diff options
Diffstat (limited to 'virtio-v1.0-wd01-part1-specification.txt')
| -rw-r--r-- | virtio-v1.0-wd01-part1-specification.txt | 21 |
1 files changed, 21 insertions, 0 deletions
diff --git a/virtio-v1.0-wd01-part1-specification.txt b/virtio-v1.0-wd01-part1-specification.txt index e6a6f08..bc2de67 100644 --- a/virtio-v1.0-wd01-part1-specification.txt +++ b/virtio-v1.0-wd01-part1-specification.txt @@ -2032,6 +2032,9 @@ targets that receive and process the requests. VIRTIO_SCSI_F_HOTPLUG (1) The host should enable hot-plug/hot-unplug of new LUNs and targets on the SCSI bus. + VIRTIO_SCSI_F_CHANGE (2) The host will report changes to LUN + parameters via a VIRTIO_SCSI_T_PARAM_CHANGE event. + 2.4.6.4. Device configuration layout ----------------------------------- @@ -2492,6 +2495,24 @@ contents of the event field. The following events are defined: When dropped events are reported, the driver should poll for asynchronous events manually using SCSI commands. + LUN parameter change + #define VIRTIO_SCSI_T_PARAM_CHANGE 3 + + By sending this event, the device signals that the configuration parameters + (for example the capacity) of a logical unit have changed. + The event field is set to VIRTIO_SCSI_T_PARAM_CHANGE. + The lun field addresses a logical unit in the SCSI host. + + The same event is also reported as a unit attention condition. + The reason field contains the additional sense code and additional sense code qualifier, + respectively in bits 0..7 and 8..15. + For example, a change in capacity will be reported as asc 0x2a, ascq 0x09 + (CAPACITY DATA HAS CHANGED). + + For MMC devices (inquiry type 5) there would be some overlap between this + event and the asynchronous notification event. + For simplicity, as of this version of the specification the host must + never report this event for MMC devices. 2.5. Reserved Feature Bits ========================= |