title: SDHI; upport BSP patches
team: IO
key: fe6714da-a9b4-11eb-a028-6bbd20fa8e8a
status: New
assignee: Wolfram

bsp41x:
 - 0237478dc67b71ff92082e06323c015631098b71 # arm64: dts: r8a77980-v3hsk: Enable onboard eMMC
 - c2ca1ccb83afd7c790ae361c720d257e050483f2 # mmc: core: Issue power off notification in mmc_remove()
 - 5d60e36aaa96fa39d1a524cc4ff373c0f36616e0 # mmc: renesas_sdhi: reset calibration register
 - 73405fef502d43737be9a50d29935bee133fe7ab # mmc: renesas_sdhi: Add internal DMA transfer end
 - 20e5623df1aaa74301675122b910f063cdcabe7e # mmc: tmio: Add internal DMA transfer end

bsp51x:
 - 1f8eaa32650a2f67cc318f39c603f2c8282831a4 # arm64: dts: r8a77980-v3hsk: Enable onboard eMMC
 - e533a0ea555e061170b4102d9085c70546fe4768 # mmc: core: Issue power off notification in mmc_remove()
 - 15d7abbfc3f0dae379821824135d94a4f865a449 # mmc: renesas_sdhi: reset calibration register
 - 53c3958c01961421cd2b70c3dfebc9f391e00192 # mmc: renesas_sdhi: Add internal DMA transfer end
 - e54e9682fbc229e7a168d63b2e49bc174353caed # mmc: tmio: Add internal DMA transfer end

upstream:

comments:
 - 0237478dc67b71ff92082e06323c015631098b71
   - do we have V3H hardware in Magnus lab?
   - Magnus so far has only a Condor board, but not v3hsk
 - c2ca1ccb83afd7c790ae361c720d257e050483f2
   - https://patchwork.kernel.org/project/linux-mmc/patch/1605005330-7178-1-git-send-email-yoshihiro.shimoda.uh@renesas.com/
 - 5d60e36aaa96fa39d1a524cc4ff373c0f36616e0
   - before calling 'renesas_sdhi_adjust_hs400_mode_disable()', change the if to 'if (gen3)'?
 - 73405fef502d43737be9a50d29935bee133fe7ab
   - Only for H3/M3-W ES1.0, but why does mainline work?
 - 20e5623df1aaa74301675122b910f063cdcabe7e
   - Why does mainline work without it?