summaryrefslogtreecommitdiff
path: root/projects/linux/bsp-41x-upport-request.yaml
AgeCommit message (Collapse)Author
2021-03-31linux: io: add RPC task for V3UWolfram Sang
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
2021-03-31linux: bsp-41x: non-target: add obsolete QSPI patchesWolfram Sang
No need to upport a driver for a device which is already supported upstream (but probably unt # the Software is furnished to do so, subject to the following conditions: # # The above copyright notice and this permission notice (including the next # paragraph) shall be included in all copies or substantial portions of the # Software. # # THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR # IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, # FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. IN NO EVENT SHALL # ADAM JACKSON BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER # IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN # CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. # eventually someone might want to build the kernel modules or tests from # here too, but let's just do libdrm for now AUTOMAKE_OPTIONS = foreign SUBDIRS = libdrm shared-core tests pkgconfigdir = @pkgconfigdir@ pkgconfig_DATA = libdrm.pc EXTRA_DIST = libdrm.pc.in
ile. This includes - Enablement of the VSP manager in DT (the VSP manager is an out-of-tree infrastructure to work around the lack of a userspace framework) - Usage of UIO for display and video capture (upstream uses DRM/KMS and V4L2) - Incorrect usage of DU and LVDS bindings - dw-hdmi driver (we don't have permission to work on that driver) - H3 ES1.x-only changes Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> 2021-03-31linux: mm: Triage completed BSP 4.1.x display commitsLaurent Pinchart Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> 2021-03-21linux: mm: Add bsp41x_set-initial-resolution.yamlJacopo Mondi Add a task to track the configuration of the initial display resolution and record that the proposed solution does not apply to upstream. The selected patches have been moved to bsp-41x-non-target.yaml ticket. Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Jacopo Mondi <jacopo@jmondi.org> 2021-03-21linux: mm: Add bsp41x_validate-max-vga-dot-clockJacopo Mondi Add a task to track the max VGA dot clock handling. Text copied from mm/bsp392_validate-max-vga-dot-clock.yaml task The selected patches have been moved to bsp-41x-non-target.yaml ticket. Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Jacopo Mondi <jacopo@jmondi.org> 2021-03-21linux: mm: Record IFMD upstreamingJacopo Mondi Record VnCSI_IFMD register access protection task. Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Jacopo Mondi <jacopo@jmondi.org> 2021-03-18projects: linux: core: Create R-Car V3M/V3H CPU operating points taskGeert Uytterhoeven Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> 2021-03-18projects: linux: core: Create RPC/HyperFlash DT tasksGeert Uytterhoeven For R-Car H3/M3-W/M3-N RPC, and Salvator-X(S)/ULCB HyperFLASH. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> 2021-03-18linux: bsp-41x: non-target: Move unneeded compatible matchingGeert Uytterhoeven The drivers match against family-specific compatible values, which have always been present in the corresponding upstream DTS files. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> 2021-03-18linux: bsp-41x: non-target: Move R-Car V3U WDT bindingsGeert Uytterhoeven Upstreamed. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> 2021-03-18linux: bsp-41x: non-target: Move R-Car E3 I2C-dvfsGeert Uytterhoeven The BSP commit seems to be a rebased version of an old BSP commit, reverting the upstream solution, and thus should be dropped. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> 2021-03-18linux: bsp-41x: non-target: Move R-Car H3/M3-W/M3-N/E3 CPUIdleGeert Uytterhoeven All upstreamed. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> 2021-03-18linux: bsp-41x: non-target: Move R-Car M3-W+ Salvator-X(S) and ULCBGeert Uytterhoeven Upstream uses r8a77960 and r8a77961 to differentiate. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> 2021-03-18linux: bsp-41x: non-target: Move Ebisu and Salvator-X(S) eMMC no-sd(io)Geert Uytterhoeven All upstreamed. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> 2021-03-18linux: bsp-41x: non-target: Move Ebisu and Salvator-X(S) SDHI IPMMUGeert Uytterhoeven All upstreamed. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> 2021-03-18linux: bsp-41x: non-target: Move R-Car H3/M3-W/M3-N/E3 DU resetGeert Uytterhoeven All upstreamed, but specifying resets for "even" DU channels only. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> 2021-03-18linux: bsp-41x: non-target: Move R-Car M3-W/M3-N/E3 CCREEGeert Uytterhoeven All upstreamed. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> 2021-03-18linux: bsp-41x: non-target: Move defconfig modular in upstreamGeert Uytterhoeven All of these are enabled in the upstream arm64 defconfig, but modular instead of built-in as per upstream policy. Note that CONFIG_CPU_FREQ_STAT_DETAILS was removed in v4.11. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> 2021-03-18linux: bsp-41x: non-target: Move dtbo target ruleGeert Uytterhoeven V5.12-rc1 gained support for building DT overlay targets. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> 2021-03-18linux: bsp-41x: non-target: Move R-Car V3H/V3M QSPI FLASHGeert Uytterhoeven All upstreamed. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> 2021-03-18linux: bsp-41x: non-target: Move Draak and Ebisu RGMIIGeert Uytterhoeven No longer needed or not needed upstream. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> 2021-03-18linux: bsp-41x: non-target: Move R-Car V3H IPMMU-VC0 fixGeert Uytterhoeven The non-UIO part was upstreamed in v5.4-rc1, but it was reverted in the BSP by 6ada092d0ab44731 ("uio stuff for BSP7"). Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> 2021-03-17linux: bsp-41x: non-target: Move support for non-connected CSI-2 receiverNiklas Söderlund If the firmware lists a CSI-2 receiver as enabled but it's not connected to a CSI-2 transmitter the firmware description is faulty as it only describes half the CSI-2 bus. The CSI-2 bus is not a plug-and-play bus so either the bus is populate or it's not. Extending the CSI-2 receiver to probe and exist in an inoperable state makes no sens. Note this does not prevent the CSI-2 receiver node from being described in DT it just can't be enabled if it's not connected to a CSI-2 transmitter. Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> 2021-03-17linux: bsp-41x: mm vin triageNiklas Söderlund Move mm vin commits from bsp-41x to separate tasks. Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> 2021-03-17linux: bsp-41x: non-target: Move VIN no-op and defconfig commitsNiklas Söderlund Commits that are no-ops and defconfig changes are not a good target to upport. Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> 2021-03-17linux: bsp-41x: non-target: Move VIN continues mode switchNiklas Söderlund The upstream VIN driver have moved to use an internal scratch buffers which side steps all the problems with continuous vs non-continuous capture. Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> 2021-03-17linux: bsp-41x: mm csi2 triageNiklas Söderlund Move mm csi2 commits from bsp-41x to separate tasks. Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> 2021-03-17linux: mm Add task for V4L2 multiplexed streamsNiklas Söderlund There have been much debate about how multiplexed streams should be modeled in V4L2. There are multiple touch points in the BSP for this both for CSI-2 buses and to some extend GMSL. Add a catch all task that can collect all BSP use-cases where the current V4L2 limitations are worked around. Then when the upstream design is prepared we can make sure it will be able to cover all of the BSP needs. Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> 2021-03-17linux: bsp-41x: mm adv748x triageNiklas Söderlund Move mm adv748x commits from bsp-41x to separate tasks. Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> 2021-03-17linux: bsp-41x: mm adv7604 triageNiklas Söderlund Move mm adv7604 commits from bsp-41x to separate tasks. Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> 2021-03-11projects: linux: core: Add task to enable full cpufreq/dvfsGeert Uytterhoeven Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> 2021-03-02projects: linux: io: add V3U task for CMT and TMUWolfram Sang Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> 2021-03-02linux: bsp-41x: move optee node patches to non-targetWolfram Sang Reason given in periject commit a01c811202b8602d8a3d224262b94a1a97a7bd97. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> 2021-02-05linux: bsp-41x: move provisional & in-house patches to non-targetWolfram Sang Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> 2021-02-05linux: bsp-41x: move "Proposing N" patches to non-targetWolfram Sang Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> 2021-02-05linux: bsp-41x: move internal and local patches to non-targetWolfram Sang Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> 2021-02-05linux: bsp-41x: move local MMP patches to non-targetWolfram Sang Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> 2021-02-03linux: bsp-41x: core sysc triageGeert Uytterhoeven Move core sysc commits from bsp-41x to separate tasks. Move upstreamed commits to non target. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> 2021-02-03linux: bsp-41x: core dmac triageGeert Uytterhoeven Move core dmac commits from bsp-41x to separate tasks. Move upstreamed commits to non target. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> 2021-02-03linux: bsp-41x: core ipmmu triageGeert Uytterhoeven Move core ipmmu commits from bsp-41x to separate tasks. Move not-applicable commits to non target. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> 2021-02-03linux: bsp-41x: core pinctrl triageGeert Uytterhoeven Move core pinctrl commits from bsp-41x to separate tasks. Move upstreamed commits to non target. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> 2021-02-03linux: bsp-41x: core clk triageGeert Uytterhoeven Move core clk commits from bsp-41x to separate tasks. Move upstreamed commits to non target. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> 2021-02-03linux: bsp-41x: Move upstreamed R-Car V3U support to non targetGeert Uytterhoeven Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> 2021-02-03linux: bsp-41x: Move upstreamed defconfig to non targetGeert Uytterhoeven Move upstreamed arm64 defconfig updates to non target. Some of these may be modular instead of built-in, as per upstream policies. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> 2021-02-03linux: bsp-41x: Move commits in next-20210202 to non target (summary)Geert Uytterhoeven Move upstreamed commits in next-20210202 to non target (based on one-line summary). Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> 2021-02-03linux: bsp-41x: Move commits in v5.11-rc6 to non target (summary)Geert Uytterhoeven Move upstreamed commits in v5.11-rc6 to non target (based on one-line summary). Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> 2021-02-03linux: bsp-41x: Move commits in v5.11-rc6 to non target (patch-id)Geert Uytterhoeven Move upstreamed commits in v5.11-rc6 to non target (based on git patch-id). Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>