| Age | Commit message (Collapse) | Author | |
|---|---|---|---|
| 2008-04-26 | Enum-ectomy of vblank modesetting ioctl | Jesse Barnes | |
| Enum can be of pretty much any size since C leaves the choice of size up to the implementation. So avoid using it in new interfaces like the vblank pre- & post-modeset ioctl. Thanks to hch for spotting this. | |||
| 2008-04-23 | Add pread/pwrite ioctls to mmfs. | Eric Anholt | |
| 2008-04-23 | Extend the mmfs basic test to do a couple of ioctls. | Eric Anholt | |
| 2008-04-23 | Move mmfs.h userland interface to shared-core. | Eric Anholt | |
| 2008-04-23 | Make radeon_ms compile. | Kristian Høgsberg | |
| Remove lock functions and use pci_map_rom() instead of pci_map_rom_copy(). | |||
| 2008-04-23 | i915: fix for compatibility mode | Xiang, Haihao | |
| 2008-04-22 | i915: allocate devname at init time | Jesse Barnes | |
| Since it'll be freed at unload time, we should alloc devname rather than pointing to the DRIVER_NAME string. | |||
| 2008-04-22 | clear interrupt status before install irq | Hong Liu | |
| On my 865G machine, it seems the CPU will receive interrupt before irq_postinstall is called. This will cause kernel oops because vblank is not inited at that time. Clear interrupt status before install seems fixing this problem. Signed-off-by: Hong Liu <hong.liu@intel.com> | |||
| 2008-04-22 | i915: gfx hw and i945gme fixes from upstream | Dave Airlie | |
| From Jesse and Zhenyu originally. | |||
| 2008-04-20 | [I915] Handle tiled buffers in vblank tasklet | Keith Packard | |
| The vblank tasklet update code must build 2D blt commands with the appropriate tiled flags. | |||
| 2008-04-20 | On I965, use correct 3DSTATE_DRAWING_RECTANGLE command in vblank | Keith Packard | |
| The batchbuffer submission paths were fixed to use the 965-specific command, but the vblank tasklet was not. When the older version is sent, the 965 will lock up. | |||
| 2008-04-17 | Porting DVO stuff | Hong Liu | |
| Ported from Xorg intel 2d driver. Changed interfaces definitions, which needed to be changed later if other device wants to use these DVO stuff. | |||
| 2008-04-11 | Save and restore dsparb and d_state regs | Keith Packard | |
| 2008-04-12 | Merge branch 'modesetting-101' of ssh://git.freedesktop.org/git/mesa/drm ↵ | Jerome Glisse | |
| into modesetting-101 | |||
| 2008-04-12 | radeon_ms: rework command submission ioctl & cleanup | Jerome Glisse | |
| 2008-04-09 | Add TV out hotplug detection | Jesse Barnes | |
| Doesn't yet work on my i915 test machine, but most of the necessary bits should be there. | |||
| 2008-04-08 | Merge branch 'modesetting-101' of ssh://git.freedesktop.org/git/mesa/drm ↵ | Jesse Barnes | |
| into modesetting-101 | |||
| 2008-04-08 | Add devname in modeset case | Jesse Barnes | |
| If the driver is 'modeset' enabled, it'll register it's interrupt handler at load time. Set the devname in this case so that /proc/interrupts makes sense. | |||
| 2008-04-08 | radeon_ms: command buffer validation use array of function pointer | Jerome Glisse | |
| 2008-04-06 | radeon_ms: fix framebuffer code | Jerome Glisse | |
| 2008-04-06 | radeon_ms: check for NULL fb | Jerome Glisse | |
| 2008-04-05 | nv50: primitive i2c interrupt handler | Maarten Maathuis | |
| 2008-04-03 | radeon_ms: add crtc set base callback & fix palette | Jerome Glisse | |
| 2008-04-03 | nv50: primitive display interrupt handler. | Maarten Maathuis | |
| 2008-03-31 | radeon_ms: small fix & cleanup to command checking | Jerome Glisse | |
| 2008-03-31 | nouveau: fix return from function.. | Dave Airlie | |
| dude kernel moduless use kernel errors :) this fixes an oops on init when this codepath hits. | |||
| 2008-03-31 | radeon_ms: initial pass at command buffer validation | Jerome Glisse | |
| 2008-03-30 | nouveau: forgot to add a break | Maarten Maathuis | |
| 2008-03-30 | nouveau: Add ctx values for nv86. | Maarten Maathuis | |
| - Note that this may not work for all nv86. | |||
| 2008-03-30 | radeon_ms: add hang debuging helper functions | Jerome Glisse | |
| 2008-03-30 | drm/r300: fix wait interface mixup | Dave Airlie | |
| This interface was defined completely wrong, however userspace has only ever used 4 values from it (0x1, 0x2, 0x3 and 0x6), so fix the interface to do what userspace actually expected but define new defines for new users to use it properly. | |||
| 2008-03-29 | r300: Correctly translate the value for the R300_CMD_WAIT command. | Oliver McFadden | |
| Previously, the R300_CMD_WAIT command would write the passed directly to the hardware. However this is incorrect because the R300_WAIT_* values used are internal interface values that do not map directly to the hardware. The new function I have added translates the R300_WAIT_* values into appropriate values for the hardware before writing the register. Thanks to John Bridgman for pointing this out. :-) | |||
| 2008-03-27 | radeon_ms: this is a modesetting driver, bring things up to date | Jerome Glisse | |
| 2008-03-25 | nouveau: nv20 bios does not initialise PTIMER | Stuart Bennett | |
| The wait functions depend on PTIMER, so write the old (incorrect, but working) values for uninitialised hw | |||
| 2008-03-24 | i915: fix oops on agp=off | Dave Airlie | |
| Kernel bug 10289. | |||
| 2008-03-24 | Merge branch 'r500-fp' | Dave Airlie | |
| 2008-03-24 | nv40: voodoo - not quite. | Ben Skeggs | |
| 2008-03-24 | nv40: allocate massive amount of PRAMIN for grctx on all chipsets. | Ben Skeggs | |
| More or less a workaround for issues on some chipsets where a context switch results in critical data in PRAMIN being overwritten by the GPU. The correct fix is known, but may take some time before it's a feasible option. | |||
| 2008-03-21 | r500: fragment program upload is also used to upload constants. | Dave Airlie | |
| Limit frag address to 8 bits | |||
| 2008-03-20 | Merge branch 'modesetting-101' of ssh://git.freedesktop.org/git/mesa/drm ↵ | Jerome Glisse | |
| into modesetting-101 | |||
| 2008-03-20 | radeon_ms: fix fence | Jerome Glisse | |
| 2008-03-20 | drm: fixup r500fp submission | Dave Airlie | |
| 2008-03-20 | nouveau: do not set on-board timer's numerator/denominator to bad values | Stuart Bennett | |
| 2008-03-19 | RADEON: switch over to new production microcode | Alex Deucher | |
| This needs to be tested thoroughly before pushing to the kernel. | |||
| 2008-03-19 | RADEON: production microcode for all radeons, r1xx-r6xx | Alex Deucher | |
| This updated microcode is not in use yet. | |||
| 2008-03-19 | move some more r300 regs into not allowed on r500 | Dave Airlie | |
| 2008-03-18 | drm: add new rs690 pci id | Dave Airlie | |
| 2008-03-17 | drm: add master set/drop protocol | Dave Airlie | |
| this may not survive long - just need something for testing | |||
| 2008-03-17 | i915: safety check the sarea map still exists | Dave Airlie | |
| 2008-03-17 | initial r500 RS and FP register and upload code | Dave Airlie | |
 |
index : renesas/drm.git | |
| libdrm, cloned from git://anongit.freedesktop.org/mesa/drm | Laurent Pinchart |
| summaryrefslogtreecommitdiff |
path: root/shared-core