h1. M3 ULCB

h2. Update FirmWare

See here
https://elinux.org/R-Car/Boards/M3SK#Flashing_firmware

h2. Sample

<pre>
R-Car Gen3 Sample Loader V5.13 2019.07.24
 For Salvator , Kriek , and StarterKit.(R-CarH3/R-CarM3)
 Board Judge     : Used Board-ID
 DDR_Init        : boardcnf[7] Salvator / Starter Kit (H3SIP_VER2.0-1rank)
 INITIAL SETTING : Starter Kit Premier / R-Car H3 ES3.0
 CPU / BOOT MODE : AArch64 CA57-CPU0 / CA57 Boot Mode (MD15:AArch64)
 DRAM            : LPDDR4 DDR3200
 DEVICE          : QSPI Flash(S25FS128) at 40MHz DMA
 BOOT            : Normal Boot
 BACKUP          : DDR Cold Boot
 jump to 0xE6330000

R-Car Gen3 MiniMonitor V5.13 2019.07.24
 Work Memory     : SystemRAM
 Board Judge     : Used Board-ID
 Board Name      : Starter Kit Premier
 Product Code    : R-Car H3 ES3.0

>xls2
===== Qspi/HyperFlash writing of Gen3 Board Command =============
Load Program to Spiflash
Writes to any of SPI address.
Please select,FlashMemory.
   1 : QspiFlash       (U5 : S25FS128S)
   2 : QspiFlash Board (CN2: S25FL512S)
   3 : HyperFlash      (SiP internal)
  Select (1-3)>
</pre>

h1. Files

"zip: m3sk-yocto410.zip":../../wiki/M3_ULCB/m3sk-yocto410.zip