| Age | Commit message (Collapse) | Author | |
|---|---|---|---|
| 2008-05-09 | fixup i915 workqueue handling when modeset=1 | Hong Liu | |
| Fixup workqueue creation error handling and make sure we destroy the queue on unload. | |||
| 2008-05-09 | i915: add basic VBT support | Jesse Barnes | |
| Map the VBIOS (and therefore VBT) at init time for use by various output initialization routines. | |||
| 2008-05-08 | i915: Changed intel_fb to use the new drm_crtc_set_config interface | Jakob Bornecrantz | |
| 2008-05-08 | Revert "i915: fix vbl swap for multi-master" | Dave Airlie | |
| This reverts commit 2a78ad22647933aa8842d534bce6495ff93fbf76. | |||
| 2008-05-08 | i915: fix vbl swap for multi-master | Dave Airlie | |
| patch from F9 tree | |||
| 2008-05-08 | drm_mode: initial replacefb implemenation | Dave Airlie | |
| 2008-05-08 | Merge remote branch 'origin/master' into modesetting-101 | Dave Airlie | |
| Conflicts: linux-core/Makefile.kernel shared-core/i915_drv.h | |||
| 2008-05-05 | r500: add allowed range for us config/pixsize | Dave Airlie | |
| 2008-05-02 | nv50: enable 0x400500 bit 0 after PGRAPH exception also | Ben Skeggs | |
| No solid idea about what these 2 bits do, but nv50 can now survive a few PGRAPH exceptions just as nv40 does :) | |||
| 2008-05-02 | nouveau: guard against channels potentially not having a context, fix nv50 | Ben Skeggs | |
| 2008-05-02 | nouveau: disable all card interrupts when unknown PFIFO IRQ occurs. | Ben Skeggs | |
| This is possibly temporary. I can trigger an unending IRQ storm on G8x in some circumstances, and have no idea how to handle that particular PFIFO exception correctly yet. | |||
| 2008-05-02 | nouveau: restore original NV_PFIFO_CACHES_REASSIGN value in fifo handler | Ben Skeggs | |
| Doesn't fix any issue I've seen, but is a potential issue if a FIFO IRQ occurs during channel creation/takedown. | |||
| 2008-05-02 | nouveau: gather nsource in trap_info() | Ben Skeggs | |
| The IRQ handling stuff really is a mess.. On the TODO :) | |||
| 2008-05-02 | nv50: PGRAPH exception handling completely different from earlier chips | Ben Skeggs | |
| 2008-05-01 | nv50: I cave... Add nv84 initial context values. | Ben Skeggs | |
| I swore I'd actually do this properly and not go the horrible route we did with nv4x, but I won't get around to it just yet with so many *actually* interesting things to do first.. One day. Since someone already added nv86, why not! | |||
| 2008-04-29 | i915: fix off by one in VGA save/restore of AR & CR regs | Jesse Barnes | |
| Turns out it's important to save/restore AR14 in particular. | |||
| 2008-04-29 | nouveau: NV9x cards exist as well. | Maarten Maathuis | |
| 2008-04-28 | Merge branch 'master' into modesetting-101 | Thomas Hellstrom | |
| Conflicts: linux-core/Makefile.kernel linux-core/drm_compat.c linux-core/drm_fops.c linux-core/drm_lock.c shared-core/drm.h shared-core/i915_dma.c shared-core/i915_drv.h shared-core/i915_irq.c | |||
| 2008-04-27 | Use fixed sized types in new ioctls | Jesse Barnes | |
| Make both crtc and the command argument 32 bits to avoid any 32-on-64 compat issues. | |||
| 2008-04-26 | Enum-ectomy of vblank modesetting ioctl | Jesse Barnes | |
| Enum can be of pretty much any size since C leaves the choice of size up to the implementation. So avoid using it in new interfaces like the vblank pre- & post-modeset ioctl. Thanks to hch for spotting this. | |||
| 2008-04-23 | Make radeon_ms compile. | Kristian Høgsberg | |
| Remove lock functions and use pci_map_rom() instead of pci_map_rom_copy(). | |||
| 2008-04-23 | i915: fix for compatibility mode | Xiang, Haihao | |
| 2008-04-22 | i915: allocate devname at init time | Jesse Barnes | |
| Since it'll be freed at unload time, we should alloc devname rather than pointing to the DRIVER_NAME string. | |||
| 2008-04-22 | clear interrupt status before install irq | Hong Liu | |
| On my 865G machine, it seems the CPU will receive interrupt before irq_postinstall is called. This will cause kernel oops because vblank is not inited at that time. Clear interrupt status before install seems fixing this problem. Signed-off-by: Hong Liu <hong.liu@intel.com> | |||
| 2008-04-22 | i915: gfx hw and i945gme fixes from upstream | Dave Airlie | |
| From Jesse and Zhenyu originally. | |||
| 2008-04-20 | [I915] Handle tiled buffers in vblank tasklet | Keith Packard | |
| The vblank tasklet update code must build 2D blt commands with the appropriate tiled flags. | |||
| 2008-04-20 | On I965, use correct 3DSTATE_DRAWING_RECTANGLE command in vblank | Keith Packard | |
| The batchbuffer submission paths were fixed to use the 965-specific command, but the vblank tasklet was not. When the older version is sent, the 965 will lock up. | |||
| 2008-04-17 | Porting DVO stuff | Hong Liu | |
| Ported from Xorg intel 2d driver. Changed interfaces definitions, which needed to be changed later if other device wants to use these DVO stuff. | |||
| 2008-04-11 | Save and restore dsparb and d_state regs | Keith Packard | |
| 2008-04-12 | Merge branch 'modesetting-101' of ssh://git.freedesktop.org/git/mesa/drm ↵ | Jerome Glisse | |
| into modesetting-101 | |||
| 2008-04-12 | radeon_ms: rework command submission ioctl & cleanup | Jerome Glisse | |
| 2008-04-09 | Add TV out hotplug detection | Jesse Barnes | |
| Doesn't yet work on my i915 test machine, but most of the necessary bits should be there. | |||
| 2008-04-08 | Merge branch 'modesetting-101' of ssh://git.freedesktop.org/git/mesa/drm ↵ | Jesse Barnes | |
| into modesetting-101 | |||
| 2008-04-08 | Add devname in modeset case | Jesse Barnes | |
| If the driver is 'modeset' enabled, it'll register it's interrupt handler at load time. Set the devname in this case so that /proc/interrupts makes sense. | |||
| 2008-04-08 | radeon_ms: command buffer validation use array of function pointer | Jerome Glisse | |
| 2008-04-06 | radeon_ms: fix framebuffer code | Jerome Glisse | |
| 2008-04-06 | radeon_ms: check for NULL fb | Jerome Glisse | |
| 2008-04-05 | nv50: primitive i2c interrupt handler | Maarten Maathuis | |
| 2008-04-03 | radeon_ms: add crtc set base callback & fix palette | Jerome Glisse | |
| 2008-04-03 | nv50: primitive display interrupt handler. | Maarten Maathuis | |
| 2008-03-31 | radeon_ms: small fix & cleanup to command checking | Jerome Glisse | |
| 2008-03-31 | nouveau: fix return from function.. | Dave Airlie | |
| dude kernel moduless use kernel errors :) this fixes an oops on init when this codepath hits. | |||
| 2008-03-31 | radeon_ms: initial pass at command buffer validation | Jerome Glisse | |
| 2008-03-30 | nouveau: forgot to add a break | Maarten Maathuis | |
| 2008-03-30 | nouveau: Add ctx values for nv86. | Maarten Maathuis | |
| - Note that this may not work for all nv86. | |||
| 2008-03-30 | radeon_ms: add hang debuging helper functions | Jerome Glisse | |
| 2008-03-30 | drm/r300: fix wait interface mixup | Dave Airlie | |
| This interface was defined completely wrong, however userspace has only ever used 4 values from it (0x1, 0x2, 0x3 and 0x6), so fix the interface to do what userspace actually expected but define new defines for new users to use it properly. | |||
| 2008-03-29 | r300: Correctly translate the value for the R300_CMD_WAIT command. | Oliver McFadden | |
| Previously, the R300_CMD_WAIT command would write the passed directly to the hardware. However this is incorrect because the R300_WAIT_* values used are internal interface values that do not map directly to the hardware. The new function I have added translates the R300_WAIT_* values into appropriate values for the hardware before writing the register. Thanks to John Bridgman for pointing this out. :-) | |||
| 2008-03-27 | radeon_ms: this is a modesetting driver, bring things up to date | Jerome Glisse | |
| 2008-03-25 | nouveau: nv20 bios does not initialise PTIMER | Stuart Bennett | |
| The wait functions depend on PTIMER, so write the old (incorrect, but working) values for uninitialised hw | |||
 |
index : renesas/drm.git | |
| libdrm, cloned from git://anongit.freedesktop.org/mesa/drm | Laurent Pinchart |
| summaryrefslogtreecommitdiff |
path: root/shared-core