From 67b4254c6349dd63dd8eebfc3e52801d01a89044 Mon Sep 17 00:00:00 2001 From: rusty Date: Mon, 3 Mar 2014 01:57:32 +0000 Subject: Formatting: use latex-style quoting everywhere. Doesn't look any different, but consistent. Signed-off-by: Rusty Russell git-svn-id: https://tools.oasis-open.org/version-control/svn/virtio@310 0c8fb4dd-22a2-4bb5-bc14-6c75a5f43652 --- abstract.tex | 2 +- content.tex | 44 ++++++++++++++++++++++---------------------- introduction.tex | 2 +- title.tex | 6 +++--- virtio.tex | 2 +- 5 files changed, 28 insertions(+), 28 deletions(-) diff --git a/abstract.tex b/abstract.tex index 9651724..3e87d2f 100644 --- a/abstract.tex +++ b/abstract.tex @@ -1,4 +1,4 @@ -This document describes the specifications of the “virtio” family of +This document describes the specifications of the ``virtio'' family of devices. These devices are found in virtual environments, yet by design they look like physical devices to the guest within the virtual machine - and this diff --git a/content.tex b/content.tex index 1d06aa4..a509b20 100644 --- a/content.tex +++ b/content.tex @@ -651,7 +651,7 @@ Device Initialization / Read feature bits} Read device feature bits, and write t device's virtio configuration space, and population of virtqueues. \item\label{itm:General Initialization And Device Operation / Device Initialization / Set DRIVER-OK} Set the DRIVER_OK status bit. At this point the device is - "live". + ``live''. \end{enumerate} If any of these steps go irrecoverably wrong, the driver SHOULD @@ -883,7 +883,7 @@ exposed in the available ring (and not marked consumed by the device in the used ring) of a live virtqueue. A driver MUST NOT decrement the available \field{idx} on a live virtqueue (ie. -there is no way to "unexpose" buffers). +there is no way to ``unexpose'' buffers). Thus a driver MUST ensure a virtqueue isn't live (by device reset) before removing exposed buffers. @@ -954,7 +954,7 @@ All 32-bit and 16-bit fields are little-endian. \drivernormative{\subsubsection}{PCI Device Layout}{Virtio Transport Options / Virtio Over PCI Bus / PCI Device Layout} The driver -MUST access each field using the “natural” access method, i.e. +MUST access each field using the ``natural'' access method, i.e. 32-bit accesses for 32-bit fields, 16-bit accesses for 16-bit fields and 8-bit accesses for 8-bit fields. @@ -1410,7 +1410,7 @@ I/O region of the PCI device, as documented below. When using the legacy interface the driver MAY access the device-specific region using any width accesses, and a transitional device MUST present driver with the same results as -when accessed using the “natural” access method (i.e. +when accessed using the ``natural'' access method (i.e. 32-bit accesses for 32-bit fields, etc). Note that this is possible because while the virtio common configuration structure is PCI @@ -1748,7 +1748,7 @@ The driver interrupt handler would typically: Virtual environments without PCI support (a common situation in embedded devices models) might use simple memory mapped device -("virtio-mmio") instead of the PCI device. +(``virtio-mmio'') instead of the PCI device. The memory mapped virtio device behaviour is based on the PCI device specification. Therefore most of operations like device @@ -1805,7 +1805,7 @@ All register values are organized as Little Endian. \endlastfoot \mmioreg{MagicValue}{Magic value}{0x000}{R}{% 0x74726976 - (a Little Endian equivalent of the "virt" string). + (a Little Endian equivalent of the ``virt'' string). } \hline \mmioreg{Version}{Device version number}{0x004}{R}{% @@ -2818,7 +2818,7 @@ features. \begin{description} \item[VIRTIO_NET_F_CSUM (0)] Device handles packets with partial checksum. This - “checksum offload” is a common feature on modern network cards. + ``checksum offload'' is a common feature on modern network cards. \item[VIRTIO_NET_F_GUEST_CSUM (1)] Driver handles packets with partial checksum. @@ -2935,7 +2935,7 @@ A driver SHOULD negotiate VIRTIO_NET_F_MAC if the device offers it. If the driver negotiates the VIRTIO_NET_F_MAC feature, the driver MUST set the physical address of the NIC to \field{mac}. Otherwise, it SHOULD use a locally-administered MAC address (see \hyperref[intro:IEEE 802]{IEEE 802}, -"9.2 48-bit universal LAN MAC addresses"). +``9.2 48-bit universal LAN MAC addresses''). If the driver does not negotiate the VIRTIO_NET_F_STATUS feature, it SHOULD assume the link is active, otherwise it SHOULD read the link status from @@ -2970,7 +2970,7 @@ A driver would perform a typical initialization routine like so: number of the transmit and receive queues to use. \item If the VIRTIO_NET_F_MAC feature bit is set, the configuration - space \field{mac} entry indicates the “physical” address of the + space \field{mac} entry indicates the ``physical'' address of the network card, otherwise the driver would typically generate a random local MAC address. @@ -4399,7 +4399,7 @@ followed by four zero bytes. With this representation, a virtio-scsi device can serve up to 256 targets and 16384 LUNs per target. -\field{id} is the command identifier (“tag”). +\field{id} is the command identifier (``tag''). \field{task_attr} defines the task attribute as in the table above, but all task attributes @@ -4415,7 +4415,7 @@ taken from the configuration space. \field{sense} and subsequent fields are always device-writable. \field{sense_len} indicates the number of bytes actually written to the sense buffer. \field{residual} indicates the residual size, -calculated as “data_length - number_of_transferred_bytes”, for +calculated as ``data_length - number_of_transferred_bytes'', for read or write operations. For bidirectional commands, the number_of_transferred_bytes includes both read and written bytes. A \field{residual} that is less than the size of \field{datain} means that @@ -4434,7 +4434,7 @@ following: \item[VIRTIO_SCSI_S_OK] when the request was completed and the \field{status} byte is filled with a SCSI status code (not necessarily - "GOOD"). + ``GOOD''). \item[VIRTIO_SCSI_S_OVERRUN] if the content of the CDB requires transferring more data than is available in the data buffers. @@ -4639,7 +4639,7 @@ them. For this reason, placing 10-15 buffers on the event queue should be enough. Buffers returned by the device on the eventq will be referred to -as "events" in the rest of this section. Events have the +as ``events'' in the rest of this section. Events have the following format: \begin{lstlisting} @@ -4701,18 +4701,18 @@ contents of \field{event}. The following events are defined: above: \begin{description} - \item[VIRTIO_SCSI_EVT_RESET_REMOVED] (“LUN/target removed”) is used + \item[VIRTIO_SCSI_EVT_RESET_REMOVED] (``LUN/target removed'') is used if the target or logical unit is no longer able to receive commands. - \item[VIRTIO_SCSI_EVT_RESET_HARD] (“LUN hard reset”) is used if the + \item[VIRTIO_SCSI_EVT_RESET_HARD] (``LUN hard reset'') is used if the logical unit has been reset, but is still present. - \item[VIRTIO_SCSI_EVT_RESET_RESCAN] (“rescan LUN/target”) is used if + \item[VIRTIO_SCSI_EVT_RESET_RESCAN] (``rescan LUN/target'') is used if a target or logical unit has just appeared on the device. \end{description} - The “removed” and “rescan” events can happen when + The ``removed'' and ``rescan'' events can happen when VIRTIO_SCSI_F_HOTPLUG feature was negotiated; when sent for LUN 0, they MAY apply to the entire target so the driver can ask the initiator to rescan the target to detect this. @@ -4722,13 +4722,13 @@ contents of \field{event}. The following events are defined: application has never discovered them): \begin{itemize} - \item “LUN/target removed” maps to sense key ILLEGAL REQUEST, asc + \item ``LUN/target removed'' maps to sense key ILLEGAL REQUEST, asc 0x25, ascq 0x00 (LOGICAL UNIT NOT SUPPORTED) - \item “LUN hard reset” maps to sense key UNIT ATTENTION, asc 0x29 + \item ``LUN hard reset'' maps to sense key UNIT ATTENTION, asc 0x29 (POWER ON, RESET OR BUS DEVICE RESET OCCURRED) - \item “rescan LUN/target” maps to sense key UNIT ATTENTION, asc + \item ``rescan LUN/target'' maps to sense key UNIT ATTENTION, asc 0x3f, ascq 0x0e (REPORTED LUNS DATA HAS CHANGED) \end{itemize} @@ -4753,8 +4753,8 @@ contents of \field{event}. The following events are defined: All fields are written by the device. \field{event} is set to VIRTIO_SCSI_T_ASYNC_NOTIFY. \field{lun} addresses a logical unit in the SCSI host. \field{reason} is a subset of the - events that the driver has subscribed to via the "Asynchronous - notification subscription" command. + events that the driver has subscribed to via the ``Asynchronous + notification subscription'' command. \item LUN parameter change \begin{lstlisting} diff --git a/introduction.tex b/introduction.tex index 3c7b1b2..2194b36 100644 --- a/introduction.tex +++ b/introduction.tex @@ -73,7 +73,7 @@ Levels", BCP 14, RFC 2119, March 1997. \newline\url{http://www.ietf.org/rfc/rfc2 \section{Terminology}\label{Terminology} -The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this document are to be interpreted as described in \hyperref[intro:rfc2119]{[RFC2119]}. +The key words ``MUST'', ``MUST NOT'', ``REQUIRED'', ``SHALL'', ``SHALL NOT'', ``SHOULD'', ``SHOULD NOT'', ``RECOMMENDED'', ``MAY'', and ``OPTIONAL'' in this document are to be interpreted as described in \hyperref[intro:rfc2119]{[RFC2119]}. \subsection{Legacy Interface: Terminology}\label{intro:Legacy Interface: Terminology} diff --git a/title.tex b/title.tex index 15e39a9..805333a 100644 --- a/title.tex +++ b/title.tex @@ -80,13 +80,13 @@ This specification replaces or supersedes: \begin{oasistitlesection}{Status} This document was last revised or approved by the Virtual I/O Device -(VIRTIO) TC on the above date. The level of approval is also listed above. Check the "Latest version" location noted above for possible later revisions of this document. +(VIRTIO) TC on the above date. The level of approval is also listed above. Check the ``Latest version'' location noted above for possible later revisions of this document. Technical Committee members should send comments on this specification to the Technical Committee’s email list. Others should send comments to the Technical Committee by using the -"\href{https://www.oasis-open.org/committees/comments/form.php?wg_abbrev=virtio}{Send -A Comment}" button on the Technical Committee’s web page at +``\href{https://www.oasis-open.org/committees/comments/form.php?wg_abbrev=virtio}{Send +A Comment}'' button on the Technical Committee’s web page at \url{https://www.oasis-open.org/committees/virtio/}. For information on whether any patents have been disclosed that diff --git a/virtio.tex b/virtio.tex index 4c8d634..08f06c7 100644 --- a/virtio.tex +++ b/virtio.tex @@ -49,7 +49,7 @@ % Don't hyphenate acronyms %\uchyph=0 \setmainfont[Mapping=tex-text]{Arial} -\setromanfont{Arial} +%\setromanfont{Arial} \setmonofont{Courier New} \urlstyle{rm} -- cgit v1.2.3