summaryrefslogtreecommitdiff
path: root/shared-core/i915_irq.c
AgeCommit message (Collapse)Author
2009-02-24i915: A few whitespace cleanups.Robert Noland
2009-02-24i915: This was part of a sync to the intel driver at some pointRobert Noland
-Remove the old TTM interface -Move register definitions to i915_reg.h -Rework the irq handler
2009-02-23i915: Rip out the use of vblank_swapRobert Noland
2008-12-10Revert "Merge branch 'modesetting-gem'"Jesse Barnes
This reverts commit 6656db10551bbb8770dd945b6d81d5138521f208. We really just want the libdrm and ioctl bits, not all the driver stuff.
2008-11-13Merge branch 'master' into modesetting-gemJesse Barnes
Conflicts: libdrm/Makefile.am libdrm/intel/intel_bufmgr.h libdrm/intel/intel_bufmgr_fake.c libdrm/intel/intel_bufmgr_gem.c shared-core/drm.h shared-core/i915_dma.c shared-core/i915_irq.c shared-core/radeon_cp.c shared-core/radeon_drv.h
2008-10-09i915: Cleanup interrupt handlingRobert Noland
2008-09-30Merge remote branch 'origin/master' into modesetting-gemDave Airlie
Conflicts: libdrm/Makefile.am libdrm/dri_bufmgr.h linux-core/drm_irq.c linux-core/drm_sysfs.c linux-core/drm_ttm.c shared-core/i915_dma.c shared-core/i915_irq.c shared-core/nouveau_drv.h shared-core/radeon_cp.c
2008-08-24i915: Fix i915 build on FreeBSDRobert Noland
ifdef out all the gem stuff for now. Also, the msi stuff isn't portable the way it is... I'll try and fix that up sometime soon.
2008-08-24i915: Convert vblank on disabled pipe DRM_ERROR to DRM_DEBUG.Robert Noland
2008-08-24i915: Move spinlock init / destroy to load / unload time.Robert Noland
This resolves the panic on FreeBSD during VT switch, without attempting any of the more lofty goals for the time being.
2008-08-16i915: finish removing TTM bitsJesse Barnes
Makes it build again.
2008-08-13Merge branch 'master' into modesetting-gemJesse Barnes
Conflicts: libdrm/Makefile.am libdrm/xf86drm.h shared-core/i915_dma.c shared-core/i915_irq.c
2008-08-08Merge branch 'drm-gem'Eric Anholt
Conflicts: shared-core/i915_dma.c This brings in kernel support and userland interface for intel GEM.
2008-08-07Make modesetting-gem build with recent kernelsJesse Barnes
Needed to merge in VM fault changes & pci_read_base API update.
2008-08-01Merge commit 'origin/drm-gem' into modesetting-gemKristian Høgsberg
Conflicts: linux-core/Makefile.kernel linux-core/drmP.h linux-core/drm_mm.c linux-core/drm_stub.c linux-core/i915_gem.c linux-core/i915_opregion.c shared-core/i915_dma.c shared-core/i915_drv.h shared-core/i915_irq.c
2008-08-01Revert "i915: Move all of the irq install/uninstall to load time."Dave Airlie
This reverts commit 965a72202b439068e62ac341990f51953457b202. Please re-do over properly
2008-07-31Merge commit 'origin/master' into modesetting-gemKristian Høgsberg
Conflicts: linux-core/Makefile.kernel linux-core/ati_pcigart.c linux-core/drm_compat.h linux-core/drm_irq.c linux-core/drm_lock.c linux-core/i915_drv.c shared-core/i915_dma.c shared-core/i915_drv.h shared-core/i915_irq.c shared-core/nouveau_mem.c shared-core/radeon_cp.c shared-core/radeon_drv.h
2008-07-30i915: more version checksDave Airlie
2008-07-28Merge commit 'origin/master' into drm-gemEric Anholt
Conflicts: linux-core/Makefile.kernel shared-core/i915_dma.c shared-core/i915_drv.h shared-core/i915_irq.c
2008-07-23i915: Move all of the irq install/uninstall to load time.Robert Noland
This resolves a panic on FreeBSD which was caused by trying to re-initialize the swap lock. It's just much easier to initialize all of the locks at load time. It should also ensure that the vblank structures are available earlier.
2008-07-19i915: convert to using drm_vblank_get/put around vblank counter usageJesse Barnes
All interrupt off vblank count updates are done in drm_vblank_get/put now, so convert users of the vblank counter over to that interface.
2008-07-17i915: remove old broken vblank codeJesse Barnes
Remove the unused (and broken) "in vblank" code now that the core has been fixed to use a counter while interrupts are enabled. Also make the vblank pipe get/set ioctls into dumb stub functions, since with the new code we can no longer let userspace control whether vblank interrupts are enabled, or the core code will misbehave.
2008-07-15This is a modified version of Hong's patch from last month, with a fewHong Liu
modifications to make it work correctly on my test hardware (altered the backlight write function, made it enable the legacy backlight controller interrupts on mobile hardware, sorted the interrupt function so we don't get an excessive number of vblank interrupts). This lets the backlight keys on my T61 work properly, though there's a 750msec or so delay between the request and the brightness actually changing - this sounds awfully like the hardware spinning waiting for a status flag to become ready, but as far as I can tell they're all set correctly. If anyone can figure out what's wrong here, it'd be nice to know. Some of the functions are still stubs and just tell the hardware that the request was successful. These can be filled in as kernel modesetting gets integrated. I think it's worth getting this in anyway, since it's required for backlight control to work properly on some new platforms. Signed-off-by: Matthew Garrett <mjg@redhat.com>
2008-07-07Merge commit 'origin/drm-gem' into ms-gemKristian Høgsberg
Conflicts: linux-core/drmP.h linux-core/drm_drv.c linux-core/drm_stub.c linux-core/i915_drv.c linux-core/i915_gem.c shared-core/i915_drv.h shared-core/i915_irq.c
2008-07-01i915: only use tiled blits on 965+Jesse Barnes
When scheduled swaps occur, we need to blit between front & back buffers. I the buffers are tiled, we need to set the appropriate XY_SRC_COPY tile bit, only on 965 chips, since it will cause corruption on pre-965 (e.g. 945). Bug reported by and fix tested by Tomas Janousek <tomi@nomi.cz>. Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-06-24[intel] Get vblank pipe from irq_mask_reg instead of hardware enable regKeith Packard
With the interrupt enable/disable using only the mask register, it was wrong to use the enable register to detect which pipes had vblank detection turned on. Also, as we keep a local copy of the mask register around, and MSI machines smack the hardware during the interrupt handler, it is more efficient and more correct to use the local copy.
2008-06-24[intel] Create functions to enable/disable interruptsKeith Packard
This shares common code sequences for managing the interrupt register bits
2008-06-24i915: register definition & header file cleanupJesse Barnes
It would be nice if one day the DRM driver was the canonical source for register definitions and core macros. To that end, this patch cleans things up quite a bit, removing redundant definitions (some with different names referring to the same register) and generally tidying up the header file.
2008-06-21[intel] Use IMR instead of IER to pend interrupts during ISRKeith Packard
Noting that the interrupt mask register was more reliable than the interrupt enable register for managing interrupts in user_irq_on/user_irq_off, this patch replaces the remaining IER frobbing with IMR instead. The test which exposes IER related failures is: $ glxgears & glxgears & glxgears (reposition the glxgears windows away from the upper left corner) $ while :; do x11perf -rect100 -reps 800 -repeat 1; sleep 1; done & $ while :; do runoa; runet; done &
2008-06-21[intel] Count received interruptsKeith Packard
Another patch adds this to a /proc/dri file for debugging and monitoring.
2008-06-20[intel-gem] Add intel-specific /proc entries to help monitor gem operationKeith Packard
This adds gem_active, gem_flushing, gem_inactive, gem_request and gem_seqno entries to monitor gem operation and help debug issues.
2008-06-18Merge commit 'origin/drm-gem' into modesetting-gemJesse Barnes
Lots of conflicts, seems to load ok, but I'm sure some bugs snuck in. Conflicts: linux-core/drmP.h linux-core/drm_lock.c linux-core/i915_gem.c shared-core/drm.h shared-core/i915_dma.c shared-core/i915_drv.h shared-core/i915_irq.c
2008-06-13[intel] Enable MSI for i915 IRQKeith Packard
2008-06-13[intel] Restructure irq to pend all work until after iir write.Keith Packard
The interrupt identity register must be writen before any work occurs lest we drop an interrupt on the floor. This patch just shuffles code around to make sure that IIR is written as early as possible.
2008-06-13Fix i915_wait_irq in the presence of interrupt masking.Eric Anholt
In the short-circuit code for the breadcrumb already being new enough, we need to update the sarea_priv copy of the breadcrumb just as if we had waited. Otherwise userland error checking will notice that we returned too early based on its wrong information, and call wait_irq again (leading to spinning until someone else comes along and updates the sarea_priv). This bug was hidden when we had interrupt masking disabled, such as in master, since the interrupt handler would update sarea_priv.
2008-06-13[gem] Remove the interrupt handler for retiring requests.Eric Anholt
This was insufficient once we started masking interrupts to only when someone was waiting for them (and would thus retire requests themselves). It was replaced by the retire_timer.
2008-06-12Don't clear USER_INTERRUPT if we're not handling it.Eric Anholt
This fixes a regression from commit d434b64f6a760d85295e32298a9a1f3624ee1b69 which could cause us to fail to wake up for user interrupts if we lost a race.
2008-06-11Merge commit 'origin/drm-gem' into modesetting-gemJesse Barnes
Use new GEM based ring buffer initialization. Still need to init GEM & use it for framebuffer allocation etc. Conflicts: shared-core/i915_dma.c shared-core/i915_drv.h
2008-06-10[intel] Fix BUG_ON trigger in irq masking if you did on/off with irqs disabled.Eric Anholt
2008-06-10[gem] Manage the ringbuffer from the kernel in the GEM case.Eric Anholt
This requires that the X Server use the execbuf interface for buffer submission, as it no longer has direct access to the ring. This is therefore a flag day for the gem interface. This also adds enter/leavevt ioctls for use by the X Server. These would get stubbed out in a modesetting implementation, but are required while in an environment where the device's state is only managed by the DRM while X has the VT.
2008-06-10Merge commit 'origin/drm-gem' into modesetting-gemJesse Barnes
Passed the compile test; it's ready to ship. Conflicts: libdrm/Makefile.am linux-core/Makefile.kernel linux-core/drmP.h linux-core/drm_memrange.c linux-core/drm_stub.c shared-core/drm.h shared-core/i915_dma.c shared-core/i915_drv.h shared-core/i915_irq.c
2008-06-06drm/intel: make hotplug just be an eventDave Airlie
2008-05-30Merge commit 'origin/master' into drm-gemEric Anholt
Conflicts: linux-core/Makefile.kernel shared-core/i915_drv.h shared-core/nouveau_state.c
2008-05-30modesetting: the great renaming.Dave Airlie
Okay we have crtc, encoder and connectors. No more outputs exposed beyond driver internals I've broken intel tv connector stuff. Really for TV we should have one TV connector, with a sub property for the type of signal been driven over it
2008-05-30modesetting: reorganise out crtc/outputs are allocated.Dave Airlie
Use subclassing from the drivers to allocate the objects. This saves two objects being allocated for each crtc/output and generally makes exit paths cleaner.
2008-05-29modesetting: reorganise code into core and helper functions.Dave Airlie
This splits a lot of the core modesetting code out into a file of helper functions, that are only called from themselves and/or the driver. The driver gets called into more often or can call these functions from itself if it is a helper using driver. I've broken framebuffer resize doing this but I didn't like the API for that in any case.
2008-05-28Merge branch 'master' of git+ssh://git.freedesktop.org/git/mesa/drm into ↵Alan Hourihane
modesetting-101 Conflicts: shared-core/i915_dma.c shared-core/i915_drv.h
2008-05-27[FreeBSD] Add vblank-rework support and get drivers building.Robert Noland
The i915 driver now works again.
2008-05-26[i915] leave interrupts masked off when not in use.Keith Packard
The interrupt enable register cannot be used to temporarily disable interrupts, instead use the interrupt mask register. Note that this change means that a pile of buffers will be left stuck on the chip as the final interrupts will not be recognized to come and drain things.
2008-05-22[gem] Release GEM buffers from work task scheduled from IRQ.Eric Anholt
There are now 3 lists. Active is buffers currently in the ringbuffer. Flushing is not in the ringbuffer, but needs a flush before unbinding. Inactive is as before. This prevents object_free → unbind → wait_rendering → object_reference and a kernel oops about weird refcounting. This also avoids an synchronous extra flush and wait when freeing a buffer which had a write_domain set (such as a temporary rendered to and then from using the 2d engine). It will sit around on the flushing list until the appropriate flush gets emitted, or we need the GTT space for another operation.