| Age | Commit message (Collapse) | Author |
|---|
|
Can't use nv04 code for them, since an extra field was inserted into
RAMFC after DMA_PUT/GET.
|
|
|
|
|
|
For various reasons, this ioctl was a bad idea.
At channel creation we now automatically create DMA objects covering
available VRAM and GART memory, where the client used to do this themselves.
However, there is still a need to be able to create DMA objects pointing at
specific areas of memory (ie. notifiers). Each channel is now allocated a
small amount of memory from which a client can suballocate things (such as
notifiers), and have a DMA object created which covers the suballocated area.
The NOTIFIER_ALLOC ioctl exposes this functionality.
|
|
NV04/NV10 load_context()/save_context() are stubs. I don't know enough about
how they work to implement them sanely. The "old" context_switch() code
remains hooked up, so it shouldn't break anything.
NV20 will probably break if load_context() works. No inital context values
are filled in, so when the first channel is created PGRAPH will probably end
up having its state zeroed. Some setup from nv20_graph_init() will probably
need to be moved to the per-channel context setup.
|
|
|
|
Earlier NV1X chips use the NV04 code, see previous commits about NV10 RAMFC
entry size.
|
|
|
|
|
|
|
|
|
|
The PGRAPH init for the various cards will need cleaning up at some point,
a lot of the values written there are per-context state left over from the
all the hardcoding done in the ddx.
It's possible some cards get broken by this commit, let me know.
Tested on: NV5, NV18, NV28, NV35, NV40, NV4E
|
|
|
|
graphics objects:
- No longer takes flags/dmaobj parameters, requires some major changes
to the ddx to setup the object through the FIFO. This change is
likely to cause breakages on some cards (tested on NV05,NV28,NV35,
NV40 and NV4E).
dma objects:
- now takes a "class" parameter, not really used yet but we may need
it at some point.
- parameters are checked, so clients can't randomly create DMA objects
pointing at whatever they feel like.
misc:
- Added FB_SIZE/AGP_SIZE getparams
- Read PFIFO_INTR in PFIFO irq handler, not PMC_INTR
- Dump PGRAPH trap info on PGRAPH_INTR_NOTIFY if NSOURCE isn't
NOTIFICATION_PENDING.
|
|
|
|
|
|
|
|
Hook into nv20 pgraph switching functions (they're identical for nv3x).
Actually call nv30_pgraph_context_init so the ctx_table is allocated.
Thanks to Carlos Martin for the help.
|
|
Untested...
|
|
It is still not working, but now we could use some 3D commands
without needed to run nvidia blob before.
|
|
This happens on my NV43 PPC
|
|
|
|
|
|
|
|
|
|
Now I can get 3D + working grctx switching on my NV40 without
the binary driver initialising the card first. However, this
change also breaks 3D on my C51 even *with* the binary driver's
help. So, it's likely that the weird voodoo is card-specific.
|
|
Add getparams for AGP and FB physical adresses.
Fix the MEM_ALLOC issue properly.
Fix context switches for nv44.
Change the DRM version to 0.0.1.
|
|
|
|
This will make it easier to support extra RAMIN in vram at a later point.
|
|
- Do important card init in firstopen
- Give each channel it's own cmdbuf dma object
- Move RAMHT config state to the same place as RAMRO/RAMFC
- Make sure instance mem for objects is *after* RAM{FC,HT,RO}
|
|
|
|
|
|
Added preliminary support for context switches (triggers the interrupts, but hangs after the switch ; something's not quite right yet).
Removed the PFIFO_REINIT ioctl. I hope it's that a good idea...
Requires the upcoming commit to the DDX.
|
|
of other fixes.
- Mark the correct RAMIN slots as free (oops)
- Remove a VRAM alloc that shouldn't have been there (oops)
- Move HT init out of firstopen() and into dma_init()
- Setup PFIFO_RAM{HT,FC,RO} in pfifo_init()
|
|
|
|
|
|
|
|
|
