whitespace: make all examples unindented, and avoid tabs.

This makes the formatting far nicer.  Applying now as it touches almost
all examples and layouts, so we can rebase future changes on top of
common ground.

(Based on feedback from Thomas Huth for one example, and generalized).

Signed-off-by: Rusty Russell <rusty@au1.ibm.com>

git-svn-id: https://tools.oasis-open.org/version-control/svn/virtio@203 0c8fb4dd-22a2-4bb5-bc14-6c75a5f43652

1 files changed, 481 insertions, 481 deletions

diff --git a/content.tex b/content.tex
index 48698fc..456b167 100644
--- a/content.tex
+++ b/content.tex
@@ -156,12 +156,12 @@ space.
 Thus drivers SHOULD read configuration space fields like so:
 
 \begin{lstlisting}
-	u32 before, after;
-	do {
-		before = get_config_generation(device);
-		// read config entry/entries.
-		after = get_config_generation(device);
-	} while (after != before);
+u32 before, after;
+do {
+        before = get_config_generation(device);
+        // read config entry/entries.
+        after = get_config_generation(device);
+} while (after != before);
 \end{lstlisting}
 
 Note that configuration space uses the little-endian format
@@ -269,31 +269,31 @@ The bus-specific Queue Size field controls the total number of bytes
 required for the virtqueue according to the following formula:
 
 \begin{lstlisting}
-	#define ALIGN(x) (((x) + PAGE_SIZE) & ~PAGE_SIZE)
-	static inline unsigned vring_size(unsigned int qsz)
-	{
-	     return ALIGN(sizeof(struct vring_desc)*qsz + sizeof(u16)*(3 + qsz))
-	          + ALIGN(sizeof(u16)*3 + sizeof(struct vring_used_elem)*qsz);
-	}
+#define ALIGN(x) (((x) + PAGE_SIZE) & ~PAGE_SIZE)
+static inline unsigned vring_size(unsigned int qsz)
+{
+     return ALIGN(sizeof(struct vring_desc)*qsz + sizeof(u16)*(3 + qsz))
+          + ALIGN(sizeof(u16)*3 + sizeof(struct vring_used_elem)*qsz);
+}
 \end{lstlisting}
 
 This wastes some space with padding.
 The legacy virtqueue layout structure therefore looks like this:
 
 \begin{lstlisting}
-	struct vring {
-		// The actual descriptors (16 bytes each)
-		struct vring_desc desc[ Queue Size ];
+struct vring {
+        // The actual descriptors (16 bytes each)
+        struct vring_desc desc[ Queue Size ];
 
-		// A ring of available descriptor heads with free-running index.
-		struct vring_avail avail;
+        // A ring of available descriptor heads with free-running index.
+        struct vring_avail avail;
 
-		// Padding to the next PAGE_SIZE boundary.
-		char pad[ Padding ];
+        // Padding to the next PAGE_SIZE boundary.
+        char pad[ Padding ];
 
-		// A ring of used descriptor heads with free-running index.
-		struct vring_used used;
-	};
+        // A ring of used descriptor heads with free-running index.
+        struct vring_used used;
+};
 \end{lstlisting}
 
 \subsection{Legacy Interfaces: A Note on Virtqueue Endianness}\label{sec:Basic Facilities of a Virtio Device / Virtqueues / Legacy Interfaces: A Note on Virtqueue Endianness}
@@ -349,23 +349,23 @@ Drivers MUST NOT add a descriptor chain over than $2^{32}$ bytes long in total;
 this implies that loops in the descriptor chain are forbidden!
 
 \begin{lstlisting}
-	struct vring_desc {
-		/* Address (guest-physical). */
-		le64 addr;
-		/* Length. */
-		le32 len;
-
-	/* This marks a buffer as continuing via the next field. */
-	#define VRING_DESC_F_NEXT   1
-	/* This marks a buffer as write-only (otherwise read-only). */
-	#define VRING_DESC_F_WRITE     2
-	/* This means the buffer contains a list of buffer descriptors. */
-	#define VRING_DESC_F_INDIRECT   4
-		/* The flags as indicated above. */
-		le16 flags;
-		/* Next field if flags & NEXT */
-		le16 next;
-	};
+struct vring_desc {
+        /* Address (guest-physical). */
+        le64 addr;
+        /* Length. */
+        le32 len;
+
+/* This marks a buffer as continuing via the next field. */
+#define VRING_DESC_F_NEXT   1
+/* This marks a buffer as write-only (otherwise read-only). */
+#define VRING_DESC_F_WRITE     2
+/* This means the buffer contains a list of buffer descriptors. */
+#define VRING_DESC_F_INDIRECT   4
+        /* The flags as indicated above. */
+        le16 flags;
+        /* Next field if flags & NEXT */
+        le16 next;
+};
 \end{lstlisting}
 
 The number of descriptors in the table is defined by the queue size
@@ -390,10 +390,10 @@ The indirect table layout structure looks like this
 which is a variable, so this code won't compile):
 
 \begin{lstlisting}
-	struct indirect_descriptor_table {
-		/* The actual descriptors (16 bytes each) */
-		struct vring_desc desc[len / 16];
-	};
+struct indirect_descriptor_table {
+        /* The actual descriptors (16 bytes each) */
+        struct vring_desc desc[len / 16];
+};
 \end{lstlisting}
 
 The first indirect descriptor is located at start of the indirect
@@ -409,13 +409,13 @@ the device MUST ignore the write-only flag (flags\&VRING_DESC_F_WRITE) in the de
 \subsection{The Virtqueue Available Ring}\label{sec:Basic Facilities of a Virtio Device / Virtqueues / The Virtqueue Available Ring}
 
 \begin{lstlisting}
-	struct vring_avail {
-	#define VRING_AVAIL_F_NO_INTERRUPT      1
-		le16 flags;
-		le16 idx;
-		le16 ring[ /* Queue Size */ ];
-		le16 used_event;	/* Only if VIRTIO_RING_F_EVENT_IDX */
-	};
+struct vring_avail {
+#define VRING_AVAIL_F_NO_INTERRUPT      1
+        le16 flags;
+        le16 idx;
+        le16 ring[ /* Queue Size */ ];
+        le16 used_event; /* Only if VIRTIO_RING_F_EVENT_IDX */
+};
 \end{lstlisting}
 
 The driver uses the available ring to offer buffers to the
@@ -445,21 +445,21 @@ entirely.
 \subsection{The Virtqueue Used Ring}\label{sec:Basic Facilities of a Virtio Device / Virtqueues / The Virtqueue Used Ring}
 
 \begin{lstlisting}
-	struct vring_used {
-	#define VRING_USED_F_NO_NOTIFY  1
-		le16 flags;
-		le16 idx;
-		struct vring_used_elem ring[ /* Queue Size */];
-		le16 avail_event; /* Only if VIRTIO_RING_F_EVENT_IDX */
-	};
-
-	/* le32 is used here for ids for padding reasons. */
-	struct vring_used_elem {
-		/* Index of start of used descriptor chain. */
-		le32 id;
-		/* Total length of the descriptor chain which was used (written to) */
-		le32 len;
-	};
+struct vring_used {
+#define VRING_USED_F_NO_NOTIFY  1
+        le16 flags;
+        le16 idx;
+        struct vring_used_elem ring[ /* Queue Size */];
+        le16 avail_event; /* Only if VIRTIO_RING_F_EVENT_IDX */
+};
+
+/* le32 is used here for ids for padding reasons. */
+struct vring_used_elem {
+        /* Index of start of used descriptor chain. */
+        le32 id;
+        /* Total length of the descriptor chain which was used (written to) */
+        le32 len;
+};
 \end{lstlisting}
 
 The used ring is where the device returns buffers once it is done with
@@ -650,7 +650,7 @@ part of the buffer.  A naive implementation would do the following (with the
 appropriate conversion to-and-from little-endian assumed):
 
 \begin{lstlisting}
-	avail->ring[avail->idx % qsz] = head;
+avail->ring[avail->idx % qsz] = head;
 \end{lstlisting}
 
 However, in general the driver can add many descriptor chains before it updates
@@ -658,7 +658,7 @@ the “idx” field (at which point they become visible to the
 device), so it is common to keep a counter of how many the driver has added:
 
 \begin{lstlisting}
-	avail->ring[(avail->idx + added++) % qsz] = head;
+avail->ring[(avail->idx + added++) % qsz] = head;
 \end{lstlisting}
 
 \subsubsection{Updating The Index Field}\label{sec:General Initialization And Device Operation / Device Operation / Supplying Buffers to The Device / Updating The Index Field}
@@ -673,7 +673,7 @@ The index field always increments, and the driver can let it wrap naturally at
 65536:
 
 \begin{lstlisting}
-	avail->idx += added;
+avail->idx += added;
 \end{lstlisting}
 
 \subsubsection{Notifying The Device}\label{sec:General Initialization And Device Operation / Device Operation / Supplying Buffers to The Device / Notifying The Device}
@@ -698,7 +698,7 @@ giving the following algorithm for calculating whether a device needs
 notification:
 
 \begin{lstlisting}
-	(u16)(new_idx - avail_event - 1) < (u16)(new_idx - old_idx)
+(u16)(new_idx - avail_event - 1) < (u16)(new_idx - old_idx)
 \end{lstlisting}
 
 \subsection{Receiving Used Buffers From The Device}\label{sec:General Initialization And Device Operation / Device Operation / Receiving Used Buffers From The Device}
@@ -727,7 +727,7 @@ buffer:
     since the last update. The used_event field wraps naturally
     at 65536 as well:
 \begin{lstlisting}
-	(u16)(new_idx - used_event - 1) < (u16)(new_idx - old_idx)
+(u16)(new_idx - used_event - 1) < (u16)(new_idx - old_idx)
 \end{lstlisting}
   \end{enumerate}
 \end{enumerate}
@@ -743,21 +743,21 @@ last check and before enabling interrupts, an interrupt has been
 suppressed by the device:
 
 \begin{lstlisting}
-	vring_disable_interrupts(vq);
+vring_disable_interrupts(vq);
 
-	for (;;) {
-		if (vq->last_seen_used != le16_to_cpu(vring->used.idx)) {
-			vring_enable_interrupts(vq);
-			mb();
+for (;;) {
+        if (vq->last_seen_used != le16_to_cpu(vring->used.idx)) {
+                vring_enable_interrupts(vq);
+                mb();
 
-			if (vq->last_seen_used != le16_to_cpu(vring->used.idx))
-				break;
-		}
+                if (vq->last_seen_used != le16_to_cpu(vring->used.idx))
+                        break;
+        }
 
-		struct vring_used_elem *e = vring.used->ring[vq->last_seen_used%vsz];
-		process_buffer(e);
-		vq->last_seen_used++;
-	}
+        struct vring_used_elem *e = vring.used->ring[vq->last_seen_used%vsz];
+        process_buffer(e);
+        vq->last_seen_used++;
+}
 \end{lstlisting}
 
 \subsection{Notification of Device Configuration Changes}\label{sec:General Initialization And Device Operation / Device Operation / Notification of Device Configuration Changes}
@@ -822,27 +822,27 @@ All multi-byte fields are little-endian.
 Common configuration structure layout is documented below:
 
 \begin{lstlisting}
-	struct virtio_pci_common_cfg {
-		/* About the whole device. */
-		le32 device_feature_select;	/* read-write */
-		le32 device_feature;		/* read-only */
-		le32 driver_feature_select;	/* read-write */
-		le32 driver_feature;		/* read-write */
-		le16 msix_config;		/* read-write */
-		le16 num_queues;		/* read-only */
-		u8 device_status;		/* read-write */
-		u8 config_generation;		/* read-only */
-
-		/* About a specific virtqueue. */
-		le16 queue_select;		/* read-write */
-		le16 queue_size;		/* read-write, power of 2, or 0. */
-		le16 queue_msix_vector;		/* read-write */
-		le16 queue_enable;		/* read-write */
-		le16 queue_notify_off;		/* read-only */
-		le64 queue_desc;		/* read-write */
-		le64 queue_avail;		/* read-write */
-		le64 queue_used;		/* read-write */
-	};
+struct virtio_pci_common_cfg {
+        /* About the whole device. */
+        le32 device_feature_select;     /* read-write */
+        le32 device_feature;            /* read-only */
+        le32 driver_feature_select;     /* read-write */
+        le32 driver_feature;            /* read-write */
+        le16 msix_config;               /* read-write */
+        le16 num_queues;                /* read-only */
+        u8 device_status;               /* read-write */
+        u8 config_generation;           /* read-only */
+
+        /* About a specific virtqueue. */
+        le16 queue_select;              /* read-write */
+        le16 queue_size;                /* read-write, power of 2, or 0. */
+        le16 queue_msix_vector;         /* read-write */
+        le16 queue_enable;              /* read-write */
+        le16 queue_notify_off;          /* read-only */
+        le64 queue_desc;                /* read-write */
+        le64 queue_avail;               /* read-write */
+        le64 queue_used;                /* read-write */
+};
 \end{lstlisting}
 
 \begin{description}
@@ -1030,16 +1030,16 @@ This virtio structure capability uses little-endian format; all bits are
 read-only:
 
 \begin{lstlisting}
-	struct virtio_pci_cap {
-		u8 cap_vndr;	/* Generic PCI field: PCI_CAP_ID_VNDR */
-		u8 cap_next;	/* Generic PCI field: next ptr. */
-		u8 cap_len;	/* Generic PCI field: capability length */
-		u8 cfg_type;	/* Identifies the structure. */
-		u8 bar;		/* Where to find it. */
-		u8 padding[3];	/* Pad to full dword. */
-		le32 offset;	/* Offset within bar. */
-		le32 length;	/* Length of the structure, in bytes. */
-	};
+struct virtio_pci_cap {
+        u8 cap_vndr;    /* Generic PCI field: PCI_CAP_ID_VNDR */
+        u8 cap_next;    /* Generic PCI field: next ptr. */
+        u8 cap_len;     /* Generic PCI field: capability length */
+        u8 cfg_type;    /* Identifies the structure. */
+        u8 bar;         /* Where to find it. */
+        u8 padding[3];  /* Pad to full dword. */
+        le32 offset;    /* Offset within bar. */
+        le32 length;    /* Length of the structure, in bytes. */
+};
 \end{lstlisting}
 
 This structure can optionally be followed by extra data, depending on
@@ -1077,16 +1077,16 @@ The fields are interpreted as follows:
         identifies the structure, according to the following table.
 
 \begin{lstlisting}
-	/* Common configuration */
-	#define VIRTIO_PCI_CAP_COMMON_CFG	1
-	/* Notifications */
-	#define VIRTIO_PCI_CAP_NOTIFY_CFG	2
-	/* ISR Status */
-	#define VIRTIO_PCI_CAP_ISR_CFG		3
-	/* Device specific configuration */
-	#define VIRTIO_PCI_CAP_DEVICE_CFG	4
-	/* PCI configuration access */
-	#define VIRTIO_PCI_CAP_PCI_CFG		5
+/* Common configuration */
+#define VIRTIO_PCI_CAP_COMMON_CFG        1
+/* Notifications */
+#define VIRTIO_PCI_CAP_NOTIFY_CFG        2
+/* ISR Status */
+#define VIRTIO_PCI_CAP_ISR_CFG           3
+/* Device specific configuration */
+#define VIRTIO_PCI_CAP_DEVICE_CFG        4
+/* PCI configuration access */
+#define VIRTIO_PCI_CAP_PCI_CFG           5
 \end{lstlisting}
 
         Any other value - reserved for future use. Drivers MUST
@@ -1136,10 +1136,10 @@ If cfg_type is VIRTIO_PCI_CAP_NOTIFY_CFG this structure is immediately followed
 by additional fields:
 
 \begin{lstlisting}
-	struct virtio_pci_notify_cap {
-		struct virtio_pci_cap cap;
-		le32 notify_off_multiplier;	/* Multiplier for queue_notify_off. */
-	};
+struct virtio_pci_notify_cap {
+        struct virtio_pci_cap cap;
+        le32 notify_off_multiplier; /* Multiplier for queue_notify_off. */
+};
 \end{lstlisting}
 
 \begin{description}
@@ -1159,9 +1159,9 @@ If cfg_type is VIRTIO_PCI_CAP_PCI_CFG the fields bar, offset and length are RW
 and this structure is immediately followed by an additional field:
 
 \begin{lstlisting}
-	struct virtio_pci_cfg_cap {
-		__u8 pci_cfg_data[4];	/* Data for BAR access. */
-	};
+struct virtio_pci_cfg_cap {
+        __u8 pci_cfg_data[4]; /* Data for BAR access. */
+};
 \end{lstlisting}
 
 \begin{description}
@@ -1233,8 +1233,8 @@ specific event type, unmap it by writing a special NO_VECTOR
 value:
 
 \begin{lstlisting}
-	/* Vector value used to disable MSI for queue */
-	#define VIRTIO_MSI_NO_VECTOR            0xffff
+/* Vector value used to disable MSI for queue */
+#define VIRTIO_MSI_NO_VECTOR            0xffff
 \end{lstlisting}
 
 Reading these registers returns vector mapped to a given event,
@@ -1374,12 +1374,12 @@ and interrupt(s) used.  The suggested binding for systems using
 flattened device trees is shown in this example:
 
 \begin{lstlisting}
-        // EXAMPLE: virtio_block device taking 256 bytes at 0x1e000, interrupt 42.
-	virtio_block@1e000 {
-		compatible = "virtio,mmio";
-		reg = <0x1e000 0x100>;
-		interrupts = <42>;
-	}
+// EXAMPLE: virtio_block device taking 256 bytes at 0x1e000, interrupt 42.
+virtio_block@1e000 {
+        compatible = "virtio,mmio";
+        reg = <0x1e000 0x100>;
+        interrupts = <42>;
+}
 \end{lstlisting}
 
 \subsection{MMIO Device Register Layout}\label{sec:Virtio Transport Options / Virtio Over MMIO / MMIO Device Register Layout}
@@ -1875,18 +1875,18 @@ set of channel commands related to configuration and operation of
 virtio:
 
 \begin{lstlisting}
-	#define CCW_CMD_SET_VQ 0x13
-	#define CCW_CMD_VDEV_RESET 0x33
-	#define CCW_CMD_SET_IND 0x43
-	#define CCW_CMD_SET_CONF_IND 0x53
-	#define CCW_CMD_SET_IND_ADAPTER 0x73
-	#define CCW_CMD_READ_FEAT 0x12
-	#define CCW_CMD_WRITE_FEAT 0x11
-	#define CCW_CMD_READ_CONF 0x22
-	#define CCW_CMD_WRITE_CONF 0x21
-	#define CCW_CMD_WRITE_STATUS 0x31
-	#define CCW_CMD_READ_VQ_CONF 0x32
-	#define CCW_CMD_SET_VIRTIO_REV 0x83
+#define CCW_CMD_SET_VQ 0x13
+#define CCW_CMD_VDEV_RESET 0x33
+#define CCW_CMD_SET_IND 0x43
+#define CCW_CMD_SET_CONF_IND 0x53
+#define CCW_CMD_SET_IND_ADAPTER 0x73
+#define CCW_CMD_READ_FEAT 0x12
+#define CCW_CMD_WRITE_FEAT 0x11
+#define CCW_CMD_READ_CONF 0x22
+#define CCW_CMD_WRITE_CONF 0x21
+#define CCW_CMD_WRITE_STATUS 0x31
+#define CCW_CMD_READ_VQ_CONF 0x32
+#define CCW_CMD_SET_VIRTIO_REV 0x83
 \end{lstlisting}
 
 The virtio-ccw device acts like a normal channel device, as specified
@@ -1919,11 +1919,11 @@ the virtio-ccw transport it intends to drive the device with. It uses the
 following communication structure:
 
 \begin{lstlisting}
-	struct virtio_rev_info {
-		be16 revision;
-		be16 length;
-		u8 data[];
-	};
+struct virtio_rev_info {
+        be16 revision;
+        be16 length;
+        u8 data[];
+};
 \end{lstlisting}
 
 revision contains the desired revision id, length the length of the
@@ -1991,10 +1991,10 @@ CCW_CMD_READ_VQ_CONF is issued by the driver to obtain information
 about a queue. It uses the following structure for communicating:
 
 \begin{lstlisting}
-	struct vq_config_block {
-		be16 index;
-		be16 max_num;
-	} __attribute__ ((packed));
+struct vq_config_block {
+        be16 index;
+        be16 max_num;
+} __attribute__ ((packed));
 \end{lstlisting}
 
 The requested number of buffers for queue index is returned in
@@ -2005,14 +2005,14 @@ device about the location used for its queue. The transmitted
 structure is
 
 \begin{lstlisting}
-	struct vq_info_block {
-		be64 desc;
-		be32 res0;
-		be16 index;
-		be16 num;
-		be64 avail;
-		be64 used;
-	} __attribute__ ((packed));
+struct vq_info_block {
+        be64 desc;
+        be32 res0;
+        be16 index;
+        be16 num;
+        be64 avail;
+        be64 used;
+} __attribute__ ((packed));
 \end{lstlisting}
 
 desc, avail and used contain the guest addresses for the descriptor table,
@@ -2026,12 +2026,12 @@ For a legacy driver or for a driver that selected revision 0,
 CCW_CMD_SET_VQ uses the following communication block:
 
 \begin{lstlisting}
-	struct vq_info_block_legacy {
-		be64 queue;
-		be32 align;
-		be16 index;
-		be16 num;
-	} __attribute__ ((packed));
+struct vq_info_block_legacy {
+        be64 queue;
+        be32 align;
+        be16 index;
+        be16 num;
+} __attribute__ ((packed));
 \end{lstlisting}
 
 queue contains the guest address for queue index, num the number of buffers
@@ -2051,13 +2051,13 @@ Descriptor Table & Available Ring (\ldots padding\ldots) & Used Ring \\
 The calculation for total size is as follows:
 
 \begin{lstlisting}
-	#define ALIGN(x) (((x) + align) & ~align)
-	static inline unsigned vring_size(unsigned int num)
-	{
-	     return ALIGN(sizeof(struct vring_desc)*num
-			  + sizeof(u16)*(3 + num))
-	          + ALIGN(sizeof(u16)*3 + sizeof(struct vring_used_elem)*num);
-	}
+#define ALIGN(x) (((x) + align) & ~align)
+static inline unsigned vring_size(unsigned int num)
+{
+     return ALIGN(sizeof(struct vring_desc)*num
+                  + sizeof(u16)*(3 + num))
+          + ALIGN(sizeof(u16)*3 + sizeof(struct vring_used_elem)*num);
+}
 \end{lstlisting}
 
 \subsubsection{Communicating Status Information}\label{sec:Virtio Transport Options / Virtio over channel I/O / Device Initialization / Communicating Status Information}
@@ -2076,10 +2076,10 @@ The CCW commands dealing with features use the following
 communication block:
 
 \begin{lstlisting}
-	struct virtio_feature_desc {
-		le32 features;
-		u8 index;
-	} __attribute__ ((packed));
+struct virtio_feature_desc {
+        le32 features;
+        u8 index;
+} __attribute__ ((packed));
 \end{lstlisting}
 
 features are the 32 bits of features currently accessed, while
@@ -2164,12 +2164,12 @@ the driver uses the CCW_CMD_SET_IND_ADAPTER command with the following
 payload:
 
 \begin{lstlisting}
-	struct virtio_thinint_area {
-	       be64 summary_indicator;
-	       be64 indicator;
-	       be64 bit_nr;
-	       u8 isc;
-	} __attribute__ ((packed));
+struct virtio_thinint_area {
+        be64 summary_indicator;
+        be64 indicator;
+        be64 bit_nr;
+        u8 isc;
+} __attribute__ ((packed));
 \end{lstlisting}
 
 summary_indicator contains the guest address of the 8 bit summary
@@ -2271,9 +2271,9 @@ For each notification, the output value is returned in GPR2 and
 should be passed in GPR4 for the next notification:
 
 \begin{lstlisting}
-        info->cookie = do_notify(schid,
-                                 virtqueue_get_queue_index(vq),
-                                 info->cookie);
+info->cookie = do_notify(schid,
+                         virtqueue_get_queue_index(vq),
+                         info->cookie);
 \end{lstlisting}
 
 \subsubsection{Resetting Devices}\label{sec:Virtio Transport Options / Virtio over channel I/O / Device Operation / Resetting Devices}
@@ -2423,8 +2423,8 @@ read-only bits are currently defined for the status field:
 VIRTIO_NET_S_LINK_UP and VIRTIO_NET_S_ANNOUNCE.
 
 \begin{lstlisting}
-	#define VIRTIO_NET_S_LINK_UP	1
-	#define VIRTIO_NET_S_ANNOUNCE	2
+#define VIRTIO_NET_S_LINK_UP     1
+#define VIRTIO_NET_S_ANNOUNCE    2
 \end{lstlisting}
 
 The following read-only field, max_virtqueue_pairs only exists if
@@ -2435,11 +2435,11 @@ and transmitq0..transmitqN respectively;
 is negotiated.  Legal values for this field are 1 to 0x8000.
 
 \begin{lstlisting}
-	struct virtio_net_config {
-		u8 mac[6];
-		le16 status;
-		le16 max_virtqueue_pairs;
-	};
+struct virtio_net_config {
+        u8 mac[6];
+        le16 status;
+        le16 max_virtqueue_pairs;
+};
 \end{lstlisting}
 
 \subsubsection{Legacy Interface: Device configuration layout}\label{sec:Device Types / Network Device / Device configuration layout / Legacy Interface: Device configuration layout}
@@ -2521,22 +2521,22 @@ placed in the receiveq0..receiveqN. In each case, the packet
 itself is preceeded by a header:
 
 \begin{lstlisting}
-	struct virtio_net_hdr {
-	#define VIRTIO_NET_HDR_F_NEEDS_CSUM    1
-		u8 flags;
-	#define VIRTIO_NET_HDR_GSO_NONE        0
-	#define VIRTIO_NET_HDR_GSO_TCPV4       1
-	#define VIRTIO_NET_HDR_GSO_UDP		 3
-	#define VIRTIO_NET_HDR_GSO_TCPV6       4
-	#define VIRTIO_NET_HDR_GSO_ECN      0x80
-		u8 gso_type;
-		le16 hdr_len;
-		le16 gso_size;
-		le16 csum_start;
-		le16 csum_offset;
-	/* Only if VIRTIO_NET_F_MRG_RXBUF: */
-		le16 num_buffers;
-	};
+struct virtio_net_hdr {
+#define VIRTIO_NET_HDR_F_NEEDS_CSUM    1
+        u8 flags;
+#define VIRTIO_NET_HDR_GSO_NONE        0
+#define VIRTIO_NET_HDR_GSO_TCPV4       1
+#define VIRTIO_NET_HDR_GSO_UDP         3
+#define VIRTIO_NET_HDR_GSO_TCPV6       4
+#define VIRTIO_NET_HDR_GSO_ECN      0x80
+        u8 gso_type;
+        le16 hdr_len;
+        le16 gso_size;
+        le16 csum_start;
+        le16 csum_offset;
+/* Only if VIRTIO_NET_F_MRG_RXBUF: */
+        le16 num_buffers;
+};
 \end{lstlisting}
 
 The controlq is used to control device features such as
@@ -2691,16 +2691,16 @@ space.
 All commands are of the following form:
 
 \begin{lstlisting}
-	struct virtio_net_ctrl {
-		u8 class;
-		u8 command;
-		u8 command-specific-data[];
-		u8 ack;
-	};
-
-	/* ack values */
-	#define VIRTIO_NET_OK     0
-	#define VIRTIO_NET_ERR    1
+struct virtio_net_ctrl {
+        u8 class;
+        u8 command;
+        u8 command-specific-data[];
+        u8 ack;
+};
+
+/* ack values */
+#define VIRTIO_NET_OK     0
+#define VIRTIO_NET_ERR    1
 \end{lstlisting}
 
 The class, command and command-specific-data are set by the
@@ -2720,9 +2720,9 @@ packets may still arrive.
 \paragraph{Setting Promiscuous Mode}\label{sec:Device Types / Network Device / Device Operation / Control Virtqueue / Setting Promiscuous Mode}
 
 \begin{lstlisting}
-	#define VIRTIO_NET_CTRL_RX    0
-	 #define VIRTIO_NET_CTRL_RX_PROMISC      0
-	 #define VIRTIO_NET_CTRL_RX_ALLMULTI     1
+#define VIRTIO_NET_CTRL_RX    0
+ #define VIRTIO_NET_CTRL_RX_PROMISC      0
+ #define VIRTIO_NET_CTRL_RX_ALLMULTI     1
 \end{lstlisting}
 
 The class VIRTIO_NET_CTRL_RX has two commands:
@@ -2734,14 +2734,14 @@ off. The command-specific-data is one byte containing 0 (off) or
 \paragraph{Setting MAC Address Filtering}\label{sec:Device Types / Network Device / Device Operation / Control Virtqueue / Setting MAC Address Filtering}
 
 \begin{lstlisting}
-	struct virtio_net_ctrl_mac {
-		le32 entries;
-		u8 macs[entries][ETH_ALEN];
-	};
-
-	#define VIRTIO_NET_CTRL_MAC    1
-	 #define VIRTIO_NET_CTRL_MAC_TABLE_SET        0
-	 #define VIRTIO_NET_CTRL_MAC_ADDR_SET         1
+struct virtio_net_ctrl_mac {
+        le32 entries;
+        u8 macs[entries][ETH_ALEN];
+};
+
+#define VIRTIO_NET_CTRL_MAC    1
+ #define VIRTIO_NET_CTRL_MAC_TABLE_SET        0
+ #define VIRTIO_NET_CTRL_MAC_ADDR_SET         1
 \end{lstlisting}
 
 The device can filter incoming packets by any number of destination
@@ -2794,9 +2794,9 @@ If the driver negotiates the VIRTION_NET_F_CTRL_VLAN feature, it
 can control a VLAN filter table in the device.
 
 \begin{lstlisting}
-	#define VIRTIO_NET_CTRL_VLAN       2
-	 #define VIRTIO_NET_CTRL_VLAN_ADD             0
-	 #define VIRTIO_NET_CTRL_VLAN_DEL             1
+#define VIRTIO_NET_CTRL_VLAN       2
+ #define VIRTIO_NET_CTRL_VLAN_ADD             0
+ #define VIRTIO_NET_CTRL_VLAN_DEL             1
 \end{lstlisting}
 
 Both the VIRTIO_NET_CTRL_VLAN_ADD and VIRTIO_NET_CTRL_VLAN_DEL
@@ -2817,8 +2817,8 @@ network configuration (eg. tagged vlan) it is simplest to prod
 the guest in this way).
 
 \begin{lstlisting}
-	#define VIRTIO_NET_CTRL_ANNOUNCE       3
-	 #define VIRTIO_NET_CTRL_ANNOUNCE_ACK             0
+#define VIRTIO_NET_CTRL_ANNOUNCE       3
+ #define VIRTIO_NET_CTRL_ANNOUNCE_ACK             0
 \end{lstlisting}
 
 The Driver needs to check VIRTIO_NET_S_ANNOUNCE bit in status
@@ -2848,14 +2848,14 @@ queue incoming packets into one of the multiple receiveq0..receiveqN
 depending on the packet flow.
 
 \begin{lstlisting}
-	struct virtio_net_ctrl_mq {
-		le16 virtqueue_pairs;
-	};
-
-	#define VIRTIO_NET_CTRL_MQ    4
-	 #define VIRTIO_NET_CTRL_MQ_VQ_PAIRS_SET        0
-	 #define VIRTIO_NET_CTRL_MQ_VQ_PAIRS_MIN        1
-	 #define VIRTIO_NET_CTRL_MQ_VQ_PAIRS_MAX        0x8000
+struct virtio_net_ctrl_mq {
+        le16 virtqueue_pairs;
+};
+
+#define VIRTIO_NET_CTRL_MQ    4
+ #define VIRTIO_NET_CTRL_MQ_VQ_PAIRS_SET        0
+ #define VIRTIO_NET_CTRL_MQ_VQ_PAIRS_MIN        1
+ #define VIRTIO_NET_CTRL_MQ_VQ_PAIRS_MAX        0x8000
 \end{lstlisting}
 
 Multiqueue is disabled by default. The driver enables multiqueue by
@@ -2894,16 +2894,16 @@ send control commands for dynamic offloads state configuration.
 \subparagraph{Setting Offloads State}\label{sec:Device Types / Network Device / Device Operation / Control Virtqueue / Offloads State Configuration / Setting Offloads State}
 
 \begin{lstlisting}
-	le64 offloads;
+le64 offloads;
 
-	#define VIRTIO_NET_F_GUEST_CSUM       1
-	#define VIRTIO_NET_F_GUEST_TSO4       7
-	#define VIRTIO_NET_F_GUEST_TSO6       8
-	#define VIRTIO_NET_F_GUEST_ECN        9
-	#define VIRTIO_NET_F_GUEST_UFO        10
+#define VIRTIO_NET_F_GUEST_CSUM       1
+#define VIRTIO_NET_F_GUEST_TSO4       7
+#define VIRTIO_NET_F_GUEST_TSO6       8
+#define VIRTIO_NET_F_GUEST_ECN        9
+#define VIRTIO_NET_F_GUEST_UFO        10
 
-	#define VIRTIO_NET_CTRL_GUEST_OFFLOADS       5
-	 #define VIRTIO_NET_CTRL_GUEST_OFFLOADS_SET   0
+#define VIRTIO_NET_CTRL_GUEST_OFFLOADS       5
+ #define VIRTIO_NET_CTRL_GUEST_OFFLOADS_SET   0
 \end{lstlisting}
 
 The class VIRTIO_NET_CTRL_GUEST_OFFLOADS has one command:
@@ -2984,28 +2984,28 @@ present. The availability of the others all depend on various feature
 bits as indicated above.
 
 \begin{lstlisting}
-	struct virtio_blk_config {
-		le64 capacity;
-		le32 size_max;
-		le32 seg_max;
-		struct virtio_blk_geometry {
-			le16 cylinders;
-			u8 heads;
-			u8 sectors;
-		} geometry;
-		le32 blk_size;
-		struct virtio_blk_topology {
-			// # of logical blocks per physical block (log2)
-			u8 physical_block_exp;
-			// offset of first aligned logical block
-			u8 alignment_offset;
-			// suggested minimum I/O size in blocks
-			le16 min_io_size;
-			// optimal (suggested maximum) I/O size in blocks
-			le32 opt_io_size;
-		} topology;
-		u8 reserved;
-	};
+struct virtio_blk_config {
+        le64 capacity;
+        le32 size_max;
+        le32 seg_max;
+        struct virtio_blk_geometry {
+                le16 cylinders;
+                u8 heads;
+                u8 sectors;
+        } geometry;
+        le32 blk_size;
+        struct virtio_blk_topology {
+                // # of logical blocks per physical block (log2)
+                u8 physical_block_exp;
+                // offset of first aligned logical block
+                u8 alignment_offset;
+                // suggested minimum I/O size in blocks
+                le16 min_io_size;
+                // optimal (suggested maximum) I/O size in blocks
+                le32 opt_io_size;
+        } topology;
+        u8 reserved;
+};
 \end{lstlisting}
 
 
@@ -3056,13 +3056,13 @@ The driver queues requests to the virtqueue, and they are used by
 the device (not necessarily in order). Each request is of form:
 
 \begin{lstlisting}
-	struct virtio_blk_req {
-		le32 type;
-		le32 reserved;
-		le64 sector;
-		char data[][512];
-		u8 status;
-	};
+struct virtio_blk_req {
+        le32 type;
+        le32 reserved;
+        le64 sector;
+        char data[][512];
+        u8 status;
+};
 \end{lstlisting}
 
 The type of the request is either a read (VIRTIO_BLK_T_IN), a write
@@ -3072,10 +3072,10 @@ distinguish between them
 }).
 
 \begin{lstlisting}
-	#define VIRTIO_BLK_T_IN           0
-	#define VIRTIO_BLK_T_OUT          1
-	#define VIRTIO_BLK_T_FLUSH        4
-	#define VIRTIO_BLK_T_FLUSH_OUT    5
+#define VIRTIO_BLK_T_IN           0
+#define VIRTIO_BLK_T_OUT          1
+#define VIRTIO_BLK_T_FLUSH        4
+#define VIRTIO_BLK_T_FLUSH_OUT    5
 \end{lstlisting}
 
 The sector number indicates the offset (multiplied by 512) where
@@ -3087,9 +3087,9 @@ VIRTIO_BLK_S_OK for success, VIRTIO_BLK_S_IOERR for device or driver
 error or VIRTIO_BLK_S_UNSUPP for a request unsupported by device:
 
 \begin{lstlisting}
-	#define VIRTIO_BLK_S_OK        0
-	#define VIRTIO_BLK_S_IOERR     1
-	#define VIRTIO_BLK_S_UNSUPP    2
+#define VIRTIO_BLK_S_OK        0
+#define VIRTIO_BLK_S_IOERR     1
+#define VIRTIO_BLK_S_UNSUPP    2
 \end{lstlisting}
 
 Any writes completed before the submission of the flush command should
@@ -3104,7 +3104,7 @@ is a hint about the relative priorities of requests to the device:
 higher numbers indicate more important requests.
 
 \begin{lstlisting}
-	#define VIRTIO_BLK_T_BARRIER	 0x80000000
+#define VIRTIO_BLK_T_BARRIER     0x80000000
 \end{lstlisting}
 
 If the device has VIRTIO_BLK_F_BARRIER
@@ -3120,21 +3120,21 @@ If the device has VIRTIO_BLK_F_SCSI feature, it can also support
 scsi packet command requests, each of these requests is of form:
 
 \begin{lstlisting}
-	/* All fields are in guest's native endian. */
-	struct virtio_scsi_pc_req {
-		u32 type;
-		u32 ioprio;
-		u64 sector;
-		char cmd[];
-		char data[][512];
-	#define SCSI_SENSE_BUFFERSIZE   96
-		u8 sense[SCSI_SENSE_BUFFERSIZE];
-		u32 errors;
-		u32 data_len;
-		u32 sense_len;
-		u32 residual;
-		u8 status;
-	};
+/* All fields are in guest's native endian. */
+struct virtio_scsi_pc_req {
+        u32 type;
+        u32 ioprio;
+        u64 sector;
+        char cmd[];
+        char data[][512];
+#define SCSI_SENSE_BUFFERSIZE   96
+        u8 sense[SCSI_SENSE_BUFFERSIZE];
+        u32 errors;
+        u32 data_len;
+        u32 sense_len;
+        u32 residual;
+        u8 status;
+};
 \end{lstlisting}
 
 A request type can also be a scsi packet command (VIRTIO_BLK_T_SCSI_CMD or
@@ -3142,8 +3142,8 @@ VIRTIO_BLK_T_SCSI_CMD_OUT).  The two types are equivalent, the device
 does not distinguish between them:
 
 \begin{lstlisting}
-	#define VIRTIO_BLK_T_SCSI_CMD     2
-	#define VIRTIO_BLK_T_SCSI_CMD_OUT 3
+#define VIRTIO_BLK_T_SCSI_CMD     2
+#define VIRTIO_BLK_T_SCSI_CMD_OUT 3
 \end{lstlisting}
 
 The cmd field is only present for scsi packet command requests,
@@ -3241,12 +3241,12 @@ data and outgoing characters are placed in the transmit queue.
   acknowledging the feature.
 
 \begin{lstlisting}
-	struct virtio_console_config {
-		le16 cols;
-		le16 rows;
-		le32 max_nr_ports;
-		le32 emerg_wr;
-	};
+struct virtio_console_config {
+        le16 cols;
+        le16 rows;
+        le32 max_nr_ports;
+        le32 emerg_wr;
+};
 \end{lstlisting}
 
 \subsubsection{Legacy Interface: Device configuration layout}\label{sec:Device Types / Console Device / Device configuration layout / Legacy Interface: Device configuration layout}
@@ -3318,21 +3318,21 @@ when a port is closed or hot-unplugged.
   buffer and the events associated are:
 
 \begin{lstlisting}
-	struct virtio_console_control {
-		le32 id;    /* Port number */
-		le16 event; /* The kind of control event */
-		le16 value; /* Extra information for the event */
-	};
-
-	/* Some events for the internal messages (control packets) */
-	#define VIRTIO_CONSOLE_DEVICE_READY     0
-	#define VIRTIO_CONSOLE_PORT_ADD         1
-	#define VIRTIO_CONSOLE_PORT_REMOVE      2
-	#define VIRTIO_CONSOLE_PORT_READY       3
-	#define VIRTIO_CONSOLE_CONSOLE_PORT     4
-	#define VIRTIO_CONSOLE_RESIZE           5
-	#define VIRTIO_CONSOLE_PORT_OPEN        6
-	#define VIRTIO_CONSOLE_PORT_NAME        7
+struct virtio_console_control {
+        le32 id;    /* Port number */
+        le16 event; /* The kind of control event */
+        le16 value; /* Extra information for the event */
+};
+
+/* Some events for the internal messages (control packets) */
+#define VIRTIO_CONSOLE_DEVICE_READY     0
+#define VIRTIO_CONSOLE_PORT_ADD         1
+#define VIRTIO_CONSOLE_PORT_REMOVE      2
+#define VIRTIO_CONSOLE_PORT_READY       3
+#define VIRTIO_CONSOLE_CONSOLE_PORT     4
+#define VIRTIO_CONSOLE_RESIZE           5
+#define VIRTIO_CONSOLE_PORT_OPEN        6
+#define VIRTIO_CONSOLE_PORT_NAME        7
 \end{lstlisting}
 \end{enumerate}
 
@@ -3408,10 +3408,10 @@ guest memory statistics to the host.
   are always available.
 
 \begin{lstlisting}
-	struct virtio_balloon_config {
-		le32 num_pages;
-		le32 actual;
-	};
+struct virtio_balloon_config {
+        le32 num_pages;
+        le32 actual;
+};
 \end{lstlisting}
 
 \subsubsection{Legacy Interface: Device configuration layout}\label{sec:Device Types / Memory Balloon Device / Device configuration layout / Legacy Interface: Device configuration layout}
@@ -3507,16 +3507,16 @@ as follows:
   compatibility, unsupported statistics should be omitted.
 
 \begin{lstlisting}
-	struct virtio_balloon_stat {
-	#define VIRTIO_BALLOON_S_SWAP_IN  0
-	#define VIRTIO_BALLOON_S_SWAP_OUT 1
-	#define VIRTIO_BALLOON_S_MAJFLT   2
-	#define VIRTIO_BALLOON_S_MINFLT   3
-	#define VIRTIO_BALLOON_S_MEMFREE  4
-	#define VIRTIO_BALLOON_S_MEMTOT   5
-		le16 tag;
-		le64 val;
-	} __attribute__((packed));
+struct virtio_balloon_stat {
+#define VIRTIO_BALLOON_S_SWAP_IN  0
+#define VIRTIO_BALLOON_S_SWAP_OUT 1
+#define VIRTIO_BALLOON_S_MAJFLT   2
+#define VIRTIO_BALLOON_S_MINFLT   3
+#define VIRTIO_BALLOON_S_MEMFREE  4
+#define VIRTIO_BALLOON_S_MEMTOT   5
+        le16 tag;
+        le64 val;
+} __attribute__((packed));
 \end{lstlisting}
 
 \paragraph{Legacy Interface: Memory Statistics}\label{sec:Device Types / Memory Balloon Device / Device Operation / Memory Statistics / Legacy Interface: Memory Statistics}
@@ -3598,18 +3598,18 @@ targets that receive and process the requests.
   and cdb_size are writable by the driver.
 
 \begin{lstlisting}
-	struct virtio_scsi_config {
-		le32 num_queues;
-		le32 seg_max;
-		le32 max_sectors;
-		le32 cmd_per_lun;
-		le32 event_info_size;
-		le32 sense_size;
-		le32 cdb_size;
-		le16 max_channel;
-		le16 max_target;
-		le32 max_lun;
-	};
+struct virtio_scsi_config {
+        le32 num_queues;
+        le32 seg_max;
+        le32 max_sectors;
+        le32 cmd_per_lun;
+        le32 event_info_size;
+        le32 sense_size;
+        le32 cdb_size;
+        le16 max_channel;
+        le16 max_target;
+        le32 max_lun;
+};
 \end{lstlisting}
 
 \begin{description}
@@ -3682,43 +3682,43 @@ consumed with no order constraints.
 Requests have the following format:
 
 \begin{lstlisting}
-	struct virtio_scsi_req_cmd {
-		// Read-only
-		u8 lun[8];
-		le64 id;
-		u8 task_attr;
-		u8 prio;
-		u8 crn;
-		char cdb[cdb_size];
-		char dataout[];
-		// Write-only part
-		le32 sense_len;
-		le32 residual;
-		le16 status_qualifier;
-		u8 status;
-		u8 response;
-		u8 sense[sense_size];
-		char datain[];
-	};
-
-
-	/* command-specific response values */
-	#define VIRTIO_SCSI_S_OK                0
-	#define VIRTIO_SCSI_S_OVERRUN           1
-	#define VIRTIO_SCSI_S_ABORTED           2
-	#define VIRTIO_SCSI_S_BAD_TARGET        3
-	#define VIRTIO_SCSI_S_RESET             4
-	#define VIRTIO_SCSI_S_BUSY              5
-	#define VIRTIO_SCSI_S_TRANSPORT_FAILURE 6
-	#define VIRTIO_SCSI_S_TARGET_FAILURE    7
-	#define VIRTIO_SCSI_S_NEXUS_FAILURE     8
-	#define VIRTIO_SCSI_S_FAILURE           9
-
-	/* task_attr */
-	#define VIRTIO_SCSI_S_SIMPLE            0
-	#define VIRTIO_SCSI_S_ORDERED           1
-	#define VIRTIO_SCSI_S_HEAD              2
-	#define VIRTIO_SCSI_S_ACA               3
+struct virtio_scsi_req_cmd {
+        // Read-only
+        u8 lun[8];
+        le64 id;
+        u8 task_attr;
+        u8 prio;
+        u8 crn;
+        char cdb[cdb_size];
+        char dataout[];
+        // Write-only part
+        le32 sense_len;
+        le32 residual;
+        le16 status_qualifier;
+        u8 status;
+        u8 response;
+        u8 sense[sense_size];
+        char datain[];
+};
+
+
+/* command-specific response values */
+#define VIRTIO_SCSI_S_OK                0
+#define VIRTIO_SCSI_S_OVERRUN           1
+#define VIRTIO_SCSI_S_ABORTED           2
+#define VIRTIO_SCSI_S_BAD_TARGET        3
+#define VIRTIO_SCSI_S_RESET             4
+#define VIRTIO_SCSI_S_BUSY              5
+#define VIRTIO_SCSI_S_TRANSPORT_FAILURE 6
+#define VIRTIO_SCSI_S_TARGET_FAILURE    7
+#define VIRTIO_SCSI_S_NEXUS_FAILURE     8
+#define VIRTIO_SCSI_S_FAILURE           9
+
+/* task_attr */
+#define VIRTIO_SCSI_S_SIMPLE            0
+#define VIRTIO_SCSI_S_ORDERED           1
+#define VIRTIO_SCSI_S_HEAD              2
+#define VIRTIO_SCSI_S_ACA               3
 \end{lstlisting}
 
 The lun field addresses a target and logical unit in the
@@ -3808,21 +3808,21 @@ The controlq is used for other SCSI transport operations.
 Requests have the following format:
 
 \begin{lstlisting}
-	struct virtio_scsi_ctrl {
-		le32 type;
-	...
-		u8 response;
-	};
-
-	/* response values valid for all commands */
-	#define VIRTIO_SCSI_S_OK                       0
-	#define VIRTIO_SCSI_S_BAD_TARGET               3
-	#define VIRTIO_SCSI_S_BUSY                     5
-	#define VIRTIO_SCSI_S_TRANSPORT_FAILURE        6
-	#define VIRTIO_SCSI_S_TARGET_FAILURE           7
-	#define VIRTIO_SCSI_S_NEXUS_FAILURE            8
-	#define VIRTIO_SCSI_S_FAILURE                  9
-	#define VIRTIO_SCSI_S_INCORRECT_LUN            12
+struct virtio_scsi_ctrl {
+        le32 type;
+...
+        u8 response;
+};
+
+/* response values valid for all commands */
+#define VIRTIO_SCSI_S_OK                       0
+#define VIRTIO_SCSI_S_BAD_TARGET               3
+#define VIRTIO_SCSI_S_BUSY                     5
+#define VIRTIO_SCSI_S_TRANSPORT_FAILURE        6
+#define VIRTIO_SCSI_S_TARGET_FAILURE           7
+#define VIRTIO_SCSI_S_NEXUS_FAILURE            8
+#define VIRTIO_SCSI_S_FAILURE                  9
+#define VIRTIO_SCSI_S_INCORRECT_LUN            12
 \end{lstlisting}
 
 The type identifies the remaining fields.
@@ -3831,32 +3831,32 @@ The following commands are defined:
 
   Task management function
 \begin{lstlisting}
-	#define VIRTIO_SCSI_T_TMF                      0
-
-	#define VIRTIO_SCSI_T_TMF_ABORT_TASK           0
-	#define VIRTIO_SCSI_T_TMF_ABORT_TASK_SET       1
-	#define VIRTIO_SCSI_T_TMF_CLEAR_ACA            2
-	#define VIRTIO_SCSI_T_TMF_CLEAR_TASK_SET       3
-	#define VIRTIO_SCSI_T_TMF_I_T_NEXUS_RESET      4
-	#define VIRTIO_SCSI_T_TMF_LOGICAL_UNIT_RESET   5
-	#define VIRTIO_SCSI_T_TMF_QUERY_TASK           6
-	#define VIRTIO_SCSI_T_TMF_QUERY_TASK_SET       7
-
-	struct virtio_scsi_ctrl_tmf
-	{
-		// Read-only part
-		le32 type;
-		le32 subtype;
-		u8   lun[8];
-		le64 id;
-		// Write-only part
-		u8   response;
-	}
-
-	/* command-specific response values */
-	#define VIRTIO_SCSI_S_FUNCTION_COMPLETE        0
-	#define VIRTIO_SCSI_S_FUNCTION_SUCCEEDED       10
-	#define VIRTIO_SCSI_S_FUNCTION_REJECTED        11
+#define VIRTIO_SCSI_T_TMF                      0
+
+#define VIRTIO_SCSI_T_TMF_ABORT_TASK           0
+#define VIRTIO_SCSI_T_TMF_ABORT_TASK_SET       1
+#define VIRTIO_SCSI_T_TMF_CLEAR_ACA            2
+#define VIRTIO_SCSI_T_TMF_CLEAR_TASK_SET       3
+#define VIRTIO_SCSI_T_TMF_I_T_NEXUS_RESET      4
+#define VIRTIO_SCSI_T_TMF_LOGICAL_UNIT_RESET   5
+#define VIRTIO_SCSI_T_TMF_QUERY_TASK           6
+#define VIRTIO_SCSI_T_TMF_QUERY_TASK_SET       7
+
+struct virtio_scsi_ctrl_tmf
+{
+        // Read-only part
+        le32 type;
+        le32 subtype;
+        u8   lun[8];
+        le64 id;
+        // Write-only part
+        u8   response;
+}
+
+/* command-specific response values */
+#define VIRTIO_SCSI_S_FUNCTION_COMPLETE        0
+#define VIRTIO_SCSI_S_FUNCTION_SUCCEEDED       10
+#define VIRTIO_SCSI_S_FUNCTION_REJECTED        11
 \end{lstlisting}
 
   The type is VIRTIO_SCSI_T_TMF; the subtype field defines. All
@@ -3878,24 +3878,24 @@ The following commands are defined:
   Asynchronous notification query
 
 \begin{lstlisting}
-	#define VIRTIO_SCSI_T_AN_QUERY                    1
-
-	struct virtio_scsi_ctrl_an {
-	    // Read-only part
-	    le32 type;
-	    u8   lun[8];
-	    le32 event_requested;
-	    // Write-only part
-	    le32 event_actual;
-	    u8   response;
-	}
-
-	#define VIRTIO_SCSI_EVT_ASYNC_OPERATIONAL_CHANGE  2
-	#define VIRTIO_SCSI_EVT_ASYNC_POWER_MGMT          4
-	#define VIRTIO_SCSI_EVT_ASYNC_EXTERNAL_REQUEST    8
-	#define VIRTIO_SCSI_EVT_ASYNC_MEDIA_CHANGE        16
-	#define VIRTIO_SCSI_EVT_ASYNC_MULTI_HOST          32
-	#define VIRTIO_SCSI_EVT_ASYNC_DEVICE_BUSY         64
+#define VIRTIO_SCSI_T_AN_QUERY                    1
+
+struct virtio_scsi_ctrl_an {
+    // Read-only part
+    le32 type;
+    u8   lun[8];
+    le32 event_requested;
+    // Write-only part
+    le32 event_actual;
+    u8   response;
+}
+
+#define VIRTIO_SCSI_EVT_ASYNC_OPERATIONAL_CHANGE  2
+#define VIRTIO_SCSI_EVT_ASYNC_POWER_MGMT          4
+#define VIRTIO_SCSI_EVT_ASYNC_EXTERNAL_REQUEST    8
+#define VIRTIO_SCSI_EVT_ASYNC_MEDIA_CHANGE        16
+#define VIRTIO_SCSI_EVT_ASYNC_MULTI_HOST          32
+#define VIRTIO_SCSI_EVT_ASYNC_DEVICE_BUSY         64
 \end{lstlisting}
 
   By sending this command, the driver asks the device which
@@ -3913,17 +3913,17 @@ The following commands are defined:
 
   Asynchronous notification subscription
 \begin{lstlisting}
-	#define VIRTIO_SCSI_T_AN_SUBSCRIBE                2
-
-	struct virtio_scsi_ctrl_an {
-		// Read-only part
-		le32 type;
-		u8   lun[8];
-		le32 event_requested;
-		// Write-only part
-		le32 event_actual;
-		u8   response;
-	}
+#define VIRTIO_SCSI_T_AN_SUBSCRIBE                2
+
+struct virtio_scsi_ctrl_an {
+        // Read-only part
+        le32 type;
+        u8   lun[8];
+        le32 event_requested;
+        // Write-only part
+        le32 event_actual;
+        u8   response;
+}
 \end{lstlisting}
 
   By sending this command, the driver asks the specified LUN to
@@ -3972,14 +3972,14 @@ as "events" in the rest of this section. Events have the
 following format:
 
 \begin{lstlisting}
-	#define VIRTIO_SCSI_T_EVENTS_MISSED   0x80000000
-
-	struct virtio_scsi_event {
-		// Write-only part
-		le32 event;
-		u8  lun[8];
-		le32 reason;
-	}
+#define VIRTIO_SCSI_T_EVENTS_MISSED   0x80000000
+
+struct virtio_scsi_event {
+        // Write-only part
+        le32 event;
+        u8  lun[8];
+        le32 reason;
+}
 \end{lstlisting}
 
 If bit 31 is set in the event field, the device failed to report
@@ -3993,7 +3993,7 @@ contents of the event field. The following events are defined:
 
   No event
 \begin{lstlisting}
-	#define VIRTIO_SCSI_T_NO_EVENT         0
+#define VIRTIO_SCSI_T_NO_EVENT         0
 \end{lstlisting}
 
   This event is fired in the following cases:
@@ -4014,11 +4014,11 @@ contents of the event field. The following events are defined:
 
   Transport reset
 \begin{lstlisting}
-	#define VIRTIO_SCSI_T_TRANSPORT_RESET  1
+#define VIRTIO_SCSI_T_TRANSPORT_RESET  1
 
-	#define VIRTIO_SCSI_EVT_RESET_HARD         0
-	#define VIRTIO_SCSI_EVT_RESET_RESCAN       1
-	#define VIRTIO_SCSI_EVT_RESET_REMOVED      2
+#define VIRTIO_SCSI_EVT_RESET_HARD         0
+#define VIRTIO_SCSI_EVT_RESET_RESCAN       1
+#define VIRTIO_SCSI_EVT_RESET_REMOVED      2
 \end{lstlisting}
 
   By sending this event, the device signals that a logical unit
@@ -4078,7 +4078,7 @@ contents of the event field. The following events are defined:
 
   Asynchronous notification
 \begin{lstlisting}
-	#define VIRTIO_SCSI_T_ASYNC_NOTIFY     2
+#define VIRTIO_SCSI_T_ASYNC_NOTIFY     2
 \end{lstlisting}
 
   By sending this event, the device signals that an asynchronous
@@ -4095,7 +4095,7 @@ contents of the event field. The following events are defined:
 
   LUN parameter change
 \begin{lstlisting}
-	#define VIRTIO_SCSI_T_PARAM_CHANGE  3
+#define VIRTIO_SCSI_T_PARAM_CHANGE  3
 \end{lstlisting}
 
   By sending this event, the device signals that the configuration parameters