i915: register definition & header file cleanup

It would be nice if one day the DRM driver was the canonical source for
register definitions and core macros.  To that end, this patch cleans things up
quite a bit, removing redundant definitions (some with different names
referring to the same register) and generally tidying up the header file.

1 files changed, 1145 insertions, 646 deletions

diff --git a/shared-core/i915_drv.h b/shared-core/i915_drv.h
index 32e90d29..3ba74db8 100644
--- a/shared-core/i915_drv.h
+++ b/shared-core/i915_drv.h
@@ -67,6 +67,11 @@
 #endif
 #define DRIVER_PATCHLEVEL	0
 
+enum pipe {
+    PIPE_A = 0,
+    PIPE_B,
+};
+
 #ifdef I915_HAVE_BUFFER
 #define I915_MAX_VALIDATE_BUFFERS 4096
 struct drm_i915_validate_buffer;
@@ -177,7 +182,7 @@ typedef struct drm_i915_private {
 	u32 saveDSPASTRIDE;
 	u32 saveDSPASIZE;
 	u32 saveDSPAPOS;
-	u32 saveDSPABASE;
+	u32 saveDSPAADDR;
 	u32 saveDSPASURF;
 	u32 saveDSPATILEOFF;
 	u32 savePFIT_PGM_RATIOS;
@@ -198,24 +203,24 @@ typedef struct drm_i915_private {
 	u32 saveDSPBSTRIDE;
 	u32 saveDSPBSIZE;
 	u32 saveDSPBPOS;
-	u32 saveDSPBBASE;
+	u32 saveDSPBADDR;
 	u32 saveDSPBSURF;
 	u32 saveDSPBTILEOFF;
-	u32 saveVCLK_DIVISOR_VGA0;
-	u32 saveVCLK_DIVISOR_VGA1;
-	u32 saveVCLK_POST_DIV;
+	u32 saveVGA0;
+	u32 saveVGA1;
+	u32 saveVGA_PD;
 	u32 saveVGACNTRL;
 	u32 saveADPA;
 	u32 saveLVDS;
-	u32 saveLVDSPP_ON;
-	u32 saveLVDSPP_OFF;
+	u32 savePP_ON_DELAYS;
+	u32 savePP_OFF_DELAYS;
 	u32 saveDVOA;
 	u32 saveDVOB;
 	u32 saveDVOC;
 	u32 savePP_ON;
 	u32 savePP_OFF;
 	u32 savePP_CONTROL;
-	u32 savePP_CYCLE;
+	u32 savePP_DIVISOR;
 	u32 savePFIT_CONTROL;
 	u32 save_palette_a[256];
 	u32 save_palette_b[256];
@@ -228,7 +233,7 @@ typedef struct drm_i915_private {
 	u32 saveIMR;
 	u32 saveCACHE_MODE_0;
 	u32 saveD_STATE;
-	u32 saveDSPCLK_GATE_D;
+	u32 saveCG_2D_DIS;
 	u32 saveMI_ARB_STATE;
 	u32 saveSWF0[16];
 	u32 saveSWF1[16];
@@ -357,6 +362,8 @@ typedef boolean_t bool;
 
 #define I915_VERBOSE 0
 
+#define PRIMARY_RINGBUFFER_SIZE         (128*1024)
+
 #define RING_LOCALS	unsigned int outring, ringmask, outcount; \
 			volatile char *virt;
 
@@ -384,13 +391,46 @@ typedef boolean_t bool;
 	if (I915_VERBOSE) DRM_DEBUG("ADVANCE_LP_RING %x\n", outring);	\
 	dev_priv->ring.tail = outring;					\
 	dev_priv->ring.space -= outcount * 4;				\
-	I915_WRITE(LP_RING + RING_TAIL, outring);			\
+	I915_WRITE(PRB0_TAIL, outring);			\
 } while(0)
 
 extern int i915_wait_ring(struct drm_device * dev, int n, const char *caller);
 
-/* Extended config space */
-#define LBB 0xf4
+/*
+ * The Bridge device's PCI config space has information about the
+ * fb aperture size and the amount of pre-reserved memory.
+ */
+#define INTEL_GMCH_CTRL		0x52
+#define INTEL_GMCH_ENABLED	0x4
+#define INTEL_GMCH_MEM_MASK	0x1
+#define INTEL_GMCH_MEM_64M	0x1
+#define INTEL_GMCH_MEM_128M	0
+
+#define INTEL_855_GMCH_GMS_MASK		(0x7 << 4)
+#define INTEL_855_GMCH_GMS_DISABLED	(0x0 << 4)
+#define INTEL_855_GMCH_GMS_STOLEN_1M	(0x1 << 4)
+#define INTEL_855_GMCH_GMS_STOLEN_4M	(0x2 << 4)
+#define INTEL_855_GMCH_GMS_STOLEN_8M	(0x3 << 4)
+#define INTEL_855_GMCH_GMS_STOLEN_16M	(0x4 << 4)
+#define INTEL_855_GMCH_GMS_STOLEN_32M	(0x5 << 4)
+
+#define INTEL_915G_GMCH_GMS_STOLEN_48M	(0x6 << 4)
+#define INTEL_915G_GMCH_GMS_STOLEN_64M	(0x7 << 4)
+
+/* PCI config space */
+
+#define HPLLCC	0xc0 /* 855 only */
+#define   GC_CLOCK_CONTROL_MASK		(3 << 0)
+#define   GC_CLOCK_133_200		(0 << 0)
+#define   GC_CLOCK_100_200		(1 << 0)
+#define   GC_CLOCK_100_133		(2 << 0)
+#define   GC_CLOCK_166_250		(3 << 0)
+#define GCFGC	0xf0 /* 915+ only */
+#define   GC_LOW_FREQUENCY_ENABLE	(1 << 7)
+#define   GC_DISPLAY_CLOCK_190_200_MHZ	(0 << 4)
+#define   GC_DISPLAY_CLOCK_333_MHZ	(4 << 4)
+#define   GC_DISPLAY_CLOCK_MASK		(7 << 4)
+#define LBB	0xf4
 
 /* VGA stuff */
 
@@ -433,30 +473,167 @@ extern int i915_wait_ring(struct drm_device * dev, int n, const char *caller);
 #define VGA_CR_INDEX_CGA 0x3d4
 #define VGA_CR_DATA_CGA 0x3d5
 
-#define GFX_OP_USER_INTERRUPT		((0<<29)|(2<<23))
-#define GFX_OP_BREAKPOINT_INTERRUPT	((0<<29)|(1<<23))
-#define CMD_REPORT_HEAD			(7<<23)
-#define CMD_STORE_DWORD_IMM             ((0x20<<23) | (0x1 << 22) | 0x1)
-#define CMD_STORE_DWORD_IDX		((0x21<<23) | 0x1)
-#define CMD_OP_BATCH_BUFFER  ((0x0<<29)|(0x30<<23)|0x1)
-
-#define CMD_MI_FLUSH         (0x04 << 23)
-#define MI_NO_WRITE_FLUSH    (1 << 2)
-#define MI_READ_FLUSH        (1 << 0)
-#define MI_EXE_FLUSH         (1 << 1)
-#define MI_END_SCENE         (1 << 4) /* flush binner and incr scene count */
-#define MI_SCENE_COUNT       (1 << 3) /* just increment scene count */
-
-/* Packet to load a register value from the ring/batch command stream:
+/*
+ * Memory interface instructions used by the kernel
+ */
+#define MI_INSTR(opcode, flags) (((opcode) << 23) | (flags))
+
+#define MI_NOOP			MI_INSTR(0, 0)
+#define MI_USER_INTERRUPT	MI_INSTR(0x02, 0)
+#define MI_WAIT_FOR_EVENT       MI_INSTR(0x03, 0)
+#define   MI_WAIT_FOR_PLANE_B_FLIP      (1<<6)
+#define   MI_WAIT_FOR_PLANE_A_FLIP      (1<<2)
+#define   MI_WAIT_FOR_PLANE_A_SCANLINES (1<<1)
+#define MI_FLUSH		MI_INSTR(0x04, 0)
+#define   MI_READ_FLUSH		(1 << 0)
+#define   MI_EXE_FLUSH		(1 << 1)
+#define   MI_NO_WRITE_FLUSH	(1 << 2)
+#define   MI_SCENE_COUNT	(1 << 3) /* just increment scene count */
+#define   MI_END_SCENE		(1 << 4) /* flush binner and incr scene count */
+#define MI_BATCH_BUFFER_END	MI_INSTR(0x0a, 0)
+#define MI_REPORT_HEAD		MI_INSTR(0x07, 0)
+#define MI_LOAD_SCAN_LINES_INCL MI_INSTR(0x12, 0)
+#define MI_STORE_DWORD_IMM	MI_INSTR(0x20, 1)
+#define   MI_MEM_VIRTUAL	(1 << 22) /* 965+ only */
+#define MI_STORE_DWORD_INDEX	MI_INSTR(0x21, 1)
+#define MI_LOAD_REGISTER_IMM	MI_INSTR(0x22, 1)
+#define MI_BATCH_BUFFER		MI_INSTR(0x30, 1)
+#define   MI_BATCH_NON_SECURE	(1)
+#define   MI_BATCH_NON_SECURE_I965 (1<<8)
+#define MI_BATCH_BUFFER_START	MI_INSTR(0x31, 0)
+
+#define BREADCRUMB_BITS 31
+#define BREADCRUMB_MASK ((1U << BREADCRUMB_BITS) - 1)
+
+#define READ_BREADCRUMB(dev_priv)  (((volatile u32*)(dev_priv->hw_status_page))[5])
+
+/**
+ * Reads a dword out of the status page, which is written to from the command
+ * queue by automatic updates, MI_REPORT_HEAD, MI_STORE_DATA_INDEX, or
+ * MI_STORE_DATA_IMM.
+ *
+ * The following dwords have a reserved meaning:
+ * 0: ISR copy, updated when an ISR bit not set in the HWSTAM changes.
+ * 4: ring 0 head pointer
+ * 5: ring 1 head pointer (915-class)
+ * 6: ring 2 head pointer (915-class)
+ *
+ * The area from dword 0x10 to 0x3ff is available for driver usage.
+ */
+#define READ_HWSP(dev_priv, reg)  (((volatile u32*)(dev_priv->hw_status_page))[reg])
+#define I915_GEM_HWS_INDEX		0x10
+
+/*
+ * 3D instructions used by the kernel
+ */
+#define GFX_INSTR(opcode, flags) ((0x3 << 29) | ((opcode) << 24) | (flags))
+
+#define GFX_OP_RASTER_RULES    ((0x3<<29)|(0x7<<24))
+#define GFX_OP_SCISSOR         ((0x3<<29)|(0x1c<<24)|(0x10<<19))
+#define   SC_UPDATE_SCISSOR       (0x1<<1)
+#define   SC_ENABLE_MASK          (0x1<<0)
+#define   SC_ENABLE               (0x1<<0)
+#define GFX_OP_LOAD_INDIRECT   ((0x3<<29)|(0x1d<<24)|(0x7<<16))
+#define GFX_OP_SCISSOR_INFO    ((0x3<<29)|(0x1d<<24)|(0x81<<16)|(0x1))
+#define   SCI_YMIN_MASK      (0xffff<<16)
+#define   SCI_XMIN_MASK      (0xffff<<0)
+#define   SCI_YMAX_MASK      (0xffff<<16)
+#define   SCI_XMAX_MASK      (0xffff<<0)
+#define GFX_OP_SCISSOR_ENABLE	 ((0x3<<29)|(0x1c<<24)|(0x10<<19))
+#define GFX_OP_SCISSOR_RECT	 ((0x3<<29)|(0x1d<<24)|(0x81<<16)|1)
+#define GFX_OP_COLOR_FACTOR      ((0x3<<29)|(0x1d<<24)|(0x1<<16)|0x0)
+#define GFX_OP_STIPPLE           ((0x3<<29)|(0x1d<<24)|(0x83<<16))
+#define GFX_OP_MAP_INFO          ((0x3<<29)|(0x1d<<24)|0x4)
+#define GFX_OP_DESTBUFFER_VARS   ((0x3<<29)|(0x1d<<24)|(0x85<<16)|0x0)
+#define GFX_OP_DRAWRECT_INFO     ((0x3<<29)|(0x1d<<24)|(0x80<<16)|(0x3))
+#define GFX_OP_DRAWRECT_INFO_I965  ((0x7900<<16)|0x2)
+#define SRC_COPY_BLT_CMD                ((2<<29)|(0x43<<22)|4)
+#define XY_SRC_COPY_BLT_CMD		((2<<29)|(0x53<<22)|6)
+#define XY_MONO_SRC_COPY_IMM_BLT	((2<<29)|(0x71<<22)|5)
+#define XY_SRC_COPY_BLT_WRITE_ALPHA	(1<<21)
+#define XY_SRC_COPY_BLT_WRITE_RGB	(1<<20)
+#define   BLT_DEPTH_8			(0<<24)
+#define   BLT_DEPTH_16_565		(1<<24)
+#define   BLT_DEPTH_16_1555		(2<<24)
+#define   BLT_DEPTH_32			(3<<24)
+#define   BLT_ROP_GXCOPY		(0xcc<<16)
+#define XY_SRC_COPY_BLT_SRC_TILED	(1<<15) /* 965+ only */
+#define XY_SRC_COPY_BLT_DST_TILED	(1<<11) /* 965+ only */
+#define CMD_OP_DISPLAYBUFFER_INFO ((0x0<<29)|(0x14<<23)|2)
+#define   ASYNC_FLIP                (1<<22)
+#define   DISPLAY_PLANE_A           (0<<20)
+#define   DISPLAY_PLANE_B           (1<<20)
+
+/*
+ * Instruction and interrupt control regs
  */
-#define CMD_MI_LOAD_REGISTER_IMM	((0x22 << 23)|0x1)
 
-#define BB1_START_ADDR_MASK   (~0x7)
-#define BB1_PROTECTED         (1<<0)
-#define BB1_UNPROTECTED       (0<<0)
-#define BB2_END_ADDR_MASK     (~0x7)
+#define PRB0_TAIL	0x02030
+#define PRB0_HEAD	0x02034
+#define PRB0_START	0x02038
+#define PRB0_CTL	0x0203c
+#define   TAIL_ADDR		0x001FFFF8
+#define   HEAD_WRAP_COUNT	0xFFE00000
+#define   HEAD_WRAP_ONE		0x00200000
+#define   HEAD_ADDR		0x001FFFFC
+#define   RING_NR_PAGES		0x001FF000
+#define   RING_REPORT_MASK	0x00000006
+#define   RING_REPORT_64K	0x00000002
+#define   RING_REPORT_128K	0x00000004
+#define   RING_NO_REPORT	0x00000000
+#define   RING_VALID_MASK	0x00000001
+#define   RING_VALID		0x00000001
+#define   RING_INVALID		0x00000000
+#define PRB1_TAIL	0x02040 /* 915+ only */
+#define PRB1_HEAD	0x02044 /* 915+ only */
+#define PRB1_START	0x02048 /* 915+ only */
+#define PRB1_CTL	0x0204c /* 915+ only */
+#define HWS_PGA		0x02080
+#define IPEIR		0x02088
+#define NOPID		0x02094
+#define HWSTAM		0x02098
+#define SCPD0		0x0209c /* 915+ only */
+#define IER		0x020a0
+#define IIR		0x020a4
+#define IMR		0x020a8
+#define ISR		0x020ac
+#define   I915_PIPE_CONTROL_NOTIFY_INTERRUPT		(1<<18)
+#define   I915_DISPLAY_PORT_INTERRUPT			(1<<17)
+#define   I915_RENDER_COMMAND_PARSER_ERROR_INTERRUPT	(1<<15)
+#define   I915_GMCH_THERMAL_SENSOR_EVENT_INTERRUPT	(1<<14)
+#define   I915_HWB_OOM_INTERRUPT			(1<<13)
+#define   I915_SYNC_STATUS_INTERRUPT			(1<<12)
+#define   I915_DISPLAY_PLANE_A_FLIP_PENDING_INTERRUPT	(1<<11)
+#define   I915_DISPLAY_PLANE_B_FLIP_PENDING_INTERRUPT	(1<<10)
+#define   I915_OVERLAY_PLANE_FLIP_PENDING_INTERRUPT	(1<<9)
+#define   I915_DISPLAY_PLANE_C_FLIP_PENDING_INTERRUPT	(1<<8)
+#define   I915_DISPLAY_PIPE_A_VBLANK_INTERRUPT		(1<<7)
+#define   I915_DISPLAY_PIPE_A_EVENT_INTERRUPT		(1<<6)
+#define   I915_DISPLAY_PIPE_B_VBLANK_INTERRUPT		(1<<5)
+#define   I915_DISPLAY_PIPE_B_EVENT_INTERRUPT		(1<<4)
+#define   I915_DEBUG_INTERRUPT				(1<<2)
+#define   I915_USER_INTERRUPT				(1<<1)
+#define EIR		0x020b0
+#define EMR		0x020b4
+#define ESR		0x020b8
+#define INSTPM	        0x020c0
+#define FW_BLC		0x020d8
+#define FW_BLC_SELF	0x020e0 /* 915+ only */
+#define MI_ARB_STATE	0x020e4 /* 915+ only */
+#define CACHE_MODE_0	0x02120 /* 915+ only */
+#define   CM0_MASK_SHIFT          16
+#define   CM0_IZ_OPT_DISABLE      (1<<6)
+#define   CM0_ZR_OPT_DISABLE      (1<<5)
+#define   CM0_DEPTH_EVICT_DISABLE (1<<4)
+#define   CM0_COLOR_EVICT_DISABLE (1<<3)
+#define   CM0_DEPTH_WRITE_DISABLE (1<<1)
+#define   CM0_RC_OP_FLUSH_DISABLE (1<<0)
+#define GFX_FLSH_CNTL	0x02170 /* 915+ only */
+
+/*
+ * Framebuffer compression (915+ only)
+ */
 
-/* Framebuffer compression */
 #define FBC_CFB_BASE		0x03200 /* 4k page aligned */
 #define FBC_LL_BASE		0x03204 /* 4k page aligned */
 #define FBC_CONTROL		0x03208
@@ -485,69 +662,64 @@ extern int i915_wait_ring(struct drm_device * dev, int n, const char *caller);
 #define FBC_FENCE_OFF		0x0321b
 
 #define FBC_LL_SIZE		(1536)
-#define FBC_LL_PAD		(32)
 
-/* Interrupt bits:
+/*
+ * GPIO regs
  */
-#define I915_PIPE_CONTROL_NOTIFY_INTERRUPT		(1<<18)
-#define I915_DISPLAY_PORT_INTERRUPT			(1<<17)
-#define I915_RENDER_COMMAND_PARSER_ERROR_INTERRUPT	(1<<15)
-#define I915_GMCH_THERMAL_SENSOR_EVENT_INTERRUPT	(1<<14)
-#define I915_HWB_OOM_INTERRUPT				(1<<13) /* binner out of memory */
-#define I915_SYNC_STATUS_INTERRUPT			(1<<12)
-#define I915_DISPLAY_PLANE_A_FLIP_PENDING_INTERRUPT	(1<<11)
-#define I915_DISPLAY_PLANE_B_FLIP_PENDING_INTERRUPT	(1<<10)
-#define I915_OVERLAY_PLANE_FLIP_PENDING_INTERRUPT	(1<<9)
-#define I915_DISPLAY_PLANE_C_FLIP_PENDING_INTERRUPT	(1<<8)
-#define I915_DISPLAY_PIPE_A_VBLANK_INTERRUPT		(1<<7)
-#define I915_DISPLAY_PIPE_A_EVENT_INTERRUPT		(1<<6)
-#define I915_DISPLAY_PIPE_B_VBLANK_INTERRUPT		(1<<5)
-#define I915_DISPLAY_PIPE_B_EVENT_INTERRUPT		(1<<4)
-#define I915_DEBUG_INTERRUPT				(1<<2)
-#define I915_USER_INTERRUPT				(1<<1)
-
-
-#define I915REG_HWSTAM		0x02098
-#define I915REG_INT_IDENTITY_R	0x020a4
-#define I915REG_INT_MASK_R	0x020a8
-#define I915REG_INT_ENABLE_R	0x020a0
-#define I915REG_INSTPM	        0x020c0
 
-#define PIPEADSL		0x70000
-#define PIPEBDSL		0x71000
+#define GPIOA			0x5010
+#define GPIOB			0x5014
+#define GPIOC			0x5018
+#define GPIOD			0x501c
+#define GPIOE			0x5020
+#define GPIOF			0x5024
+#define GPIOG			0x5028
+#define GPIOH			0x502c
+# define GPIO_CLOCK_DIR_MASK		(1 << 0)
+# define GPIO_CLOCK_DIR_IN		(0 << 1)
+# define GPIO_CLOCK_DIR_OUT		(1 << 1)
+# define GPIO_CLOCK_VAL_MASK		(1 << 2)
+# define GPIO_CLOCK_VAL_OUT		(1 << 3)
+# define GPIO_CLOCK_VAL_IN		(1 << 4)
+# define GPIO_CLOCK_PULLUP_DISABLE	(1 << 5)
+# define GPIO_DATA_DIR_MASK		(1 << 8)
+# define GPIO_DATA_DIR_IN		(0 << 9)
+# define GPIO_DATA_DIR_OUT		(1 << 9)
+# define GPIO_DATA_VAL_MASK		(1 << 10)
+# define GPIO_DATA_VAL_OUT		(1 << 11)
+# define GPIO_DATA_VAL_IN		(1 << 12)
+# define GPIO_DATA_PULLUP_DISABLE	(1 << 13)
 
-#define I915REG_PIPEASTAT	0x70024
-#define I915REG_PIPEBSTAT	0x71024
 /*
- * The two pipe frame counter registers are not synchronized, so
- * reading a stable value is somewhat tricky. The following code 
- * should work:
- *
- *  do {
- *    high1 = ((INREG(PIPEAFRAMEHIGH) & PIPE_FRAME_HIGH_MASK) >>
- *             PIPE_FRAME_HIGH_SHIFT;
- *    low1 =  ((INREG(PIPEAFRAMEPIXEL) & PIPE_FRAME_LOW_MASK) >>
- *             PIPE_FRAME_LOW_SHIFT);
- *    high2 = ((INREG(PIPEAFRAMEHIGH) & PIPE_FRAME_HIGH_MASK) >>
- *             PIPE_FRAME_HIGH_SHIFT);
- *  } while (high1 != high2);
- *  frame = (high1 << 8) | low1;
+ * Clock control & power management
  */
-#define PIPEAFRAMEHIGH          0x70040
-#define PIPEBFRAMEHIGH		0x71040
-#define PIPE_FRAME_HIGH_MASK    0x0000ffff
-#define PIPE_FRAME_HIGH_SHIFT   0
-#define PIPEAFRAMEPIXEL         0x70044
-#define PIPEBFRAMEPIXEL		0x71044
 
-#define PIPE_FRAME_LOW_MASK     0xff000000
-#define PIPE_FRAME_LOW_SHIFT    24
-/*
- * Pixel within the current frame is counted in the PIPEAFRAMEPIXEL register
- * and is 24 bits wide.
- */
-#define PIPE_PIXEL_MASK         0x00ffffff
-#define PIPE_PIXEL_SHIFT        0
+#define VGA0	0x6000
+#define VGA1	0x6004
+#define VGA_PD	0x6010
+#define   VGA0_PD_P2_DIV_4	(1 << 7)
+#define   VGA0_PD_P1_DIV_2	(1 << 5)
+#define   VGA0_PD_P1_SHIFT	0
+#define   VGA0_PD_P1_MASK	(0x1f << 0)
+#define   VGA1_PD_P2_DIV_4	(1 << 15)
+#define   VGA1_PD_P1_DIV_2	(1 << 13)
+#define   VGA1_PD_P1_SHIFT	8
+#define   VGA1_PD_P1_MASK	(0x1f << 8)
+#define DPLL_A	0x06014
+#define DPLL_B	0x06018
+#define   DPLL_VCO_ENABLE		(1 << 31)
+#define   DPLL_DVO_HIGH_SPEED		(1 << 30)
+#define   DPLL_SYNCLOCK_ENABLE		(1 << 29)
+#define   DPLL_VGA_MODE_DIS		(1 << 28)
+#define   DPLLB_MODE_DAC_SERIAL		(1 << 26) /* i915 */
+#define   DPLLB_MODE_LVDS		(2 << 26) /* i915 */
+#define   DPLL_MODE_MASK		(3 << 26)
+#define   DPLL_DAC_SERIAL_P2_CLOCK_DIV_10 (0 << 24) /* i915 */
+#define   DPLL_DAC_SERIAL_P2_CLOCK_DIV_5 (1 << 24) /* i915 */
+#define   DPLLB_LVDS_P2_CLOCK_DIV_14	(0 << 24) /* i915 */
+#define   DPLLB_LVDS_P2_CLOCK_DIV_7	(1 << 24) /* i915 */
+#define   DPLL_P2_CLOCK_DIV_MASK	0x03000000 /* i915 */
+#define   DPLL_FPA01_P1_POST_DIV_MASK	0x00ff0000 /* i915 */
 
 #define I915_FIFO_UNDERRUN_STATUS		(1UL<<31)
 #define I915_CRC_ERROR_ENABLE			(1UL<<29)
@@ -597,13 +769,6 @@ extern int i915_wait_ring(struct drm_device * dev, int n, const char *caller);
 #define ADPA_DPMS_STANDBY	(2<<10)
 #define ADPA_DPMS_OFF		(3<<10)
 
-#define NOPID                   0x2094
-#define LP_RING			0x2030
-#define HP_RING			0x2040
-/* The binner has its own ring buffer:
- */
-#define HWB_RING		0x2400
-
 #define RING_TAIL		0x00
 #define TAIL_ADDR		0x001FFFF8
 #define RING_HEAD		0x04
@@ -622,234 +787,127 @@ extern int i915_wait_ring(struct drm_device * dev, int n, const char *caller);
 #define RING_VALID		0x00000001
 #define RING_INVALID		0x00000000
 
-/* Instruction parser error reg:
- */
-#define IPEIR			0x2088
-
 /* Scratch pad debug 0 reg:
  */
-#define SCPD0			0x209c
-
-/* Error status reg:
+#define   DPLL_FPA01_P1_POST_DIV_MASK_I830	0x001f0000
+/*
+ * The i830 generation, in LVDS mode, defines P1 as the bit number set within
+ * this field (only one bit may be set).
  */
-#define ESR			0x20b8
-
-/* Secondary DMA fetch address debug reg:
+#define   DPLL_FPA01_P1_POST_DIV_MASK_I830_LVDS	0x003f0000
+#define   DPLL_FPA01_P1_POST_DIV_SHIFT	16
+/* i830, required in DVO non-gang */
+#define   PLL_P2_DIVIDE_BY_4		(1 << 23)
+#define   PLL_P1_DIVIDE_BY_TWO		(1 << 21) /* i830 */
+#define   PLL_REF_INPUT_DREFCLK		(0 << 13)
+#define   PLL_REF_INPUT_TVCLKINA	(1 << 13) /* i830 */
+#define   PLL_REF_INPUT_TVCLKINBC	(2 << 13) /* SDVO TVCLKIN */
+#define   PLLB_REF_INPUT_SPREADSPECTRUMIN (3 << 13)
+#define   PLL_REF_INPUT_MASK		(3 << 13)
+#define   PLL_LOAD_PULSE_PHASE_SHIFT		9
+/*
+ * Parallel to Serial Load Pulse phase selection.
+ * Selects the phase for the 10X DPLL clock for the PCIe
+ * digital display port. The range is 4 to 13; 10 or more
+ * is just a flip delay. The default is 6
  */
-#define DMA_FADD_S		0x20d4
-
-/* Memory Interface Arbitration State
+#define   PLL_LOAD_PULSE_PHASE_MASK		(0xf << PLL_LOAD_PULSE_PHASE_SHIFT)
+#define   DISPLAY_RATE_SELECT_FPA1		(1 << 8)
+/*
+ * SDVO multiplier for 945G/GM. Not used on 965.
  */
-#define MI_ARB_STATE		0x20e4
-
-/* Cache mode 0 reg.
- *  - Manipulating render cache behaviour is central
- *    to the concept of zone rendering, tuning this reg can help avoid
- *    unnecessary render cache reads and even writes (for z/stencil)
- *    at beginning and end of scene.
+#define   SDVO_MULTIPLIER_MASK			0x000000ff
+#define   SDVO_MULTIPLIER_SHIFT_HIRES		4
+#define   SDVO_MULTIPLIER_SHIFT_VGA		0
+#define DPLL_A_MD 0x0601c /* 965+ only */
+/*
+ * UDI pixel divider, controlling how many pixels are stuffed into a packet.
  *
- * - To change a bit, write to this reg with a mask bit set and the
- * bit of interest either set or cleared.  EG: (BIT<<16) | BIT to set.
- */
-#define Cache_Mode_0		0x2120
-#define CACHE_MODE_0		0x2120
-#define CM0_MASK_SHIFT          16
-#define CM0_IZ_OPT_DISABLE      (1<<6)
-#define CM0_ZR_OPT_DISABLE      (1<<5)
-#define CM0_DEPTH_EVICT_DISABLE (1<<4)
-#define CM0_COLOR_EVICT_DISABLE (1<<3)
-#define CM0_DEPTH_WRITE_DISABLE (1<<1)
-#define CM0_RC_OP_FLUSH_DISABLE (1<<0)
-
-
-/* Graphics flush control.  A CPU write flushes the GWB of all writes.
- * The data is discarded.
- */
-#define GFX_FLSH_CNTL		0x2170
-
-/* Binner control.  Defines the location of the bin pointer list:
- */
-#define BINCTL			0x2420
-#define BC_MASK			(1 << 9)
-
-/* Binned scene info.
- */
-#define BINSCENE		0x2428
-#define BS_OP_LOAD		(1 << 8)
-#define BS_MASK			(1 << 22)
-
-/* Bin command parser debug reg:
- */
-#define BCPD			0x2480
-
-/* Bin memory control debug reg:
- */
-#define BMCD			0x2484
-
-/* Bin data cache debug reg:
- */
-#define BDCD			0x2488
-
-/* Binner pointer cache debug reg:
- */
-#define BPCD			0x248c
-
-/* Binner scratch pad debug reg:
- */
-#define BINSKPD			0x24f0
-
-/* HWB scratch pad debug reg:
+ * Value is pixels minus 1.  Must be set to 1 pixel for SDVO.
  */
-#define HWBSKPD			0x24f4
-
-/* Binner memory pool reg:
+#define   DPLL_MD_UDI_DIVIDER_MASK		0x3f000000
+#define   DPLL_MD_UDI_DIVIDER_SHIFT		24
+/* UDI pixel divider for VGA, same as DPLL_MD_UDI_DIVIDER_MASK. */
+#define   DPLL_MD_VGA_UDI_DIVIDER_MASK		0x003f0000
+#define   DPLL_MD_VGA_UDI_DIVIDER_SHIFT		16
+/*
+ * SDVO/UDI pixel multiplier.
+ *
+ * SDVO requires that the bus clock rate be between 1 and 2 Ghz, and the bus
+ * clock rate is 10 times the DPLL clock.  At low resolution/refresh rate
+ * modes, the bus rate would be below the limits, so SDVO allows for stuffing
+ * dummy bytes in the datastream at an increased clock rate, with both sides of
+ * the link knowing how many bytes are fill.
+ *
+ * So, for a mode with a dotclock of 65Mhz, we would want to double the clock
+ * rate to 130Mhz to get a bus rate of 1.30Ghz.  The DPLL clock rate would be
+ * set to 130Mhz, and the SDVO multiplier set to 2x in this register and
+ * through an SDVO command.
+ *
+ * This register field has values of multiplication factor minus 1, with
+ * a maximum multiplier of 5 for SDVO.
  */
-#define BMP_BUFFER		0x2430
-#define BMP_PAGE_SIZE_4K	(0 << 10)
-#define BMP_BUFFER_SIZE_SHIFT	1
-#define BMP_ENABLE		(1 << 0)
-
-/* Get/put memory from the binner memory pool:
+#define   DPLL_MD_UDI_MULTIPLIER_MASK		0x00003f00
+#define   DPLL_MD_UDI_MULTIPLIER_SHIFT		8
+/*
+ * SDVO/UDI pixel multiplier for VGA, same as DPLL_MD_UDI_MULTIPLIER_MASK.
+ * This best be set to the default value (3) or the CRT won't work. No,
+ * I don't entirely understand what this does...
  */
-#define BMP_GET			0x2438
-#define BMP_PUT			0x2440
-#define BMP_OFFSET_SHIFT	5
+#define   DPLL_MD_VGA_UDI_MULTIPLIER_MASK	0x0000003f
+#define   DPLL_MD_VGA_UDI_MULTIPLIER_SHIFT	0
+#define DPLL_B_MD 0x06020 /* 965+ only */
+#define FPA0	0x06040
+#define FPA1	0x06044
+#define FPB0	0x06048
+#define FPB1	0x0604c
+#define   FP_N_DIV_MASK		0x003f0000
+#define   FP_N_DIV_SHIFT		16
+#define   FP_M1_DIV_MASK	0x00003f00
+#define   FP_M1_DIV_SHIFT		 8
+#define   FP_M2_DIV_MASK	0x0000003f
+#define   FP_M2_DIV_SHIFT		 0
+#define DPLL_TEST	0x606c
+#define   DPLLB_TEST_SDVO_DIV_1		(0 << 22)
+#define   DPLLB_TEST_SDVO_DIV_2		(1 << 22)
+#define   DPLLB_TEST_SDVO_DIV_4		(2 << 22)
+#define   DPLLB_TEST_SDVO_DIV_MASK	(3 << 22)
+#define   DPLLB_TEST_N_BYPASS		(1 << 19)
+#define   DPLLB_TEST_M_BYPASS		(1 << 18)
+#define   DPLLB_INPUT_BUFFER_ENABLE	(1 << 16)
+#define   DPLLA_TEST_N_BYPASS		(1 << 3)
+#define   DPLLA_TEST_M_BYPASS		(1 << 2)
+#define   DPLLA_INPUT_BUFFER_ENABLE	(1 << 0)
+#define D_STATE		0x6104
+#define CG_2D_DIS	0x6200
+#define CG_3D_DIS	0x6204
 
-/* 3D state packets:
+/*
+ * Palette regs
  */
-#define GFX_OP_RASTER_RULES    ((0x3<<29)|(0x7<<24))
-
-#define GFX_OP_SCISSOR         ((0x3<<29)|(0x1c<<24)|(0x10<<19))
-#define SC_UPDATE_SCISSOR       (0x1<<1)
-#define SC_ENABLE_MASK          (0x1<<0)
-#define SC_ENABLE               (0x1<<0)
-
-#define GFX_OP_LOAD_INDIRECT   ((0x3<<29)|(0x1d<<24)|(0x7<<16))
-
-#define GFX_OP_SCISSOR_INFO    ((0x3<<29)|(0x1d<<24)|(0x81<<16)|(0x1))
-#define SCI_YMIN_MASK      (0xffff<<16)
-#define SCI_XMIN_MASK      (0xffff<<0)
-#define SCI_YMAX_MASK      (0xffff<<16)
-#define SCI_XMAX_MASK      (0xffff<<0)
-
-#define GFX_OP_SCISSOR_ENABLE	 ((0x3<<29)|(0x1c<<24)|(0x10<<19))
-#define GFX_OP_SCISSOR_RECT	 ((0x3<<29)|(0x1d<<24)|(0x81<<16)|1)
-#define GFX_OP_COLOR_FACTOR      ((0x3<<29)|(0x1d<<24)|(0x1<<16)|0x0)
-#define GFX_OP_STIPPLE           ((0x3<<29)|(0x1d<<24)|(0x83<<16))
-#define GFX_OP_MAP_INFO          ((0x3<<29)|(0x1d<<24)|0x4)
-#define GFX_OP_DESTBUFFER_VARS   ((0x3<<29)|(0x1d<<24)|(0x85<<16)|0x0)
-#define GFX_OP_DRAWRECT_INFO     ((0x3<<29)|(0x1d<<24)|(0x80<<16)|(0x3))
-
-#define GFX_OP_DRAWRECT_INFO_I965  ((0x7900<<16)|0x2)
-
-#define SRC_COPY_BLT_CMD                ((2<<29)|(0x43<<22)|4)
-#define XY_SRC_COPY_BLT_CMD		((2<<29)|(0x53<<22)|6)
-#define XY_SRC_COPY_BLT_WRITE_ALPHA	(1<<21)
-#define XY_SRC_COPY_BLT_WRITE_RGB	(1<<20)
-#define XY_SRC_COPY_BLT_SRC_TILED	(1<<15)
-#define XY_SRC_COPY_BLT_DST_TILED	(1<<11)
-
-
-#define MI_BATCH_BUFFER		((0x30<<23)|1)
-#define MI_BATCH_BUFFER_START	(0x31<<23)
-#define MI_BATCH_BUFFER_END	(0xA<<23)
-#define MI_BATCH_NON_SECURE	(1)
-
-#define MI_BATCH_NON_SECURE_I965 (1<<8)
-
-#define MI_WAIT_FOR_EVENT       ((0x3<<23))
-#define MI_WAIT_FOR_PLANE_B_FLIP      (1<<6)
-#define MI_WAIT_FOR_PLANE_A_FLIP      (1<<2)
-#define MI_WAIT_FOR_PLANE_A_SCANLINES (1<<1)
 
-#define MI_LOAD_SCAN_LINES_INCL  ((0x12<<23))
-
-#define CMD_OP_DISPLAYBUFFER_INFO ((0x0<<29)|(0x14<<23)|2)
-#define ASYNC_FLIP                (1<<22)
-#define DISPLAY_PLANE_A           (0<<20)
-#define DISPLAY_PLANE_B           (1<<20)
-
-/* Display regs */
-#define DSPACNTR                0x70180
-#define DSPBCNTR                0x71180
-#define DISPPLANE_SEL_PIPE_MASK                 (1<<24)
+#define PALETTE_A		0x0a000
+#define PALETTE_B		0x0a800
 
-/* Define the region of interest for the binner:
+/*
+ * Overlay regs
  */
-#define CMD_OP_BIN_CONTROL	 ((0x3<<29)|(0x1d<<24)|(0x84<<16)|4)
-
-#define CMD_OP_DESTBUFFER_INFO	 ((0x3<<29)|(0x1d<<24)|(0x8e<<16)|1)
-
-#define BREADCRUMB_BITS 31
-#define BREADCRUMB_MASK ((1U << BREADCRUMB_BITS) - 1)
-
-#define READ_BREADCRUMB(dev_priv)  (((volatile u32*)(dev_priv->hw_status_page))[5])
-#define READ_HWSP(dev_priv, reg)  (((volatile u32*)(dev_priv->hw_status_page))[reg])
 
-#define BLC_PWM_CTL		0x61254
-#define BACKLIGHT_MODULATION_FREQ_SHIFT		(17)
+#define OVADD			0x30000
+#define DOVSTA			0x30008
+#define OC_BUF			(0x3<<20)
+#define OGAMC5			0x30010
+#define OGAMC4			0x30014
+#define OGAMC3			0x30018
+#define OGAMC2			0x3001c
+#define OGAMC1			0x30020
+#define OGAMC0			0x30024
 
-#define BLC_PWM_CTL2		0x61250
-/**
- * This is the most significant 15 bits of the number of backlight cycles in a
- * complete cycle of the modulated backlight control.
- *
- * The actual value is this field multiplied by two.
- */
-#define BACKLIGHT_MODULATION_FREQ_MASK		(0x7fff << 17)
-#define BLM_LEGACY_MODE				(1 << 16)
-/**
- * This is the number of cycles out of the backlight modulation cycle for which
- * the backlight is on.
- *
- * This field must be no greater than the number of cycles in the complete
- * backlight modulation cycle.
- */
-#define BACKLIGHT_DUTY_CYCLE_SHIFT		(0)
-#define BACKLIGHT_DUTY_CYCLE_MASK		(0xffff)
-
-#define I915_GCFGC			0xf0
-#define I915_LOW_FREQUENCY_ENABLE		(1 << 7)
-#define I915_DISPLAY_CLOCK_190_200_MHZ		(0 << 4)
-#define I915_DISPLAY_CLOCK_333_MHZ		(4 << 4)
-#define I915_DISPLAY_CLOCK_MASK			(7 << 4)
-
-#define I855_HPLLCC			0xc0
-#define I855_CLOCK_CONTROL_MASK			(3 << 0)
-#define I855_CLOCK_133_200			(0 << 0)
-#define I855_CLOCK_100_200			(1 << 0)
-#define I855_CLOCK_100_133			(2 << 0)
-#define I855_CLOCK_166_250			(3 << 0)
-
-/* p317, 319
+/*
+ * Display engine regs
  */
-#define VCLK2_VCO_M        0x6008 /* treat as 16 bit? (includes msbs) */
-#define VCLK2_VCO_N        0x600a
-#define VCLK2_VCO_DIV_SEL  0x6012
-
-#define VCLK_DIVISOR_VGA0   0x6000
-#define VCLK_DIVISOR_VGA1   0x6004
-#define VCLK_POST_DIV	    0x6010
-/** Selects a post divisor of 4 instead of 2. */
-# define VGA1_PD_P2_DIV_4	(1 << 15)
-/** Overrides the p2 post divisor field */
-# define VGA1_PD_P1_DIV_2	(1 << 13)
-# define VGA1_PD_P1_SHIFT	8
-/** P1 value is 2 greater than this field */
-# define VGA1_PD_P1_MASK	(0x1f << 8)
-/** Selects a post divisor of 4 instead of 2. */
-# define VGA0_PD_P2_DIV_4	(1 << 7)
-/** Overrides the p2 post divisor field */
-# define VGA0_PD_P1_DIV_2	(1 << 5)
-# define VGA0_PD_P1_SHIFT	0
-/** P1 value is 2 greater than this field */
-# define VGA0_PD_P1_MASK	(0x1f << 0)
-
-/* PCI D state control register */
-#define D_STATE		0x6104
-#define DSPCLK_GATE_D	0x6200
 
-/* I830 CRTC registers */
+/* Pipe A timing regs */
 #define HTOTAL_A	0x60000
 #define HBLANK_A	0x60004
 #define HSYNC_A		0x60008
@@ -858,8 +916,8 @@ extern int i915_wait_ring(struct drm_device * dev, int n, const char *caller);
 #define VSYNC_A		0x60014
 #define PIPEASRC	0x6001c
 #define BCLRPAT_A	0x60020
-#define VSYNCSHIFT_A	0x60028
 
+/* Pipe B timing regs */
 #define HTOTAL_B	0x61000
 #define HBLANK_B	0x61004
 #define HSYNC_B		0x61008
@@ -868,413 +926,856 @@ extern int i915_wait_ring(struct drm_device * dev, int n, const char *caller);
 #define VSYNC_B		0x61014
 #define PIPEBSRC	0x6101c
 #define BCLRPAT_B	0x61020
-#define VSYNCSHIFT_B	0x61028
 
-#define HACTIVE_MASK	0x00000fff
-#define VTOTAL_MASK	0x00001fff
-#define VTOTAL_SHIFT	16
-#define VACTIVE_MASK	0x00000fff
-#define VBLANK_END_MASK	0x00001fff
-#define VBLANK_END_SHIFT 16
-#define VBLANK_START_MASK 0x00001fff
+/* VGA port control */
+#define ADPA			0x61100
+#define   ADPA_DAC_ENABLE	(1<<31)
+#define   ADPA_DAC_DISABLE	0
+#define   ADPA_PIPE_SELECT_MASK	(1<<30)
+#define   ADPA_PIPE_A_SELECT	0
+#define   ADPA_PIPE_B_SELECT	(1<<30)
+#define   ADPA_USE_VGA_HVPOLARITY (1<<15)
+#define   ADPA_SETS_HVPOLARITY	0
+#define   ADPA_VSYNC_CNTL_DISABLE (1<<11)
+#define   ADPA_VSYNC_CNTL_ENABLE 0
+#define   ADPA_HSYNC_CNTL_DISABLE (1<<10)
+#define   ADPA_HSYNC_CNTL_ENABLE 0
+#define   ADPA_VSYNC_ACTIVE_HIGH (1<<4)
+#define   ADPA_VSYNC_ACTIVE_LOW	0
+#define   ADPA_HSYNC_ACTIVE_HIGH (1<<3)
+#define   ADPA_HSYNC_ACTIVE_LOW	0
+#define   ADPA_DPMS_MASK	(~(3<<10))
+#define   ADPA_DPMS_ON		(0<<10)
+#define   ADPA_DPMS_SUSPEND	(1<<10)
+#define   ADPA_DPMS_STANDBY	(2<<10)
+#define   ADPA_DPMS_OFF		(3<<10)
+
+/* Hotplug control (945+ only) */
+#define PORT_HOTPLUG_EN		0x61110
+#define   SDVOB_HOTPLUG_INT_EN			(1 << 26)
+#define   SDVOC_HOTPLUG_INT_EN			(1 << 25)
+#define   TV_HOTPLUG_INT_EN			(1 << 18)
+#define   CRT_HOTPLUG_INT_EN			(1 << 9)
+#define   CRT_HOTPLUG_FORCE_DETECT		(1 << 3)
 
-#define PP_STATUS	0x61200
-# define PP_ON					(1 << 31)
+#define PORT_HOTPLUG_STAT	0x61114
+#define   CRT_HOTPLUG_INT_STATUS		(1 << 11)
+#define   TV_HOTPLUG_INT_STATUS			(1 << 10)
+#define   CRT_HOTPLUG_MONITOR_MASK		(3 << 8)
+#define   CRT_HOTPLUG_MONITOR_COLOR		(3 << 8)
+#define   CRT_HOTPLUG_MONITOR_MONO		(2 << 8)
+#define   CRT_HOTPLUG_MONITOR_NONE		(0 << 8)
+#define   SDVOC_HOTPLUG_INT_STATUS		(1 << 7)
+#define   SDVOB_HOTPLUG_INT_STATUS		(1 << 6)
+
+/* SDVO port control */
+#define SDVOB			0x61140
+#define SDVOC			0x61160
+#define   SDVO_ENABLE		(1 << 31)
+#define   SDVO_PIPE_B_SELECT	(1 << 30)
+#define   SDVO_STALL_SELECT	(1 << 29)
+#define   SDVO_INTERRUPT_ENABLE	(1 << 26)
 /**
+ * 915G/GM SDVO pixel multiplier.
+ *
+ * Programmed value is multiplier - 1, up to 5x.
+ *
+ * \sa DPLL_MD_UDI_MULTIPLIER_MASK
+ */
+#define   SDVO_PORT_MULTIPLY_MASK	(7 << 23)
+#define   SDVO_PORT_MULTIPLY_SHIFT		23
+#define   SDVO_PHASE_SELECT_MASK	(15 << 19)
+#define   SDVO_PHASE_SELECT_DEFAULT	(6 << 19)
+#define   SDVO_CLOCK_OUTPUT_INVERT	(1 << 18)
+#define   SDVOC_GANG_MODE		(1 << 16)
+#define   SDVO_BORDER_ENABLE		(1 << 7)
+#define   SDVOB_PCIE_CONCURRENCY	(1 << 3)
+#define   SDVO_DETECTED			(1 << 2)
+/* Bits to be preserved when writing */
+#define   SDVOB_PRESERVE_MASK ((1 << 17) | (1 << 16) | (1 << 14) | (1 << 26))
+#define   SDVOC_PRESERVE_MASK ((1 << 17) | (1 << 26))
+
+/* DVO port control */
+#define DVOA			0x61120
+#define DVOB			0x61140
+#define DVOC			0x61160
+#define   DVO_ENABLE			(1 << 31)
+#define   DVO_PIPE_B_SELECT		(1 << 30)
+#define   DVO_PIPE_STALL_UNUSED		(0 << 28)
+#define   DVO_PIPE_STALL		(1 << 28)
+#define   DVO_PIPE_STALL_TV		(2 << 28)
+#define   DVO_PIPE_STALL_MASK		(3 << 28)
+#define   DVO_USE_VGA_SYNC		(1 << 15)
+#define   DVO_DATA_ORDER_I740		(0 << 14)
+#define   DVO_DATA_ORDER_FP		(1 << 14)
+#define   DVO_VSYNC_DISABLE		(1 << 11)
+#define   DVO_HSYNC_DISABLE		(1 << 10)
+#define   DVO_VSYNC_TRISTATE		(1 << 9)
+#define   DVO_HSYNC_TRISTATE		(1 << 8)
+#define   DVO_BORDER_ENABLE		(1 << 7)
+#define   DVO_DATA_ORDER_GBRG		(1 << 6)
+#define   DVO_DATA_ORDER_RGGB		(0 << 6)
+#define   DVO_DATA_ORDER_GBRG_ERRATA	(0 << 6)
+#define   DVO_DATA_ORDER_RGGB_ERRATA	(1 << 6)
+#define   DVO_VSYNC_ACTIVE_HIGH		(1 << 4)
+#define   DVO_HSYNC_ACTIVE_HIGH		(1 << 3)
+#define   DVO_BLANK_ACTIVE_HIGH		(1 << 2)
+#define   DVO_OUTPUT_CSTATE_PIXELS	(1 << 1)	/* SDG only */
+#define   DVO_OUTPUT_SOURCE_SIZE_PIXELS	(1 << 0)	/* SDG only */
+#define   DVO_PRESERVE_MASK		(0x7<<24)
+#define DVOA_SRCDIM		0x61124
+#define DVOB_SRCDIM		0x61144
+#define DVOC_SRCDIM		0x61164
+#define   DVO_SRCDIM_HORIZONTAL_SHIFT	12
+#define   DVO_SRCDIM_VERTICAL_SHIFT	0
+
+/* LVDS port control */
+#define LVDS			0x61180
+/*
+ * Enables the LVDS port.  This bit must be set before DPLLs are enabled, as
+ * the DPLL semantics change when the LVDS is assigned to that pipe.
+ */
+#define   LVDS_PORT_EN			(1 << 31)
+/* Selects pipe B for LVDS data.  Must be set on pre-965. */
+#define   LVDS_PIPEB_SELECT		(1 << 30)
+/*
+ * Enables the A0-A2 data pairs and CLKA, containing 18 bits of color data per
+ * pixel.
+ */
+#define   LVDS_A0A2_CLKA_POWER_MASK	(3 << 8)
+#define   LVDS_A0A2_CLKA_POWER_DOWN	(0 << 8)
+#define   LVDS_A0A2_CLKA_POWER_UP	(3 << 8)
+/*
+ * Controls the A3 data pair, which contains the additional LSBs for 24 bit
+ * mode.  Only enabled if LVDS_A0A2_CLKA_POWER_UP also indicates it should be
+ * on.
+ */
+#define   LVDS_A3_POWER_MASK		(3 << 6)
+#define   LVDS_A3_POWER_DOWN		(0 << 6)
+#define   LVDS_A3_POWER_UP		(3 << 6)
+/*
+ * Controls the CLKB pair.  This should only be set when LVDS_B0B3_POWER_UP
+ * is set.
+ */
+#define   LVDS_CLKB_POWER_MASK		(3 << 4)
+#define   LVDS_CLKB_POWER_DOWN		(0 << 4)
+#define   LVDS_CLKB_POWER_UP		(3 << 4)
+/*
+ * Controls the B0-B3 data pairs.  This must be set to match the DPLL p2
+ * setting for whether we are in dual-channel mode.  The B3 pair will
+ * additionally only be powered up when LVDS_A3_POWER_UP is set.
+ */
+#define   LVDS_B0B3_POWER_MASK		(3 << 2)
+#define   LVDS_B0B3_POWER_DOWN		(0 << 2)
+#define   LVDS_B0B3_POWER_UP		(3 << 2)
+
+/* Panel power sequencing */
+#define PP_STATUS	0x61200
+#define   PP_ON		(1 << 31)
+/*
  * Indicates that all dependencies of the panel are on:
  *
  * - PLL enabled
  * - pipe enabled
  * - LVDS/DVOB/DVOC on
  */
-# define PP_READY				(1 << 30)
-# define PP_SEQUENCE_NONE			(0 << 28)
-# define PP_SEQUENCE_ON				(1 << 28)
-# define PP_SEQUENCE_OFF			(2 << 28)
-# define PP_SEQUENCE_MASK			0x30000000
+#define   PP_READY		(1 << 30)
+#define   PP_SEQUENCE_NONE	(0 << 28)
+#define   PP_SEQUENCE_ON	(1 << 28)
+#define   PP_SEQUENCE_OFF	(2 << 28)
+#define   PP_SEQUENCE_MASK	0x30000000
 #define PP_CONTROL	0x61204
-# define POWER_TARGET_ON			(1 << 0)
-
-#define LVDSPP_ON       0x61208
-#define LVDSPP_OFF      0x6120c
-#define PP_CYCLE        0x61210
+#define   POWER_TARGET_ON	(1 << 0)
+#define PP_ON_DELAYS	0x61208
+#define PP_OFF_DELAYS	0x6120c
+#define PP_DIVISOR	0x61210
 
+/* Panel fitting */
 #define PFIT_CONTROL	0x61230
-# define PFIT_ENABLE				(1 << 31)
-# define PFIT_PIPE_MASK				(3 << 29)
-# define PFIT_PIPE_SHIFT			29
-# define VERT_INTERP_DISABLE			(0 << 10)
-# define VERT_INTERP_BILINEAR			(1 << 10)
-# define VERT_INTERP_MASK			(3 << 10)
-# define VERT_AUTO_SCALE			(1 << 9)
-# define HORIZ_INTERP_DISABLE			(0 << 6)
-# define HORIZ_INTERP_BILINEAR			(1 << 6)
-# define HORIZ_INTERP_MASK			(3 << 6)
-# define HORIZ_AUTO_SCALE			(1 << 5)
-# define PANEL_8TO6_DITHER_ENABLE		(1 << 3)
-
+#define   PFIT_ENABLE		(1 << 31)
+#define   PFIT_PIPE_MASK	(3 << 29)
+#define   PFIT_PIPE_SHIFT	29
+#define   VERT_INTERP_DISABLE	(0 << 10)
+#define   VERT_INTERP_BILINEAR	(1 << 10)
+#define   VERT_INTERP_MASK	(3 << 10)
+#define   VERT_AUTO_SCALE	(1 << 9)
+#define   HORIZ_INTERP_DISABLE	(0 << 6)
+#define   HORIZ_INTERP_BILINEAR	(1 << 6)
+#define   HORIZ_INTERP_MASK	(3 << 6)
+#define   HORIZ_AUTO_SCALE	(1 << 5)
+#define   PANEL_8TO6_DITHER_ENABLE (1 << 3)
 #define PFIT_PGM_RATIOS	0x61234
-# define PFIT_VERT_SCALE_MASK			0xfff00000
-# define PFIT_HORIZ_SCALE_MASK			0x0000fff0
-
-#define PFIT_AUTO_RATIOS	0x61238
-
-
-#define DPLL_A		0x06014
-#define DPLL_B		0x06018
-# define DPLL_VCO_ENABLE			(1 << 31)
-# define DPLL_DVO_HIGH_SPEED			(1 << 30)
-# define DPLL_SYNCLOCK_ENABLE			(1 << 29)
-# define DPLL_VGA_MODE_DIS			(1 << 28)
-# define DPLLB_MODE_DAC_SERIAL			(1 << 26) /* i915 */
-# define DPLLB_MODE_LVDS			(2 << 26) /* i915 */
-# define DPLL_MODE_MASK				(3 << 26)
-# define DPLL_DAC_SERIAL_P2_CLOCK_DIV_10	(0 << 24) /* i915 */
-# define DPLL_DAC_SERIAL_P2_CLOCK_DIV_5		(1 << 24) /* i915 */
-# define DPLLB_LVDS_P2_CLOCK_DIV_14		(0 << 24) /* i915 */
-# define DPLLB_LVDS_P2_CLOCK_DIV_7		(1 << 24) /* i915 */
-# define DPLL_P2_CLOCK_DIV_MASK			0x03000000 /* i915 */
-# define DPLL_FPA01_P1_POST_DIV_MASK		0x00ff0000 /* i915 */
-/**
- *  The i830 generation, in DAC/serial mode, defines p1 as two plus this
- * bitfield, or just 2 if PLL_P1_DIVIDE_BY_TWO is set.
+#define   PFIT_VERT_SCALE_MASK			0xfff00000
+#define   PFIT_HORIZ_SCALE_MASK			0x0000fff0
+#define PFIT_AUTO_RATIOS 0x61238
+
+/* Backlight control */
+#define BLC_PWM_CTL		0x61254
+#define   BACKLIGHT_MODULATION_FREQ_SHIFT		(17)
+#define BLC_PWM_CTL2		0x61250 /* 965+ only */
+/*
+ * This is the most significant 15 bits of the number of backlight cycles in a
+ * complete cycle of the modulated backlight control.
+ *
+ * The actual value is this field multiplied by two.
+ */
+#define   BACKLIGHT_MODULATION_FREQ_MASK		(0x7fff << 17)
+#define   BLM_LEGACY_MODE				(1 << 16)
+/*
+ * This is the number of cycles out of the backlight modulation cycle for which
+ * the backlight is on.
+ *
+ * This field must be no greater than the number of cycles in the complete
+ * backlight modulation cycle.
  */
-# define DPLL_FPA01_P1_POST_DIV_MASK_I830	0x001f0000
+#define   BACKLIGHT_DUTY_CYCLE_SHIFT		(0)
+#define   BACKLIGHT_DUTY_CYCLE_MASK		(0xffff)
+
+/* TV port control */
+#define TV_CTL			0x68000
+/** Enables the TV encoder */
+# define TV_ENC_ENABLE			(1 << 31)
+/** Sources the TV encoder input from pipe B instead of A. */
+# define TV_ENC_PIPEB_SELECT		(1 << 30)
+/** Outputs composite video (DAC A only) */
+# define TV_ENC_OUTPUT_COMPOSITE	(0 << 28)
+/** Outputs SVideo video (DAC B/C) */
+# define TV_ENC_OUTPUT_SVIDEO		(1 << 28)
+/** Outputs Component video (DAC A/B/C) */
+# define TV_ENC_OUTPUT_COMPONENT	(2 << 28)
+/** Outputs Composite and SVideo (DAC A/B/C) */
+# define TV_ENC_OUTPUT_SVIDEO_COMPOSITE	(3 << 28)
+# define TV_TRILEVEL_SYNC		(1 << 21)
+/** Enables slow sync generation (945GM only) */
+# define TV_SLOW_SYNC			(1 << 20)
+/** Selects 4x oversampling for 480i and 576p */
+# define TV_OVERSAMPLE_4X		(0 << 18)
+/** Selects 2x oversampling for 720p and 1080i */
+# define TV_OVERSAMPLE_2X		(1 << 18)
+/** Selects no oversampling for 1080p */
+# define TV_OVERSAMPLE_NONE		(2 << 18)
+/** Selects 8x oversampling */
+# define TV_OVERSAMPLE_8X		(3 << 18)
+/** Selects progressive mode rather than interlaced */
+# define TV_PROGRESSIVE			(1 << 17)
+/** Sets the colorburst to PAL mode.  Required for non-M PAL modes. */
+# define TV_PAL_BURST			(1 << 16)
+/** Field for setting delay of Y compared to C */
+# define TV_YC_SKEW_MASK		(7 << 12)
+/** Enables a fix for 480p/576p standard definition modes on the 915GM only */
+# define TV_ENC_SDP_FIX			(1 << 11)
 /**
- * The i830 generation, in LVDS mode, defines P1 as the bit number set within
- * this field (only one bit may be set).
+ * Enables a fix for the 915GM only.
+ *
+ * Not sure what it does.
  */
-# define DPLL_FPA01_P1_POST_DIV_MASK_I830_LVDS	0x003f0000
-# define DPLL_FPA01_P1_POST_DIV_SHIFT		16
-# define PLL_P2_DIVIDE_BY_4			(1 << 23) /* i830, required in DVO non-gang */
-# define PLL_P1_DIVIDE_BY_TWO			(1 << 21) /* i830 */
-# define PLL_REF_INPUT_DREFCLK			(0 << 13)
-# define PLL_REF_INPUT_TVCLKINA			(1 << 13) /* i830 */
-# define PLL_REF_INPUT_TVCLKINBC		(2 << 13) /* SDVO TVCLKIN */
-# define PLLB_REF_INPUT_SPREADSPECTRUMIN	(3 << 13)
-# define PLL_REF_INPUT_MASK			(3 << 13)
-# define PLL_LOAD_PULSE_PHASE_SHIFT		9
-/*
- * Parallel to Serial Load Pulse phase selection.
- * Selects the phase for the 10X DPLL clock for the PCIe
- * digital display port. The range is 4 to 13; 10 or more
- * is just a flip delay. The default is 6
+# define TV_ENC_C0_FIX			(1 << 10)
+/** Bits that must be preserved by software */
+# define TV_CTL_SAVE			((3 << 8) | (3 << 6))
+# define TV_FUSE_STATE_MASK		(3 << 4)
+/** Read-only state that reports all features enabled */
+# define TV_FUSE_STATE_ENABLED		(0 << 4)
+/** Read-only state that reports that Macrovision is disabled in hardware*/
+# define TV_FUSE_STATE_NO_MACROVISION	(1 << 4)
+/** Read-only state that reports that TV-out is disabled in hardware. */
+# define TV_FUSE_STATE_DISABLED		(2 << 4)
+/** Normal operation */
+# define TV_TEST_MODE_NORMAL		(0 << 0)
+/** Encoder test pattern 1 - combo pattern */
+# define TV_TEST_MODE_PATTERN_1		(1 << 0)
+/** Encoder test pattern 2 - full screen vertical 75% color bars */
+# define TV_TEST_MODE_PATTERN_2		(2 << 0)
+/** Encoder test pattern 3 - full screen horizontal 75% color bars */
+# define TV_TEST_MODE_PATTERN_3		(3 << 0)
+/** Encoder test pattern 4 - random noise */
+# define TV_TEST_MODE_PATTERN_4		(4 << 0)
+/** Encoder test pattern 5 - linear color ramps */
+# define TV_TEST_MODE_PATTERN_5		(5 << 0)
+/**
+ * This test mode forces the DACs to 50% of full output.
+ *
+ * This is used for load detection in combination with TVDAC_SENSE_MASK
  */
-# define PLL_LOAD_PULSE_PHASE_MASK		(0xf << PLL_LOAD_PULSE_PHASE_SHIFT)
-# define DISPLAY_RATE_SELECT_FPA1		(1 << 8)
+# define TV_TEST_MODE_MONITOR_DETECT	(7 << 0)
+# define TV_TEST_MODE_MASK		(7 << 0)
 
+#define TV_DAC			0x68004
 /**
- * SDVO multiplier for 945G/GM. Not used on 965.
+ * Reports that DAC state change logic has reported change (RO).
  *
- * \sa DPLL_MD_UDI_MULTIPLIER_MASK
+ * This gets cleared when TV_DAC_STATE_EN is cleared
+*/
+# define TVDAC_STATE_CHG		(1 << 31)
+# define TVDAC_SENSE_MASK		(7 << 28)
+/** Reports that DAC A voltage is above the detect threshold */
+# define TVDAC_A_SENSE			(1 << 30)
+/** Reports that DAC B voltage is above the detect threshold */
+# define TVDAC_B_SENSE			(1 << 29)
+/** Reports that DAC C voltage is above the detect threshold */
+# define TVDAC_C_SENSE			(1 << 28)
+/**
+ * Enables DAC state detection logic, for load-based TV detection.
+ *
+ * The PLL of the chosen pipe (in TV_CTL) must be running, and the encoder set
+ * to off, for load detection to work.
  */
-# define SDVO_MULTIPLIER_MASK			0x000000ff
-# define SDVO_MULTIPLIER_SHIFT_HIRES		4
-# define SDVO_MULTIPLIER_SHIFT_VGA		0
+# define TVDAC_STATE_CHG_EN		(1 << 27)
+/** Sets the DAC A sense value to high */
+# define TVDAC_A_SENSE_CTL		(1 << 26)
+/** Sets the DAC B sense value to high */
+# define TVDAC_B_SENSE_CTL		(1 << 25)
+/** Sets the DAC C sense value to high */
+# define TVDAC_C_SENSE_CTL		(1 << 24)
+/** Overrides the ENC_ENABLE and DAC voltage levels */
+# define DAC_CTL_OVERRIDE		(1 << 7)
+/** Sets the slew rate.  Must be preserved in software */
+# define ENC_TVDAC_SLEW_FAST		(1 << 6)
+# define DAC_A_1_3_V			(0 << 4)
+# define DAC_A_1_1_V			(1 << 4)
+# define DAC_A_0_7_V			(2 << 4)
+# define DAC_A_OFF			(3 << 4)
+# define DAC_B_1_3_V			(0 << 2)
+# define DAC_B_1_1_V			(1 << 2)
+# define DAC_B_0_7_V			(2 << 2)
+# define DAC_B_OFF			(3 << 2)
+# define DAC_C_1_3_V			(0 << 0)
+# define DAC_C_1_1_V			(1 << 0)
+# define DAC_C_0_7_V			(2 << 0)
+# define DAC_C_OFF			(3 << 0)
 
-/** @defgroup DPLL_MD
- * @{
+/**
+ * CSC coefficients are stored in a floating point format with 9 bits of
+ * mantissa and 2 or 3 bits of exponent.  The exponent is represented as 2**-n,
+ * where 2-bit exponents are unsigned n, and 3-bit exponents are signed n with
+ * -1 (0x3) being the only legal negative value.
  */
-/** Pipe A SDVO/UDI clock multiplier/divider register for G965. */
-#define DPLL_A_MD		0x0601c
-/** Pipe B SDVO/UDI clock multiplier/divider register for G965. */
-#define DPLL_B_MD		0x06020
+#define TV_CSC_Y		0x68010
+# define TV_RY_MASK			0x07ff0000
+# define TV_RY_SHIFT			16
+# define TV_GY_MASK			0x00000fff
+# define TV_GY_SHIFT			0
+
+#define TV_CSC_Y2		0x68014
+# define TV_BY_MASK			0x07ff0000
+# define TV_BY_SHIFT			16
 /**
- * UDI pixel divider, controlling how many pixels are stuffed into a packet.
+ * Y attenuation for component video.
  *
- * Value is pixels minus 1.  Must be set to 1 pixel for SDVO.
+ * Stored in 1.9 fixed point.
  */
-# define DPLL_MD_UDI_DIVIDER_MASK		0x3f000000
-# define DPLL_MD_UDI_DIVIDER_SHIFT		24
-/** UDI pixel divider for VGA, same as DPLL_MD_UDI_DIVIDER_MASK. */
-# define DPLL_MD_VGA_UDI_DIVIDER_MASK		0x003f0000
-# define DPLL_MD_VGA_UDI_DIVIDER_SHIFT		16
+# define TV_AY_MASK			0x000003ff
+# define TV_AY_SHIFT			0
+
+#define TV_CSC_U		0x68018
+# define TV_RU_MASK			0x07ff0000
+# define TV_RU_SHIFT			16
+# define TV_GU_MASK			0x000007ff
+# define TV_GU_SHIFT			0
+
+#define TV_CSC_U2		0x6801c
+# define TV_BU_MASK			0x07ff0000
+# define TV_BU_SHIFT			16
 /**
- * SDVO/UDI pixel multiplier.
- *
- * SDVO requires that the bus clock rate be between 1 and 2 Ghz, and the bus
- * clock rate is 10 times the DPLL clock.  At low resolution/refresh rate
- * modes, the bus rate would be below the limits, so SDVO allows for stuffing
- * dummy bytes in the datastream at an increased clock rate, with both sides of
- * the link knowing how many bytes are fill.
+ * U attenuation for component video.
  *
- * So, for a mode with a dotclock of 65Mhz, we would want to double the clock
- * rate to 130Mhz to get a bus rate of 1.30Ghz.  The DPLL clock rate would be
- * set to 130Mhz, and the SDVO multiplier set to 2x in this register and
- * through an SDVO command.
+ * Stored in 1.9 fixed point.
+ */
+# define TV_AU_MASK			0x000003ff
+# define TV_AU_SHIFT			0
+
+#define TV_CSC_V		0x68020
+# define TV_RV_MASK			0x0fff0000
+# define TV_RV_SHIFT			16
+# define TV_GV_MASK			0x000007ff
+# define TV_GV_SHIFT			0
+
+#define TV_CSC_V2		0x68024
+# define TV_BV_MASK			0x07ff0000
+# define TV_BV_SHIFT			16
+/**
+ * V attenuation for component video.
  *
- * This register field has values of multiplication factor minus 1, with
- * a maximum multiplier of 5 for SDVO.
+ * Stored in 1.9 fixed point.
  */
-# define DPLL_MD_UDI_MULTIPLIER_MASK		0x00003f00
-# define DPLL_MD_UDI_MULTIPLIER_SHIFT		8
-/** SDVO/UDI pixel multiplier for VGA, same as DPLL_MD_UDI_MULTIPLIER_MASK.
- * This best be set to the default value (3) or the CRT won't work. No,
- * I don't entirely understand what this does...
+# define TV_AV_MASK			0x000007ff
+# define TV_AV_SHIFT			0
+
+#define TV_CLR_KNOBS		0x68028
+/** 2s-complement brightness adjustment */
+# define TV_BRIGHTNESS_MASK		0xff000000
+# define TV_BRIGHTNESS_SHIFT		24
+/** Contrast adjustment, as a 2.6 unsigned floating point number */
+# define TV_CONTRAST_MASK		0x00ff0000
+# define TV_CONTRAST_SHIFT		16
+/** Saturation adjustment, as a 2.6 unsigned floating point number */
+# define TV_SATURATION_MASK		0x0000ff00
+# define TV_SATURATION_SHIFT		8
+/** Hue adjustment, as an integer phase angle in degrees */
+# define TV_HUE_MASK			0x000000ff
+# define TV_HUE_SHIFT			0
+
+#define TV_CLR_LEVEL		0x6802c
+/** Controls the DAC level for black */
+# define TV_BLACK_LEVEL_MASK		0x01ff0000
+# define TV_BLACK_LEVEL_SHIFT		16
+/** Controls the DAC level for blanking */
+# define TV_BLANK_LEVEL_MASK		0x000001ff
+# define TV_BLANK_LEVEL_SHIFT		0
+
+#define TV_H_CTL_1		0x68030
+/** Number of pixels in the hsync. */
+# define TV_HSYNC_END_MASK		0x1fff0000
+# define TV_HSYNC_END_SHIFT		16
+/** Total number of pixels minus one in the line (display and blanking). */
+# define TV_HTOTAL_MASK			0x00001fff
+# define TV_HTOTAL_SHIFT		0
+
+#define TV_H_CTL_2		0x68034
+/** Enables the colorburst (needed for non-component color) */
+# define TV_BURST_ENA			(1 << 31)
+/** Offset of the colorburst from the start of hsync, in pixels minus one. */
+# define TV_HBURST_START_SHIFT		16
+# define TV_HBURST_START_MASK		0x1fff0000
+/** Length of the colorburst */
+# define TV_HBURST_LEN_SHIFT		0
+# define TV_HBURST_LEN_MASK		0x0001fff
+
+#define TV_H_CTL_3		0x68038
+/** End of hblank, measured in pixels minus one from start of hsync */
+# define TV_HBLANK_END_SHIFT		16
+# define TV_HBLANK_END_MASK		0x1fff0000
+/** Start of hblank, measured in pixels minus one from start of hsync */
+# define TV_HBLANK_START_SHIFT		0
+# define TV_HBLANK_START_MASK		0x0001fff
+
+#define TV_V_CTL_1		0x6803c
+/** XXX */
+# define TV_NBR_END_SHIFT		16
+# define TV_NBR_END_MASK		0x07ff0000
+/** XXX */
+# define TV_VI_END_F1_SHIFT		8
+# define TV_VI_END_F1_MASK		0x00003f00
+/** XXX */
+# define TV_VI_END_F2_SHIFT		0
+# define TV_VI_END_F2_MASK		0x0000003f
+
+#define TV_V_CTL_2		0x68040
+/** Length of vsync, in half lines */
+# define TV_VSYNC_LEN_MASK		0x07ff0000
+# define TV_VSYNC_LEN_SHIFT		16
+/** Offset of the start of vsync in field 1, measured in one less than the
+ * number of half lines.
  */
-# define DPLL_MD_VGA_UDI_MULTIPLIER_MASK	0x0000003f
-# define DPLL_MD_VGA_UDI_MULTIPLIER_SHIFT	0
-/** @} */
-
-#define DPLL_TEST		0x606c
-# define DPLLB_TEST_SDVO_DIV_1			(0 << 22)
-# define DPLLB_TEST_SDVO_DIV_2			(1 << 22)
-# define DPLLB_TEST_SDVO_DIV_4			(2 << 22)
-# define DPLLB_TEST_SDVO_DIV_MASK		(3 << 22)
-# define DPLLB_TEST_N_BYPASS			(1 << 19)
-# define DPLLB_TEST_M_BYPASS			(1 << 18)
-# define DPLLB_INPUT_BUFFER_ENABLE		(1 << 16)
-# define DPLLA_TEST_N_BYPASS			(1 << 3)
-# define DPLLA_TEST_M_BYPASS			(1 << 2)
-# define DPLLA_INPUT_BUFFER_ENABLE		(1 << 0)
-
-#define ADPA			0x61100
-#define ADPA_DAC_ENABLE		(1<<31)
-#define ADPA_DAC_DISABLE	0
-#define ADPA_PIPE_SELECT_MASK	(1<<30)
-#define ADPA_PIPE_A_SELECT	0
-#define ADPA_PIPE_B_SELECT	(1<<30)
-#define ADPA_USE_VGA_HVPOLARITY (1<<15)
-#define ADPA_SETS_HVPOLARITY	0
-#define ADPA_VSYNC_CNTL_DISABLE (1<<11)
-#define ADPA_VSYNC_CNTL_ENABLE	0
-#define ADPA_HSYNC_CNTL_DISABLE (1<<10)
-#define ADPA_HSYNC_CNTL_ENABLE	0
-#define ADPA_VSYNC_ACTIVE_HIGH	(1<<4)
-#define ADPA_VSYNC_ACTIVE_LOW	0
-#define ADPA_HSYNC_ACTIVE_HIGH	(1<<3)
-#define ADPA_HSYNC_ACTIVE_LOW	0
-
-#define FPA0		0x06040
-#define FPA1		0x06044
-#define FPB0		0x06048
-#define FPB1		0x0604c
-# define FP_N_DIV_MASK				0x003f0000
-# define FP_N_DIV_SHIFT				16
-# define FP_M1_DIV_MASK				0x00003f00
-# define FP_M1_DIV_SHIFT			8
-# define FP_M2_DIV_MASK				0x0000003f
-# define FP_M2_DIV_SHIFT			0
+# define TV_VSYNC_START_F1_MASK		0x00007f00
+# define TV_VSYNC_START_F1_SHIFT	8
+/**
+ * Offset of the start of vsync in field 2, measured in one less than the
+ * number of half lines.
+ */
+# define TV_VSYNC_START_F2_MASK		0x0000007f
+# define TV_VSYNC_START_F2_SHIFT	0
+
+#define TV_V_CTL_3		0x68044
+/** Enables generation of the equalization signal */
+# define TV_EQUAL_ENA			(1 << 31)
+/** Length of vsync, in half lines */
+# define TV_VEQ_LEN_MASK		0x007f0000
+# define TV_VEQ_LEN_SHIFT		16
+/** Offset of the start of equalization in field 1, measured in one less than
+ * the number of half lines.
+ */
+# define TV_VEQ_START_F1_MASK		0x0007f00
+# define TV_VEQ_START_F1_SHIFT		8
+/**
+ * Offset of the start of equalization in field 2, measured in one less than
+ * the number of half lines.
+ */
+# define TV_VEQ_START_F2_MASK		0x000007f
+# define TV_VEQ_START_F2_SHIFT		0
 
+#define TV_V_CTL_4		0x68048
+/**
+ * Offset to start of vertical colorburst, measured in one less than the
+ * number of lines from vertical start.
+ */
+# define TV_VBURST_START_F1_MASK	0x003f0000
+# define TV_VBURST_START_F1_SHIFT	16
+/**
+ * Offset to the end of vertical colorburst, measured in one less than the
+ * number of lines from the start of NBR.
+ */
+# define TV_VBURST_END_F1_MASK		0x000000ff
+# define TV_VBURST_END_F1_SHIFT		0
 
-#define PORT_HOTPLUG_EN		0x61110
-# define SDVOB_HOTPLUG_INT_EN			(1 << 26)
-# define SDVOC_HOTPLUG_INT_EN			(1 << 25)
-# define TV_HOTPLUG_INT_EN			(1 << 18)
-# define CRT_HOTPLUG_INT_EN			(1 << 9)
-# define CRT_HOTPLUG_FORCE_DETECT		(1 << 3)
+#define TV_V_CTL_5		0x6804c
+/**
+ * Offset to start of vertical colorburst, measured in one less than the
+ * number of lines from vertical start.
+ */
+# define TV_VBURST_START_F2_MASK	0x003f0000
+# define TV_VBURST_START_F2_SHIFT	16
+/**
+ * Offset to the end of vertical colorburst, measured in one less than the
+ * number of lines from the start of NBR.
+ */
+# define TV_VBURST_END_F2_MASK		0x000000ff
+# define TV_VBURST_END_F2_SHIFT		0
 
-#define PORT_HOTPLUG_STAT	0x61114
-# define CRT_HOTPLUG_INT_STATUS			(1 << 11)
-# define TV_HOTPLUG_INT_STATUS			(1 << 10)
-# define CRT_HOTPLUG_MONITOR_MASK		(3 << 8)
-# define CRT_HOTPLUG_MONITOR_COLOR		(3 << 8)
-# define CRT_HOTPLUG_MONITOR_MONO		(2 << 8)
-# define CRT_HOTPLUG_MONITOR_NONE		(0 << 8)
-# define SDVOC_HOTPLUG_INT_STATUS		(1 << 7)
-# define SDVOB_HOTPLUG_INT_STATUS		(1 << 6)
+#define TV_V_CTL_6		0x68050
+/**
+ * Offset to start of vertical colorburst, measured in one less than the
+ * number of lines from vertical start.
+ */
+# define TV_VBURST_START_F3_MASK	0x003f0000
+# define TV_VBURST_START_F3_SHIFT	16
+/**
+ * Offset to the end of vertical colorburst, measured in one less than the
+ * number of lines from the start of NBR.
+ */
+# define TV_VBURST_END_F3_MASK		0x000000ff
+# define TV_VBURST_END_F3_SHIFT		0
 
-#define SDVOB			0x61140
-#define SDVOC			0x61160
-#define SDVO_ENABLE				(1 << 31)
-#define SDVO_PIPE_B_SELECT			(1 << 30)
-#define SDVO_STALL_SELECT			(1 << 29)
-#define SDVO_INTERRUPT_ENABLE			(1 << 26)
+#define TV_V_CTL_7		0x68054
 /**
- * 915G/GM SDVO pixel multiplier.
- *
- * Programmed value is multiplier - 1, up to 5x.
+ * Offset to start of vertical colorburst, measured in one less than the
+ * number of lines from vertical start.
+ */
+# define TV_VBURST_START_F4_MASK	0x003f0000
+# define TV_VBURST_START_F4_SHIFT	16
+/**
+ * Offset to the end of vertical colorburst, measured in one less than the
+ * number of lines from the start of NBR.
+ */
+# define TV_VBURST_END_F4_MASK		0x000000ff
+# define TV_VBURST_END_F4_SHIFT		0
+
+#define TV_SC_CTL_1		0x68060
+/** Turns on the first subcarrier phase generation DDA */
+# define TV_SC_DDA1_EN			(1 << 31)
+/** Turns on the first subcarrier phase generation DDA */
+# define TV_SC_DDA2_EN			(1 << 30)
+/** Turns on the first subcarrier phase generation DDA */
+# define TV_SC_DDA3_EN			(1 << 29)
+/** Sets the subcarrier DDA to reset frequency every other field */
+# define TV_SC_RESET_EVERY_2		(0 << 24)
+/** Sets the subcarrier DDA to reset frequency every fourth field */
+# define TV_SC_RESET_EVERY_4		(1 << 24)
+/** Sets the subcarrier DDA to reset frequency every eighth field */
+# define TV_SC_RESET_EVERY_8		(2 << 24)
+/** Sets the subcarrier DDA to never reset the frequency */
+# define TV_SC_RESET_NEVER		(3 << 24)
+/** Sets the peak amplitude of the colorburst.*/
+# define TV_BURST_LEVEL_MASK		0x00ff0000
+# define TV_BURST_LEVEL_SHIFT		16
+/** Sets the increment of the first subcarrier phase generation DDA */
+# define TV_SCDDA1_INC_MASK		0x00000fff
+# define TV_SCDDA1_INC_SHIFT		0
+
+#define TV_SC_CTL_2		0x68064
+/** Sets the rollover for the second subcarrier phase generation DDA */
+# define TV_SCDDA2_SIZE_MASK		0x7fff0000
+# define TV_SCDDA2_SIZE_SHIFT		16
+/** Sets the increent of the second subcarrier phase generation DDA */
+# define TV_SCDDA2_INC_MASK		0x00007fff
+# define TV_SCDDA2_INC_SHIFT		0
+
+#define TV_SC_CTL_3		0x68068
+/** Sets the rollover for the third subcarrier phase generation DDA */
+# define TV_SCDDA3_SIZE_MASK		0x7fff0000
+# define TV_SCDDA3_SIZE_SHIFT		16
+/** Sets the increent of the third subcarrier phase generation DDA */
+# define TV_SCDDA3_INC_MASK		0x00007fff
+# define TV_SCDDA3_INC_SHIFT		0
+
+#define TV_WIN_POS		0x68070
+/** X coordinate of the display from the start of horizontal active */
+# define TV_XPOS_MASK			0x1fff0000
+# define TV_XPOS_SHIFT			16
+/** Y coordinate of the display from the start of vertical active (NBR) */
+# define TV_YPOS_MASK			0x00000fff
+# define TV_YPOS_SHIFT			0
+
+#define TV_WIN_SIZE		0x68074
+/** Horizontal size of the display window, measured in pixels*/
+# define TV_XSIZE_MASK			0x1fff0000
+# define TV_XSIZE_SHIFT			16
+/**
+ * Vertical size of the display window, measured in pixels.
  *
- * \sa DPLL_MD_UDI_MULTIPLIER_MASK
+ * Must be even for interlaced modes.
  */
-#define SDVO_PORT_MULTIPLY_MASK			(7 << 23)
-#define SDVO_PORT_MULTIPLY_SHIFT		23
-#define SDVO_PHASE_SELECT_MASK			(15 << 19)
-#define SDVO_PHASE_SELECT_DEFAULT		(6 << 19)
-#define SDVO_CLOCK_OUTPUT_INVERT		(1 << 18)
-#define SDVOC_GANG_MODE				(1 << 16)
-#define SDVO_BORDER_ENABLE			(1 << 7)
-#define SDVOB_PCIE_CONCURRENCY			(1 << 3)
-#define SDVO_DETECTED				(1 << 2)
-/* Bits to be preserved when writing */
-#define SDVOB_PRESERVE_MASK			((1 << 17) | (1 << 16) | (1 << 14))
-#define SDVOC_PRESERVE_MASK			(1 << 17)
+# define TV_YSIZE_MASK			0x00000fff
+# define TV_YSIZE_SHIFT			0
 
-/** @defgroup LVDS
- * @{
- */
+#define TV_FILTER_CTL_1		0x68080
 /**
- * This register controls the LVDS output enable, pipe selection, and data
- * format selection.
+ * Enables automatic scaling calculation.
  *
- * All of the clock/data pairs are force powered down by power sequencing.
+ * If set, the rest of the registers are ignored, and the calculated values can
+ * be read back from the register.
  */
-#define LVDS			0x61180
+# define TV_AUTO_SCALE			(1 << 31)
 /**
- * Enables the LVDS port.  This bit must be set before DPLLs are enabled, as
- * the DPLL semantics change when the LVDS is assigned to that pipe.
+ * Disables the vertical filter.
+ *
+ * This is required on modes more than 1024 pixels wide */
+# define TV_V_FILTER_BYPASS		(1 << 29)
+/** Enables adaptive vertical filtering */
+# define TV_VADAPT			(1 << 28)
+# define TV_VADAPT_MODE_MASK		(3 << 26)
+/** Selects the least adaptive vertical filtering mode */
+# define TV_VADAPT_MODE_LEAST		(0 << 26)
+/** Selects the moderately adaptive vertical filtering mode */
+# define TV_VADAPT_MODE_MODERATE	(1 << 26)
+/** Selects the most adaptive vertical filtering mode */
+# define TV_VADAPT_MODE_MOST		(3 << 26)
+/**
+ * Sets the horizontal scaling factor.
+ *
+ * This should be the fractional part of the horizontal scaling factor divided
+ * by the oversampling rate.  TV_HSCALE should be less than 1, and set to:
+ *
+ * (src width - 1) / ((oversample * dest width) - 1)
  */
-# define LVDS_PORT_EN			(1 << 31)
-/** Selects pipe B for LVDS data.  Must be set on pre-965. */
-# define LVDS_PIPEB_SELECT		(1 << 30)
+# define TV_HSCALE_FRAC_MASK		0x00003fff
+# define TV_HSCALE_FRAC_SHIFT		0
 
+#define TV_FILTER_CTL_2		0x68084
 /**
- * Enables the A0-A2 data pairs and CLKA, containing 18 bits of color data per
- * pixel.
+ * Sets the integer part of the 3.15 fixed-point vertical scaling factor.
+ *
+ * TV_VSCALE should be (src height - 1) / ((interlace * dest height) - 1)
  */
-# define LVDS_A0A2_CLKA_POWER_MASK	(3 << 8)
-# define LVDS_A0A2_CLKA_POWER_DOWN	(0 << 8)
-# define LVDS_A0A2_CLKA_POWER_UP	(3 << 8)
+# define TV_VSCALE_INT_MASK		0x00038000
+# define TV_VSCALE_INT_SHIFT		15
 /**
- * Controls the A3 data pair, which contains the additional LSBs for 24 bit
- * mode.  Only enabled if LVDS_A0A2_CLKA_POWER_UP also indicates it should be
- * on.
+ * Sets the fractional part of the 3.15 fixed-point vertical scaling factor.
+ *
+ * \sa TV_VSCALE_INT_MASK
  */
-# define LVDS_A3_POWER_MASK		(3 << 6)
-# define LVDS_A3_POWER_DOWN		(0 << 6)
-# define LVDS_A3_POWER_UP		(3 << 6)
+# define TV_VSCALE_FRAC_MASK		0x00007fff
+# define TV_VSCALE_FRAC_SHIFT		0
+
+#define TV_FILTER_CTL_3		0x68088
 /**
- * Controls the CLKB pair.  This should only be set when LVDS_B0B3_POWER_UP
- * is set.
+ * Sets the integer part of the 3.15 fixed-point vertical scaling factor.
+ *
+ * TV_VSCALE should be (src height - 1) / (1/4 * (dest height - 1))
+ *
+ * For progressive modes, TV_VSCALE_IP_INT should be set to zeroes.
  */
-# define LVDS_CLKB_POWER_MASK		(3 << 4)
-# define LVDS_CLKB_POWER_DOWN		(0 << 4)
-# define LVDS_CLKB_POWER_UP		(3 << 4)
+# define TV_VSCALE_IP_INT_MASK		0x00038000
+# define TV_VSCALE_IP_INT_SHIFT		15
+/**
+ * Sets the fractional part of the 3.15 fixed-point vertical scaling factor.
+ *
+ * For progressive modes, TV_VSCALE_IP_INT should be set to zeroes.
+ *
+ * \sa TV_VSCALE_IP_INT_MASK
+ */
+# define TV_VSCALE_IP_FRAC_MASK		0x00007fff
+# define TV_VSCALE_IP_FRAC_SHIFT		0
 
+#define TV_CC_CONTROL		0x68090
+# define TV_CC_ENABLE			(1 << 31)
 /**
- * Controls the B0-B3 data pairs.  This must be set to match the DPLL p2
- * setting for whether we are in dual-channel mode.  The B3 pair will
- * additionally only be powered up when LVDS_A3_POWER_UP is set.
+ * Specifies which field to send the CC data in.
+ *
+ * CC data is usually sent in field 0.
+ */
+# define TV_CC_FID_MASK			(1 << 27)
+# define TV_CC_FID_SHIFT		27
+/** Sets the horizontal position of the CC data.  Usually 135. */
+# define TV_CC_HOFF_MASK		0x03ff0000
+# define TV_CC_HOFF_SHIFT		16
+/** Sets the vertical position of the CC data.  Usually 21 */
+# define TV_CC_LINE_MASK		0x0000003f
+# define TV_CC_LINE_SHIFT		0
+
+#define TV_CC_DATA		0x68094
+# define TV_CC_RDY			(1 << 31)
+/** Second word of CC data to be transmitted. */
+# define TV_CC_DATA_2_MASK		0x007f0000
+# define TV_CC_DATA_2_SHIFT		16
+/** First word of CC data to be transmitted. */
+# define TV_CC_DATA_1_MASK		0x0000007f
+# define TV_CC_DATA_1_SHIFT		0
+
+#define TV_H_LUMA_0		0x68100
+#define TV_H_LUMA_59		0x681ec
+#define TV_H_CHROMA_0		0x68200
+#define TV_H_CHROMA_59		0x682ec
+#define TV_V_LUMA_0		0x68300
+#define TV_V_LUMA_42		0x683a8
+#define TV_V_CHROMA_0		0x68400
+#define TV_V_CHROMA_42		0x684a8
+
+/* Display & cursor control */
+
+/* Pipe A */
+#define PIPEADSL		0x70000
+#define PIPEACONF		 0x70008
+#define   PIPEACONF_ENABLE	(1<<31)
+#define   PIPEACONF_DISABLE	0
+#define   PIPEACONF_DOUBLE_WIDE	(1<<30)
+#define   I965_PIPECONF_ACTIVE	(1<<30)
+#define   PIPEACONF_SINGLE_WIDE	0
+#define   PIPEACONF_PIPE_UNLOCKED 0
+#define   PIPEACONF_PIPE_LOCKED	(1<<25)
+#define   PIPEACONF_PALETTE	0
+#define   PIPEACONF_GAMMA		(1<<24)
+#define   PIPECONF_FORCE_BORDER	(1<<25)
+#define   PIPECONF_PROGRESSIVE	(0 << 21)
+#define   PIPECONF_INTERLACE_W_FIELD_INDICATION	(6 << 21)
+#define   PIPECONF_INTERLACE_FIELD_0_ONLY		(7 << 21)
+#define PIPEASTAT		0x70024
+#define   PIPE_FIFO_UNDERRUN_STATUS		(1UL<<31)
+#define   PIPE_CRC_ERROR_ENABLE			(1UL<<29)
+#define   PIPE_CRC_DONE_ENABLE			(1UL<<28)
+#define   PIPE_GMBUS_EVENT_ENABLE		(1UL<<27)
+#define   PIPE_HOTPLUG_INTERRUPT_ENABLE		(1UL<<26)
+#define   PIPE_VSYNC_INTERRUPT_ENABLE		(1UL<<25)
+#define   PIPE_DISPLAY_LINE_COMPARE_ENABLE	(1UL<<24)
+#define   PIPE_DPST_EVENT_ENABLE		(1UL<<23)
+#define   PIPE_LEGACY_BLC_EVENT_ENABLE		(1UL<<22)
+#define   PIPE_ODD_FIELD_INTERRUPT_ENABLE	(1UL<<21)
+#define   PIPE_EVEN_FIELD_INTERRUPT_ENABLE	(1UL<<20)
+#define   PIPE_HOTPLUG_TV_INTERRUPT_ENABLE	(1UL<<18) /* pre-965 */
+#define   PIPE_START_VBLANK_INTERRUPT_ENABLE	(1UL<<18) /* 965 or later */
+#define   PIPE_VBLANK_INTERRUPT_ENABLE		(1UL<<17)
+#define   PIPE_OVERLAY_UPDATED_ENABLE		(1UL<<16)
+#define   PIPE_CRC_ERROR_INTERRUPT_STATUS	(1UL<<13)
+#define   PIPE_CRC_DONE_INTERRUPT_STATUS	(1UL<<12)
+#define   PIPE_GMBUS_INTERRUPT_STATUS		(1UL<<11)
+#define   PIPE_HOTPLUG_INTERRUPT_STATUS		(1UL<<10)
+#define   PIPE_VSYNC_INTERRUPT_STATUS		(1UL<<9)
+#define   PIPE_DISPLAY_LINE_COMPARE_STATUS	(1UL<<8)
+#define   PIPE_DPST_EVENT_STATUS		(1UL<<7)
+#define   PIPE_LEGACY_BLC_EVENT_STATUS		(1UL<<6)
+#define   PIPE_ODD_FIELD_INTERRUPT_STATUS	(1UL<<5)
+#define   PIPE_EVEN_FIELD_INTERRUPT_STATUS	(1UL<<4)
+#define   PIPE_HOTPLUG_TV_INTERRUPT_STATUS	(1UL<<2) /* pre-965 */
+#define   PIPE_START_VBLANK_INTERRUPT_STATUS	(1UL<<2) /* 965 or later */
+#define   PIPE_VBLANK_INTERRUPT_STATUS		(1UL<<1)
+#define   PIPE_OVERLAY_UPDATED_STATUS		(1UL<<0)
+
+#define DSPARB			0x70030
+#define   DSPARB_CSTART_MASK	(0x7f << 7)
+#define   DSPARB_CSTART_SHIFT	7
+#define   DSPARB_BSTART_MASK	(0x7f)		 
+#define   DSPARB_BSTART_SHIFT	0
+/*
+ * The two pipe frame counter registers are not synchronized, so
+ * reading a stable value is somewhat tricky. The following code 
+ * should work:
+ *
+ *  do {
+ *    high1 = ((INREG(PIPEAFRAMEHIGH) & PIPE_FRAME_HIGH_MASK) >>
+ *             PIPE_FRAME_HIGH_SHIFT;
+ *    low1 =  ((INREG(PIPEAFRAMEPIXEL) & PIPE_FRAME_LOW_MASK) >>
+ *             PIPE_FRAME_LOW_SHIFT);
+ *    high2 = ((INREG(PIPEAFRAMEHIGH) & PIPE_FRAME_HIGH_MASK) >>
+ *             PIPE_FRAME_HIGH_SHIFT);
+ *  } while (high1 != high2);
+ *  frame = (high1 << 8) | low1;
  */
-# define LVDS_B0B3_POWER_MASK		(3 << 2)
-# define LVDS_B0B3_POWER_DOWN		(0 << 2)
-# define LVDS_B0B3_POWER_UP		(3 << 2)
-
-#define PIPEACONF 0x70008
-#define PIPEACONF_ENABLE	(1<<31)
-#define PIPEACONF_DISABLE	0
-#define PIPEACONF_DOUBLE_WIDE	(1<<30)
-#define I965_PIPECONF_ACTIVE	(1<<30)
-#define PIPEACONF_SINGLE_WIDE	0
-#define PIPEACONF_PIPE_UNLOCKED 0
-#define PIPEACONF_PIPE_LOCKED	(1<<25)
-#define PIPEACONF_PALETTE	0
-#define PIPEACONF_GAMMA		(1<<24)
-#define PIPECONF_FORCE_BORDER	(1<<25)
-#define PIPECONF_PROGRESSIVE	(0 << 21)
-#define PIPECONF_INTERLACE_W_FIELD_INDICATION	(6 << 21)
-#define PIPECONF_INTERLACE_FIELD_0_ONLY		(7 << 21)
-
-#define DSPARB	  0x70030
-#define DSPARB_CSTART_MASK	(0x7f << 7)
-#define DSPARB_CSTART_SHIFT	7
-#define DSPARB_BSTART_MASK	(0x7f)		 
-#define DSPARB_BSTART_SHIFT	0
-
-#define PIPEBCONF 0x71008
-#define PIPEBCONF_ENABLE	(1<<31)
-#define PIPEBCONF_DISABLE	0
-#define PIPEBCONF_DOUBLE_WIDE	(1<<30)
-#define PIPEBCONF_DISABLE	0
-#define PIPEBCONF_GAMMA		(1<<24)
-#define PIPEBCONF_PALETTE	0
-
-#define PIPEBGCMAXRED		0x71010
-#define PIPEBGCMAXGREEN		0x71014
-#define PIPEBGCMAXBLUE		0x71018
+#define PIPEAFRAMEHIGH          0x70040
+#define   PIPE_FRAME_HIGH_MASK    0x0000ffff
+#define   PIPE_FRAME_HIGH_SHIFT   0
+#define PIPEAFRAMEPIXEL         0x70044
+#define   PIPE_FRAME_LOW_MASK     0xff000000
+#define   PIPE_FRAME_LOW_SHIFT    24
+#define   PIPE_PIXEL_MASK         0x00ffffff
+#define   PIPE_PIXEL_SHIFT        0
+
+/* Cursor A & B regs */
+#define CURACNTR		0x70080
+#define   CURSOR_MODE_DISABLE   0x00
+#define   CURSOR_MODE_64_32B_AX 0x07
+#define   CURSOR_MODE_64_ARGB_AX ((1 << 5) | CURSOR_MODE_64_32B_AX)
+#define   MCURSOR_GAMMA_ENABLE  (1 << 26)
+#define CURABASE		0x70084
+#define CURAPOS			0x70088
+#define   CURSOR_POS_MASK       0x007FF
+#define   CURSOR_POS_SIGN       0x8000
+#define   CURSOR_X_SHIFT        0
+#define   CURSOR_Y_SHIFT        16
+#define CURBCNTR		0x700c0
+#define CURBBASE		0x700c4
+#define CURBPOS			0x700c8
+
+/* Display A control */
+#define DSPACNTR                0x70180
+#define   DISPLAY_PLANE_ENABLE			(1<<31)
+#define   DISPLAY_PLANE_DISABLE			0
+#define   DISPPLANE_GAMMA_ENABLE		(1<<30)
+#define   DISPPLANE_GAMMA_DISABLE		0
+#define   DISPPLANE_PIXFORMAT_MASK		(0xf<<26)
+#define   DISPPLANE_8BPP			(0x2<<26)
+#define   DISPPLANE_15_16BPP			(0x4<<26)
+#define   DISPPLANE_16BPP			(0x5<<26)
+#define   DISPPLANE_32BPP_NO_ALPHA		(0x6<<26)
+#define   DISPPLANE_32BPP			(0x7<<26)
+#define   DISPPLANE_STEREO_ENABLE		(1<<25)
+#define   DISPPLANE_STEREO_DISABLE		0
+#define   DISPPLANE_SEL_PIPE_MASK		(1<<24)
+#define   DISPPLANE_SEL_PIPE_A			0
+#define   DISPPLANE_SEL_PIPE_B			(1<<24)
+#define   DISPPLANE_SRC_KEY_ENABLE		(1<<22)
+#define   DISPPLANE_SRC_KEY_DISABLE		0
+#define   DISPPLANE_LINE_DOUBLE			(1<<20)
+#define   DISPPLANE_NO_LINE_DOUBLE		0
+#define   DISPPLANE_STEREO_POLARITY_FIRST	0
+#define   DISPPLANE_STEREO_POLARITY_SECOND	(1<<18)
+#define DSPAADDR		0x70184
+#define DSPASTRIDE		0x70188
+#define DSPAPOS			0x7018C /* reserved */
+#define DSPASIZE		0x70190
+#define DSPASURF		0x7019C /* 965+ only */
+#define DSPATILEOFF		0x701A4 /* 965+ only */
+
+/* VBIOS flags */
+#define SWF00			0x71410
+#define SWF01			0x71414
+#define SWF02			0x71418
+#define SWF03			0x7141c
+#define SWF04			0x71420
+#define SWF05			0x71424
+#define SWF06			0x71428
+#define SWF10			0x70410
+#define SWF11			0x70414
+#define SWF14			0x71420
+#define SWF30			0x72414
+#define SWF31			0x72418
+#define SWF32			0x7241c
+
+/* Pipe B */
+#define PIPEBDSL		0x71000
+#define PIPEBCONF		0x71008
 #define PIPEBSTAT		0x71024
 #define PIPEBFRAMEHIGH		0x71040
 #define PIPEBFRAMEPIXEL		0x71044
 
-#define DSPACNTR		0x70180
+/* Display B control */
 #define DSPBCNTR		0x71180
-#define DISPLAY_PLANE_ENABLE			(1<<31)
-#define DISPLAY_PLANE_DISABLE			0
-#define DISPPLANE_GAMMA_ENABLE			(1<<30)
-#define DISPPLANE_GAMMA_DISABLE			0
-#define DISPPLANE_PIXFORMAT_MASK		(0xf<<26)
-#define DISPPLANE_8BPP				(0x2<<26)
-#define DISPPLANE_15_16BPP			(0x4<<26)
-#define DISPPLANE_16BPP				(0x5<<26)
-#define DISPPLANE_32BPP_NO_ALPHA		(0x6<<26)
-#define DISPPLANE_32BPP				(0x7<<26)
-#define DISPPLANE_STEREO_ENABLE			(1<<25)
-#define DISPPLANE_STEREO_DISABLE		0
-#define DISPPLANE_SEL_PIPE_MASK			(1<<24)
-#define DISPPLANE_SEL_PIPE_A			0
-#define DISPPLANE_SEL_PIPE_B			(1<<24)
-#define DISPPLANE_SRC_KEY_ENABLE		(1<<22)
-#define DISPPLANE_SRC_KEY_DISABLE		0
-#define DISPPLANE_LINE_DOUBLE			(1<<20)
-#define DISPPLANE_NO_LINE_DOUBLE		0
-#define DISPPLANE_STEREO_POLARITY_FIRST		0
-#define DISPPLANE_STEREO_POLARITY_SECOND	(1<<18)
-/* plane B only */
-#define DISPPLANE_ALPHA_TRANS_ENABLE		(1<<15)
-#define DISPPLANE_ALPHA_TRANS_DISABLE		0
-#define DISPPLANE_SPRITE_ABOVE_DISPLAYA		0
-#define DISPPLANE_SPRITE_ABOVE_OVERLAY		(1)
-
-#define DSPABASE		0x70184
-#define DSPASTRIDE		0x70188
-
-#define DSPBBASE		0x71184
-#define DSPBADDR		DSPBBASE
+#define   DISPPLANE_ALPHA_TRANS_ENABLE		(1<<15)
+#define   DISPPLANE_ALPHA_TRANS_DISABLE		0
+#define   DISPPLANE_SPRITE_ABOVE_DISPLAY	0
+#define   DISPPLANE_SPRITE_ABOVE_OVERLAY	(1)
+#define DSPBADDR		0x71184
 #define DSPBSTRIDE		0x71188
-
-#define DSPAKEYVAL		0x70194
-#define DSPAKEYMASK		0x70198
-
-#define DSPAPOS			0x7018C /* reserved */
-#define DSPASIZE		0x70190
 #define DSPBPOS			0x7118C
 #define DSPBSIZE		0x71190
-
-#define DSPASURF		0x7019C
-#define DSPATILEOFF		0x701A4
-
 #define DSPBSURF		0x7119C
 #define DSPBTILEOFF		0x711A4
 
+/* VBIOS regs */
 #define VGACNTRL		0x71400
 # define VGA_DISP_DISABLE			(1 << 31)
 # define VGA_2X_MODE				(1 << 30)
 # define VGA_PIPE_B_SELECT			(1 << 29)
 
-/*
- * Some BIOS scratch area registers.  The 845 (and 830?) store the amount
- * of video memory available to the BIOS in SWF1.
- */
-
-#define SWF0			0x71410
-
-/*
- * 855 scratch registers.
- */
-#define SWF10			0x70410
-
-#define SWF30			0x72414
-
-/*
- * Overlay registers.  These are overlay registers accessed via MMIO.
- * Those loaded via the overlay register page are defined in i830_video.c.
- */
-#define OVADD			0x30000
-
-#define DOVSTA			0x30008
-#define OC_BUF			(0x3<<20)
-
-#define OGAMC5			0x30010
-#define OGAMC4			0x30014
-#define OGAMC3			0x30018
-#define OGAMC2			0x3001c
-#define OGAMC1			0x30020
-#define OGAMC0			0x30024
-/*
- * Palette registers
- */
-#define PALETTE_A		0x0a000
-#define PALETTE_B		0x0a800
+/* Chipset type macros */
 
 #define IS_I830(dev) ((dev)->pci_device == 0x3577)
 #define IS_845G(dev) ((dev)->pci_device == 0x2562)
@@ -1318,6 +1819,4 @@ extern int i915_wait_ring(struct drm_device * dev, int n, const char *caller);
 
 #define I915_NEED_GFX_HWS(dev) (IS_G33(dev) || IS_IGD_GM(dev) || IS_G4X(dev))
 
-#define PRIMARY_RINGBUFFER_SIZE         (128*1024)
-
 #endif