Clean up warnings about unused variables and functions.

3 files changed, 4 insertions, 43 deletions

diff --git a/linux-core/xgi_drv.c b/linux-core/xgi_drv.c
index 0c37d00e..75204283 100644
--- a/linux-core/xgi_drv.c
+++ b/linux-core/xgi_drv.c
@@ -153,11 +153,6 @@ static inline void xgi_check_pci_config(xgi_info_t * info, int line)
 		pci_write_config_word(info->dev, PCI_COMMAND, cmd);
 }
 
-static int xgi_post_vbios(xgi_ioctl_post_vbios_t * info)
-{
-	return 1;
-}
-
 /*
  * struct pci_device_id {
  *  unsigned int vendor, device;        // Vendor and device ID or PCI_ANY_ID
@@ -1484,14 +1479,8 @@ static int __init xgi_init_module(void)
 void __exit xgi_exit_module(void)
 {
 	int i;
-	xgi_info_t *info, *max_devices;
 
 #ifdef CONFIG_DEVFS_FS
-	/*
-	   XGI_DEVFS_REMOVE_CONTROL();
-	   for (i = 0; i < XGI_MAX_DEVICES; i++)
-	   XGI_DEVFS_REMOVE_DEVICE(i);
-	 */
 	XGI_DEVFS_REMOVE_DEVICE(xgi_num_devices);
 #endif
 
diff --git a/linux-core/xgi_misc.c b/linux-core/xgi_misc.c
index 06cf0160..8d0e81b6 100644
--- a/linux-core/xgi_misc.c
+++ b/linux-core/xgi_misc.c
@@ -131,7 +131,7 @@ BOOL xgi_ge_irq_handler(xgi_info_t * info)
 				BOOL is_wrong_signal = FALSE;
 				static U32 last_int_tick_low,
 				    last_int_tick_high;
-				static U32 new_int_tick_low, new_int_tick_high;
+				static U32 new_int_tick_low;
 				static U32 continoue_int_count = 0;
 				// OE II is busy.
 				while (old_ge_status & 0x001c0000) {
@@ -290,9 +290,6 @@ BOOL xgi_ge_irq_handler(xgi_info_t * info)
 BOOL xgi_crt_irq_handler(xgi_info_t * info)
 {
 	BOOL ret = FALSE;
-	U8 *mmio_vbase = info->mmio.vbase;
-	U32 device_status = 0;
-	U32 hw_status = 0;
 	U8 save_3ce = bReadReg(0x3ce);
 
 	if (bIn3cf(0x37) & 0x01)	// CRT1 interrupt just happened
@@ -303,15 +300,6 @@ BOOL xgi_crt_irq_handler(xgi_info_t * info)
 		// What happened?
 		op3cf_37 = bIn3cf(0x37);
 
-#if 0
-		if (op3cf_37 & 0x04)
-			device_status |= GDEVST_CONNECT;
-		else
-			device_status &= ~GDEVST_CONNECT;
-
-		device_status |= GDEVST_DEVICE_CHANGED;
-		hw_status |= HWST_DEVICE_CHANGED;
-#endif
 		// Clear CRT interrupt
 		op3cf_3d = bIn3cf(0x3d);
 		bOut3cf(0x3d, (op3cf_3d | 0x04));
@@ -326,9 +314,6 @@ BOOL xgi_crt_irq_handler(xgi_info_t * info)
 BOOL xgi_dvi_irq_handler(xgi_info_t * info)
 {
 	BOOL ret = FALSE;
-	U8 *mmio_vbase = info->mmio.vbase;
-	U32 device_status = 0;
-	U32 hw_status = 0;
 	U8 save_3ce = bReadReg(0x3ce);
 
 	if (bIn3cf(0x38) & 0x20)	// DVI interrupt just happened
@@ -340,28 +325,13 @@ BOOL xgi_dvi_irq_handler(xgi_info_t * info)
 
 		// What happened?
 		op3cf_37 = bIn3cf(0x37);
-#if 0
-		//Also update our internal flag
-		if (op3cf_37 & 0x10)	// Second Monitor plugged In
-		{
-			device_status |= GDEVST_CONNECT;
-			//Because currenly we cannot determine if DVI digital
-			//or DVI analog is connected according to DVI interrupt
-			//We should still call BIOS to check it when utility ask us
-			device_status &= ~GDEVST_CHECKED;
-		} else {
-			device_status &= ~GDEVST_CONNECT;
-		}
-#endif
+
 		//Notify BIOS that DVI plug/unplug happened
 		op3x5_5a = bIn3x5(0x5a);
 		bOut3x5(0x5a, op3x5_5a & 0xf7);
 
 		bWriteReg(0x3d4, save_3x4);
 
-		//device_status |= GDEVST_DEVICE_CHANGED;
-		//hw_status |= HWST_DEVICE_CHANGED;
-
 		// Clear DVI interrupt
 		op3cf_39 = bIn3cf(0x39);
 		bOut3c5(0x39, (op3cf_39 & ~0x01));	//Set 3cf.39 bit 0 to 0
diff --git a/linux-core/xgi_pcie.c b/linux-core/xgi_pcie.c
index 9457770a..8b024e4a 100644
--- a/linux-core/xgi_pcie.c
+++ b/linux-core/xgi_pcie.c
@@ -350,8 +350,10 @@ void xgi_pcie_heap_check(void)
 	struct list_head *useList, *temp;
 	xgi_pcie_block_t *block;
 	unsigned int ownerIndex;
+#ifdef XGI_DEBUG
 	char *ownerStr[6] =
 	    { "2D", "3D", "3D_CMD", "3D_SCR", "3D_TEX", "ELSE" };
+#endif
 
 	if (xgi_pcie_heap) {
 		useList = &xgi_pcie_heap->used_list;