| Age | Commit message (Collapse) | Author |
|---|
|
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
libkms only has the xrgb8888 format, so we're overallocating the bo by
quite a lot in some cases. But we still need to get the pitch from the
libkms since it's the driver that decides how to align it.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The function returns returns 0 on success or a negative value in case of an
error, except when given invalid attributes in which case it returns the
positive EINVAL value. Replace that with -EINVAL to allow the caller to detect
errors with a < 0 check.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jakob Bornecrantz <wallbraker@gmail.com>
|
|
Wrap the header in extern "C" { ... };.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jakob Bornecrantz <wallbraker@gmail.com>
|
|
Needed for RB_COPY_DEST_BASE register on a3xx.
Signed-off-by: Rob Clark <robdclark@gmail.com>
|
|
v2: Only writte tile index if flags for it is set
v3: Remove useless allow2d scanout flags
v4: Split radeon_drm.h update to its own patch
v5: update against lastest next tree for radeon
Signed-off-by: Jerome Glisse <jglisse@redhat.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
|
|
v2: sync with radeon-next tree for 3.10
http://cgit.freedesktop.org/~agd5f/linux/log/?h=drm-next-3.10-wip
Signed-off-by: Jerome Glisse <jglisse@redhat.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
|
|
It accidentally used the cmd id for the gen7 command and had an
outdated lenght field. Spotted while trying to make sense of an ivb
error_state from mesa 7.11 ...
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
|
|
The second digit was off by one, which meant we accidentally treated
GT(n) as GT(n-1). This also meant no support for GT1 at all.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
|
|
If clock_gettime did fail, it would return -1 and set errno.
What we really want to strerror() is the errno.
Signed-off-by: Daniel Kurtz <djkurtz@chromium.org>
|
|
I even compile time tested this on a panda with make dist!
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@canonical.com>
|
|
it's not even shipped in the tarball.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@canonical.com>
|
|
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@canonical.com>
|
|
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
|
|
Protect the macro argument evaluations with parens.
This is already touching most lines, so while at it, fix up all white
space to uniform style throughout the file.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
|
|
Currently single pushbuffer can take up to 80% of VRAM and 80% of GART.
As this value seems to be arbitrary (and user may need to set it differently)
this patch adds support for 2 environment variables:
NOUVEAU_LIBDRM_VRAM_LIMIT_PERCENT (default 80)
NOUVEAU_LIBDRM_GART_LIMIT_PERCENT (default 80)
which will let users override pushbuffer VRAM/GART limits.
Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com>
|
|
Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com>
|
|
fix error in previous patch
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.com>
Signed-off-by: Andreas Boll <andreas.boll.dev@gmail.com>
|
|
Install test programs is useful in cross compilation case. By default
the behavior is the same and test programs aren't installed in $bindir.
If --enable-install-test-programs is set then test programs are
installed in $bindir.
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
|
|
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This patch adds library and test application for g2d gpu(fimg2d).
The fimg2d hardware is a 2D graphics accelerator(G2D) that
supports Bit Block Transfer(BitBLT).
The library includes the following primitive drawing operations:
.solid fill - This operation fills the given buffer with
the given color data.
.copy - This operation copies contents in source buffer to
destination buffer.
.copy_with_scale - This operation copies contents in source buffer
to destination buffer scaling up or down properly.
.blend - This operation blends contents in source buffer with
the ones in destination buffer.
And the above operations uses gem handle or user space address
allocated by malloc() as source or destination buffer.
And the test application includes just simple primitive drawing
tests with the above library.
And the guide to test is as the following,
"#exynos_fimg2d_test -s connector_id@crtc_id:mode"
With this above simple command, four primitive drawing operations
would be called step by step and also rendered on the output device
to the given connector and crtc id.
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Rob Clark <robdclark@gmail.com>
|
|
Signed-off-by: Jerome Glisse <jglisse@redhat.com>
|
|
The libdrm_freedreno helper layer for use by xf86-video-freedreno,
fdre (freedreno r/e library and tests for driving gpu), and eventual
gallium driver for the Adreno GPU. This uses the msm gpu driver
from QCOM's android kernel tree.
Note that current msm kernel driver is a bit strange. It provides a
DRM interface for GEM, which is basically sufficient to have DRI2
working. But it does not provide KMS. And interface to 2d and 3d
cores is via different other devices (/dev/kgsl-*). This is not
quite how I'd write a DRM driver, but at this stage it is useful for
xf86-video-freedreno and fdre (and eventual gallium driver) to be
able to work on existing kernel driver from QCOM, to allow to
capture cmdstream dumps from the binary blob drivers without having
to reboot. So libdrm_freedreno attempts to hide most of the crazy.
The intention is that when there is a proper kernel driver, it will
be mostly just changes in libdrm_freedreno to adapt the gallium
driver and xf86-video-freedreno (ignoring the fbdev->KMS changes).
So don't look at freedreno as an example of how to write a libdrm
module or a DRM driver.. it is just an attempt to paper over a non-
standard kernel driver architecture.
v1: original
v2: hold ref's to pending bo's (because qcom's kernel driver doesn't),
various bug fixes, add ringbuffer markers so we can emit IB's to
portion of ringbuffer (so that gallium driver can use a single
ringbuffer for both tile cmds and draw cmds.
Signed-off-by: Rob Clark <robclark@freedesktop.org>
|
|
Intel GPU Tools is newer and arguably better. This change doesn't
completely merge the files because it's a bit simpler if we move the
I9XX macro over to Intel GPU Tools, and don't move over a few macros
from IGT that libdrm doesn't care about.
It has been discussed, and would seem even easier if Intel GPU Tools
simply used the libdrm header files. Whether or not we move to that,
this should help that effort.
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org>
|
|
On Gen6, bit 15 is now `Depth Clear Value Valid`. This was being treated
as part of the length, and failing the rest of the batchbuffer decode.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Signed-off-by: Chris Forbes <chrisf@ijw.co.nz>
|
|
We didn't set the ring flag for BLT batches, so they got run on the
render ring. Shenanigans ensued, especially when we sent commands that
were only valid on the BLT ring.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
|
|
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@canonical.com>
|
|
I'm fairly sure the extra flags it specifies no longer exist, so
there is no point in keeping it. It only adds a warning when
running make distcheck.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@canonical.com>
|
|
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
|
|
Due to the typo, none of the .xml files would end up in the release
tarball and cause make distcheck as well as builds from the tarball to
fail.
Using $() isn't strictly necessary but other variables and expressions
use that variant already so it makes the usage consistent.
Reviewed-by: David Herrmann <dh.herrmann@googlemail.com>
Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
|
|
Very similar to Evergreen, but slightly different rules for tile / slice
alignment. Fortunately, these map quite naturally onto the previous fixes for
linear aligned layout on SI.
2D tiling still needs more work here and possibly in the kernel.
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
|
|
This fixes all the out-of-tree build-failures with manpages and uses a
.man_fixup file to avoid overriding man-pages on every build.
Manpages are only built if xsltproc is found and the stylesheets are
available locally. You can disable building manpages with
--disable-manpages so the quite expensive xsltproc procedure can be
skipped.
Signed-off-by: David Herrmann <dh.herrmann@googlemail.com>
|
|
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@canonical.com>
|
|
|
|
v2: Take Maarten Lankhorst's suggestion of nesting the struct to prevent
sizeof() issues due to padding on older revisions.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@canonical.com>
|
|
Nouveau headers are installed in I${includedir}/libdrm.
|
|
As we clear the relocs from the bo, we also need to clear the
contribution of the reloc_target_bo from the fence count. Otherwise they
are leaked and prevent any further relocations being added to the bo.
|
|
I must have botched something in the push of the xml switchover, since I
now get errors when building the pages and aliases. Just disable for
now.
|
|
This adds an overview page that describes Dumb-Buffers, TTM and GEM. It
does not describe chipset-specific features. You should do that in the
driver-manpages.
Signed-off-by: David Herrmann <dh.herrmann@googlemail.com>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
|
|
This is an overview page for KMS. It is again targeted at novice users
that need redirection to the correct function man-pages.
Signed-off-by: David Herrmann <dh.herrmann@googlemail.com>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
|
|
The drm.xml file compiles to drm.7 and is meant as a global overview page
for libdrm. It is targeted to new users of libdrm and redirects to all
other main man-pages.
Signed-off-by: David Herrmann <dh.herrmann@googlemail.com>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
|
|
If we want to use the manpages in external documentation other than normal
manpages, we should rather use XML. Furthermore, almost no-one knows troff
today, anyway, and XML allows others to easily add more pages without
having to learn troff.
Signed-off-by: David Herrmann <dh.herrmann@googlemail.com>
|
|
Under certain circumstances it's possible for libdrm to decide to move
a GART|VRAM pushbuf to be VRAM-only. This causes the kernel to reject
the command submission on GF8 and up, due to a stricter policy where
buffers are only allowed to move to memory types that were specified
at creation time.
The simplest fix for this is to force the creation-time memory type for
the lifetime of the push buffer.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
|
|
On error fstat return -1, instead return -EINVAL to caller
Signed-off-by: Maxime Villard <rustyBSD@gmx.fr>
Signed-off-by: Jerome Glisse <jglisse@redhat.com>
|
|
Signed-off-by: Maxime Villard <rustyBSD@gmx.fr>
Signed-off-by: Jerome Glisse <jglisse@redhat.com>
|
|
To avoid kernel rejecting cs if we return different global name
for same bo keep track of global name and always return the same.
Seems to fix issue with suspend/resume failing and repeatly printing
following message :
[drm:radeon_cs_ioctl] *ERROR* Failed to parse relocation -35!
There might still be way for a rogue program to trigger this issue.
Signed-off-by: Jerome Glisse <jglisse@redhat.com>
|
|
Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
|
|
Originally posted to Free Desktop bug #52549 by David Shao.
Resolves Gentoo Bug #433403.
Commit message by Richard Yao.
Reviewed-by: Richard Yao <ryao@gentoo.org>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
References: https://bugs.freedesktop.org/show_bug.cgi?id=52549
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
|
