478 & 15 Mar 2015 & Cornelia Huck & {VIRTIO-129: legacy:
clean up virtqueue layout definitions

Generalize "Legacy Interfaces: A Note on Virtqueue Layout" to allow
for different alignment requirements. Have pci and ccw refer to that
section for legacy devices. Remove the double definition of virtqueue
alignment (which referred to legacy, but was not tagged as such) from
the ccw section.
See \ref{sec:Basic Facilities of a Virtio Device / Virtqueues /
Legacy Interfaces: A Note on Virtqueue Layout}, \ref{sec:Virtio
Transport Options / Virtio Over PCI Bus / PCI-specific
Initialization And Device Operation / Device Initialization /
Virtqueue Configuration / Legacy Interface: A Note on Virtqueue
Configuration} and \ref{sec:Virtio Transport Options / Virtio
over channel I/O / Device Initialization / Configuring a
Virtqueue / Legacy Interface: A Note on Configuring a Virtqueue}.
 } \\
\hline
479 & 15 Mar 2015 & Cornelia Huck & {VIRTIO-118:
ccw: clarify basic channel commands

"Basic channel commands" seems to be not as clear as it
could, so let's spell out which channel commands we refer to.
See \ref{sec:Virtio Transport Options / Virtio over channel I/O /
Basic Concepts}.
} \\
\hline
479 & 15 Mar 2015 & Cornelia Huck & {VIRTIO-116:
ccw: allow WRITE_STATUS to fail
    
We want to be able to fail setting a status on the device
(e.g.  FEATURES_OK if the device can't work with the features
negotiated).
The easiest way to do that is to allow the device to fail the
WRITE_STATUS command by posting a command reject.
See \ref{sec:Virtio Transport Options / Virtio over channel I/O /
Device Initialization / Communicating Status Information}.
 } \\
\hline
485 & 15 Mar 2015 & Jason Wang & {VIRTIO-135:
virtio-ring: comment fixup
    
virtio_ring.h included with spec has this text:
/* Support for avail_idx and used_idx fields */
it should really refer to avail_event and used_event.
See Appendix \ref{sec:virtio-ring.h}.
 } \\
\hline
486 & 15 Mar 2015 & Jason Wang & {VIRTIO-136:
document idx field in virtqueue used ring

Section \ref{sec:Basic Facilities of a Virtio Device / Virtqueues
/ The Virtqueue Used Ring} The Virtqueue Used Ring
listed the idx field, but never documented it.
See \ref{sec:Basic Facilities of a Virtio Device / Virtqueues /
The Virtqueue Used Ring}.
 } \\
\hline
487 & 15 Mar 2015 & Rusty Russell & {VIRTIO-130:
ISR status: Fix incorrect diagram

ISR status capability diagram has the "Device Configuration
Interrupt " as bit 0, and the "Queue Interrupt" as bit 1. This is
the wrong way around: it disagrees with the legacy
implementations, as well as the spec elsewhere.

All current guests correctly follow the text, fix
up the diagram to match.
See \ref{sec:Virtio Transport Options / Virtio Over PCI Bus / PCI
Device Layout / ISR status capability}.
 } \\
\hline
488 & 15 Mar 2015 & Rusty Russell & {VIRTIO-133:
Change 4.1.5.1.2.1 to device requirement

4.1.5.1.2.1 is incorrectly labelled as a driver requirement; it's
self-evidently referring to the device.
See \ref{sec:Conformance / Driver Conformance / PCI Driver
Conformance}, \ref{sec:Conformance / Device Conformance / PCI
Device Conformance} and \ref{devicenormative:Virtio
Transport Options / Virtio Over PCI Bus / PCI-specific
Initialization And Device Operation / Device Initialization /
Non-transitional Device With Legacy Driver}.
 } \\
\hline