title: upport patches from BSP4.1x which need a KingFisher board
team: IO
key: e677a0bc-b240-11eb-9028-d780c321b8b2
status: New

bsp41x:
 - 6ef5ce0f8c690cb8b7697e18f5c20813d143d60f # i2c: mix: pca954x: reset mux in case of error during bus (de)select
 - 2ab29c7beb545e8d4e91714baf96d5a2c10e5c4d # pci: pcie-rcar: add regulators support
 - 98939bc36e84658cded034a2ac323dd134096410 # ti-st: add device tree support
 - 268e22e8b2b0f066d3a5cef85fbef9692c796c25 # ti-st: use proper way to get shutdown gpio
 - ad3078fd5f62e2c48ba16e91ea0cf18559a72641 # btwilink: add minimal device tree support
 - e3dc6076bf1e243587d5a8772076b28bea3fc259 # wl18xx: do not invert IRQ on WLxxxx side
 - 45c7178570251b4a90d2d5b3d16e4cbac9621a16 # nvme: Workaround Samsung 970 Pro power state issues
 - a6c6f67592709f9c1e5cdc79ff29fb583afb362e # IIO: lsm9ds0: add IMU driver
 - 836e84d18310ae121977be35a0f8a6648d53aefe # arm64: dts: renesas: ulcb-kf: deselect GP5_9 interrupt
 - aff48242492b441213404874c9abac4182990df9 # arm64: dts: renesas: ulcb-kf: update for Yocto4.1.0
 - d01291e2e1b906deb6ea3fc9e8c13ee8061350b7 # arm64: dts: renesas: ulcb-kf: Add ov5647 support
 - 3026989c751e262ad800f1956ec78f240cb8d052 # arm64: dts: renesas: Add ulcb-kf-imx219 overlay
 - 08c5882b168a32ff551a4651701e29e20f7ccf6e # arm64: dts: renesas: Add r8a7796-m3ulcb-2x4g-kf.dts

bsp51x:
 - 330a818d4f1c9bc5cca6b5c34481d89929a46163 # PCI: rcar: Add regulators support
 - 54a27daa89bf626d668542016557de849dfa77e7 # arm64: dts: renesas: ulcb-kf: Add ov5647 support
 - 61587a30176fa0b909a9470806097f8d8d86a423 # arm64: dts: renesas: ulcb-kf: deselect GP5_9 interrupt
 - 0e06dd4aef4a2507c5e93eb57e87a9c6cfc5b053 # arm64: dts: renesas: ulcb-kf: update for kernel v5.10
 - 0dc1d623867fa677bdcf82ea7b597fce2455de7d # arm64: dts: renesas: Add ulcb-kf-imx219 overlay

upstream:
 - torvalds: 6731ca3999ffa4c878a661b980759300dfb0237e # iio: st_sensors: Add lsm9ds0 IMU support

comments:
 - only Laurent has a KF board currently which is not available with remote access.
 - most patches here need physical access, though
 - Wolfram got ULCB + KingFisher now from Laurent
 - ULCB is bricked because of wrong firmware and needs to be unbricked first

 - a6c6f67592709f9c1e5cdc79ff29fb583afb362e
   - another driver went upstream meanwhile with accelerometer and magnetometer
   - angular rate sensor might be missing, need to check
   - also need to check if this is needed