMULTANEOUS_CLIPRECTS) {
			ret = r300_emit_cliprects(dev_priv, cmdbuf, n);
			if (ret)
				return ret;

			cmdbuf->buf = orig_buf;
			cmdbuf->bufsz = orig_bufsz;
		}

		switch (header.packet3.packet) {
		case R300_CMD_PACKET3_CLEAR:
			DRM_DEBUG("R300_CMD_PACKET3_CLEAR\n");
			ret = r300_emit_clear(dev_priv, cmdbuf);
			if (ret) {
				DRM_ERROR("r300_emit_clear failed\n");
				return ret;
			}
			break;

		case R300_CMD_PACKET3_RAW:
			DRM_DEBUG("R300_CMD_PACKET3_RAW\n");
			ret = r300_emit_raw_packet3(dev_priv, cmdbuf);
			if (ret) {
				DRM_ERROR("r300_emit_raw_packet3 failed\n");
				return ret;
			}
			break;

		default:
			DRM_ERROR("bad packet3 type %i at %p\n",
				  header.packet3.packet,
				  cmdbuf->buf - sizeof(header));
			return DRM_ERR(EINVAL);
		}

		n += R300_SIMULTANEOUS_CLIPRECTS;
	} while (n < cmdbuf->nbox);

	return 0;
}

/* Some of the R300 chips seem to be extremely touchy about the two registers
 * that are configured in r300_pacify.
 * Among the worst offenders seems to be the R300 ND (0x4E44): When userspace
 * sends a command buffer that contains only state setting commands and a
 * vertex program/parameter upload sequence, this will eventually lead to a
 * lockup, unless the sequence is bracketed by calls to r300_pacify.
 * So we should take great care to *always* call r300_pacify before
 * *anything* 3D related, and again afterwards. This is what the
 * call bracket in r300_do_cp_cmdbuf is for.
 */

/**
 * Emit the sequence to pacify R300.
 */
static __inline__ void r300_pacify(drm_radeon_private_t *dev_priv)
{
	RING_LOCALS;

	BEGIN_RING(6);
	OUT_RING(CP_PACKET0(R300_RB3D_DSTCACHE_CTLSTAT, 0));
	OUT_RING(0xa);
	OUT_RING(CP_PACKET0(0x4f18, 0));
	OUT_RING(0x3);
	OUT_RING(CP_PACKET3(RADEON_CP_NOP, 0));
	OUT_RING(0x0);
	ADVANCE_RING();
}

/**
 * Called by r300_do_cp_cmdbuf to update the internal buffer age and state.
 * The actual age emit is done by r300_do_cp_cmdbuf, which is why you must
 * be careful about how this function is called.
 */
static void r300_discard_buffer(drm_device_t * dev, drm_buf_t * buf)
{
	drm_radeon_private_t *dev_priv = dev->dev_private;
	drm_radeon_buf_priv_t *buf_priv = buf->dev_private;

	buf_priv->age = ++dev_priv->sarea_priv->last_dispatch;
	buf->pending = 1;
	buf->used = 0;
}

/**
 * Parses and validates a user-supplied command buffer and emits appropriate
 * commands on the DMA ring buffer.
 * Called by the ioctl handler function radeon_cp_cmdbuf.
 */
int r300_do_cp_cmdbuf(drm_device_t *dev,
		      DRMFILE filp,
		      drm_file_t *filp_priv,
		      drm_radeon_kcmd_buffer_t *cmdbuf)
{
	drm_radeon_private_t *dev_priv = dev->dev_private;
	drm_device_dma_t *dma = dev->dma;
	drm_buf_t *buf = NULL;
	int emit_dispatch_age = 0;
	int ret = 0;

	DRM_DEBUG("\n");

	/* See the comment above r300_emit_begin3d for why this call must be here,
	 * and what the cleanup gotos are for. */
	r300_pacify(dev_priv);

	if (cmdbuf->nbox <= R300_SIMULTANEOUS_CLIPRECTS) {
		ret = r300_emit_cliprects(dev_priv, cmdbuf, 0);
		if (ret)
			goto cleanup;
	}

	while (cmdbuf->bufsz >= sizeof(drm_r300_cmd_header_t)) {
		int idx;
		drm_r300_cmd_header_t header;

		header.u = *(unsigned int *)cmdbuf->buf;

		cmdbuf->buf += sizeof(header);
		cmdbuf->bufsz -= sizeof(header);

		switch (header.header.cmd_type) {
		case R300_CMD_PACKET0:
			DRM_DEBUG("R300_CMD_PACKET0\n");
			ret = r300_emit_packet0(dev_priv, cmdbuf, header);
			if (ret) {
				DRM_ERROR("r300_emit_packet0 failed\n");
				goto cleanup;
			}
			break;

		case R300_CMD_VPU:
			DRM_DEBUG("R300_CMD_VPU\n");
			ret = r300_emit_vpu(dev_priv, cmdbuf, header);
			if (ret) {
				DRM_ERROR("r300_emit_vpu failed\n");
				goto cleanup;
			}
			break;

		case R300_CMD_PACKET3:
			DRM_DEBUG("R300_CMD_PACKET3\n");
			ret = r300_emit_packet3(dev_priv, cmdbuf, header);
			if (ret) {
				DRM_ERROR("r300_emit_packet3 failed\n");
				goto cleanup;
			}
			break;

		case R300_CMD_END3D:
			DRM_DEBUG("R300_CMD_END3D\n");
			/* TODO:
			   Ideally userspace driver should not need to issue this call,
			   i.e. the drm driver should issue it automatically and prevent
			   lockups.

			   In practice, we do not understand why this call is needed and what
			   it does (except for some vague guesses that it has to do with cache
			   coherence) and so the user space driver does it.

			   Once we are sure which uses prevent lockups the code could be moved
			   into the kernel and the userspace driver will not
			   need to use this command.

			   Note that issuing this command does not hurt anything
			   except, possibly, performance */
			r300_pacify(dev_priv);
			break;

		case R300_CMD_CP_DELAY:
			/* simple enough, we can do it here */
			DRM_DEBUG("R300_CMD_CP_DELAY\n");
			{
				int i;
				RING_LOCALS;

				BEGIN_RING(header.delay.count);
				for (i = 0; i < header.delay.count; i++)
					OUT_RING(RADEON_CP_PACKET2);
				ADVANCE_RING();
			}
			break;

		case R300_CMD_DMA_DISCARD:
			DRM_DEBUG("RADEON_CMD_DMA_DISCARD\n");
			idx = header.dma.buf_idx;
			if (idx < 0 || idx >= dma->buf_count) {
				DRM_ERROR("buffer index %d (of %d max)\n",
					  idx, dma->buf_count - 1);
				ret = DRM_ERR(EINVAL);
				goto cleanup;
			}

			buf = dma->buflist[idx];
			if (buf->filp != filp || buf->pending) {
				DRM_ERROR("bad buffer %p %p %d\n",
					  buf->filp, filp, buf->pending);
				ret = DRM_ERR(EINVAL);
				goto cleanup;
			}

			emit_dispatch_age = 1;
			r300_discard_buffer(dev, buf);
			break;

		case R300_CMD_WAIT:
			/* simple enough, we can do it here */
			DRM_DEBUG("R300_CMD_WAIT\n");
			if (header.wait.flags == 0)
				break;	/* nothing to do */

			{
				RING_LOCALS;

				BEGIN_RING(2);
				OUT_RING(CP_PACKET0(RADEON_WAIT_UNTIL, 0));
				OUT_RING((header.wait.flags & 0xf) << 14);
				ADVANCE_RING();
			}
			break;

		default:
			DRM_ERROR("bad cmd_type %i at %p\n",
				  header.header.cmd_type,
				  cmdbuf->buf - sizeof(header));
			ret = DRM_ERR(EINVAL);
			goto cleanup;
		}
	}

	DRM_DEBUG("END\n");

      cleanup:
	r300_pacify(dev_priv);

	/* We emit the vertex buffer age here, outside the pacifier "brackets"
	 * for two reasons:
	 *  (1) This may coalesce multiple age emissions into a single one and
	 *  (2) more importantly, some chips lock up hard when scratch registers
	 *      are written inside the pacifier bracket.
	 */
	if (emit_dispatch_age) {
		RING_LOCALS;

		/* Emit the vertex buffer age */
		BEGIN_RING(2);
		RADEON_DISPATCH_AGE(dev_priv->sarea_priv->last_dispatch);
		ADVANCE_RING();
	}

	COMMIT_RING();

	return ret;
}