| Age | Commit message (Collapse) | Author |
|---|
|
The existing 'offset' field is unfortunately typed as 'unsigned long',
which is unfortunately only 4 bytes with a 32-bit userspace.
Traditionally, the hardware has only supported 32-bit virtual addresses,
so even though the kernel uses a __u64, the value would always fit.
However, Broadwell supports 48-bit addressing. So with a 64-bit kernel,
the card virtual address may be too large to fit in the 'offset' field.
Ideally, we would change the type of 'offset' to be a uint64_t---but
this would break the libdrm ABI. Instead, we create a new 'offset64'
field to hold the full 64-bit value from the kernel, and store the
32-bit truncation in the existing 'offset' field, for compatibility.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Ben Widawsky <ben@bwidawsk.net>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
|
|
I've seen a number of apps spending unreasonable amounts of time in
drm_intel_bo_busy during the buffer mapping process.
We can't track idleness in general, in the case of buffers shared
across processes. But this should significantly reduce our overhead
for checking for busy on things like VBOs.
Improves (unoptimized) glamor x11perf -f8text by 0.243334% +/-
0.161498% (n=1549), which has formerly been spending about .5% of its
time hitting the kernel for drm_intel_gem_bo_busy().
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
|
|
The previous code would just use the potentially unallocated variable,
which is probably okay most of the time, but not very nice to the user
of the library.
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
|
|
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
|
|
If the application sends us a file descriptor pointing at a prime
buffer that we've already got, we have to re-use the same bo_gem
structure or chaos will result.
Track the set of all known prime objects and look to see if the kernel
has returned one of those for a new file descriptor.
Also checks for prime buffers in the flink case.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
|
|
The ioctl expects that certain fields will be zeroed, so we should allow
the helper function to actually work in non-Valgrind builds.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reported-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Reviewed-by: Damien Lespiau <damien.lespiau@intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
|
|
I would have just used the drmIoctl interface directly in Mesa, but the
ioctl needs some data from the drm_intel_context that is not exposed
outside libdrm.
This ioctl is in the drm-intel-next tree as b635991.
v2: Update based on Mika's kernel work.
v3: Fix compile failures from last-minute typos. Sigh.
v4: Import the actual changes from the kernel i915_drm.h. Only comments
on some fields of drm_i915_reset_stats differed. There are still some
deltas between the kernel i915_drm.h and the one in libdrm, but those
can be resolved in other patches.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org> [v3]
Reviewed-by: Damien Lespiau <damien.lespiau@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
|
|
This reverts commit 6335e1d28c422050024bcf4100c4fb3a5bac2afb.
No taxation without representation, in other words no userspace without kernel
stuff being in a stable location, either drm-next but I'll accept drm-intel-next
for intel specific stuff.
|
|
I would have just used the drmIoctl interface directly in Mesa, but the
ioctl needs some data from the drm_intel_context that is not exposed
outside libdrm.
v2: Update based on Mika's kernel work.
v3: Fix compile failures from last-minute typos. Sigh.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
|
|
The command now takes a 48bits address and is thus 1 dword longer.
v2 (Ben): commit message: s/byte/dword (Eric)
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
|
|
Since our aub file dumping's GTT handling is totally fake, we always put
everything in the low 4GB anyway and shouldn't ever need to set
AddressHigh to anything other than 0.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
[ben: slight commit message change]
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
|
|
[bwidawsk: Added Damien's SOB]
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
|
|
The various create and open functions set the buffer size, but
drm_intel_bo_gem_create_from_prime() is an exception. In the 3.12 kernel
we can now use lseek on the prime fd to determine the size of the bo.
Use that and override the userprovided size. If the kernel doesn't
support this, we get an error and fall back to the user provided size.
Signed-off-by: Kristian Høgsberg <krh@bitplanet.net>
|
|
Mark the address ranges as accessible with VALGRIND_MAKE_MEM_DEFINED.
Signed-off-by: Chia-I Wu <olvaffe@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
|
|
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
|
|
No need to prepare the .aub header and dump in that case, it'll be
done with the next call with true.
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
|
|
v2: Fix the test for has_vebox
Signed-off-by: Xiang, Haihao <haihao.xiang@intel.com>
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
|
|
We didn't set the ring flag for BLT batches, so they got run on the
render ring. Shenanigans ensued, especially when we sent commands that
were only valid on the BLT ring.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
|
|
As we clear the relocs from the bo, we also need to clear the
contribution of the reloc_target_bo from the fence count. Otherwise they
are leaked and prevent any further relocations being added to the bo.
|
|
Originally posted to Free Desktop bug #52549 by David Shao.
Resolves Gentoo Bug #433403.
Commit message by Richard Yao.
Reviewed-by: Richard Yao <ryao@gentoo.org>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
References: https://bugs.freedesktop.org/show_bug.cgi?id=52549
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
|
|
intel_bufmgr_gem.c: In function 'drm_intel_bo_gem_export_to_prime':
intel_bufmgr_gem.c:2477:6: warning: unused variable 'ret' [-Wunused-variable]
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
|
|
commit 92fd0ce4f659d7b0680543e9e5b96a3c7737a5f3
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date: Fri Aug 31 11:16:53 2012 +0200
intel: properly test for HAS_LLC
missed slightly and in effect had no effect on the outcome of checking
whether the kernel/chipset supported LLC.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
|
|
It's the same situation as flink and we need take the same precautions.
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Kristian Høgsberg <krh@bitplanet.net>
|
|
If the kernel supports the test, we need to check the param.
Copy&pasta from the above checks that only look at the return value.
Interesting how much one can get such a simple interface wrong.
Issue created in
commit 151cdcfe685ee280a4344dfc40e6087d74a5590f
Author: Eugeni Dodonov <eugeni.dodonov@intel.com>
Date: Tue Jan 17 15:20:19 2012 -0200
intel: query for LLC support
Patch even claims to have fixed this in v2, but is actually unchanged
from v1.
Reported-by: Xiang, Haihao <haihao.xiang@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
|
|
Otherwise pad appears uninitialized and valgrind grumbles.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
|
|
Reviewed-by: Ben Widawsky <ben@bwidawsk.net>
|
|
Otherwise we end up with X hitting a fail-loop as the embedded libGL
stacks asserts whilst initialising.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
|
|
|
|
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
|
|
This adds interfaces for the X driver to use to create a
prime handle from a buffer, and create a bo from a handle.
v2: use Chris's suggested naming (well from at least for consistency)
v3: git commit --amend fail
v4: fix as per Chris's suggestions, group assignments, add get tiling
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
|
Since there is no getparam for hardware context support, Mesa always
tries to obtain a context by calling drm_intel_gem_context_create and
NULL-checking the result. On an older kernel without context support,
this caused libdrm to print an unwanted message to stderr:
DRM_IOCTL_I915_GEM_CONTEXT_CREATE failed: Invalid argument
In fact, this caused every Piglit test to fail with a "warn" status due
to the unrecognized error message.
Change the message to use DBG() rather than fprintf(), so people can
still get the debug message, but it won't spam normally.
Reviewed-by: Ben Widawsky <ben@bwidawsk.net>
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
|
|
Add relevant code to set up minimal state and call the appropriate
kernel IOCTLs.
This was missed in the previous cherry-picking for 2.3.36.
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
|
|
To support this we extract the common execbuf2 functionality to be
called with, or without contexts.
The context'd execbuf does not support some of the dri1 stuff.
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
|
|
int drm_intel_gem_bo_wait(drm_intel_bo *bo, uint64_t timeout_ns)
This should bump the libdrm version. We're waiting for context support
so we can do both features in one bump.
v2: don't return remaining timeout amount
use get param and fallback for older kernels
v3: only doing getparam at init
prototypes now have a signed input value
v4: update comments
fall back to correct polling behavior with new userspace and old kernel
v5: since the drmIoctl patch was not well received, return appropriate
values in this function instead. As Daniel pointed out, the polling
case (timeout == 0) should also return -ETIME.
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
|
|
This patch adds a new function,
drm_intel_bufmgr_gem_set_aub_annotations(), which can be used to
annotate the type and subtype of data stored in various sections of
each buffer. This data is used to populate type and subtype fields
when generating the .aub file, which improves the ability of later
debugging tools to analyze the contents of the .aub file.
If drm_intel_bufmgr_gem_set_aub_annotations() is not called, then we
fall back to the old set of annotations (annotate the portion of the
batchbuffer that is executed as AUB_TRACE_TYPE_BATCH, and everything
else as AUB_TRACE_TYPE_NOTYPE).
Reviewed-by: Eric Anholt <eric@anholt.net>
|
|
These are more cases where valgrind doesn't understand what gets read
or written by our ioctls.
|
|
This improves the performance of Mesa's GL_MAP_UNSYNCHRONIZED_BIT path
in GL_ARB_map_buffer_range. Improves Unigine Tropics performance at
1024x768 by 2.30482% +/- 0.0492146% (n=61)
v2: Fix comment grammar.
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
|
|
drmIoctl returns -1 on error with errno set to the error value. Other
users of it in this file just check for != 0, and only use errno when
they need to send an error value on to the caller of the API.
|
|
We've been hacking these constantly.
|
|
This will allow the driver to capture all of its execution state to a
file for later debugging. intel_gpu_dump is limited in that it only
captures batchbuffers, and Mesa's captures, while more complete, still
capture only a portion of the state involved in execution.
This is a squash commit of a long series of hacking as we tried to get
the resulting traces to work in the internal simulator. It contains
contributions by Yuanhan Liu and Kenneth Graunke.
v2: Drop the MI_FLUSH_ENABLE setup.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
|
|
For example:
export INTEL_DEVID_OVERRIDE=0x162
If this variable is set, don't actually submit the batchbuffer to the
GPU, it probably contains commands for the wrong generation of hardware.
v2: Introduce a getter for the overridden devid, and avoid getenv per exec.
Reviewed-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
|
|
Every access to either the GTT or CPU pointer is supposed to be
proceeded by a set_domain ioctl so that GEM is able to manage the cache
domains correctly and for the following access to be coherent. Of
course, some people explicitly want incoherent, non-blocking access
which is going to trigger warnings by this patch but are probably better
served by explicit suppression.
v2: Also mark the pointers as inaccessible following the explicit unmap
and implicit unmap upon return to the cache.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
|
|
In particular, declare the hidden CPU mmaps to valgrind so that it knows
about those memory regions.
v2: Add an additional VG_CLEAR for the getparam
References: https://bugs.freedesktop.org/show_bug.cgi?id=35071
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Ben Widawsky <ben@bwidawsk.net>
[anholt: Ideally valgrind should just learn about the ioctls, and
removing the clear for the non-valgrindified code feels risky.]
Reviewed-by: Eric Anholt <eric@anholt.net>
|
|
This adds support for querying the kernel about the LLC support in the
hardware.
In case the ioctl fails, we assume that it is present on GEN6 and GEN7.
v2: fix the return code checking
Signed-off-by: Eugeni Dodonov <eugeni.dodonov@intel.com>
|
|
If the pci_device's actual gen was > 4, then we stupidly set
bufmgr_gem->gen = 6. Luckily this caused no bugs, and this fix shouldn't
change any behavior, because all checks against the gen currently have one
of the forms below:
gen == 2
gen == 3
gen >= 4
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Eugeni Dodonov <eugeni.dodonov@intel.com>
Signed-off-by: Chad Versace <chad.versace@linux.intel.com>
|
|
This will make these macros reusable from intel_decode.c, which
doesn't have a bufmgr_gem context, without faking the struct. We
should generally only be using these macros from bufmgr_gem context
setup anyway.
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Eugeni Dodonov <eugeni@dodonov.net>
|
|
During free we unconditionally delete the bo from the vma cache. This
relies on the its list member being kept in a sane state. This fails
after the object is purged, as the purge operation performs a pure
deletion and doesn't reset the list member, leaving a pair of dangling
pointers.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
|
|
Hopefully all the bugs in the callers have been found, so time to
handle the failures "gracefully" again.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
|
|
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
|
|
As the max number of VMA mappings is a hard per-process limit, we need
to include the number of currently active mappings when evicting in
order to make room for a new mmap.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
|
