| Age | Commit message (Collapse) | Author |
|---|
|
|
|
Ensure NV_PFIFO_DMA_TIMESLICE_TIMEOUT_ENABLE gets set, otherwise channels
will appear to "freeze" in some circumstances.
|
|
|
|
init after irq_postinstall)
|
|
|
|
If your card doesn't have working context switching, it is now broken.
|
|
1. DRM_NOUVEAU_GPUOBJ_FREE
Used to free GPU objects. The obvious usage case is for Gr objects,
but notifiers can also be destroyed in the same way.
GPU objects gain a destructor method and private data fields with
this change, so other specialised cases (like notifiers) can be
implemented on top of gpuobjs.
2. DRM_NOUVEAU_CHANNEL_FREE
3. DRM_NOUVEAU_CARD_INIT
Ideally we'd do init during module load, but this isn't currently
possible. Doing init during firstopen() is bad as X has a love of
opening/closing the DRM many times during startup. Once the
modesetting-101 branch is merged this can go away.
IRQs are enabled in nouveau_card_init() now, rather than having the
X server call drmCtlInstHandler(). We'll need this for when we give
the kernel module its own channel.
4. DRM_NOUVEAU_GETPARAM
Add CHIPSET_ID value, which will return the chipset id derived
from NV_PMC_BOOT_0.
4. Use list_* in a few places, rather than home-brewed stuff.
|
|
|
|
The data is now in kernel space, copied in/out as appropriate according to the
This results in DRM_COPY_{TO,FROM}_USER going away, and error paths to deal
with those failures. This also means that XFree86 4.2.0 support for i810 DRM
is lost.
|
|
As a fallout, replace filp storage with file_priv storage for "unique
identifier of a client" all over the DRM. There is a 1:1 mapping, so this
should be a noop. This could be a minor performance improvement, as everything
on Linux dereferenced filp to get file_priv anyway, while only the mmap ioctls
went the other direction.
|
|
This was used to make all ioctl handlers return -errno on linux and errno on
*BSD. Instead, just return -errno in shared code, and flip sign on return from
shared code to *BSD code.
|
|
Following my nv28 kmmio dumps, nouveau_wait_for_idle() is modified to
read PTIMER and NV03_PMC_ENABLE. Also a timeout based on PTIMER value is
added, so wait_for_idle() cannot stall indefinitely (unless PTIMER is
halted). The timeout was selected as 1 giga-ticks, which for me is 1s.
|
|
This is not called from anywhere, yet.
|
|
Actually a NV04-NV50 ttm backend for both PCI and PCIEGART, but PCIGART
support for G8X using the current mm has been hacked on top of it.
|
|
|
|
probably still have a problem
|
|
|
|
Turns out lastclose() gets called even if firstopen() has never been...
|
|
Should be OK on G84 for a single channel, multiple channels *almost* work.
Untested on G80.
|
|
Allows multiple references to a single object, needed to support PCI(E)GART
scatter-gather DMA objects which would quickly fill PRAMIN if each channel
had its own.
Handle per-channel private instmem areas. This is needed to support NV50,
but might be something we want to do on earlier chipsets at some point?
Everything that touches PRAMIN is a GPU object.
|
|
Can't use nv04 code for them, since an extra field was inserted into
RAMFC after DMA_PUT/GET.
|
|
|
|
|
|
For various reasons, this ioctl was a bad idea.
At channel creation we now automatically create DMA objects covering
available VRAM and GART memory, where the client used to do this themselves.
However, there is still a need to be able to create DMA objects pointing at
specific areas of memory (ie. notifiers). Each channel is now allocated a
small amount of memory from which a client can suballocate things (such as
notifiers), and have a DMA object created which covers the suballocated area.
The NOTIFIER_ALLOC ioctl exposes this functionality.
|
|
NV04/NV10 load_context()/save_context() are stubs. I don't know enough about
how they work to implement them sanely. The "old" context_switch() code
remains hooked up, so it shouldn't break anything.
NV20 will probably break if load_context() works. No inital context values
are filled in, so when the first channel is created PGRAPH will probably end
up having its state zeroed. Some setup from nv20_graph_init() will probably
need to be moved to the per-channel context setup.
|
|
|
|
Earlier NV1X chips use the NV04 code, see previous commits about NV10 RAMFC
entry size.
|
|
|
|
|
|
|
|
|
|
The PGRAPH init for the various cards will need cleaning up at some point,
a lot of the values written there are per-context state left over from the
all the hardcoding done in the ddx.
It's possible some cards get broken by this commit, let me know.
Tested on: NV5, NV18, NV28, NV35, NV40, NV4E
|
|
|
|
graphics objects:
- No longer takes flags/dmaobj parameters, requires some major changes
to the ddx to setup the object through the FIFO. This change is
likely to cause breakages on some cards (tested on NV05,NV28,NV35,
NV40 and NV4E).
dma objects:
- now takes a "class" parameter, not really used yet but we may need
it at some point.
- parameters are checked, so clients can't randomly create DMA objects
pointing at whatever they feel like.
misc:
- Added FB_SIZE/AGP_SIZE getparams
- Read PFIFO_INTR in PFIFO irq handler, not PMC_INTR
- Dump PGRAPH trap info on PGRAPH_INTR_NOTIFY if NSOURCE isn't
NOTIFICATION_PENDING.
|
|
|
|
|
|
|
|
Hook into nv20 pgraph switching functions (they're identical for nv3x).
Actually call nv30_pgraph_context_init so the ctx_table is allocated.
Thanks to Carlos Martin for the help.
|
|
Untested...
|
|
It is still not working, but now we could use some 3D commands
without needed to run nvidia blob before.
|
|
This happens on my NV43 PPC
|
|
|
|
|
|
|
|
|
|
Now I can get 3D + working grctx switching on my NV40 without
the binary driver initialising the card first. However, this
change also breaks 3D on my C51 even *with* the binary driver's
help. So, it's likely that the weird voodoo is card-specific.
|
|
Add getparams for AGP and FB physical adresses.
Fix the MEM_ALLOC issue properly.
Fix context switches for nv44.
Change the DRM version to 0.0.1.
|
|
|
|
This will make it easier to support extra RAMIN in vram at a later point.
|
|
- Do important card init in firstopen
- Give each channel it's own cmdbuf dma object
- Move RAMHT config state to the same place as RAMRO/RAMFC
- Make sure instance mem for objects is *after* RAM{FC,HT,RO}
|
