diff options
Diffstat (limited to 'content.tex')
| -rw-r--r-- | content.tex | 57 |
1 files changed, 29 insertions, 28 deletions
diff --git a/content.tex b/content.tex index 4e60565..d43decd 100644 --- a/content.tex +++ b/content.tex @@ -8,7 +8,7 @@ device consists of the following parts: \begin{itemize} \item Device status field \item Feature bits -\item Configuration space +\item Device Configuration space \item One or more virtqueues \end{itemize} @@ -138,19 +138,19 @@ To make them easier to locate, specification sections documenting these transitional features are explicitly marked with 'Legacy Interface' in the section title. -\section{Configuration Space}\label{sec:Basic Facilities of a Virtio Device / Configuration Space} +\section{Device Configuration Space}\label{sec:Basic Facilities of a Virtio Device / Device Configuration Space} -Configuration space is generally used for rarely-changing or +Device configuration space is generally used for rarely-changing or initialization-time parameters. Drivers MUST NOT assume reads from fields greater than 32 bits wide are atomic, nor reads from multiple fields. -Each transport provides a generation count for the configuration +Each transport provides a generation count for the device configuration space, which must change whenever there is a possibility that two -accesses to the configuration space can see different versions of that +accesses to the device configuration space can see different versions of that space. -Thus drivers SHOULD read configuration space fields like so: +Thus drivers SHOULD read device configuration space fields like so: \begin{lstlisting} u32 before, after; @@ -161,30 +161,30 @@ do { } while (after != before); \end{lstlisting} -Note that configuration space uses the little-endian format +Note that device configuration space uses the little-endian format for multi-byte fields. Note that future versions of this specification will likely -extend the configuration space for devices by adding extra fields -at the tail end of some structures in configuration space. +extend the device configuration space for devices by adding extra fields +at the tail end of some structures in device configuration space. To allow forward compatibility with such extensions, drivers MUST -NOT limit structure size and configuration space size. Instead, -drivers SHOULD only check that configuration space is *large enough* to +NOT limit structure size and device configuration space size. Instead, +drivers SHOULD only check that device configuration space is *large enough* to contain the fields required for device operation. -For example, if the specification states that configuration +For example, if the specification states that device configuration space 'includes a single 8-bit field' drivers should understand this to mean that -the configuration space might also include an arbitrary amount of -tail padding, and accept any configuration space size equal to or +the device configuration space might also include an arbitrary amount of +tail padding, and accept any device configuration space size equal to or greater than the specified 8-bit size. -\subsection{Legacy Interface: A Note on Configuration Space endian-ness}\label{sec:Basic Facilities of a Virtio Device / Configuration Space / Legacy Interface: A Note on Configuration Space endian-ness} +\subsection{Legacy Interface: A Note on Device Configuration Space endian-ness}\label{sec:Basic Facilities of a Virtio Device / Device Configuration Space / Legacy Interface: A Note on Configuration Space endian-ness} -Note that for legacy interfaces, configuration space is generally the +Note that for legacy interfaces, device configuration space is generally the guest's native endian, rather than PCI's little-endian. -\subsection{Legacy Interface: Configuration Space}\label{sec:Basic Facilities of a Virtio Device / Configuration Space / Legacy Interface: Configuration Space} +\subsection{Legacy Interface: Device Configuration Space}\label{sec:Basic Facilities of a Virtio Device / Device Configuration Space / Legacy Interface: Device Configuration Space} Legacy devices did not have a configuration generation field, thus are susceptible to race conditions if configuration is updated. This @@ -772,8 +772,8 @@ for (;;) { \subsection{Notification of Device Configuration Changes}\label{sec:General Initialization And Device Operation / Device Operation / Notification of Device Configuration Changes} -For devices where the configuration information can be changed, an -interrupt is delivered when a configuration change occurs. +For devices where the device-specific configuration information can be changed, an +interrupt is delivered when a device-specific configuration change occurs. \section{Device Cleanup}\label{sec:General Initialization And Device Operation / Device Cleanup} @@ -1254,7 +1254,9 @@ Transitional Devices must assume that Feature Bits 32 to 63 are not acknowledged by Driver. As legacy devices had no \field{config_generation} field, -see \ref{sec:Basic Facilities of a Virtio Device / Configuration Space / Legacy Interface: Configuration Space}~\nameref{sec:Basic Facilities of a Virtio Device / Configuration Space / Legacy Interface: Configuration Space} for workarounds. +see \ref{sec:Basic Facilities of a Virtio Device / Device +Configuration Space / Legacy Interface: Device Configuration +Space}~\nameref{sec:Basic Facilities of a Virtio Device / Device Configuration Space / Legacy Interface: Device Configuration Space} for workarounds. \subsection{PCI-specific Initialization And Device Operation}\label{sec:Virtio Transport Options / Virtio Over PCI Bus / PCI-specific Initialization And Device Operation} @@ -1274,7 +1276,7 @@ Structure PCI capabilities. \subparagraph{Legacy Interface: A Note on Device Layout Detection}\label{sec:Virtio Transport Options / Virtio Over PCI Bus / PCI-specific Initialization And Device Operation / Device Initialization / Virtio Device Configuration Layout Detection / Legacy Interface: A Note on Device Layout Detection} Legacy drivers skipped the Device Layout Detection step, assuming legacy -device registers in BAR0 in I/O space unconditionally. +device configuration space in BAR0 in I/O space unconditionally. Legacy devices did not have the Virtio PCI Capability in their capability list. @@ -2180,8 +2182,7 @@ combination. \subsubsection{Device Configuration}\label{sec:Virtio Transport Options / Virtio over channel I/O / Device Initialization / Device Configuration} -The device's configuration space is located in host memory. It is -the same size as the standard PCI configuration space. +The device's configuration space is located in host memory. To obtain information from the configuration space, the driver uses CCW_CMD_READ_CONF, specifying the guest memory for the device @@ -3596,7 +3597,7 @@ configuration change interrupt. \item In either case, once the device has completed the inflation or deflation, \field{actual} should be - updated to reflect the new number of pages in the balloon.\footnote{As updates to configuration space are not atomic, this field + updated to reflect the new number of pages in the balloon.\footnote{As updates to device configuration space are not atomic, this field isn't particularly reliable, but can be used to diagnose buggy guests. } \end{enumerate} @@ -4316,16 +4317,16 @@ type. \section{How Many Virtqueues?}\label{sec:Creating New Device Types / How Many Virtqueues?} It is possible that a very simple device will operate entirely -through its configuration space, but most will need at least one +through its device configuration space, but most will need at least one virtqueue in which it will place requests. A device with both input and output (eg. console and network devices described here) need two queues: one which the driver fills with buffers to receive input, and one which the driver places buffers to transmit output. -\section{What Configuration Space Layout?}\label{sec:Creating New Device Types / What Configuration Space Layout?} +\section{What Device Configuration Space Layout?}\label{sec:Creating New Device Types / What Device Configuration Space Layout?} -Configuration space should only be used for initialization-time +Device configuration space should only be used for initialization-time parameters. It is a limited resource with no synchronization between field written by the driver, so for most uses it is better to use a virtqueue to update configuration information (the network device does this for filtering, @@ -4362,7 +4363,7 @@ altogether. \section{Device Improvements}\label{sec:Creating New Device Types / Device Improvements} -Any change to configuration space, or new virtqueues, or +Any change to device configuration space, or new virtqueues, or behavioural changes, should be indicated by negotiation of a new feature bit. This establishes clarity\footnote{Even if it does mean documenting design or implementation mistakes! |