title: "BSP 5.1.x upport non targets"
team: Core
key: 073e0872-f1a4-44df-be1d-d78ee84cb663
status: Done
assignee: BSP

bsp51x:
 - 29249f77a1d68ff9f25ff3f00a1ea3e23f00314f # Revert "arm64: dts: renesas: r8a77951: Add RPC device node"
 - b937fdd0f75a8212579f8896f15b07ee3188cc78 # Revert "arm64: dts: renesas: r8a7796{0,1}: Add RPC device node"
 - e1ebff2c4b05f44a4270d81cf7b977ee86b8367c # Revert "arm64: dts: renesas: r8a77965: Add RPC device node"
 - 3def53d33d24e5c8ee25e5a1f0a37b2ef7545ec3 # Revert "arm64: dts: renesas: ulcb: Add RPC HyperFlash device node"
 - e6b0d6c88f0463ac9b62d1294d566d30a217d074 # Revert "arm64: dts: renesas: salvator-common: Add RPC HyperFlash device node"
 - 70dcb91a75026d60548cc74486444b6f174fd847 # Revert "net: phy: consider that suspend2ram may cut off PHY power"
 - c758dba3bcb57d5c0f6c40f95f7c136b7ece08b0 # Revert "cpufreq: Remove CPUFREQ_ADJUST and CPUFREQ_NOTIFY policy notifier events"
 - 5503dbdc93a7318fe318492afb6e68dfd5ac1e4a # Revert "drm/rcar-du: Convert to the new generic alpha property"
 - 300462a663ba0047774c15ef81473bcdef36c089 # Revert "ravb: RX checksum offload"
 - 00042f4ae3ae6a4af363ed0062e134b58cfb3ccd # arm64: dts: renesas: r8a77990-es10-ebisu: add full-pwr-cycle-in-suspend into eMMC nodes
 - de9512feec37ad2669720065170dd9ab55fc5f67 # iommu/ipmmu-vmsa: Allow SDHI devices
 - 105dea40fe93d993a0ad57f796363823eb07dcd9 # iommu/ipmmu-vmsa: Refactor ipmmu_of_xlate()
 - f0065fef6fd7db34465aa843c5ec36b299cefb55 # mmc: core: clear flags before allowing to retune
 - a82ac3863b8b0bcdccafabe981edfd5194336a45 # mmc: Improve function name when aborting a tuning cmd
 - bea95cd702dcd05cfb0a88d2c154d221a2673f63 # mmc: renesas_sdhi: abort tuning when timeout detected
 - 00e063d55deda9e108bffd828dc87127e2af911f # mmc: renesas_sdhi: Fix HS400 on R-Car M3-W+
 - 7c248fce7038a4858bb360b9c75e0a721736b197 # mmc: tmio: always restore irq register
 - 888c15b0f8e279043e5b5a3d1839ac931555b6bd # mmc: tmio: always flag retune when resetting and a card is present
 - 7d536ff69de31d4b254d16639aa0447f71fb9190 # mmc: tmio: restore bus width when resetting
 - e51b8f3ad68fca77c59e6f05ee2194630ed39215 # mmc: renesas_sdhi: break SCC reset into own function
 - f09235e4585c445ab94ba4ac3a1c833ef2ab3490 # mmc: tmio: abort DMA before reset
 - d6c50e9d7a29569a5b34f9e5f50023c010b8c10f # mmc: renesas_sdhi: use custom mask for TMIO_MASK_ALL
 - 26a3eb94f1256a370e856a41d690ea4eb0bad984 # mmc: tmio: support custom irq masks
 - 97ce6d64a1c5f06afa069a88f8f919d9a11eecd3 # mmc: renesas_sdhi: Add a condition of cmd/data timeout for retune
 - 84cc58734d3f85582136cf544fb21a5d8a04a493 # mmc: tmio: Add data timeout error detection
 - 2f169b8784285e09e124726b73bc02f5c579038b # mmc: renesas_sdhi: populate hook for longer busy_wait
 - f9a83c1eade0dbcf35fd375cfe1501d262223196 # mmc: tmio: add hook for custom busy_wait calculation
 - 3c4de87a43001db4ba14feaf7aa33af5940619b3 # mmc: tmio: set max_busy_timeout
 - 3a8317bc3bd66e8e09b54b2d174e41314404297e # mmc: tmio: Fix command error processing
 - 4f2329f337de810e3582090a750641926ca9e890 # mmc: tmio: do not print real IOMEM pointer
 - e2eb2e407661ed5eeabc81e7c840f63479bbd137 # mmc: renesas_sdhi: sort includes
 - 7b7a1569db8ac343eac4e4ddf62fc7cfc5dcf2dd # mmc: renesas_sdhi: don't hardcode SDIF values
 - e94f95076969c867b1e002366eee39590a6f5657 # mmc: renesas_sdhi: improve HOST_MODE usage
 - 8f9a7674fc8b7f87dff4dc3bf1d389e04153814f # mmc: renesas_sdhi: remove superfluous SCLKEN
 - 8e44430656543c5100118246f971dbfa735ca5cf # mmc: renesas_sdhi: merge the SCC reset functions
 - 2ae945b5ab91443dd65dafda1fa01a26abe0d192 # mmc: renesas_sdhi: clear TAPEN when resetting, too
 - 16a20c6bf9a4a910f3e062dea00b6aadd66260a2 # mmc: renesas_sdhi: simplify reset routine a little
 - 2dccaad27a595754615e28ada7e523c456bd9ff0 # mmc: renesas_sdhi: populate SCC pointer at the proper place
 - 113331383d18df3b4a913fa8f19a4c31685151da # mmc: renesas_sdhi: probe into TMIO after SCC parameters have been setup
 - 69d869027d1ffbf6facf184d011e4de747ae6f42 # mmc: renesas_sdhi: only reset SCC when its pointer is populated
 - 95e683efe93af21c45284648c3cc6d28ff4f944c # ASoC: rsnd: adg: clearly handle clock error / NULL case
 - 78fbf1aae24b9a11bc216170cc36335267cce495 # ASoC: rsnd: check for zero node count
 - 4f458bde7bdb43a39fd69398024d158687f26715 # ASoC: rsnd: tidyup __rsnd_mod_xxx macro comments
 - 16271853f0d2af0a25d6673d2511343713174531 # ASoC: rsnd: adg: check return value for rsnd_adg_get_clkin/out()
 - f278fa192b51032086d0f14f0e32335dd3cf88bc # ASoC: rsnd: adg: use more simple method for null_clk
 - 020fd500a2b4738bb5c86eee905ffaf35429469d # ASoC: rsnd: adg: tidyup rsnd_adg_get_clkin/out() parameter
 - 8ad3856fdf1aac89d80f6e079c31505849abe4d2 # ASoC: rsnd: adg: supply __printf(x, y) formatting for dbg_msg()
 - cb510ac2e29623fadeb15f31a5372d17753efa36 # ASoC: rsnd: adjust disabled module
 - 8bced13512246ebba8cf0041de998bba25a67444 # ASoC: rsnd: tidyup rsnd_parse_connect_xxx()
 - 2ade53d34ca8dbef33055049b5e9fdbc0a6333fc # ASoC: rsnd: tidyup rsnd_dma_request_channel()
 - f64140ebf72b3a9f2901f6e87ee3388321e19203 # ASoC: rsnd: tidyup rsnd_parse_connect_common()
 - 21317da7788cd7d64612b83064c283b781674d97 # ASoC: rsnd: tidyup rsnd_ssiu_busif_err_irq_ctrl()
 - 910784cf66917fd118320f02839d58fa3df626c1 # ASoC: rsnd: tidyup rsnd_ssiu_busif_err_status_clear()
 - 5cacdcd5db1b8dd0e08135c775d65793847e65db # ASoC: rsnd: implement BUSIF related code in ssiu.c
 - 12f91b1748c2b5c128648bb76444c476b6f4e57b # ASoC: rsnd: protect mod->status
 - 0079c31fc51a065fac50892da52dc5dd333178d2 # ASoC: rsnd: add debugfs support
 - 702668ac1ef1fcb4ba3972996521765304f3c66a # ASoC: rsnd: incidate irq error message
 - b0ffbeae442825515758b5e26ad9098ff5353873 # ASoC: rsnd: indicate unknown error at rsnd_dai_call()
 - ce15883144eca7237291934ed75ed360b05e2de1 # ASoC: rsnd: check BUIF error everytime
 - 9d971d866bb545311c9123711447ed2f3f0220f9 # ASoC: rsnd: attach SSIU when SSI was DMA mode
 - 2d78d76e1c0019dc433759017ce3f12c68db9835 # ASoC: rsnd: ignore runtime NULL case at rsnd_runtime_channel_original_with_params()
 - a694d40166d6b4b7495fd5e55bc6c1381ff8bdc5 # ASoC: rsnd: call unregister for null_hw when removed
 - 135eecedcd120d9ff380baedfac233b7da09c85f # ASoC: rsnd: add null CLOCKIN support
 - 507f0ea8992d8f85498135774a864874574c628f # ASoC: rsnd: tidyup loop on rsnd_adg_clk_query()
 - 840ca5af0427ef9b2f89138ee795fca737d69cdd # ASoC: rsnd: add usage for SRC
 - 98c32a442df54b5857c564d247da2a96dd39ff4e # ASoC: rsnd: add rsnd_ssi_busif_err_irq_enable/disable()
 - 3435ebffcb5e14bf65ecfa7f1649985c2b05e0de # ASoC: rsnd: add rsnd_ssi_busif_err_status_clear()
 - 7f0affb7f690a046080b86d2913c7bf026523f8b # ASoC: rsnd: cleanup ppcheck warning for adg.c
 - b681e631f16259e4db779dabf1644e5ad5ff6bd2 # ASoC: rsnd: cleanup ppcheck warning for cmd.c
 - ced62cc3daf47d4479ab7e6ded10aa956f5ca874 # ASoC: rsnd: cleanup ppcheck warning for core.c
 - 956531c3934c6130ade49cf24f3bf35c9d7a5f6b # ASoC: rsnd: cleanup ppcheck warning for ssi.c
 - 49717c52cf25bada69154cecff2c630c713fb6a7 # ASoC: rsnd: cleanup ppcheck warning for ssiu.c
 - ceb20389b3804394c1492475838e028c35bb7471 # ASoC: sh: rcar: ssi: remove redundant assignment
 - 7912dbc7012065e60fe2ae87bed4f15df15fbfbe # ASoC: sh: rcar: ctu: add missing error check
 - 38dd149937e0d50253c2786007febe9805c432d4 # ASoC: sh: rcar: simplify return
 - 9252d10d529c7b718d3fb08b9ef698e6c76fcd40 # ASoC: sh: rcar: align function prototypes
 - 92288e352454869738ec7f005e2a9c1abdf053be # ALSA: Convert strlcpy to strscpy when return value is unused
 - d2af7c5ed1549a80c90d8b07090c48ddc36e5150 # ASoC: rsnd: don't call clk_disable_unprepare() if can't use
 - 8e1366c657e5f1b6f553a0960540c8e1283ae8de # clk: renesas: r8a77995: Add ZA2 clock
 - 9c3ded731fd9024912ca964e4a7b15bcce312d1a # clk: renesas: r8a77995: Add ZA2 clock
 - 246ae2ee8e7648f886d1dee8de5f41fe9bd9f8bc # clk: renesas: rcar-gen3: Add boost support to Z clocks
 - 663c99cd8abf286bfa4301c806d1f668af90b8a1 # clk: renesas: rcar-gen3: Increase Z clock accuracy
 - 5cdd24ad6bca6476ef6ce0509046caab71d7c67c # clk: renesas: rcar-gen3: Grammar s/dependent of/dependent on/
 - e30cf7097fafdfd28d43f9ebb63288f81ea97e2e # clk: renesas: rcar-gen3: Remove superfluous masking in cpg_z_clk_set_rate()
 - 24d0a11e91339cabe561fd86e7cec53df83fc439 # clk: renesas: rcar-gen3: Make cpg_z_clk.mask u32
 - 622e1afe2f5f919e645ed14a6544f7aa311f5201 # clk: renesas: rcar-gen3: Update Z clock rate formula in comments
 - f91fa5b6ce87fb323d4919bb2053638c4e51154a # arm64: dts: renesas: Add port@0 node for all CSI-2 nodes to dtsi
 - 55e256ec392f3effceb1ab3f4717f93d11486a2e # arm64: dts: renesas: salvator-common: Add cpu-supply property to a57_0 node
 - 90f9f3245267dc7039282743b52b4119a95520b4 # usb: gadget: udc: renesas_usb3: Fix a race in usb3_start_pipen()
 - 9328612bed27057bdb4647c7f52ae83d8be8d0d9 # pinctrl: renesas: Move R-Car bias helpers to sh_pfc.h
 - be474b740769ba9d9e9e7622d3d1038d0cf81658 # pinctrl: renesas: Make sh_pfc_pin_to_bias_reg() static
 - d123bd5e2e585f187119f224ad2a3bf589a031a1 # pinctrl: renesas: r8a77965: Add vin4_g8 and vin5_high8 pins
 - 4082274d71e77da113aea612b27daaf4dc0ec2ed # pinctrl: renesas: r8a77990: Add vin4_g8 and vin5_high8 pins
 - 58c67d6ada5f85359378159da52f03cf7aa86883 # pinctrl: renesas: r8a7796: Add vin4_g8 and vin5_high8 pins
 - 1ede59f39bced967ca3509d4beaa34f28a538b61 # pinctrl: renesas: r8a77951: Add vin4_g8 and vin5_high8 pins
 - 8ad36c559a2a9b2351391da734c056efca9cbda3 # pinctrl: renesas: r8a779a0: Add TPU pins, groups and functions
 - f83ec8babbc335f8463d14c2a663e11e229983ba # pinctrl: renesas: r8a779a0: Add TMU pins, groups and functions
 - 330f88c50247ddd237072e0aeb78ddb0f41002d8 # pinctrl: renesas: r8a779a0: Add QSPI pins, groups, and functions
 - 751784d70d345f20ff569c318e7bdbfafb198c7b # pinctrl: renesas: r8a779a0: Add PWM pins, groups and functions
 - 567b510cb7a6b06fa7a83130b8535c6506810293 # pinctrl: renesas: r8a779a0: Add MSIOF pins, groups and functions
 - 66be8b564693414cf4de33c0ac8bad953bb8c18d # pinctrl: renesas: r8a779a0: Add MMC pins, groups and functions
 - 96669ce57fb6799e69ee9d917db2abdfc2253c53 # pinctrl: renesas: r8a779a0: Add INTC-EX pins, groups and function
 - cbe80c594469289bf4826798602f86617394f3ab # pinctrl: renesas: r8a779a0: Add HSCIF pins, groups and functions
 - c167348ab742a4e635b49e2edd3b6582ef19685a # pinctrl: renesas: r8a779a0: Add DU pins, groups and function
 - c460c6f2a38da9aa0c0439e82b09924d26a033aa # pinctrl: renesas: r8a779a0: Add CANFD pins, groups and functions
 - 898e0a025218beeb836ea74622150f94a86d8d91 # pinctrl: renesas: r8a779a0: Add EtherAVB pins, groups and functions
 - 45fd0c063865bbc6dca4726cf370e19219d0711b # pinctrl: renesas: r8a779a0: Add I2C pins, groups and functions
 - 257a378feb4b335e60b2380d164384f3883d3ea4 # pinctrl: renesas: r8a779a0: Add SCIF pins, groups and functions
 - a0486aced1efb75ee905c87fb273fa40ff99028b # pinctrl: renesas: Initial R8A779A0 (V3U) PFC support
 - 7feec3ba5789e89c956fe91ecf6e7e697b0ef360 # pinctrl: renesas: Add PORT_GP_CFG_{2,31} macros
 - 4b3bb0a449d001c71233881026f83b6febb77492 # pinctrl: renesas: Add I/O voltage level flag
 - 85d312969a059162b538a8741f6790e35d9e89b6 # pinctrl: renesas: Implement unlock register masks
 - 2b136e9943aba6b9bec835d634e9dbbdf0dac8f0 # dt-bindings: pinctrl: renesas,pfc: Document r8a779a0 PFC support
 - b21df9b3bd92f10c4892988ee1ee8865bc32a0ca # pinctrl: renesas: checker: Restrict checks to Renesas platforms
 - a87fae07f597dbda6995b7f0ff61acc446a8631d # pinctrl: renesas: r8a77965: Add QSPI[01] pins, groups and functions
 - 0dab3fc0983af40741a86b3ad04c12a0f8122ab0 # pinctrl: renesas: r8a7796: Add QSPI[01] pins, groups and functions
 - c4b1905bb4f1c67057e0e588cf1f58ce45002b8d # pinctrl: renesas: r8a77951: Add QSPI[01] pins, groups and functions
 - 3acc78d4ceb622683509386467cba3dad9577e5a # pinctrl: renesas: r8a77990: Add QSPI[01] pins, groups and functions
 - da3a76e4ed94ef955865c6224b74165fe0f80877 # pinctrl: renesas: r8a77990: Optimize pinctrl image size for R8A774C0
 - ce3047eee9484896de8cf12cb0d99f132797b6f7 # pinctrl: renesas: r8a77965: Optimize pinctrl image size for R8A774B1
 - 7eee99f1038ca7d6d154aa8b8b62983251d8b760 # pinctrl: renesas: r8a7796: Optimize pinctrl image size for R8A774A1
 - a5c01c0712c8f03c6c27d1e0d8ed41a3db45023d # pinctrl: renesas: r8a77951: Optimize pinctrl image size for R8A774E1
 - d44863482c22fae82ae79bf07adea2037b2b869c # pinctrl: renesas: Protect GPIO leftovers by CONFIG_PINCTRL_SH_FUNC_GPIO
 - 70c43f533bc74596f03504a1fce0f9496ba022f3 # pinctrl: renesas: Factor out common R-Car Gen3 bias handling
 - 74bf73038fae7ebe3065e77d06160923dfb13d8b # pinctrl: renesas: Optimize sh_pfc_pin_config
 - fb2e5363a69a288b0910d2986e795523057df7c8 # pinctrl: renesas: Reorder struct sh_pfc_pin to remove hole
 - b46fd0387aed531e4e5a5559f5c290b9c808a368 # pinctrl: renesas: Singular/plural grammar fixes
 - 2a5bac7301aca7149189dce0c621f198d6f4d776 # pinctrl: renesas: Remove superfluous goto in sh_pfc_gpio_set_direction()
 - 3c87e487aa882dd268a4ffce157fda193369e813 # clk: renesas: Zero init clk_init_data
 - 2766b1bde0d19da3f350aafc63ac82e049af8e8b # clk: renesas: rcar-gen3: Factor out CPG library
 - d0f0cb5fe8c9b250022c507b94f582c69d0afcf2 # clk: renesas: rcar-gen3: Remove cpg_quirks access when registering SD clock
 - 54ddeeb98619390b1dced1bae5869f69f65741d6 # clk: renesas: r8a779a0: Add CMT clocks
 - 4a52735d26d020ed10a266e2119a2a1095f4f1a0 # clk: renesas: r8a7795: Add TMU clocks
 - de76763fcd69e14b34087682344b6d5f5aaa6925 # clk: renesas: r8a779a0: Add TSC clock
 - 31a4b0c8cfbb33b0a14042202d77de5c68f3a7a0 # clk: renesas: r8a779a0: Add TMU clocks
 - d53bcb44b6c62d6bf8110d30ab7608d1a6ac6516 # clk: renesas: r8a77965: Add DAB clock
 - 913e086ccf2227577c2f4c9caecba1e850c92748 # clk: renesas: r8a77990: Add DAB clock
 - cfaf9b3a55588f304e494e88a7308eb3bacf7b8a # clk: renesas: cpg-mssr: Fix formatting issues for 'smstpcr_saved's documentation
 - e40111f897599dc00a37a2715b3afd264a29d611 # clk: renesas: r8a779a0: Add RAVB clocks
 - 72176a6caa955fcb99681f150b861fe16d6c0451 # clk: renesas: r8a779a0: Add I2C clocks
 - d5e0df52e1151d1a4788bf7ee755b1c8e4adea12 # clk: renesas: r8a779a0: Add SYS-DMAC clocks
 - 2966891cf6234d7237d72de8b4408f0f191cde6e # clk: renesas: r8a779a0: Add SDHI support
 - b8cece93b55ae4644d6083e092f355831f2d63ba # clk: renesas: r8a779a0: Add MSIOF clocks
 - 4eae29b224cf19d24e545e1eead6897d4e7ac99d # clk: renesas: r8a779a0: Add PFC/GPIO clocks
 - 10baf5f1aca6d0689a0b2329f2c9742a04858262 # clk: renesas: r8a779a0: Add HSCIF support
 - e8300b570dd98c0531ca31c5b66ed7dbf52754a9 # clk: renesas: r8a779a0: Add RWDT clocks
 - fbdbdd4c7d7782a9afa1da37eb99492e6ce07b67 # clk: renesas: r8a779a0: Add VSPX clock support
 - 177c1d552c8f94f9c28c8f066f63f3464a7e1933 # clk: renesas: r8a779a0: Add VSPD clock support
 - 35f77120bddf0132758288b1b832962745dfc66b # clk: renesas: r8a779a0: Add FCPVD clock support
 - cb1c51506214caa03ebd1fb81a7cd9afc848a882 # clk: renesas: r8a77995: Add TMU clocks
 - 0f0cf1d59ec77554cfebf7afb68dd5001a7bc29a # clk: renesas: r8a77990: Add TMU clocks
 - 6bc480d14a7034b63ba4660299b415f67a0ac313 # clk: renesas: r8a77965: Add TMU clocks
 - cb8f5a2733cd6be1c60d64876783d0740f8394b0 # clk: renesas: r8a7796: Add TMU clocks
 - 5c09f5e97d75c25b2aaf4b498b7926d2a075c070 # clk: renesas: cpg-mssr: fix kerneldoc of cpg_mssr_priv
 - 94981fc964dce70d483f8b970061c8cbacb9c97b # clk: renesas: rcar-usb2-clock-sel: Replace devm_reset_control_array_get()
 - 466e2c51406072dae9ac64e911747c18237fc97e # clk: renesas: r8a779a0: Add VIN clocks
 - 13b71f7aeb6066b7b0e3dae60c932fe6b4d6787c # clk: renesas: r8a779a0: Add CSI4[0-3] clocks
 - bb033a100bdcf0066baff50aaaec65dd7c5c6b1b # clk: renesas: r8a779a0: Make rcar_r8a779a0_cpg_clk_register() static
 - 9c1be16e50fa0f2f51975cbecc74c464fcc7e625 # clk: renesas: rcar-gen3: Remove stp_ck handling for SDHI
 - eda5a06da337ba70db6f29f808aa0aa3609ef72f # arm64: dts: renesas: r8a779a0: Add VSPD support
 - b30f31d885ddef2577ec4a217707bd4053b3049a # arm64: dts: renesas: r8a779a0: Add FCPVD support
 - 3fa2562303f36d7414aa6250988d3dfc30fc493d # arm64: dts: renesas: falcon-cpu: Add GP LEDs
 - ce922baa5c476832fb4301ac58997170c6963ff2 # arm64: dts: renesas: r8a77961: Add VIN and CSI-2 device nodes
 - 36dd8cbaecfa18b787fb945073d7a259f8928d61 # arm64: dts: renesas: falcon: Move AVB0 to main DTS
 - 1e1aef236609934a62187fd0e56715221b45f4e0 # arm64: dts: renesas: falcon: Move watchdog config to CPU board DTS
 - c6d9228a498091101cd30bc1d288c9b23999d998 # arm64: dts: renesas: falcon: Move console config to CPU board DTS
 - 2019483b18124dd27e7a4be413738dcde13d6877 # arm64: dts: renesas: r8a77961: Add CAN nodes
 - 59535153a8a0df6a24a594789db837101ccf16e3 # arm64: dts: renesas: r8a779a0: Add CMT support
 - 247a15e9a385eb10006d57b0955c90e7769b0ca0 # arm64: dts: renesas: r8a779a0: Add thermal support
 - b075d1bf5fe1bbed93ca57da232e7717759dd5d1 # arm64: dts: renesas: r8a779a0: Add TMU support
 - 2a765af42946e76407b01c578a9a1e14a1066c2a # arm64: dts: renesas: falcon: Add Ethernet sub-board
 - 0d219ac7da0da2343b34b4ff995f327dd1476387 # arm64: dts: renesas: falcon: Add CSI/DSI sub-board
 - 7c50a536204086ebfd8cd5af71eefb803cf2e631 # arm64: dts: renesas: falcon: Add I2C EEPROM nodes
 - 4f8b60cfe9bae98d7b6597d30074db5b6f0115fa # arm64: dts: renesas: Consolidate Salvator-X(S) HDMI0 handling
 - 49c8f5f3668e202d2090f040bb25c03084c5e8ac # arm64: dts: renesas: r8a77961-ulcb: add HDMI Display support
 - c2c3e49c623224638645f9739177eb5cb1318837 # arm64: dts: renesas: Group tuples in pin control properties
 - c754108b076cb20fa8eec7401ac0fff70e5ddfc8 # arm64: dts: renesas: Group tuples in playback and capture properties
 - ead075c342f54684254110094297e8206503724f # arm64: dts: renesas: falcon: Enable MMC
 - f2f28346b4103bdcbc80435bd7d7259fe24d04be # arm64: dts: renesas: r8a779a0: Add MMC node
 - e24a817a585e753396f8d91fbf3bd6fdf0f4df88 # arm64: dts: renesas: r8a779a0: Add HSCIF support
 - dffd5ae04630c55d67aeb2543f7a110b25b34fcd # arm64: dts: renesas: falcon: Complete SCIF0 nodes
 - 806bef231cf1c321aeca595fcfdd88b64271d672 # arm64: dts: renesas: r8a779a0: Add & update SCIF nodes
 - 989593eb7dfbe190e7ce74c1f4e6de2bc070ea5f # arm64: dts: renesas: falcon: Add Ethernet-AVB0 support
 - 0168460c0f56acf15dedc6f93bf3b50904f70d17 # arm64: dts: renesas: r8a779a0: Add Ethernet-AVB support
 - d49dd76822d714da01d8cd68c09004ba8da82018 # arm64: dts: renesas: falcon: Add I2C0,1,6 support
 - 3273b954d718c7b5ddcca993791e02054821a570 # arm64: dts: renesas: r8a779a0: Add I2C nodes
 - 4d2e21a57db1a1e6dd73e97a56a6735911bf636f # arm64: dts: renesas: Disable SD functions for plain eMMC
 - e7efe2fad87ed540f6bbd7a5adcecfaccdd8245b # arm64: dts: renesas: r8a779a0: Add MSIOF device nodes
 - 40de454e531209bb73cf02afe19f5eb993089d41 # arm64: dts: renesas: r8a779a0: Add SYS-DMAC nodes
 - ff36113414963ec6c518f92f80ae4ba02e002f73 # arm64: dts: renesas: r8a779a0: Add GPIO nodes
 - 04a9bd6ae9a59a4cfcfbc478aceeff0353e6bbeb # arm64: dts: renesas: r8a779a0: Add pinctrl device node
 - 1d91d5aa07cf295d569dec30c22aba4557b65b24 # arm64: dts: renesas: Align GPIO hog names with dtschema
 - 979605d91b070ed36457a28cd1d4e1346aaf4d14 # arm64: dts: renesas: falcon: Enable watchdog timer
 - 613893fbc93b5fe80841706b7b7d1380d91f7fa1 # arm64: dts: renesas: r8a779a0: Add RWDT node
 - 1889bd620ffbdaa5ae2003749566be645106046a # arm64: dts: renesas: rcar-gen3: Add missing TMU nodes
 - 853eff16af95590fa6da99d9536db2d5d2631657 # arm64: dts: renesas: rcar-gen3: Add missing CMT nodes
 - 5a4dcedd0873b9ced67ed07049161007c7935592 # arm64: dts: renesas: r8a77951: Add PCIe EP nodes
 - 1e60d00d910d8c52df632978a977aca786550bd9 # arm64: dts: renesas: r8a77961: ulcb-kf: Initial device tree
 - b9366c7195bc4c1a7c0614dfd49b711c4daab15d # arm64: dts: renesas: r8a77961: Add CAN{0,1} placeholder nodes
 - 8ad6611a36f5caa43257bbb93a4fb05a8e94b072 # arm64: dts: renesas: rcar-gen3: Convert EtherAVB to explicit delay handling
 - 4c2e21e178c4ea5f133a0f33cb3c3c02a8688991 # arm64: dts: renesas: r8a77965: Add DRIF support
 - ca825c1f1fe5044a519995d91868ac265d7b5008 # arm64: dts: renesas: r8a77961: Add MSIOF nodes
 - d16725881716e49692ab23dc8699797aaf7c99f9 # media: rcar-csi2: Enable support for r8a77961
 - d283194aaa4e8ffe8142384541e2575d16d10a23 # media: rcar-vin: Enable support for r8a77961
 - 629f7c56f3b081386a64325f99b04a696d1d0e86 # dt-bindings: media: renesas,csi2: Add r8a77961 support
 - ce591de923baf6a77dc477d6c1abd2e5fdbb8794 # dt-bindings: media: renesas,vin: Add r8a77961 support
 - ac0581bd296273d3ffb3a0b1e39e1c3bd1e03d09 # media: rcar-vin: do not allow changing scaling and composing while streaming
 - b5a29d9d7078536ae67f60d6feb655e9084aaaec # ASoC: soc-component: Add snd_soc_pcm_component_ack
 - 193962c3f3a22f64ec83a3d76c94cb9308d0677c # regulator: bd9571mwv: Add BD9574MWF support
 - 0802966d523cf39d631adc731f2744e601cf8544 # regulator: bd9571mwv: rid of using struct bd9571mwv
 - 33a6a0769c9ce762eb9b6b759f6175e390ecc451 # mfd: rohm-generic: Add BD9571 and BD9574
 - 1e0933d17e2013530ef366effc8cfc00ffc30fa0 # dt-bindings: mfd: bd9571mwv: Document BD9574MWF
 - 02de6ed3769769a26bd61ca8d43139b555fbb65f # gpio: bd9571mwv: Add BD9574MWF support
 - 7354d4fde0633f4e9ce2716dd47db237510f2552 # gpio: bd9571mwv: rid of using struct bd9571mwv
 - 2eb3f542f44616dfc601b230c6cab390955ae266 # gpio: bd9571mwv: Use the SPDX license identifier
 - beb3c2a4b0c6a0a53ae90ba89333d69bafd37b52 # mfd: bd9571mwv: Add support for BD9574MWF
 - 3215775b717271612275ee00efe91107df912e3d # mfd: bd9571mwv: Make the driver more generic
 - 5a9f1452896733f0e3f9ce0d54512cf5e48e4f87 # mfd: bd9571mwv: Use devm_regmap_add_irq_chip()
 - 0529f392eee7f1a6ea1f63733870789d5357710e # mfd: bd9571mwv: Use the SPDX license identifier
 - d1956cc496c0e83b790708991c86d979a6035a29 # arm64: dts: renesas: r8a77951: Add RPC device node
 - 4efb8cecf96b8475074517f88709b133d584890d # arm64: dts: renesas: r8a7796{0,1}: Add RPC device node
 - ac025479ee060e342fda474d9184ae87162bbd00 # arm64: dts: renesas: r8a77965: Add RPC device node
 - fc7ce4d2aba3a774a74018e0c0ad0beb2a9e82de # arm64: dts: renesas: ulcb: Add RPC HyperFlash device node
 - ba1b29baa8041b7b90e2c38b0e5c99e02893524a # arm64: dts: renesas: salvator-common: Add RPC HyperFlash device node
 - a448b03f384e4aa244f4efd12325fa37c4d4cdc8 # arm64: dts: renesas: r8a77995: add R-Car Sound support
 - e5d7727d7bb0516c25334e1129675b2b58db4614 # arm64: dts: renesas: r8a77995: draak: Add R-Car Sound support
 - f111e5db0dc60b27264bc3560e8efe90ea8010a0 # serial: sh-sci: Fix transfer sequence of unsupport DMA transfer
 - e42103060173cc1257a6a426cc97e4979bf56af2 # clk: renesas: r8a779{5, 6, 65}: Add mlp clock
 - 9a5764ba3bc66579e36936b93753256aae1b7932 # pinctrl: renesas:r8a779{50, 51, 6, 65}: add mlb pinmux
 - 4d1ebe251b51f549706fa9378dc983c509e2b798 # arm64: dts: renesas: eagle: Add x1 clock (torvalds: e9550a536e3edd23b88926a6fb27fa200b56dfa9 # arm64: dts: renesas: eagle: Add x1 clock)
 - c59c751f1d3766082d979d234dd9597145ec2495 # arm64: defconfig: enable R8A779A0 SoC (torvalds: bc518da26e3a98d8eaa713b7e51a326eceb3b3fd # arm64: defconfig: Enable R8A779A0 SoC)
 - 015070c29cdc0e62c9c24ac67ad08cc87110d327 # arm64: dts: renesas: r8a77970-v3msk: Fix memory size (torvalds: a422ec20caef6a50cf3c1efa93538888ebd576a6 # arm64: dts: renesas: v3msk: Fix memory size)
 - 2f6c0efd55417ea79440be1b03b31c4e226f0b12 # dt-bindings: net: renesas,etheravb: Add support for r8a779a0 SoC (torvalds: ca649ccae45d64b3b8e22a9fee9af7d796494e42 # dt-bindings: net: renesas,etheravb: Add r8a779a0 support)
 - 8add8b11368bd35a56f3f8a20381205fa6170e26 # dt-bindings: pwm: tpu: Add R-Car V3U device tree bindings (torvalds: 8aea22fb2d57eb3bcd77631c91f69b6bbdc90821 # dt-bindings: pwm: tpu: Add R-Car V3U device tree bindings)
 - 88c4abf2bfbb5840c6d0182dab7adca84ec9aac3 # dt-bindings: watchdog: renesas-wdt: Add support for the R8A779A0 WDT (torvalds: 1ee5981da617190c41f7a019542ed4a85041ddbd # dt-bindings: watchdog: renesas,wdt: add r8a779a0 (V3U) support)
 - d201eeb5ab6c80c229bad5231d2ac55fcbae8997 # serial: sh-sci: Fix off-by-one error in FIFO threshold register setting (torvalds: 2ea2e019c190ee3973ef7bcaf829d8762e56e635 # serial: sh-sci: Fix off-by-one error in FIFO threshold register setting)
 - e266422912688819562704dfa00b5c5128cdbc45 # serial: sh-sci: remove obsolete latency workaround (torvalds: f9f54983005cdd1060b85b16933677442139d88d # serial: sh-sci: remove obsolete latency workaround)
 - e017e27461b093d245ed18090e779458d1e783b4 # thermal: rcar_gen3_thermal: Fix coefficient calculations (torvalds: 8946187ab57ffd02088e50256c73dd31f49db06d # thermal/drivers/rcar_gen3_thermal: Fix coefficient calculations)
 - 54a818f1742200cddbb427a8de9a26652cc10254 # arm64: dts: renesas: falcon: Enable watchdog timer (torvalds: d207dc500bbcf8c6e1cbad375b08904f984f9602 # arm64: dts: renesas: falcon: Enable watchdog timer)
 - e1ea7474dcd8d29c2eb51aa7710e3635a2622348 # arm64: dts: renesas: r8a77990: Add I2C-DVFS device node (torvalds: 44ea652a92d209045da9183981b55fd0c2c01971 # arm64: dts: renesas: r8a77990: Add I2C-DVFS device node)
 - f1cee115e41a3aa48bd23eed945ccdc907997881 # arm64: dts: renesas: r8a779a0: Add IPMMU nodes (torvalds: eb6750431e66bf139283ef7e56c1f41dc30f15fc # arm64: dts: renesas: r8a779a0: Add IPMMU nodes)
 - 375c499897339f52f4649ca88bd1d79baead8436 # drm: rcar-du: Set the DMA coherent mask for the DU device (torvalds: 780d4223f662167fa0a58a98b09c20e3e173c0cc # drm: rcar-du: Set the DMA coherent mask for the DU device)
 - 8102cfc1f746926919073ebb55d3e3e4b2f94a3a # media: rcar-vin: Mask VNCSI_IFMD register (torvalds: fb25ca37317200fa97ea6b8952e07958f06da7a6 # media: rcar-vin: Mask VNCSI_IFMD register)
 - f836ef16e5a9f8bd7757d50eec36cdb5f563d925 # thermal/drivers/rcar_gen3_thermal: Add support for hardware trip points (torvalds: 47cf09e0f4fc51200ecea15387bec3584562f55d # thermal/drivers/rcar_gen3_thermal: Add support for hardware trip points)
 - 6b4476dceb10d172c798d2a80c156fae1abe7b6a # thermal/drivers/rcar_gen3_thermal: Store TSC id as unsigned int (torvalds: d3a2328e741bf6e9e6bda750e0a63832fa365a74 # thermal/drivers/rcar_gen3_thermal: Store TSC id as unsigned int)
 - efa2f903d1def3f7830d07902052260a4ac0b9c0 # thermal: rcar_gen3_thermal: Do not use interrupts for normal operation (torvalds: 1b57b9597c779f0a20c5837abec31f600240496b # thermal: rcar_gen3_thermal: Do not use interrupts for normal operation)
 - 6f8cd4fc28c9c480fbbeaa61dd740ff19254581f # arm64: dts: renesas: v3hsk: Add GEther PHY GPIO reset pin support (torvalds: 732e8ee0351c59ded4d88106437a7ad1cff4cb83 # arm64: dts: renesas: rcar-gen3: Add missing Ethernet PHY resets)
 - 90cb26a4424e4abdd42cd2eebc318a64433533e6 # arm64: dts: renesas: r8a779a0: Enable IPMMU support for eMMC by default on R-Car V3U (torvalds: eb6750431e66bf139283ef7e56c1f41dc30f15fc # arm64: dts: renesas: r8a779a0: Add IPMMU nodes, torvalds: 52e3ebdc07e2f39e04152422ef4f8cb855d75ab0 # arm64: dts: renesas: r8a779a0: Add iommus into sdhi node)
 - f6268afedd7574ca862b760ac6a924f4485f4148 # arm64: dts: renesas: r8a77990: Enable IPMMU-DS1 and IPMMU-MM (torvalds: 55697cbb44e4f7ea8369f19fa95115dbf066708c # arm64: dts: renesas: r8a779{65,80,90}: Add IPMMU devices nodes)
 - 9ac181a4a81f7657d3195c7575635a65aa5a4b56 # arm64: dts: renesas: r8a77965: Enable IPMMU-DS1 and IPMMU-MM (torvalds: 55697cbb44e4f7ea8369f19fa95115dbf066708c # arm64: dts: renesas: r8a779{65,80,90}: Add IPMMU devices nodes)
 - 4ab73dd4c0afde038c15c7743a9f0326c281b6c9 # thermal: rcar_gen3_thermal: Correct the order of checking THSCP (torvalds: c3131bd5586d3e8b67dc69516e1734a7a03e19d7 # thermal: rcar_gen3_thermal: Read calibration from hardware)
 - 96cddacd9fc46a8228dce5120a7220ba9df830e2 # thermal: rcar_gen3_thermal: Use FUSE values if they are available (torvalds: c3131bd5586d3e8b67dc69516e1734a7a03e19d7 # thermal: rcar_gen3_thermal: Read calibration from hardware)
 - 8b7ae276d3c36947359596408a240f1d7d05b6b1 # rcar-vin: rcar-csi2: Don't bail out from probe on no ep (Probing of half the CSI-2 bus makes no sens)
 - 47067db73db953fddbc032801c51526fbc716cbc # media: rcar-vin: Disable media-ctl on R8A77995 (All Gen3 platforms shall use MC, even D3 that only has a single port. There is no telling what connected to that port and MC maybe needed.  In a perfect world Gen2 shall move to only use MC.)
 - 577d25b5ff50328d29f3edb06ee650c5654a91c3 # PCI: pcie-rcar: Add bus notifier so we can limit the dma (Workaround in driver rejected upstream. Needs to be fixed in core code. Big task!)
 - 267368b0ad43375297d5b9a957fbf49789790bde # arm64: boot: dts: renesas: ulcb-kf: Enable extra sound cards
 - 82ead2c6ed3efd8e6a2f634dbc389b8fb94eecd2 # arm64: boot: dts: renesas: ulcb-kf: Set radio and BT sound masters
 - 638b432f9d94c68c9bda4857df8af981a55fd2a1 # arm64: boot: dts: renesas: ulcb-kf: pcm3168a add TDM mode
 - 35e80b99cccbffbeb9b8e67e6a78c4412c804594 # arm64: configs: Enable DEVFREQ configuration (This is a local patch file for developers. So we don't need to upport.)
 - 7bb24e9bc209fe03c0c9ebd68e1c08d078a98fde # arm64: configs: Enable SN65DSI86 configuration (torvalds: 4ac0379f9cb1b7c7a1b184cd28f4787d010b7253 # arm64: defconfig: Enable SN65DSI86 display bridge)
 - 24a6076fd8400c98a249e969f07b4e6c75e2549c # arm64: configs: Enable usb-dmac driver (Proposing 'N'  Modular as per upstream policy)
 - 7cbfa2806bc409766a308c52133fb31d9d7295df # arm64: defconfig: Add USB3.0 phy driver (Proposing 'N'  Modular as per upstream policy)
 - 1e2eb5b024db453f730bc405fc2d1ff00182278a # arm64: defconfig: Change R-Car PWM to built-in (Proposing 'N'  MultiMedia devices should be modular in arm64 defconfig)
 - ca9ab2cb8edc44dcab32b6859d590d6d48343273 # arm64: defconfig: Enable CONFIG_USB_RENESAS_USBHS by default (Proposing 'N'  Modular as per upstream policy)
 - e4c7d3217c408766de24549f46d419750a3415af # arm64: defconfig: Enable Display driver related configuration (Proposing 'N'  Graphics should be "m" in arm64 defconfig)
 - c227b0049f673380ab02aeaa871eed0a1722c8f2 # arm64: defconfig: Enable UIO support (Proposing 'N': UIO and OSAL are not intended for upstream))
 - 1baa20644bd6dca721b10af042ba0a650d061c2d # arm64: defconfig: Enable VIN driver related configuraiton (Proposing 'N' MultiMedia devices should be modular in arm64 defconfig)
 - c84e327fee8b0819dd2d4f7789613273aba724f3 # arm64: defconfig: Enable cpufreq configs for rcar (Proposing 'N'  Modular as per upstream policy, CONFIG_CPU_FREQ_STAT_DETAILS was removed in v4.11)
 - b8d351f50ce24d86144f5bb5f62e5f661d1d4907 # arm64: defconfig: Enable rcar sound support
 - ceff388b95151e5c92c563b0926739c41e4f15e0 # arm64: dts: r8a77970, r8a77980: Convert IPMMU to UIO (Proposing 'N': UIO and OSAL are not intended for upstream))
 - 888a501b71a5e6fd454b4701dc2b3aae5ab5bf43 # arm64: dts: r8a77970, r8a77980: Enable TMU and CMT (there were issues enabling multiple timers in board files by default)
 - 54696caf6d885ee4d91847e69a287e6f71b15eab # arm64: dts: r8a77970, r8a77980: Rename IMR UIO devices (Proposing 'N': UIO and OSAL are not intended for upstream))
 - 6ec780271fe6dfeb62e57978e198f5f5ec5a3b7e # arm64: dts: r8a77980-condor: Add reserved memory regions (This is a local patch file for MMP. So we don't need to upport.)
 - 1500cff2ac3e1e4c0483b508d7a1b142481f4923 # arm64: dts: r8a77980: Update name and reg size of IMP nodes (Proposing 'N': UIO and OSAL are not intended for upstream))
 - e1e8014d61008fedfa9a0faddd9a12bd8c447200 # arm64: dts: r8a779[78]0: Add WWDT generic UIO nodes (Proposing 'N': UIO and OSAL are not intended for upstream))
 - b6c865ec0b36af68394224cd67a7a19188a8eae3 # arm64: dts: r8a779a0-falcon: Add TPU support (won't be upported because there are no users on the boards)
 - 83d836d0af1b2b42610ef4850c62935e0966a931 # arm64: dts: renesas: Add MMNGR nodes for V3X boards
 - 1b9a2610cd41618a5129b733ee6c788d9ac54ad2 # arm64: dts: renesas: Add missed ipmmu-id tags (Proposing 'N': UIO and OSAL are not intended for upstream))
 - 41861830a218a28ebb65c78f040a464695a22a8e # arm64: dts: renesas: Add resets property to IMP devices (Proposing 'N': UIO and OSAL are not intended for upstream))
 - aa7e0341c29eac06e86be1265da29ab45903c589 # arm64: dts: renesas: Comment out status ok in rpc node (not needed. we upport the meanwhile available fix instead)
 - 48b06e1f3311ae2cb525f8eaf77f531215d07313 # arm64: dts: renesas: Set FBC UIO memory region to minimal possible (Proposing 'N': UIO and OSAL are not intended for upstream))
 - 7ee35bdada050195db5fbe7835c1419f763c5e19 # arm64: dts: renesas: Set TISP UIO memory region according to datasheet (Proposing 'N': UIO and OSAL are not intended for upstream))
 - d9a86609a18fbef9547d1a59f639806e4faf93c7 # arm64: dts: renesas: UIO device naming per Renesas request (Proposing 'N': UIO and OSAL are not intended for upstream))
 - f5b19f1b55be9589346a471a5d9d9e694928df31 # arm64: dts: renesas: Update IMP LDMA device (Proposing 'N': UIO and OSAL are not intended for upstream))
 - ed4d6566d95e9c61696fa6e53adeb25b71237402 # arm64: dts: renesas: Update IPMMU ID for FBA devices (Proposing 'N': UIO and OSAL are not intended for upstream))
 - fbfdbffe73662881344e2ce724f75c497485f8fa # arm64: dts: renesas: Update IPMMU ID for IMP devices (Proposing 'N': UIO and OSAL are not intended for upstream))
 - 69e62a32432e5159beae7d2354e784a688ea309d # arm64: dts: renesas: Update IPMMU ID for IMR devices (Proposing 'N': UIO and OSAL are not intended for upstream))
 - a974b8a1ed4d4cf5f526f9c123a0e048fb531ed7 # arm64: dts: renesas: Update IPMMU ID for ISP devices (Proposing 'N': UIO and OSAL are not intended for upstream))
 - 7c9b88f11f6302a886c3e68dee38f30ad7c2821f # arm64: dts: renesas: Update IPMMU ID for IVCP1E device (Proposing 'N': UIO and OSAL are not intended for upstream))
 - 956cb42f074ef5da07c19ce97f3363f57d9b1fa2 # arm64: dts: renesas: Update IPMMU ID for VIN devices (Proposing 'N': UIO and OSAL are not intended for upstream))
 - b535704e21d72c76c7c1a493284bceaaf88a237d # arm64: dts: renesas: Update IPMMU ID for VIP devices (Proposing 'N': UIO and OSAL are not intended for upstream))
 - bbd9cd92aea4856d481268341bd604b541ab51d3 # arm64: dts: renesas: Update Power Domain for VSPX devices (Proposing 'N': Video capture is handled by V4L2 upstream, not UIO)
 - b1fc50d44bba6d8579c395c2100dde82e3fd27f1 # arm64: dts: renesas: Updated dts for renesas generic-uio (Proposing 'N': UIO and OSAL are not intended for upstream))
 - 7858552e6c301f2598fee464199b86d5129fbe55 # arm64: dts: renesas: extend 'ipmmu-id' with micro-TLB index (Proposing 'N': UIO and OSAL are not intended for upstream))
 - 509d48b45d5e11d2bf85471c0d654bdcbec75e9d # arm64: dts: renesas: falcon: Add HSCIF0 support (we only keep SCIF enabled in upstream)
 - 2789debd473a9ed34bcc5c9702c7f4897631e37e # arm64: dts: renesas: falcon: Enable CMT (there were issues enabling multiple timers in board files by default)
 - 65c1a8b76e2474827a2150fef7e57f51e0079aab # arm64: dts: renesas: r8a77980: Fix ipmmu_vc0 address (torvalds: 62a17029611af92ff447bfe2677b24438ebcbbad # arm64: dts: renesas: r8a77980: Fix IPMMU-VC0 base address, reverted in the BSP by commit 6ada092d0ab44731 #uio stuff for BSP7)
 - 0a2e950f05e5782cfa9d394dcc645c9af1e33334 # arm64: dts: renesas: r8a77990-ebisu-4d: Add lossy phandle to MMNGR driver node
 - e4176d371c45a0ed00cd9b0c56f5f1c445e1f4d3 # arm64: dts: renesas: r8a77990-ebisu: Add Media Clock Recovery Handler device node (This is a local patch file for MMP. So we don't need to upport.)
 - 29b341ddc7207ec52ea44117051e616344acde42 # arm64: dts: renesas: r8a77990-ebisu: Add vspb and vspi0 for VSP Manager (This is a local patch file for MMP. So we don't need to upport.)
 - 04e0f758a5c84f84bb174c73caa8f64cad9b63a9 # arm64: dts: renesas: r8a77990-ebisu: Enable simultaneous output of VGA and HDMI (Proposing 'N': Incorrect usage of DT bindings, feature already upstream)
 - e8918f98e723a101f98b7831b54ccb011cb10355 # arm64: dts: renesas: r8a77990-es10-ebisu-4d: Add lossy phandle to MMNGR driver node
 - 7b729cf5473880c82bb45e15bfdc19dd031fda56 # arm64: dts: renesas: r8a77990-es10-ebisu: Add Media Clock Recovery Handler device node (This is a local patch file for MMP. So we don't need to upport.)
 - 183aab876955955a4cee266582fa839e1cd8dfd3 # arm64: dts: renesas: r8a77990-es10-ebisu: Add vspb and vspi0 for VSP Manager (This is a local patch file for MMP. So we don't need to upport.)
 - 047bc92947408a84cf2ea0a164bf2e1576b2b393 # arm64: dts: renesas: r8a77990-es10-ebisu: Enable ADSP
 - 6626dc7232bea7be7681db9720ceb875c42340aa # arm64: dts: renesas: r8a77990: Add VGA connector to DU (Proposing 'N': Incorrect usage of DT bindings, feature already upstream)
 - d7ed2f34a22804b8e8d63ac15558c9ffc8b2fc5d # arm64: dts: renesas: r8a779a0-falcon: Add memory nodes (torvalds: 63070d7c2270e8de8abef8f6f20e192bcc1d50de # arm64: dts: renesas: Add Renesas Falcon boards support)
 - e0e1a592b62d81c4d5a0db7085e1687022e0cc4c # arm64: dts: renesas: r8a779a0: Add FBA devices (Proposing 'N': UIO and OSAL are not intended for upstream))
 - 65d62e47c43b7981b8e56732881722b22f24b2c0 # arm64: dts: renesas: r8a779a0: Add FBC devices (Proposing 'N': UIO and OSAL are not intended for upstream))
 - 02dd59344e4be6df665a51d30f152b84f7520346 # arm64: dts: renesas: r8a779a0: Add FCPR devices (Proposing 'N': UIO and OSAL are not intended for upstream))
 - b66bfe465df72540e56f79a076809d4182d9a164 # arm64: dts: renesas: r8a779a0: Add H264 encoder devices (Proposing 'N': UIO and OSAL are not intended for upstream))
 - da72869b25ac4825e15c6a741925c289562c9451 # arm64: dts: renesas: r8a779a0: Add IMP RADSP devices (Proposing 'N': UIO and OSAL are not intended for upstream))
 - 7413772fbd73103078048d0f73458ab013ba13f2 # arm64: dts: renesas: r8a779a0: Add IPMMU info for UIO devices (Proposing 'N': UIO and OSAL are not intended for upstream))
 - 1679b822d749d59ac4e331a5d09c08897d28cfa9 # arm64: dts: renesas: r8a779a0: Add ISP devices for generic-uio (Proposing 'N': UIO and OSAL are not intended for upstream))
 - 0414cb1cf80a0467a14f6c8d9123823aecf073f6 # arm64: dts: renesas: r8a779a0: Add MFIS devices
 - c684c73375884819f1a6190c7c8337e19e67bc19 # arm64: dts: renesas: r8a779a0: Add RFSO devices (Proposing 'N': UIO and OSAL are not intended for upstream))
 - f619413d05a71b88b9e33fd8db531bf8c5805d6b # arm64: dts: renesas: r8a779a0: Add VCPL4 devices (Proposing 'N': UIO and OSAL are not intended for upstream))
 - 7aaf2e08a6d0006f40b9cffa019cc648a72ef39c # arm64: dts: renesas: r8a779a0: Add VIP devices for generic-uio (Proposing 'N': UIO and OSAL are not intended for upstream))
 - 39972de0bba8d402b7d8775bf9a334a032f7b7dc # arm64: dts: renesas: r8a779a0: Add VSPX devices (Proposing 'N': Video capture is handled by V4L2 upstream, not UIO)
 - ca39b83aa7f78774d1dc79f85b2220275021207c # arm64: dts: renesas: r8a779a0: Add WWDT devices (Proposing 'N': UIO and OSAL are not intended for upstream))
 - 926e85fb14b8b5233542c6beaebd6e70f840c43b # arm64: dts: renesas: r8a779a0: Add generic-uio support in DU devices (Proposing 'N': Display is handled by DRM/KMS upstream, not UIO)
 - e52b4cd5b402420c9c04d19c6c0a0ca35839f697 # arm64: dts: renesas: r8a779a0: Add generic-uio support in IPMMU devices (Proposing 'N': UIO and OSAL are not intended for upstream))
 - 3a0cfc5a925de89fb830206aecdb59831d9015a0 # arm64: dts: renesas: r8a779a0: Add generic-uio support in VIN devices (Proposing 'N': UIO and OSAL are not intended for upstream))
 - 8fbb6b1693fc40f78047eb51cf81c665eec15b83 # arm64: dts: renesas: r8a779a0: Add remained IMP devices (Proposing 'N': UIO and OSAL are not intended for upstream))
 - 3fa92bb5be5d0c8e2375544af978ed5defcde4ec # arm64: dts: renesas: r8a779a0: Describe custom name for generic-uio devices (Proposing 'N': UIO and OSAL are not intended for upstream))
 - ef74d433b26d09f5ce39e52f4c321c7f07bf6dfa # arm64: dts: renesas: r8a779a0: Fix clock and software reset of ISP nodes (Proposing 'N': UIO and OSAL are not intended for upstream))
 - b1d14e804814c6a1a4c6a707610fc40e5dc925ed # arm64: dts: renesas: r8a779a0: Separate memory and control regs of IMP SPM devices (Proposing 'N': UIO and OSAL are not intended for upstream))
 - 952b73d8df5c1cf8ab92951b3fc7b95771066c6a # arm64: dts: renesas: r8a779a0: Update IMP device name to follow OSAL naming convention (Proposing 'N': UIO and OSAL are not intended for upstream))
 - 4b6aee40a4df2d9f1b372f3581c960fc92a2c3ba # arm64: dts: renesas: r8a779a0: Update IMR device name to follow OSAL naming convention (Proposing 'N': UIO and OSAL are not intended for upstream))
 - 386fd3ac6618e843fb65847c16b7dcd61bf6470d # arm64: dts: renesas: r8a779a0: Update ISP device name to follow OSAL naming convention (Proposing 'N': UIO and OSAL are not intended for upstream))
 - 2cbf589846b2a939249ff844ce8f95d605c41fbe # arm64: dts: renesas: r8a779a0: Update UIO naming for FBA IMP CVe devices (Proposing 'N': UIO and OSAL are not intended for upstream))
 - b082202c09511e76050da695d3606adc42c87c77 # arm64: dts: renesas: r8a779a0: Update UIO naming of IMP CVe devices (Proposing 'N': UIO and OSAL are not intended for upstream))
 - f955de534b13c6dcb94ed9c522ca8421b89a1144 # arm64: dts: renesas: r8a779a0: Update start address of IMPSPM (Proposing 'N': UIO and OSAL are not intended for upstream))
 - 11a49627c925a04d5f480aa980d287b33bf2d260 # arm64: dts: renesas: salvator-common: Add Media Clock Recovery Handler device node (This is a local patch file for MMP. So we don't need to upport.)
 - 408fd2e3471d36e9a07fe74ebdc01c4fe26e4edd # arm64: dts: renesas: ulcb: Add Media Clock Recovery Handler device node (This is a local patch file for MMP. So we don't need to upport.)
 - 81664b5a8a9d6782faad92200fd8ed96d1691c34 # arm64: dts: renesas: ulcb: Make AK4613 sound device name consistent
 - 3f3493d48e2e3da7793e71298d93adc93a216786 # arm64: dts: salvator-common: Enable IPMMU of SDHI2 (torvalds: 8292f5eb3874844d41d87d1c8e415592d27e8e20 # arm64: dts: renesas: Add iommus to R-Car Gen3 SDHI/MMC nodes)
 - d4192c1bef41b07cdc37ac09c871e6aa39d4720d # clk: renesas: cpg-mssr: Fix Realtime Module Stop Control Register offsets (Proposing 'N': Incorrect definitions are unused, and planned to be removed)
 - 09bf57e7770c09f3cea3ef0459101642a5757820 # clk: renesas: r8a7795: Add ADSP clock
 - 9238fa17f24937d0ab238a9fad52568695a8c832 # clk: renesas: rcar-gen3: Add rounding for Z-clock frequency (This is a local patch file for developers. So we don't need to upport.)
 - b7c6c4d611d8df2bdd9a0a31856456cf4005fca5 # dmaengine: rcar-dmac: Fix array-bounds warning refer chcr_ts[] (Proposing 'N': Rejected by driver author")
 - 34092c716fbf4ca0591e0d3d3b2c3c0b538d4bb5 # drm/bridge: adv7511: Add frequency and vrefresh limitation option (Proposing 'N'  The adv7511 driver isn't where to check board-specific limits. Requesting use case.)
 - 57b58208fde39e28dd374782b28ca23cd537ba87 # drm: bridge/dw-hdmi: Add re-write of vsync pulse width (Proposing 'N': We are not allowed to work on the dw-hdmi driver)
 - 1fc4602787f01c5ead9503bb73b4a42fd204f4ad # drm: bridge/dw-hdmi: Fix offset address of register for R-Car (Proposing 'N': We are not allowed to work on the dw-hdmi driver)
 - 9cf37ad9fc5a5ca8949f32d95465cbeca9e92d5f # drm: bridge/dw-hdmi: Fix reserved bits and unused registers for R-Car (Proposing 'N': We are not allowed to work on the dw-hdmi driver)
 - bf1b6ab4a7d8f5af2ed07f3e4213cd620a92d685 # drm: rcar-du: Add HDMI control clock when S2RAM (Proposing 'N'  While PM support is needed in dw-hdmi, it should be implemented in a standard way)
 - 29b84ccf0800717bd11cdcdd02bb640fc02db96b # drm: rcar-du: Add dev_type for dw-hdmi driver (Proposing 'N': We are not allowed to work on the dw-hdmi driver)
 - b0183d9d526859d87de3d3dfdfe134121bfdc5cb # drm: rcar-du: Add overlay layer size check (Proposing 'N'  No needed since 401712e035c699d569dbd37024f4b21dc76cc870)
 - 16574293476e1650579a96102ee9bedaf366bbd0 # drm: rcar-du: Fix PHY configure registers (Proposing 'N'  We are not allowed to upstream dw-hdmi code)
 - 0912ef6f942c2d9f4bd4fb4dcc8d54a3ce769746 # dt-bindings: ipmmu: Add IPMMU info for UIO devices (Proposing 'N': UIO and OSAL are not intended for upstream))
 - de9343ed804db1705a4704943f20bf50e4ecc8ce # dt-bindings: serial: sh-sci: Document r8a779a0 bindings (torvalds: bc0468ee4922b04e529da4734bfcd3f19152db8e # dt-bindings: serial: renesas,scif: Document r8a779a0 bindings, torvalds: f754ed71b79cca5b07e76aaf28ce3c8776ab1f7f # dt-bindings: serial: renesas,hscif: Add r8a779a0 support)
 - 4baf22370a832743811157948aa878427806b5e7 # gpio: gpio-rcar: Add support for R-Car V3U (torvalds: 93ac0b0c68c0cff8e49d2a7c08525824dbb8642e # gpio: rcar: Add R-Car V3U (R8A779A0) support)
 - e4c707a78786cf0c7dba59ceba04bf20bf878853 # gpio: rcar: Add DT binding for R-Car V3U (torvalds: 2a84708c2f2f9d134abd21d1f2fe6ce5a87dffaa # dt-bindings: gpio: rcar: Add r8a779a0 support)
 - 3422d31317004fec9a0e4583c7a24fca13d87b1f # i2c: rcar: Support the suspend/resume (torvalds: 18569fa89a4db9ed6b5181624788a1574a9b6ed7 # i2c: rcar: add suspend/resume support)
 - 8d0b547940642f2df2556a5adfbac078aaf56fde # iommu/ipmmu-vmsa: Add override support for the actual number of MMU contexts (Proposing 'N': This is related to MMP code)
 - 49e5bbe2c8d889cb947f7d7e62440f94ca8a9822 # kbuild: add support for building dtbo targets (torvalds: ce88c9c79455fb69c6843b4bd30196fccb978a57 # kbuild: Add support to build overlays (%.dtbo))
 - 10ad8fe533d6468c09c74345f4a4998e1da1e8ac # media: i2c: adv7180: Add std update when getting format (Proposing 'N'  Userspace is responsible for setting the correct format based on VIDIOC_QUERYSTD)
 - 6fd9af5610b6acca3581d3a7f2e9f2eef42fec92 # media: i2c: adv748x: Fix get_format function (Proposing 'N'  Userspace is responsible for setting the correct format based on VIDIOC_QUERYSTD or VIDIOC_QUERY_DV_TIMINGS)
 - 03417f60076e886f6c9f23eacfdb1c79fb5fc91f # media: i2c: adv748x: Fix video standard selection register setting (Proposing 'N'  Patch is a no-op. The bit is not changed due to use of clrset)
 - 2593239e44e028e530af072582e5e60289c5a811 # media: i2c: adv748x: Set default EDID value (Proposing 'N'  Upstream doesn't accept default EDID in drivers)
 - 43d76c7078930b3f032fa495814425d31dff540d # media: i2c: adv7604: Add default EDID information (Proposing 'N'  Upstream doesn't accept default EDID in drivers)
 - f3f237d1d5caa20069619e5c3d25ebcce5b83011 # media: i2c: adv7604: Fix set_fmt function (Proposing 'N'  Userspace is responsible for setting the correct format based on VIDIOC_QUERYSTD)
 - 6bfdf4594ff59a196d67304c6e6505d847784ebf # mmc: renesas_sdhi: Add PIO mode support (really needed? looks like a working around DMA problems of very early Gen3)
 - 1a27d8cebb50ec910dece8d05f2f8458a80bf6f3 # mmc: renesas_sdhi: fix selection of manual correction (Why exactly can't we use the version register?)
 - 4cfd13120fd1335a4ad46a79f204cdf9665bb1b2 # phy: rcar-gen3-usb2: Add a compatible string for r8a77990 (Proposing 'N' Driver matches against family-specific compatible value, which has always been present in upstream DTS)
 - 9e5b26f49b2025c875c73b6994d0fbb534f1ebd9 # phy: rcar-gen3-usb2: Add a compatible string for r8a77995 (Proposing 'N' Driver matches against family-specific compatible value, which has always been present in upstream DTS)
 - 5518a263bbac2367a5ae22c7d78f0cbae8080153 # pwm: tpu: Add a compatible string for r8a779a0 (not needed. We have the generic fallback)
 - 9108cd971def8a8144b460a27acca4a58ea37d94 # ravb: Add ravb_multi_interrupt to IRQF_SHARED (Proposing 'N'. Not appropriate for upstream.  Required to support Renesas MCH (Media Clock Recovery Handler) driver which is not upstream)
 - f1590dafde948f4bccb2fd8a7a3a417834fdebb1 # ravb: Add register define for Gen3 (There is some value in documenting unused bits and registers, however, the value of this patch is not sufficient for upstream as it only documents the mnenonic of registers and bits, and that they are for Gen3. There is no information about the purpose of the bits and registers.)
 - c1ea9cd6b23b9dffbad100c06c7112141b20308d # ravb: Avoid unsupported internal delay mode for R-Car E3/D3 (torvalds: 8703ba77ec555b08c538beb728a4df1b72e0213e # arm64: dts: renesas: ebisu, draak: Limit EtherAVB to 100Mbps)
 - 6d1b7ccbb1b53d364e50e4bce8b58256f02a68c7 # ravb: Fix ravb_ptp_interrupt clear interrupt all status (Proposing 'N'. Rejected by upstream, current approach of clearing all bits is regarded as safer)
 - 54c35458feb3e9988ba99cace515bb7738572457 # ravb: Fix register define for Gen3 (There is some value in documenting unused bits and registers, however, the value of this patch is not sufficient for upstream as it only documents the mnenonic of registers and bits, and that they are for Gen3. There is no information about the purpose of the bits and registers.)
 - bc263dc878a3974d1e77be675478fbfbaee69aa3 # serial: sh-sci: Use pm_runtime_get/put when resume (Proposing 'N'. According to our research tty-core activates clocks. Testcase needed.)
 - 7358fe65fe45d494e5ed37cbab9e67c90e4c206e # serial: sh-sci: Use pm_runtime_get/put when suspend (Proposing 'N'. According to our research tty-core activates clocks. Testcase needed.)
 - 448377563dbbfcd08f412f8e97b9cb669158a7b0 # soc: renesas: Identify R-Car M3-W ES1.2 (Proposing 'N'  Complicates revision matching when using soc_device_match())
 - 8752bd8fed1662a7ed61871f1f5d5c4764e2a58e # soc: renesas: rcar-avs: Add clock enable for AVS (This is just internal code)
 - 11e4687dccf2f4b8a792ea01e7e96088fbba67aa # soc: renesas: rcar-avs: Release node pointer (This is just internal code)
 - 2754e27c54c1ec908e424680f91a26d5add9b7dd # soc: renesas: rcar-avs: Support AVS function (This is just internal code)
 - 48529f6ad4ba9e10f47cf535dfc245c4fd639fb3 # soc: renesas: rcar_ems_ctrl: Enable EMS for CA53 (This is just internal code)
 - 9ee06a0b58a36a8a549e6a193d8f68a58e393d8a # soc: renesas: rcar_ems_ctrl: Enable loadable (This is just internal code)
 - 87b4594245110ba93863cffb55e3edd8d2d87834 # soc: renesas: rcar_ems_ctrl: Exclude A53 out of targeted frequency scaled CPU (This is just internal code)
 - 5b168a4dd8b63c7917389380a53117998d7bb162 # soc: renesas: rcar_ems_ctrl: Fetch targeted shutdown cpu from DT (This is just internal code)
 - 6804f23e7ad105e4fb42aa76b6130edac3efbe6f # soc: renesas: rcar_ems_ctrl: Fix "Using plain integer as NULL pointer" (This is just internal code)
 - bb5604457cb65a01f3787780ade891ccf65e5c04 # soc: renesas: rcar_ems_ctrl: Fix build error with disabling CONFIG_CPU_FREQ (This is just internal code)
 - 88b7a932c7bab1e8bc9eac91861cd392f04d71a0 # soc: renesas: rcar_ems_ctrl: Fix coding error when initializing static var to false (This is just internal code)
 - 727c250c243b0306fc6b171e5714ffe5a467bc02 # soc: renesas: rcar_ems_ctrl: Fix cpu weight for platform with one targeted CPU (This is just internal code)
 - 8bcafdd4654183874c439754ef84ffd7e88876ee # soc: renesas: rcar_ems_ctrl: Move Emergency shutdown to platform driver (This is just internal code)
 - 437968c55ea956ababd873659c92553be609b1f1 # soc: renesas: rcar_ems_ctrl: Update for code cleanup (This is just internal code)
 - e8a6c64cea991adad7b9671b0468421ebe11f942 # spi: sh-msiof: Add MSIOF module clock changing processing for R-Car Gen3 (Proposing 'N'  Should use "assigned-clocks" and "assigned-clock-rates" in board DTS file that actually uses MSIOF)
 - ce7dc1597c3c4e33deabe28f0af5d4918b96e28c # spi: sh-msiof: Add SPI master transmission workaround (workaround patch)
 - b9360ba94c33abfdb0ca3c2a74b38b66dffe6834 # spi: sh-msiof: Add sleep before master transfer for test (Proposing 'N'  local debug code not suitable for upstream)
 - 78349e1afdd83ba2e3f7d30bf33fa8dccb0ae0fb # spi: sh-msiof: Add support for r8a7795 (Proposing 'N'  not needed as the driver matches against "renesas,rcar-gen3-msiof")
 - a3800fe9ad1ef6622fd2d8251e00e5113e12d60a # spi: sh-msiof: Set 2 clock delay for R-Car H3 Ver.3.0 only (No access to H3 ES3.0 for testing)
 - b487ed2516a80c45e33f227efa7ea41f6feafdf2 # tee: Add a macro to provide a register function to a kernel space (optee updates marked as 'Abandoned' in bsp392_tee_driver.yaml)
 - 8ca552d5a9d3e68f0e4205129a66dca97c71d4fa # tee: optee: Change wait to interruptible (optee updates marked as 'Abandoned' in bsp392_tee_driver.yaml)
 - 41f0e4d2e1a5e0675afe79275617c15f9f1d9c00 # tee: optee: Change workqueue to kthread in debug log function (optee updates marked as 'Abandoned' in bsp392_tee_driver.yaml)
 - be03509c3cdb100567a0a60dec70348070729534 # tee: optee: Modify duration of spinlock for list (optee updates marked as 'Abandoned' in bsp392_tee_driver.yaml)
 - c8e02347a488b1a917ed10856f1ee21a4476c243 # tee: optee: add SMC of START_DLOG_OUTPUT to rcar_optee_init_debug_log() () (optee updates marked as 'Abandoned' in bsp392_tee_driver.yaml)
 - f8657e38a41cbab5a3649896c53b8c1c5042c986 # tee: optee: add r-car original function (optee updates marked as 'Abandoned' in bsp392_tee_driver.yaml)
 - e294ce370995032dc006b139100736df5ee2232f # thermal: rcar_gen3_thermal: Enable selection between polling/interrupt mode (Proposing 'N'  This is a workaround code. So Inami-san agreed to change the priority to N.)
 - e5efd7025bf282955a573f308e53c7735755407a # thermal: rcar_gen3_thermal: PIO-INT can be selected for each TSC separately (Proposing 'N'  Should be squashed with 84ae8e4f3f45ebe52499ac2ade32744adc61f355 which is proposed 'N', too.)
 - 481400a9ee7028a898963ea92109124623d7c200 # uio: Add IPMMU info for user-space (Proposing 'N': UIO and OSAL are not intended for upstream))
 - bb000341d7751aee87f999ed7c7936aaa34ef75a # uio: Add PMA IOCTL to compat list (Proposing 'N': UIO and OSAL are not intended for upstream))
 - 759fbed343c22690b973a69632db06a86f4a098e # uio: Add new ioctl for power management (Proposing 'N': UIO and OSAL are not intended for upstream))
 - e502478e5d0d2ce64e9eca406ecd37575a239b3d # uio: Fix SPDX identifier (Proposing 'N': UIO and OSAL are not intended for upstream))
 - fafa069329359e15e71d1d755a8bde2d319661de # uio: uio_pdrv_genirq: renesas: Add clock divisor ioctl support (Proposing 'N': UIO and OSAL are not intended for upstream))
 - beaf0c9a0985d811271753be9f7be877f3fb3c1a # usb: renesas-usbhs: Add compatible string for r8a77965 (Proposing 'N' Driver matches against family-specific compatible value, which has always been present in upstream DTS)
 - 4ff6cc4f39aaaab394a9f92b9e472a5c83b1c652 # v4l: vsp1: Add underrun hung-up workaround (Proposing 'N': H3 ES1.x only)
 - e47c3bbf9fdff8663c532cbdfb37fe2679c12269 # clk: renesas: rcar-gen3: Fix SCCG/Clean peripheral clocks definition (Proposing 'N': the second parent is the clean parent clock)
 - affec55a256085001a5ea4dc263492bbb8530a60 # PCI: rcar: Add a compatible string for r8a77961 (Proposing 'N' Driver matches against family-specific compatible value, which has always been present in upstream DTS)
 - 49a9a630d28e87557964742fcbe376859cb3cf50 # gpio: gpio-rcar: Add compatible string for r8a77961 (Proposing 'N' Driver matches against family-specific compatible value, which has always been present in upstream DTS)
 - 6745303b2bfa494e0a8713b7b81d98ff1288eb2a # i2c: rcar: Add support for r8a77961 (R-Car M3-W+) (Proposing 'N' Driver matches against family-specific compatible value, which has always been present in upstream DTS)
 - da86bb9fb5cd0f9d96337627d77a463b3135003e # phy: rcar-gen3-usb2: Add a compatible string for r8a77961 (Proposing 'N' Driver matches against family-specific compatible value, which has always been present in upstream DTS)
 - 9e2fc2139a65639337c6fd51c17373b14428fdbf # ravb: Add a compatible string for r8a77960/r8a77961 (Proposing 'N' Driver matches against family-specific compatible value, which has always been present in upstream DTS)
 - 84c9eccfa9d7aef3d4dfc9ef5ad70f61504936ff # spi: sh-msiof: Add support for r8a77961 (Proposing 'N' Driver matches against family-specific compatible value, which has always been present in upstream DTS)
 - c8cae912ea1473b3c66f12653b094764b8e2be02 # usb: renesas-usbhs: Add compatible string for r8a77961 (Proposing 'N' Driver matches against family-specific compatible value, which has always been present in upstream DTS)
 - dd2769f99ad18006c468796563308548a85b42f2 # arm64: dts: renesas: Configure the MSIOF parent clock for R-Car Gen3 (Proposing 'N'  Should use "assigned-clocks" and "assigned-clock-rates" in board DTS file that actually uses MSIOF)
 - 778715104029dfdea1dfd5f8d620e91b057c5faf # arm64: dts: renesas: r8a7799a0: Add MSIOF parent clock frequency settings support (Proposing 'N'  Should use "assigned-clocks" and "assigned-clock-rates" in board DTS file that actually uses MSIOF)
 - be2cc95ab62e9f7a9970e50a4f31bda7c4ccc341 # arm64: dts: renesas: r8a779{51, 60, 61, 65, 90}: Add MSIOF parent clock frequency settings support (Proposing 'N'  Should use "assigned-clocks" and "assigned-clock-rates" in board DTS file that actually uses MSIOF)
 - 8ba4541049d6d64a066c367e12a059ce8bcc9196 # spi: sh-msiof: Add MSIOF parent clock (Proposing 'N'  Should use "assigned-clocks" and "assigned-clock-rates" in board DTS file that actually uses MSIOF)
 - e4c24b1376594879732ce3ad6d5838d5122f036a # arm64: dts: renesas: r8a779x: add mlp nodes (torvalds: fb912a1b474e6e3486f1a5057411fdbeec942ea0 # arm64: dts: renesas: rcar-gen3: Add MOST devices)
 - 7becc2e9cfe487fc87e4589913562a361c7b66c2 # arm64: boot: dts: rcar-gen3: Fix MLP IRQ order (upstream never had the wrong order)
 - 0610df8c50bb051691ddb4bf58d8b1592d15dcd2 # arm64: dts: Add uio stuff (Proposing 'N': UIO and OSAL are not intended for upstream))
 - 2ab0c9ea2532710dfc1ecf7eed23c0f7bab3a6c2 # arm64: dts: r8a77951: Add IMR UIO devices (Proposing 'N': UIO and OSAL are not intended for upstream))
 - 55a97a52797437ab5bdb87084fc4703e8ecf3601 # arm64: dts: r8a77965: Add IMR UIO devices (Proposing 'N': UIO and OSAL are not intended for upstream))
 - 4e6fb74ac66f27bbdf538428a3a9123e2a1cf46f # arm64: dts: r8a7796{0,1}: Add IMR UIO devices (Proposing 'N': UIO and OSAL are not intended for upstream))
 - 34dd1b17134ea7ca6457016eb1cfed28175d91e5 # arm64: dts: r8a77990: Add IMR UIO device (Proposing 'N': UIO and OSAL are not intended for upstream))
 - 8c2bbda89caff09d50d0cb8797e6dc569968941a # arm64: dts: r8a77995: Add IMR UIO device (Proposing 'N': UIO and OSAL are not intended for upstream))
 - 2e292a86dc3b9aae9d6efc44c94ce810174ad9f3 # arm64: dts: renesas: r8a779a0: Add IMP nodes (Proposing 'N': UIO and OSAL are not intended for upstream))
 - 39d0d3423a6ad7aef6fc63eea0723dd1eecb8f77 # arm64: dts: renesas: r8a779a0: Add IMR nodes (Proposing 'N': UIO and OSAL are not intended for upstream))
 - bfbb6ed773722c36495d0f59429ecaf12792d797 # arm64: dts: r8a77995: Add optee node (Proposing 'N': optee nodes should be added by firmware)
 - 0a69daf77d15f0970b60c33468115614e6f29c27 # arm64: dts: renesas: Add optee node for Gen3 devices (Proposing 'N': optee nodes should be added by firmware)
 - 9e33f11c830e39eb7889ce1810c51dde76503310 # arm64: dts: r8a779a0-falcon: Add DSI's connector and bridge for Falcon board (torvalds: 5a6bca1ff7a50d2613c3074f00d2768af1aff120 # arm64: dts: renesas: falcon-cpu: Add DSI display output)
 - 083c316afa15be5d59028a90bc5fceeea345057e # arm64: dts: r8a779a0: Add DU and DSI Modules (torvalds: cdda01947bbae8f1b1d19f8aac1f81ae5ce6f37e # arm64: dts: renesas: r8a779a0: Add DU support, torvalds: b2db714bc9a6dcf3636d2c5b1053cf43c0a700d9 # arm64: dts: renesas: r8a779a0: Add DSI encoders)
 - 3ac576d55d34492a47f4efcf87e684b018c5201f # arm64: dts: r8a779a0-falcon: Enable capture module (torvalds: 706f5cb338ff9d7ce68deb1d5a349e5797affa8c # arm64: dts: renesas: falcon-csi-dsi: Add GPIO extenders, torvalds: 283252132cb578cffe761380056caf0aa6a9cf25 # arm64: dts: renesas: falcon-csi-dsi: Add and connect MAX96712)
 - 2a4842c4cf6a58f533538432d32a15fdab5d7395 # arm64: dts: renesas: Support R8A779M{1, 3, 5} board torvalds: 49596032fb9ba34262faf356ffcb1ca58c16b30b # arm64: dts: renesas: Add support for Salvator-XS with R-Car H3e-2G, torvalds: 488cca0a36505969488bac21daed2af202a774cc # arm64: dts: renesas: Add support for H3ULCB with R-Car H3e-2G, torvalds: a04dfa94578b5747719417b561181240d2495ec0 # arm64: dts: renesas: Add support for H3ULCB+Kingfisher with R-Car H3e-2G, torvalds: c532a55c9b4b1740427b9b8173ac756b5acbee1b # arm64: dts: renesas: Add support for Salvator-XS with R-Car M3e-2G, torvalds: 84365481610550aa43ca435d38af7b86c83a21de # arm64: dts: renesas: Add support for M3ULCB with R-Car M3e-2G, torvalds: 1d14ae11ad48aff14ce78471dc0c0eaece326ae0 # arm64: dts: renesas: Add support for M3ULCB+Kingfisher with R-Car M3e-2G, torvalds: 1dedc49209717176761c2356fb4bca3b1b5d4e34 # arm64: dts: renesas: Add support for Salvator-XS with R-Car M3Ne-2G)
 - 4671126b973a2bb02835f8af8935c5fad7c6aa44 # arm64: dts: renesas: r8a779m1: Remove hdmi0 setting for H3e (upstream never had the duplicates)
 - 13c69cdaad59913cf8c632b5c061a12ccf6ea0cd # arm64: dts: renesas: r8a779m{1, 3, 5}: Support 2GHZ for R8A779M{1, 3, 5} (torvalds: 12ee3118871f9ddc75e5551e85c5de7fd5c7f86a # arm64: dts: renesas: rcar-gen3e: Add Cortex-A57 2 GHz opps)
 - 5681328cdaba58b3c887e36ef8764f11628df87b # arm64: dts: renesas: r8a779{50, 51, 60, 61, 65, 90}: Remove clocks properties in gic and irqc node (Proposing 'N': DT describes hardware, not documentation policy)
 - aade015a4e575adbb674984ab9a40955abea4ad8 # clk: renesas: r8a77{95, 96, 965, 990}: Remove INTC-AP and INTC-EX clocks (Proposing 'N': Removing the INTC-EX module clock breaks old DTB, INTC-AP does exist and must not be disabled)
 - ff95c6ce8869f68214cc0032510852444d97e719 # arm64: dts: renesas: r8a779{50,51,60,65,m1}: Move nodes of du and lvds (not applicable)
 - 24c871e931a06c7eaf10f96d6222896ec6303d34 # arm64: dts: renesas: r8a779{51, 60, 61, 65, 90}: Use default clock and reset property for secure public core (Proposing 'N': DT describes hardware, not documentation policy)
 - d328d6af340480402d35daee4e172395099d12b9 # arm64: dts: renesas: ulcb: Enable IPMMU of SDHI2 (not applicable)
 - 6f3c53c98b55453dc5d7e2a24f4a956ca843af96 # clk: renesas: r8a779a0: Support RPC clock for R8A779A0 (torvalds: 27c9d7635d23416f5e791508882f34157dde23f5 # clk: renesas: r8a779a0: Add RPC support)
 - d71920dcb3daeb3dd5c9959dd776c2fea695a794 # clk: renesas: r8a77{95, 96, 965}: Replace PLL3 multiplication setting ((Proposing 'N': DDR2400/2800 not documented in Hardware User's Manual))
 - 7e3a9128443611a270c963d4b72e16e978d88235 # thermal: rcar_gen3_thermal: fix warning: symbol 'rcar_gen3_ths_tj_1' shadows an earlier one (torvalds: 3ae5950db617d1cc3eb4eb55750fa9d138529b49 # thermal/drivers/rcar_gen3_thermal: Do not shadow rcar_gen3_ths_tj_1)
 - 4e5eb2621810cba966b6dd0b79838d63054cc07e # arm64: dts: renesas: falcon: Enabled IPMMU MMC (torvalds: 52e3ebdc07e2f39e04152422ef4f8cb855d75ab0 # "arm64: dts: renesas: r8a779a0: Add iommus into sdhi node")
 - 49b4117cd34c6626b6d93b7dcaaaac0542eb0c97 # arm64: dts: renesas: r8a779a0-falcon: Add I2C support for falcon board (torvalds: 0e6fb83ef258a9abf5b96c51722765e8ccfca9fe # arm64: dts: renesas: falcon: Add I2C0,1,6 support)
 - 06d37ed665f86f92e1ee9883028e77ab3a31a0b6 # arm64: dts: renesas: r8a779a0-falcon: Add SCIF0 support (torvalds: 9e921faa305369e5cbe4fd8f3212a1ad6aa85c79 # arm64: dts: renesas: falcon: Complete SCIF0 nodes)
 - a7d4333359000dcb12aedbfa42e042fd749ee7b3 # arm64: dts: renesas: r8a779a0-falcon: Add missing Ethernet-AVB in Falcon board (Proposing 'N': we never got them to work, not even with the BSP. We have never got confirmation they work on the HW)
 - 928c771151d67467fab9bd628f0985348d0e35db # arm64: dts: renesas: r8a779a0-falcon: Enable TMU (Proposing 'N': there were issues enabling multiple timers in board files by default)
 - 868df1c3a7eac8606b826bdfef268d5bfafeb1c0 # arm64: dts: renesas: r8a77950-ulcb: Disable HS400 of SDHI2 (Proposing 'N': HS400 already disabled in driver because of H3 ES1.*)
 - cc3dfc3d482c1ad2d81706d7c38b8ea4a0d60dd5 # arm64: dts: renesas: r8a77990: ebisu-es10: Add mmc aliases (torvalds: d765a4f302cc046ca23453ba990d21120ceadbbd # arm64: dts: renesas: Add mmc aliases into board dts files)
 - 7adcf7f724ec7020a3ed56953fc637fa212e205e # arm64: dts: renesas: r8a77951: Add spi aliases (Proposing 'N': SPI aliases are deprecated, and there are no spidev nodes in upstream (and there shouldn't be))
 - b376dc46c32517c8268bf826a96f272812ff8ad1 # arm64: dts: r8a77951: Add RT-DMAC nodes (not used by BSP DTs)
 - 45cce20c1792d7e05ac88332ab68e4e724821715 # arm64: dts: r8a77965: Add RT-DMAC nodes (not used by BSP DTs)
 - 9fe3325e2c12232607b20a1f005e4df9331debdf # arm64: dts: r8a7796{0,1}: Add RT-DMAC node (not used by BSP DTs)
 - c6669e2cc4cf2da483deb9c2de7854f6978be9cc # arm64: dts: r8a77980: Add RT-DMAC nodes (not used by BSP DTs)
 - cee903351ed9bd49ac2299812c052020af24c562 # arm64: dts: r8a77990: Add RT-DMAC nodes (not used by BSP DTs)
 - 31a92b847a1fc937ba31f8a4f3eec7cba86e84d4 # arm64: dts: r8a77995: Add RT-DMAC nodes (not used by BSP DTs)
 - 42df72e0baea0b54ed05ff490c8d28e4ebaf9a14 # arm64: dts: renesas: r8a779a0: Add RT-DMAC support (not used by BSP DTs)
 - 09a7f1cc91e15de13ef64b7b5e76d6c574a0bc37 # clk: renesas: r8a77995: Add RT-DMAC clocks (not used by BSP DTs)
 - d96e03675ebb130c6796203bf703678fc971be6b # clk: renesas: r8a77{95, 96, 965, 990, 980}: Add RT-DMAC clocks (not used by BSP DTs)
 - a6f5548031969046c63fc8e5f05f424e39477891 # uio:  Support error notification to upper layer (Proposing 'N': UIO and OSAL are not intended for upstream)
 - 5f7b685705de49f09035b3f268a1a1cc1e01b6e7 # uio: Fix the logic of setting reset to UIO devices (Proposing 'N': UIO and OSAL are not intended for upstream)
 - d427ad84811d890cad98642bc7ba29358cbe8a43 # uio: Inform UIO no-reset-line to users (Proposing 'N': UIO and OSAL are not intended for upstream)
 - 337d944a0eda17bcbf48c532e534e22910484e26 # uio: Initialize reset struct of each UIO device (Proposing 'N': UIO and OSAL are not intended for upstream)
 - f17cdc187e5d13099750b7c9d8358724e127ae8d # uio: Switch to clk_hw_get_flags() (Proposing 'N': UIO and OSAL are not intended for upstream)
 - 83a93cd3ab7c718f89bfa74fbe33b4b092dac94e # uio: Use EOPNOTSUPP, not ENOTSUPP (Proposing 'N': UIO and OSAL are not intended for upstream)
 - 7873ace2658308ae891a97b0695d245b304e4daa # clk: renesas: r8a779a0: Support missing module clocks for R8A779A0 (Proposing 'N': we only upport clocks of devices used and tested)
 - cb83f9e1d8ff6a729c9748318035eef38f82cbc4 # arm64: dts: r8a779a0: Delete ipmmu in mmc node (used only for BSP backward compatibility)
 - 4195aebe925b9987a380b4b689eb653a6df97d14 # arm64: dts: renesas: r8a77951: Detach IPMMU-DS0 from Ethernet-AVB (used only for BSP backward compatibility)
 - a9ead9613e7dcce3a034661662909b84c9b683ae # arm64: dts: renesas: r8a77951: Detach IPMMU-HC from SATA (used only for BSP backward compatibility)
 - 965b31f8e6e63de98ac6b0889e8393a2922f0db8 # arm64: dts: renesas: r8a77960: Detach IPMMU-DS0 from Ethernet-AVB (used only for BSP backward compatibility)
 - 24ad3528217c7756d9836a8916cd4554e831b7f3 # arm64: dts: renesas: r8a77965: Change default of all IPMMU devices to disable (used only for BSP backward compatibility)
 - 1ee1b3c007ba45aed9a5f95c1e05fe204bc2502e # arm64: dts: renesas: r8a7796{0,1}: Detach IPMMU-VI0 from FCPF (used only for BSP backward compatibility)
 - 7fe579bf274fb87c6b46ad8b77388e930b4d42c0 # arm64: dts: renesas: r8a7796{0,1}: Disable IPMMU devices (used only for BSP backward compatibility)
 - 9fe7b60b29ff530a5dfa185518dd2c659fa5fb3b # arm64: dts: renesas: r8a77990: Change default of all IPMMU devices to disable (used only for BSP backward compatibility)
 - 2bf7439d38373ac9a74abe170230ac41553eed7d # arm64: dts: renesas: r8a77990: Detach IPMMU-VI0/1 from FCPVD (used only for BSP backward compatibility)
 - b305c078b882095946ad847b8d4b59be2df87aff # arm64: dts: renesas: r8a77995: Change default of all IPMMU devices to disable (used only for BSP backward compatibility)
 - edeeddb8850c25799456d894d0d40db85781471c # arm64: dts: renesas: r8a77995: Detach IPMMU-DS0 from Ethernet-AVB (used only for BSP backward compatibility)
 - 1873f5a2e595d4cb1b4bf0390a02f044b5068bf5 # arm64: dts: renesas: r8a77995: Detach IPMMU-DS1 from SDHI (used only for BSP backward compatibility)
 - 38f7ba88d9c8ee8172140822d5023f349bc1a04c # arm64: dts: renesas: r8a77995: Detach IPMMU-MP from AUDIO-DMAC0 (used only for BSP backward compatibility)
 - a197e942cec5cf8e49095d7890208b4e9820df04 # arm64: dts: renesas: r8a77995: Detach IPMMU-VI0 from FCPVD (used only for BSP backward compatibility)
 - 4c2f059cb929df113272a8468747239f9a87c55b # arm64: dts: renesas: r8a779{50, 51}: Detach IPMMU-VI from FCDVD (used only for BSP backward compatibility)
 - 10fced7fd7162b80d59206a775b49c69530bbed8 # arm64: dts: renesas: r8a779{50, 51}: Disable IPMMU devices (used only for BSP backward compatibility)
 - 3010ed8a651c0b79c8791e7aa48edd03e21cae34 # arm64: dts: renesas: r8a779{51, 60, 61, 90}: Detach IPMMU-MP from Audio-DMAC (used only for BSP backward compatibility)
 - 537f163b04f881901a5b695918b3a2bd1dfa9aa2 # arm64: dts: renesas: r8a779{51, 60, 65, 90, 95}: Detach IPMMU-DS from SYS-DMAC (used only for BSP backward compatibility)
 - 422ff16ae6ebdbd2f6f563d7270ecc7039ff84b6 # arm64: dts: renesas: r8a779{51, 60, 65, 90}: Detach IPMMU-DS1 from SDHI (used only for BSP backward compatibility)
 - 68e1c57804f71681c572e49432b7c358a9fda7a2 # arm64: dts: renesas: r8a779{65, 90}: Detach IPMMU-DS0 from Ethernet-AVB (used only for BSP backward compatibility)
 - 11624f5aee4d6abc48483db05844973b888e05ea # arm64: dts: renesas: r8a77995-draak: Enable IPMMU of SDHI2 (used only for BSP backward compatibility)
 - 2cd80d58965382a19ce3ffddecf4a54b9d908004 # arm64: dts: renesas: r8a77990-ebisu{,-es10}: Enable IPMMU of SDHI3 (used only for BSP backward compatibility)
 - 04a34ddc6a080bcd0242b59d827123f844e644e1 # PCI: pcie-rcar: Add the initialization of PCIe link in resume_noirq (torvalds: be20bbcb0a8cb5597cc62b3e28d275919f3431df # PCI: rcar: Add the initialization of PCIe link in resume_noirq())
 - 3b5cf4b7c35d9298bf7b04a6fea416cdfc514c53 # arm64: dts: renesas: r8a77961: Add LVDS node support (torvalds: d45db61c2e569e0e95925a41bdb926913487f21a # arm64: dts: renesas: r8a77961: Add lvds0 device node)
 - fe841fa406010e8273e724f6ab88d5e1149937de # arm64: dts: renesas: r8a77961: Fix intc_ex node (torvalds: 479c700c6df222056d246e9fc4eeecd8e4ed1744 # arm64: dts: renesas: r8a77961: Add INTC-EX device node)
 - 80124b2c320b229fbdd929896646927de4bfb5b2 # drm: rcar-du: Add enable/disable dot clock to DU in R8A779A0 (Proposing 'N': The DU has no other outputs than DSI, the DSI encoder will thus always turn its clock on when enabled)
 - 6317f8b3b151487036b2742408525903045011f4 # drm: rcar-du: Add output checking in encoder for DSI port. (Proposing 'N': The right way to handle this is to disable the DSI encoder in DT)
 - 87104f0290952b4fde30de02273fa814f59d3fc9 # soc: renesas: rcar_ems_ctrl: Fix using cpu_up/down() (This is just internal code)
 - ab839ad6cd0a1d63efdcde3c6b9114b5cb60dd4f # arm64: dts: renesas: Add MMNGR driver support for Gen3 devices (This is a local patch file for MMP. So we don't need to upport.)
 - e40851d95f07545b7caae8e56ba252f51aba22c1 # arm64: dts: renesas: Add MMNGRBUF driver node for Gen3 devices (This is a local patch file for MMP. So we don't need to upport.)
 - 5ff30e957a5ca7f34d7992993c997c2b04edcfd9 # arm64: dts: renesas: r8a77950-ulcb: Add MMNGR driver node (This is a local patch file for MMP. So we don't need to upport.)
 - 9b2d60a997c663f12a2851bd5a4739f0eef83fc1 # arm64: dts: renesas: r8a77950-ulcb: Add MMNGRBUF driver node (This is a local patch file for MMP. So we don't need to upport.)
 - 9b3036faf86c1f9d8a474133a61211083847ca2c # arm64: dts: renesas: r8a77951-ulcb: Add MMNGR driver node (This is a local patch file for MMP. So we don't need to upport.)
 - c7c97e6dc69fa20d2c47d4fd827063f5ad939d64 # arm64: dts: renesas: r8a77951-ulcb: Add MMNGRBUF driver node (This is a local patch file for MMP. So we don't need to upport.)
 - ab52bfeb60df060bfd0380e1a17a8ff543202767 # arm64: dts: renesas: r8a77965-ulcb: Add MMNGR support (This is a local patch file for MMP. So we don't need to upport.)
 - 2d65f77c9d25bebc7a39985b15f904a4aa387394 # arm64: dts: renesas: r8a77965-ulcb: Add MMNGRBUF driver node (This is a local patch file for MMP. So we don't need to upport.)
 - 9c86aef66d0b8e1a881ffe2499727ff9b07e7f0c # arm64: dts: renesas: r8a77965-ulcb: Add reserved mem for MMNGR (This is a local patch file for MMP. So we don't need to upport.)
 - af1dc0750dd6ff71009ab69f8d7fc06540970b1b # arm64: dts: renesas: r8a7796{0,1}-ulcb: Add MMNGR support (This is a local patch file for MMP. So we don't need to upport.)
 - a5db45e78b41f565d5e9674d2607958806d632ae # arm64: dts: renesas: r8a7796{0,1}-ulcb: Add MMNGRBUF driver node (This is a local patch file for MMP. So we don't need to upport.)
 - 73b99b650db8e0dde045671982057dc49cb20d4b # arm64: dts: renesas: r8a7796{0,1}-ulcb: Add reserve mem for MMNGR (This is a local patch file for MMP. So we don't need to upport.)
 - 055f0a79c28f36e1cea70223642a6171f94601e2 # arm64: dts: renesas: r8a77950-ulcb: Add VSPM I/F driver node (This is a local patch file for MMP. So we don't need to upport.)
 - 64d0e62cb3fb23724cc2b03510ded6966b76812f # arm64: dts: renesas: r8a77951-ulcb: Add VSPM I/F driver node (This is a local patch file for MMP. So we don't need to upport.)
 - 5dc8f7a109d355a3660678ff3baf461bc135bb59 # arm64: dts: renesas: r8a77965-ulcb: Add VSPM I/F driver node (This is a local patch file for MMP. So we don't need to upport.)
 - 53d82d9c06e894976c4c3fa1408833f85ef04b84 # arm64: dts: renesas: r8a7796{0,1}-ulcb: Add VSPM I/F driver node (This is a local patch file for MMP. So we don't need to upport.)
 - 0838c165d52a833b11d4605099a0d919792b2685 # arm64: dts: r8a77970-eagle: Add reserved memory regions (This is a local patch file for MMP. So we don't need to upport.)
 - 288ff5225a20428dacfcc884bc0fabb78b62dd6b # arm64: dts: r8a77995-draak: Add reserved memory region (This is a local patch file for MMP. So we don't need to upport.)
 - 8bff077f91b36732ea6d8c212b5276cb5a2b8576 # arm64: dts: renesas: Add reserved memory regions for Gen3 devices (This is a local patch file for MMP. So we don't need to upport.)
 - 651c29326d295bf758ac036071bb7ae8fcfcc576 # arm64: dts: renesas: r8a77950-ulcb: Add reserved memory regions (This is a local patch file for MMP. So we don't need to upport.)
 - 19ec3a4cc12b70504658eab0f1a3828d0bccd1f4 # arm64: dts: renesas: r8a77951-ulcb: Add reserved memory regions (This is a local patch file for MMP. So we don't need to upport.)
 - 1f5d1a7de234ec793f16c8df80fea40a8e2cb06a # arm64: dts: r8a779a0-falcon: Enable fakra connector (We don't have a camera board, so we cannot test)
 - 53e7a59ad1c6c5dfa2f02a37c447240187f9d820 # arm64: dts: r8a779a0-falcon: Add reserved memory for CMA (No user needs it upstream currently)
 - e813427e0c6fa06c432a07368707a8158d6bbfc6 # tee: optee: Added optee_rcar_suspend_sync and optee_rcar_resume functions (optee updates marked as 'Abandoned' in bsp392_tee_driver.yaml)
 - 410a118172bf0521db87c23cf431dac508e89710 # tee: optee: Allow to freeze the task waiting for tee-supplicant (optee updates marked as 'Abandoned' in bsp392_tee_driver.yaml)
 - 8e22af2523bab86c8f9784cbdc1668eebdee94b9 # tee: optee: Allow to freeze while waiting for call_queue (optee updates marked as 'Abandoned' in bsp392_tee_driver.yaml)
 - cad1b61a84d24046b542c0d661c96359aaf0dc0d # tee: optee: Allow to freeze while waiting in OPTEE_RPC_WAIT_QUEUE_SLEEP (optee updates marked as 'Abandoned' in bsp392_tee_driver.yaml)
 - d1f03fe70edcca44dcf91156a0973b75bb071ae8 # tee: optee: replace use of ioremap_nocache() with ioremap() (optee updates marked as 'Abandoned' in bsp392_tee_driver.yaml)
 - cebb5b597f49877e70c2a2bebb8cf5fef4744b78 # arm64: dts: Makefile: Comment out compiling of dtbo (Temporary workaround)
 - 89cd2326a1535efcd60de689a9ea914458231754 # PCI: dwc: renesas: Add Renesas R-Car PCIe v4.0 host controller driver (PCIe currently considered broken)
 - 38ee1dba89ce074365fd880cce6951301fe4a268 # arm64: defconfig: Enable Renesas R-Car PCIe v4.0 host controller driver (PCIe currently considered broken)
 - cef156605e3fc10d646d254eb084a82753442284 # arm64: dts: renesas: r8a77951: Unsupport DMA transfer for SCIF2 (Proposing 'N': SCIF2 DMA is documented in Hardware User's Manual rev1.50 onwards)
 - d163ec8d9933856db1cdf8696eeea46cc2507535 # arm64: dts: renesas: Add ADSP node for Gen3 devices (This is a local patch file for MMP. So we don't need to upport.)
 - 06051233d0b57869a31694aec387c1e36a8eca35 # arm64: dts: renesas: Enable ADSP module in Gen3 (This is a local patch file for MMP. So we don't need to upport.)
 - e2002ddf1a8a2d3229cec9f0be1d398099ef2c83 # clk: renesas: r8a77{96, 965, 990}: Add ADSP clock (This is a local patch file for MMP. So we don't need to upport.)
 - bd8056c004649b3bf5572a2461c0fece057108fc # arm64: dts: renesas: r8a77950: Override VCP4 device nodes for R-Car H3 ES1.x (This is a local patch file for MMP. So we don't need to upport.)
 - a59da61b9eeaf098fe0052dcc1cdcb68972c477b # arm64: dts: renesas: r8a7796{0,1}: Add VCP4 device nodes (This is a local patch file for MMP. So we don't need to upport.)
 - f5f9cffdc0ffee589cb73aa91f8486589a5e448c # arm64: dts: renesas: r8a779{51, 65, 90}: Add VCP4 device nodes (This is a local patch file for MMP. So we don't need to upport.)
 - 369b8ac0bfe67c64eb5a5a2f1ce10304cf95da70 # clk: renesas: r8a7795: Add VCP4 clock (This is a local patch file for MMP. So we don't need to upport.)
 - df47d799536c8a1ef50b6219bdacce458c4d3a57 # clk: renesas: r8a77{96, 965, 990}: Add VCP4 clocks (This is a local patch file for MMP. So we don't need to upport.)
 - dfd092d7f6233f3896bbe0d2187d856a16e0b472 # arm64: dts: renesas: Add DEVFREQ support for GSX in Gen3 (This is a local patch file for MMP. So we don't need to upport.)
 - 62c1169e99be451f1b01a98711757a679f3800c3 # arm64: dts: renesas: Add GSX device node for Gen3 devices (This is a local patch file for MMP. So we don't need to upport.)
 - 5e373d28b0314dbb75187d3f04c7f1a7cf730846 # arm64: dts: renesas: Add QoS device node for Gen3 devices (This is a local patch file for MMP. So we don't need to upport.)
 - 5cb62882b7e7e1e8ab46dcd263d555721536c04c # arm64: dts: r8a77951: Add cpg clock and reset for AVS (This is just internal code)
 - 52eb672967b6c2835183a6ac9db66a2a64a56f05 # arm64: dts: r8a7796{0,1}: Add cpg clock and reset for AVS (This is just internal code)
 - 3915c1a5296bc4e7e854a9482b5ce96658504295 # arm64: dts: renesas: r8a779{51, 60, 61}: Add AVS device node (This is just internal code)
 - f0071231dbca3bf65d923804cdd13c66fdb0c62e # arm64: dts: renesas: r8a779{51, 60, 61}: Add AVS support for GSX (This is just internal code)
 - 4d0e01ead7bbca092627559eaba235fd4d046341 # clk: renesas: r8a779{5,6}: Add AVS clock (This is just internal code)
 - bc51c2ab3c4c2d4b82d6d985c6316e4ca9a1bd5d # arm64: dts: renesas: r8a779{51, 60, 61}: Add OPPs table-{1-7} for cpu devices (Proposing 'N': OPPs table-{1-7} are related to AVS, which is tagged "This is just internal code" elsewhere)
 - 5ff1c78ac412635fd85d2504d9361665952240fe # arm64: dts: renesas: r8a7795: Fix clock, reset and power domain for iVDP1C (This is a local patch file for MMP. So we don't need to upport.)
 - ffd2605e45b6a6efd0275a3ab04a32d5994061da # arm64: dts: renesas: r8a779{65,90}: Add iVDP1C device nodes (This is a local patch file for MMP. So we don't need to upport.)
 - f1cd1c62af62c115d3de129c6012f34152ded002 # clk: renesas: r8a7795: Add iVDP1C clocks to ES1.x (This is a local patch file for MMP. So we don't need to upport.)
 - 16e4543e163e2d127a98e542950de6c3ed29acc6 # clk: renesas: r8a7796: Add iVDP1C clock (This is a local patch file for MMP. So we don't need to upport.)
 - 3320f9534920f7fd68f23a9f642809ea90fafab7 # clk: renesas: r8a7796: Remove iVDP1C clock on ES3.0 or later (This is a local patch file for MMP. So we don't need to upport.)
 - 2aea26b255b2909ee7890d0e82a4487de048c590 # arm64: dts: renesas: r8a7795{0,1}: Enable IPMMU-DS1 and IPMMU-MM (should be enabled in board files)
 - af738f70e57d50c54976b2c3ed04f724be78c01e # arm64: dts: renesas: r8a7796{0,1}: Enable IPMMU-DS1 and IPMMU-MM (should be enabled in board files)
 - e2dcec97030dfcd9fadad15c3b749a94a54328ec # arm64: dts: renesas: r8a77995: Enable IPMMU-DS1 and IPMMU-MM (should be enabled in board files)
 - 1830cf2fc365919932bd478cb359ef85668885c4 # arm64: dts: renesas: r8a779{51, 60, 61, 65, 90}: Add the emergency node in thermal-zones
 - 194e992f37ee1971da0002080226af7b4070b2c2 # arm64: dts: renesas: r8a779{51, 60, 61, 65, 90}: Create thermal zone to support IPA (upported already according to Thermal-add_IPA.yaml)
 - dcef78d7ecb2bc0310e7a2b7cac07b86fa72fb90 # arm64: dts: renesas: r8a779{51, 65}: Add brs option (This is a local patch file for MMP. So we don't need to upport.)
 - e88060c134be16f847685f03a91845e47428671b # arm64: dts: renesas: salvator-common: Enable PWM2 (won't be upported because there are no users on the boards)
 - d46bb36fcf3531473d3cbab3a2b458ee22395164 # dt-bindings: display: renesas,lvds: Document r8a77961 bindings (torvalds: 3a9a6f3da073304fe64a27a319760524a6f5f671 # dt-bindings: display: bridge: renesas,lvds: Document r8a77961 bindings)
 - 94b5a6ca4be0d97432e4e6cf6165e40c872228b5 # drm: rcar-du: lvds: Add support for R8A77961 SoC (torvalds: ed6e76676b2657b71a0b9e5e847d96e4de0b394b # drm: rcar-du: lvds: Add r8a77961 support)
 - 30cec76f29d702a6c7b1b163bb7a71eca7f51697 # dt-bindings: thermal: Add yaml bindings for EMS in thermal zones (This is just internal code))
 - efee50aa4b0970701c8f98321cb45a8cd3d9d5a1 # arm64: dts: renesas: r8a77961: Fix fcp channel number (This is a local patch file for MMP. So we don't need to upport.)
 - 4d85d8766699defc82d786189b29c25130fd1253 # arm64: dts: renesas: Add definition for vspm/vsp2 driver (This is a local patch file for MMP. So we don't need to upport.)
 - 9c6ed42d27138d31db229feb12a9c82c8d7f137c # arm64: dts: renesas: r8a77990: Add vspb and vspi0 node for VSP Manager (This is a local patch file for MMP. So we don't need to upport.)
 - 938b08d7f38b14c67204cc82fee95cf611c76f6c # arm64: dts: renesas: Enable vspm/vsp2 driver on Gen3 (This is a local patch file for MMP. So we don't need to upport.)
 - 77f9405ff98c842cfc05be19f427a78c72baca67 # arm64: dts: renesas: r8a77965: Fix power domain for FCPCS (This is a local patch file for MMP. So we don't need to upport.)
 - 6ee241c75f9f29a2ade4649a3d3f1865206f31ad # clk: renesas: r8a779{70, 80}: Add POST clock (No user present in the upporting list.)