summaryrefslogtreecommitdiff
path: root/shared-core/nouveau_fifo.c
AgeCommit message (Collapse)Author
2007-02-28nouveau: intrusive drm interface changesBen Skeggs
graphics objects: - No longer takes flags/dmaobj parameters, requires some major changes to the ddx to setup the object through the FIFO. This change is likely to cause breakages on some cards (tested on NV05,NV28,NV35, NV40 and NV4E). dma objects: - now takes a "class" parameter, not really used yet but we may need it at some point. - parameters are checked, so clients can't randomly create DMA objects pointing at whatever they feel like. misc: - Added FB_SIZE/AGP_SIZE getparams - Read PFIFO_INTR in PFIFO irq handler, not PMC_INTR - Dump PGRAPH trap info on PGRAPH_INTR_NOTIFY if NSOURCE isn't NOTIFICATION_PENDING.
2007-02-14nouveau: fix the build on big endian (thanks CyberFoxx)Stephane Marchesin
2007-02-06nouveau: more work on the nv04 context switch code.Stephane Marchesin
2007-02-03nouveau: and of course, I was missing the last nv04 piece.Stephane Marchesin
2007-02-03nouveau: rename registers to their proper names.Stephane Marchesin
2007-01-25nouveau: simplify and fix BIG_ENDIAN flagsPatrice Mandin
2007-01-18nouveau: Remove write to CTX_SIZE. This gives us proper nv3x PGRAPH switching.Jeremy Kolb
2007-01-17nouveau: Try to get nv35 pgraph switching working. Doesn't quite yet.Jeremy Kolb
Hook into nv20 pgraph switching functions (they're identical for nv3x). Actually call nv30_pgraph_context_init so the ctx_table is allocated. Thanks to Carlos Martin for the help.
2007-01-13nouveau: nv20 graph ctx switch.Matthieu Castet
Untested...
2007-01-13nouveau: first step to make graph ctx worksMatthieu Castet
It is still not working, but now we could use some 3D commands without needed to run nvidia blob before.
2007-01-12nouveau : remove useless init : we clear RAMIN beforeMatthieu Castet
2007-01-12nouveau: get nv30 context switching to work.Jeremy Kolb
* Pulled in some registers from nv10reg.h. Needed for context switching. * Filled in nv30 graphics context (based on nv40_graph.c). * Figure out nv30 context table, set up on context creation. Allows the cards automatic switching to work.
2007-01-08nouveau: avoid allocating vram that's used as instance memory.Ben Skeggs
2007-01-05Merge branch 'master' of git+ssh://matc@git.freedesktop.org/git/mesa/drm/Matthieu Castet
2007-01-05Add basic pgraph context for nv10.Matthieu Castet
It only fake a context switch : pgraph state are not save/restored.
2007-01-05Cleanup the nv04 fifo code a bit.Stephane Marchesin
2007-01-02nouveau: oops, forgot to free RAMIN..Ben Skeggs
2007-01-02nouveau: Hook up grctx code for NV4x.Ben Skeggs
This is enough to get grctx switching going on my NV40 and C51 after the binary driver has initialised the card first. Bumping the drm patchlevel because the ddx needs some modifications to have NV4x work at all with these changes.
2007-01-02nouveau: Only clobber PFIFO if no channels are already alloc'dBen Skeggs
With this change the GPU is responsible for doing the channel switch itself. This is needed for the upcoming NV4x PGRAPH context work as we don't yet know enough to manually swap PGRAPH contexts.
2006-12-26nouveau: Alloc cmdbuf for each channel individuallyBen Skeggs
2006-12-21nouveau: save/restore endianness flag on FIFO switchBen Skeggs
This makes my G5 survive glxinfo and nouveau_demo - airlied
2006-12-12Port remaining NV4 RAMIN access from the ddx into the drm.Ben Skeggs
Should fix lockups seen on NV4 cards.
2006-12-03Merge the pciid work.Stephane Marchesin
Add getparams for AGP and FB physical adresses. Fix the MEM_ALLOC issue properly. Fix context switches for nv44. Change the DRM version to 0.0.1.
2006-11-30Use nouveau_mem.c to allocate RAMIN.Ben Skeggs
2006-11-30Wrap access to objects in RAMIN.Ben Skeggs
This will make it easier to support extra RAMIN in vram at a later point.
2006-11-28For nv10, bit 16 of RAMFC need to be set for 64 bytes fifo context.Matthieu Castet
When cleaning a fifo, we shouldn't assume everybody use nv40 ;) Fill DMA_SUBROUTINE fill correct value.
2006-11-18Only return FIFO number if the FIFO is marked as in use..Ben Skeggs
2006-11-18Check some return vals, fixes a couple of oopses.Ben Skeggs
2006-11-17Dump some useful info when a PGRAPH error occurs.Ben Skeggs
The "channel" detect doesn't work on my nv40, but the rest seems to produce sane info.
2006-11-14Completely untested NV10/20/30 FIFO context switching changes.Ben Skeggs
2006-11-14Restructure initialisation a bit.Ben Skeggs
- Do important card init in firstopen - Give each channel it's own cmdbuf dma object - Move RAMHT config state to the same place as RAMRO/RAMFC - Make sure instance mem for objects is *after* RAM{FC,HT,RO}
2006-11-14Hack around yet another "X restart borkage without nouveau.ko reload" problem.Ben Skeggs
On X init, PFIFO and PGRAPH are reset to defaults. This causes the GPU to loose the configuration done by the drm. Perhaps a CARD_INIT ioctl a proper solution to having this problem again in the future..
2006-11-06fixup fifo size so it is page alignedDave Airlie
2006-10-18Remove hack which delays activation of a additional channel. The previously ↵Ben Skeggs
active channel's state is saved to RAMFC before PFIFO gets clobbered.
2006-10-17NV40: *Now* fifo ctx switching works for me..Ben Skeggs
Ok, I lied before.. it was a fluke it worked and required magic to repeat it.. It actually helps to fill in RAMFC entries in the correct place. The code also clears RAMIN entirely instead of just the hash-table.
2006-10-17NV40: FIFO context switching now WorksForMe(tm)Ben Skeggs
2006-10-17Setup NV40 RAMFC (in wrong location.. but anyway), rearrange the RAMFC setup ↵Ben Skeggs
code a bit.
2006-10-14Again more work on context switches. They work, sometimes. And when they do ↵Stephane Marchesin
they seem to screw up the PGRAPH state.
2006-10-14Add the missing breaks.Stephane Marchesin
2006-10-13Fix the fifo context size on nv10, nv20 and nv30.Stephane Marchesin
2006-10-14Fix some randomness in activating a second channel on NV40 (odd GET/PUT ↵Ben Skeggs
vals). Ch 1 GET now advances, but no ctx_switch.
2006-10-12Still more work on the context switching code.Stephane Marchesin
2006-10-12More work on the context switch code. Still doesn't work. I'm mostly ↵Stephane Marchesin
convinced it's an initialization issue.
2006-10-11Context switching work.Stephane Marchesin
Added preliminary support for context switches (triggers the interrupts, but hangs after the switch ; something's not quite right yet). Removed the PFIFO_REINIT ioctl. I hope it's that a good idea... Requires the upcoming commit to the DDX.
2006-09-07Fix second start of X server without module reload beforehand, and a couple ↵Ben Skeggs
of other fixes. - Mark the correct RAMIN slots as free (oops) - Remove a VRAM alloc that shouldn't have been there (oops) - Move HT init out of firstopen() and into dma_init() - Setup PFIFO_RAM{HT,FC,RO} in pfifo_init()
2006-09-03Allow cmdbuf location(AGP,VRAM) and size to be configured.Ben Skeggs
2006-08-30Add stub {get,set}param ioctls.Ben Skeggs
2006-08-27initial import of nouveau code from nouveau CVSDave Airlie