From 77341328085fc39017b461fe42cf92e831e76ea4 Mon Sep 17 00:00:00 2001 From: mstsirkin Date: Fri, 30 Aug 2013 11:04:23 +0000 Subject: formatting: fix more xrefs Text had some xrefs in the form [sub:text]. These point nowhere, find the target making most sense and make them point there. Signed-off-by: Michael S. Tsirkin git-svn-id: https://tools.oasis-open.org/version-control/svn/virtio@26 0c8fb4dd-22a2-4bb5-bc14-6c75a5f43652 --- virtio-v1.0-wd01-part1-specification.txt | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) (limited to 'virtio-v1.0-wd01-part1-specification.txt') diff --git a/virtio-v1.0-wd01-part1-specification.txt b/virtio-v1.0-wd01-part1-specification.txt index 9e63e0e..79731ef 100644 --- a/virtio-v1.0-wd01-part1-specification.txt +++ b/virtio-v1.0-wd01-part1-specification.txt @@ -876,7 +876,7 @@ configuration space. The following list presents their layout: to (HostFeaturesSel*32)+31, eg. feature bits 0 to 31 if HostFeaturesSel is set to 0 and features bits 32 to 63 if - HostFeaturesSel is set to 1. Also see [sub:Feature-Bits] + HostFeaturesSel is set to 1. Also see "2.1.2. Feature Bits". • 0x014 | W | HostFeaturesSel Device (Host) features word selection. @@ -893,7 +893,7 @@ configuration space. The following list presents their layout: register. Access to this register sets bits GuestFeaturesSel*32 to (GuestFeaturesSel*32)+31, eg. feature bits 0 to 31 if GuestFeaturesSel is set to 0 and features bits 32 to 63 if - GuestFeaturesSel is set to 1. Also see [sub:Feature-Bits] + GuestFeaturesSel is set to 1. Also see "2.1.2. Feature Bits". • 0x024 | W | GuestFeaturesSel Activated (Guest) features word selection. @@ -983,7 +983,7 @@ Reading from this register returns a bit mask of interrupts Writing non-zero values to this register sets the status flags, indicating the Guest progress. Writing zero (0x0) to this register triggers a device reset. - Also see [sub:Device-Initialization-Sequence] + Also see "2.2.1. Device Initialization". • 0x100+ | RW | Config Device-specific configuration space starts at an offset 0x100 @@ -1338,8 +1338,8 @@ least the size of the struct virtio_net_hdr. When a packet is copied into a buffer in the receiveq, the optimal path is to disable further interrupts for the receiveq -(see [sub:Receiving-Used-Buffers]) and process packets until no -more are found, then re-enable them. +(see 2.2.2.2. Receiving Used Buffers From The Device) and process +packets until no more are found, then re-enable them. Processing packet involves: -- cgit v1.2.3