Age | Commit message (Collapse) | Author |
|
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
Quoting bsp392_tee_driver.yaml:
"It's difficult to refactor this driver for upstream. So, mark Abandoned"
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Acked-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
|
|
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
|
|
OPPs table-{1-7} are related to AVS, which is tagged "This is just
internal code" elsewhere.
The included voltage correction fix for R-Car M3-W has been posted.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
|
|
There is no need to keep multiple separate DTS files to accomodate
board variants that differ only in memory configuration: U-Boot will
update memory nodes and dma-ranges properties accordingly.
See commit b3db7be4e3726092 ("ARM: renesas: Update Gen3 PCIe dma-ranges
before boot") in v2019.10-rc2 / rcar-3.10.0.rc1 and later.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
|
|
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
|
|
SYS-DMAC support for R-Car V3U is already upstream.
RT-DMAC has no Linux users.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
|
|
UIO and OSAL are not intended for upstream.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Much-appreciated-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
|
|
The Realtime Module Stop Control Register offsets are unused, and
planned to be removed.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
|
|
Not documented in Hardware User's Manual Rev. 2.20.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
|
|
Rejected by driver author, cfr. for bsp392_dmaengine_rcar-dmac.yaml.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
|
|
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
|
|
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
|
|
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
|
|
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
|
|
Either non-target, or a new upport task.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
|
|
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
|
|
No need to upport a driver for a device which is already supported
upstream (but probably untested on V3H/V3M). Also, add one patch for V3U
which is a workaround.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
|
|
Move display-related BSP 4.1.x upport candidates that are BSP-specific
to the non-target file. This includes
- Enablement of the VSP manager in DT (the VSP manager is an out-of-tree
infrastructure to work around the lack of a userspace framework)
- Usage of UIO for display and video capture (upstream uses DRM/KMS and
V4L2)
- Incorrect usage of DU and LVDS bindings
- dw-hdmi driver (we don't have permission to work on that driver)
- H3 ES1.x-only changes
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The drivers match against family-specific compatible values, which have
always been present in the corresponding upstream DTS files.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
Upstreamed.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
The BSP commit seems to be a rebased version of an old BSP commit,
reverting the upstream solution, and thus should be dropped.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
All upstreamed.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
Upstream uses r8a77960 and r8a77961 to differentiate.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
All upstreamed.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
All upstreamed.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
All upstreamed, but specifying resets for "even" DU channels only.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
All upstreamed.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
All of these are enabled in the upstream arm64 defconfig, but modular
instead of built-in as per upstream policy.
Note that CONFIG_CPU_FREQ_STAT_DETAILS was removed in v4.11.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
V5.12-rc1 gained support for building DT overlay targets.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
All upstreamed.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
No longer needed or not needed upstream.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
The non-UIO part was upstreamed in v5.4-rc1, but it was reverted in the
BSP by 6ada092d0ab44731 ("uio stuff for BSP7").
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
If the firmware lists a CSI-2 receiver as enabled but it's not connected
to a CSI-2 transmitter the firmware description is faulty as it only
describes half the CSI-2 bus. The CSI-2 bus is not a plug-and-play bus
so either the bus is populate or it's not. Extending the CSI-2 receiver
to probe and exist in an inoperable state makes no sens.
Note this does not prevent the CSI-2 receiver node from being described
in DT it just can't be enabled if it's not connected to a CSI-2
transmitter.
Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Commits that are no-ops and defconfig changes are not a good target to upport.
Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The upstream VIN driver have moved to use an internal scratch buffers
which side steps all the problems with continuous vs non-continuous
capture.
Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
|
|
Cfr. comments for bsp392_clk_renesas_intc_clock_removal.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
Moved away from non-target, this is in deed an issue.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
|
|
Reason given in periject commit
a01c811202b8602d8a3d224262b94a1a97a7bd97.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
|
|
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
Cfr. comments for bsp392_iommu_ipmmu-vmsa.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
|
|
Cfr. comments for bsp392_clk_renesas_z_z2_clocks.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
|
|
Fixes: 4386f2943bd8781f ("linux: bsp-41x: core sysc triage")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
Fixes: bcbdb54ec922959d ("linux: bsp-41x: core ipmmu triage")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
Fixes: 97128cf7be0b2f36 ("linux: bsp-41x: core pinctrl triage")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
Fixes: 1ee0c1a78540a504 ("linux: bsp-41x: core clk triage")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
Fixes: d233c389f646c255 ("linux: bsp-41x: Move upstreamed R-Car V3U support to non target")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
Fixes: a31097f9cc708561 ("linux: bsp-41x: Move upstreamed defconfig to non target")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|