title: upport minor patches from BSP5.1x
team: IO
key: fe4c468c-a792-11ec-b2cf-277cd07b4273
assignee: Wolfram
status: Done

bsp51x:
 - 1972823ec8b56a4fcaa812c5e284c3348ecebedd # arm64: dts: r8a77961: Add CAN-FD support
 - 20b262b3005d1a00997a6a04736ecb1a61a50fc9 # arm64: dts: renesas: r8a77961: Add i2c aliases
 - f479c5a4e5e5e2299999003486070015f5d5750d # pinctrl: renesas: r8a77990: Add driver-strength for R8A77990
 - f0bccada93d7eb7ca3080eebe79fa03f8032e4a4 # pinctrl: renesas: r8a77990: Remove pullup/pulldown for USB30_OVC pin

upstream:
 - torvalds: 0182581a9f63764bcbdbc68e98881b50e03fc4c4 # arm64: dts: renesas: r8a77961: Add CAN-FD node
 - torvalds: 2130ac189251ea479da985142e5cc8f0ee7c6107 # pinctrl: renesas: Allow up to 10 fields for drive_regs
 - torvalds: 843394c61e9a71f0fb340a08b28cb42695baa929 # pinctrl: renesas: r8a77990: Add drive-strength
 - next: 59c148535324e1fc61a0cad6d04559196dde5ed1 # arm64: dts: renesas: r8a779{51|60|65}: put I2C aliases to board files
 - next: 8cc5dcfabab8cfe9dd5a4386b64f0562399e3139 # arm64: dts: renesas: r8a77970: put I2C aliases to board files
 - next: efab8210e015f9078001099552058b3c38b123b0 # arm64: dts: renesas: r8a77980: put I2C aliases to board files
 - next: fb2a16097c3cc660788cddae96dc2c44cd4502b6 # arm64: dts: renesas: r8a77990: put I2C aliases to board files
 - next: 1d35135672c9c5e883eabb3b0288822cac79ac1f # arm64: dts: renesas: r8a779a0: put I2C aliases to board files
 - next: 13079557ec9775ce4208d3066c415a0ab7ca170e # arm64: dts: renesas: r8a774a1: put I2C aliases to board files

comments:

 - 1972823ec8b56a4fcaa812c5e284c3348ecebedd
   - v1 sent
   - merged
   - done

 - 20b262b3005d1a00997a6a04736ecb1a61a50fc9
   - v1 sent
   - needs different handling; aliases should go to board files if the schematics have explicit names for I2C busses
   - sent out patches to move aliases to board files, discussion on-going
   - sent v2 of these patches
   - all merged
   - done

 - f479c5a4e5e5e2299999003486070015f5d5750d
   - v1 sent
   - v2 sent, adding RZ/G2E
   - merged
   - done

 - f0bccada93d7eb7ca3080eebe79fa03f8032e4a4
   - no need to upport; only pull-up is implemented which matches the datasheet for Gen3 V2.0 and onwards
   - done