--- Log opened Tue Jul 26 10:02:26 2016
10:02 -!- wsa_ [~wsa@p5099505f.dip0.t-ipconnect.de] has joined #periperi-io
10:02 -!- Irssi: #periperi-io: Total of 3 nicks [1 ops, 0 halfops, 0 voices, 2 normal]
10:02 -!- Irssi: Join to #periperi-io was synced in 0 secs
10:02 < wsa_> hiya
10:02 <@horms> hi
10:02 < uli___> hello
10:04 -!- neg [~neg@unaffiliated/neg] has joined #periperi-io
10:04 -!- morimoto [~user@relprex3.renesas.com] has joined #periperi-io
10:04 < morimoto> Hi
10:06 -!- shimoda [~shimoda@210.160.252.169] has joined #periperi-io
10:06 < wsa_> hello
10:06 -!- Irssi: #periperi-io: Total of 6 nicks [1 ops, 0 halfops, 0 voices, 5 normal]
10:06 < shimoda> i'm sorry for delay
10:07 < wsa_> all fine
10:07 < wsa_> i was also a bit late because my internet at home was broken
10:08 -!- Irssi: #periperi-io: Total of 6 nicks [1 ops, 0 halfops, 0 voices, 5 normal]
10:08 < morimoto> It seems your donations was not enough ?
10:08 -!- khiemnguyen [d2a0fca8@gateway/web/cgi-irc/kiwiirc.com/ip.210.160.252.168] has joined #periperi-io
10:08 < khiemnguyen> Hello everyone.
10:08 <@horms> hi
10:08 < wsa_> i thought the kami for internet was at the kanda temple near akihabara?
10:09 <@horms> good to know
10:09 < wsa_> so, let's start
10:09 < wsa_> a few of you already send the todo updates by mail
10:09 < wsa_> thanks for that
10:09 < wsa_> who has not done so, please do
10:10 < wsa_> and now let's try the condensed meeting
10:10 < wsa_> a) what have i done since last time
10:10 < morimoto> wsa_: I didn't, but I don't have
10:10 < neg> if I have no updates, do you wan't an email stating that? :-)
10:10 < wsa_> b) what i plan to do till next time
10:10 < wsa_> c) problems i have currently
10:10 < wsa_> yes, i like those, too
10:11 < wsa_> just to align that we both think there are no tasks pending ;)
10:11 < neg> ok, my bad then. Will do so in future
10:11 < wsa_> or so i know neg didn't have time yet to work on the CMA issue
10:12 < wsa_> ok, first one today: simon
10:12 <@horms> sure
10:12 <@horms> i have been working on tracking down timeouts during srd104 tuning
10:13 <@horms> that was a)
10:13 <@horms> b) I will continue doing the same as the cause seems elusive: i found a new lead in the past hour so perhaps i have it now!
10:13 <@horms> c) none
10:13 < wsa_> b) YAY!
10:14 < wsa_> shimoda-san, your turn
10:15 < shimoda> yes
10:15 < shimoda> 1) update renesas_usbhs driver for m3w and some bugfix
10:16 < shimoda> 2) i will submit some patches for renesas_usbhs, phy, usb-dmac that are related to bugfix after v4.8-rc1 was released
10:16 < shimoda> oops 1) is a), 2) is b)
10:17 < wsa_> :) I translated that
10:17 < shimoda> :)
10:18 < shimoda> c) i still have a problem about usb2 + ipmmu and usb3 host suspend, but i have no update for now
10:18 < shimoda> s/a problem/problems/
10:18 < wsa_> good to know nonetheless
10:18 < wsa_> thank you
10:19 < wsa_> morimoto: your full report now ;)
10:19 < morimoto> I think I have no task for I/O
10:20 < morimoto> I worked but for multimedia
10:20 < wsa_> yes, you are our paperwork hero currently
10:20 < morimoto> Hehe :)
10:20 < wsa_> :)
10:21 < wsa_> uli___: your turn
10:21 < uli___> for a)
10:21 < uli___> i checked out sdhi performance on lager, but it seems ok, and i have found no way to improve it
10:21 < uli___> for sd-over-msiof, i have found a bug in the msiof driver that keeps the cs-gpio from working
10:21 < uli___> but with that fixed, it still doesn't work :(
10:21 < uli___> b)
10:21 < wsa_> :(
10:22 < uli___> i'll check why it still doesn't work.
10:22 < uli___> geertu gave me hint about something that might be the culprit, i'll check that out
10:22 < uli___> c) see b)
10:22 <@horms> can i ask a question of uli__? later?
10:22 < uli___> sure
10:22 <@horms> I take it you were focusing on DMA performance, is that correct?
10:22 < uli___> yes
10:23 <@horms> Did you try the SDR104 patches?
10:23 < uli___> are they in renesas-drivers yet?
10:23 <@horms> I think so.
10:23 < uli___> then i have :)
10:23 <@horms> Lastly, what was the maximum transfer rate you observed (approximately)?
10:23 < uli___> 34,7 with sdr50
10:24 < uli___> but that's a limitation of the card, i think
10:24 < uli___> if i halve the sdhi frequency, we're at 22,something mb/s
10:24 < uli___> which is as close to maximum as you can get
10:24 <@horms> ok, thank. I have observed slightly higher than that but not much. 
10:24 < wsa_> thanks
10:24 < wsa_> i am next
10:24 <@horms> we can compare notes on cards offline if its helpful (i will be quiet now)
10:25 < wsa_> or maybe we schedule such discussion after the reporting part?
10:25 <@horms> that is fine too
10:25 < wsa_> i wanted to ask simon something after that, too :)
10:26 < wsa_> a) i worked on Gen3 SDHI last week. I couldn't get DMA to work before going to Japan, but it works now
10:26 < wsa_> there was a patch missing to set the max frequency, which i sent
10:27 < wsa_> b) i will keep on evaluating/testing all recent sdhi patches
10:27 < wsa_> and keep on working on additional tasks
10:28 < wsa_> and handle the things that are caused by current delays
10:28 < wsa_> c) my gen3 dma tests suggested 70mb/s while 50mb/s is the theoretical limit :D
10:28 < wsa_> i have to recheck my measurement it seems
10:29 <@horms> did you use dd ... iflag=direct?
10:29 < wsa_> don't have my test setup here
10:29 < wsa_> i definately dropped all caches before
10:29 <@horms> it probably doesn't explain 50 vs 70, but its also probably worth checking
10:30 < wsa_> khiem, you are next
10:30 < khiemnguyen> a) not much. I'm looking into in-house BSP to collect some points to update my patchset.
10:31 < khiemnguyen> b) Will send v2 next week.
10:31 < khiemnguyen> Also, if any tasks related to Suspend-to-RAM, I'm happy to support.
10:31 < khiemnguyen> c) none.
10:32 < khiemnguyen> a) and b) are about R-Car Gen3 Thermal driver.
10:33 < wsa_> shimoda: do you think khiemnguyen could assist you with suspend problems?
10:34 < khiemnguyen> wsa_: : shimoda: any emails about the issues have been sent ?
10:34 < shimoda> wsa_: does this mean about my usb3 host problem?
10:35 < shimoda> khiemnguyen: maybe no. but, i can explain it.
10:35 < shimoda> so, i will send an email later
10:35 < wsa_> cool
10:35 < wsa_> neg: last but not least
10:36 < neg> a) Started to look into ohci-pci CONFIG_DMA_CMA issue, no progress so far
10:36 < neg> b) Successfully trigger the issue described on v4.7
10:36 < neg> c) Summer hit Stockholm :-)
10:37 < uli___> what precisely does "summer" mean in swedish terms?
10:37 < wsa_> neg working from the public bath ;)
10:37 < wsa_> thank you!
10:37 < neg> I was not able to trigger the issue on v4.3-rc3 (version used where issue was found) nor on v4.7 but need to spend more time on it
10:38 < neg> wsa_: yes, do you know if Koelsch is water proof? :)
10:38 < wsa_> I'd like to ask Simon if he could describe his new findings in a sentence
10:38 < wsa_> but I'd think this is already the optional part of the meeting
10:39 < wsa_> neg: the c64 is, why shouldn't koelsch? ;)
10:39 <@horms> wsa_: I found several bugs/omissions in my reworking of the SDR code. Collectvely they seem to resolve the timeout problem. But I've thought that before so lets see how it looks in a day or so. (3 sentances, sorry)
10:40 < wsa_> neg: https://www.youtube.com/watch?v=5pb9yzfnbT0 (c64 runs 1 hour under water)
10:40 < wsa_> horms: thanks
10:41 < wsa_> btw my talks for LinuxCon Europe and ELCE in Berlin were both accepted
10:41 < wsa_> so see you guys there
10:42 < neg> wsa_: nice, grats
10:42 <@horms> congrats
10:42 < morimoto> congratulation
10:42 < uli___> what are they about?
10:44 < wsa_> LinuxCon: https://linuxconcontainerconeurope2016.sched.org/event/7oA4/kernel-development-i-still-think-we-have-a-scaling-problem-wolfram-sang-consultant
10:44 < wsa_> ELCE: making transparent how i work/decide as a maintainer
10:45 < wsa_> and how it differs from random developer expectations ;)
10:45 < wsa_> and ideas how to align all that
10:46 < wsa_> so, i gotta run now
10:46 < wsa_> thanks guys!
10:46 < neg> thanks all
10:46 <@horms> bye
10:46 < uli___> see you
10:47 < morimoto> wsa_: Actually, I'm sending Thermal patch to ML, but there is still no response from maintainer during 1 or 1.5 month
10:47 < shimoda> bye!
10:48 < morimoto> bye-cha!
10:48 < khiemnguyen> bye
10:52 < wsa_> morimoto: tickle him with chopstick katana ;)
10:52 < wsa_> cya!
--- Log closed Tue Jul 26 10:52:56 2016