summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2019-11-25projects: linux: core: Add bsp396 for adding iommus of sdhiYoshihiro Shimoda
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2019-11-25Makefile: add .git/hooks/pre-commitKuninori Morimoto
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2019-11-25scripts/pre-commit: Auto-generate keys when neededGeert Uytterhoeven
Generate unique keys for YAML project files lacking them. There are two minor issues left: 1. Due to the "git add", not only the key is added to the file, but also any other changes that are not yet staged, 2. When doing "git add <file>; git commit <file>", the addition of the key is also left in the unstaged changes as a side effect, so "git diff" still shows that change as uncommitted. More investigation shows this only happens when passing the file name to the "git commit" command. Hence it does not happen when doing "git add <file>; git commit". Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
2019-11-25scripts: Add a pre-commit hook to validate YAML project filesGeert Uytterhoeven
To enable: ln -s ../../scripts/pre-commit.sh .git/hooks/pre-commit Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2019-11-21project: linux: mm: Add GMSL tracking taskKieran Bingham
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2019-11-20projects: linux: io: Add I2C Probe rename taskKieran Bingham
2019-11-14scripts: html.py: Change counting of "upstream" and "done"Yoshihiro Shimoda
Even if the tasks' status is "New", "Active", "Blocked" or "Paused", the def bsp on htmi.py increases cnt_{up,all} when task_commit_upstream returns non-zero. However, these countings are possible to overlook which bsp patches are still in progress. So, this patch changes the task done counting. Also adds task's status related upported patches counting like below: bsp:184/upstream:160 = 87.0% --> keep as-is. task:57/done:43 = 75.4% (bsp:184/upstream:106 = 57.6%) ~~~~~~~ ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ changed add Suggested-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
2019-11-14Makefile: don't depend dirKuninori Morimoto
Current each files are depend its dir, but because of it, sometimes we needed to run "make" twice. This patch creates dir as 1 target, and each files never depends it. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
2019-11-12project: linux: io: Abandoned bsp395_SDHIYoshihiro Shimoda
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> [wsa: mark this one as 'Abandoned' instead of 'Done'. Minor rewording] Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
2019-11-12project: linux: io: Abandoned bsp392_SDHI_HS400_addYoshihiro Shimoda
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> [wsa: mark this one as 'Done' instead of 'Abandoned'. Minor rewording] Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
2019-11-12project: linux: io: Add bsp397_SDHIYoshihiro Shimoda
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
2019-10-30html.py: indicate update timeKuninori Morimoto
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
2019-10-24projects: linux: io: update tasks after updates 20191010Wolfram Sang
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
2019-10-04projects: linux: core: Mark IPMMU cache snoop disable doneGeert Uytterhoeven
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2019-10-04Auto-update sweep for v5.4-rc1Geert Uytterhoeven
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2019-10-02html.py: add status at bsp()Kuninori Morimoto
We want to count "Done" status upport patch as done even though it doesn't have upstream patch. This patch indicate status. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
2019-10-02html.py: use existing relpath_y2h() at bsp()Kuninori Morimoto
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
2019-09-30Makefile: fixup make orderKuninori Morimoto
Current periject need to make many times. It is because of make order. This patch fixup it. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
2019-09-13projects: linux: io: update tasks after updates 20190913Wolfram Sang
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
2019-09-05projects: linux: core: Create bsp396 R-Car E3 PFC upport taskGeert Uytterhoeven
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2019-09-05projects: linux: core: Create bsp396 IPMMU upport taskGeert Uytterhoeven
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2019-09-03projects: linux: mm: update ALSA SoC cleanup statusKuninori Morimoto
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
2019-09-03Makefile: update Menu when new file/folder was createdKuninori Morimoto
Current periject doesn't update Menu Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
2019-08-22projects: linux: io: update tasks after meeting 20190822Wolfram Sang
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
2019-08-22projects: linux: mm: Add CMM support entryJacopo Mondi
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2019-08-21projects: linux: io: update tasksWolfram Sang
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
2019-08-20BSP 3.9.6 upport-request-file: Remove upstreamed commitsGeert Uytterhoeven
The following commits were already upstreamed when the list was created: bsp: 63ec9d6fc03d5692 ("arm64: dts: r8a77990: Fix SCIF5 DMA channels") v5.1: e20119f7eaaaf6aa ("arm64: dts: renesas: r8a77990: Fix SCIF5 DMA channels") bsp: 2fba5e0e94db930a ("media: i2c: adv748x: Use devm to allocate the device struct") v5.1: fb517583b3fe0bb6 ("media: i2c: adv748x: Use devm to allocate the device struct") bsp: 620f3e493e55cf95 ("media: rcar-vin: Allow independent VIN link enablement") v5.1: c5ff0edb8e2270a7 ("media: rcar-vin: Allow independent VIN link enablement") bsp: 3058f51605307b06 ("clk: renesas: r8a77{95,96,965,990}: Rename DRIF clock names") v5.2: 3c14505c68ca6b3b ("clk: renesas: rcar-gen3: Rename DRIF clocks") bsp: 46a818b22337d135 ("clk: renesas: rcar-gen3: Fix cpg_sd_clock_round_rate return value") v5.2: b953eaaeb58efc94 ("clk: renesas: rcar-gen3: Fix cpg_sd_clock_round_rate() return value") bsp: f920a58743e6980b ("pinctrl: sh-pfc: r8a77990: Rename RTS{0,1,3,4}# pin function definitions") v5.2: 624a7a12cc0cc776 ("pinctrl: sh-pfc: rcar-gen3: Rename RTS{0,1,3,4}# pin function definitions") bsp: e4118df28958fdcc ("pinctrl: sh-pfc: r8a77965: Fix SEL_NDF name") bsp: 988d160a4e6f4e0c ("pinctrl: sh-pfc: r8a7796: Rename SEL_NDFC to SEL_NDF") v5.2: e551122cdb7fcb9a ("pinctrl: sh-pfc: rcar-gen3: Rename SEL_NDFC to SEL_NDF") bsp: 79bbcf1d8d76fd0a ("pinctrl: sh-pfc: r8a77{95,96,965}: Rename SEL_ADG_B to SEL_ADGB and rename SEL_ADG_C to SEL_ADGC") v5.2: a040f3dec8eb7b11 ("pinctrl: sh-pfc: rcar-gen3: Rename SEL_ADG_{A,B,C} to SEL_ADG{A,B,C}") Hence remove them. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2019-08-20BSP 3.9.6 upport-request-file: Remove YAMLized commitsGeert Uytterhoeven
All of these are already present in YAML files: - addfe9203290e3c2 ("mmc: renesas_sdhi: Fix hang up in HS400 timing mode selection") - b2e044a3602f7f9f ("mmc: renesas_sdhi: Change HS400 manual calibration value for r8a77990") - 2e4d341d1cc11c05 ("ravb: Protect access to ts_skb_list with spinlock.") - 444401e833c4ad62 ("ravb: Fix use-after-free ravb_tstamp_skb") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2019-08-20projects: linux: core: Update R-Car E3 DT statusGeert Uytterhoeven
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2019-08-20projects: linux: core: Mark IPMMU suspend/resume doneGeert Uytterhoeven
Included in v5.3-rc1. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2019-08-20projects: linux: core: virt: Add GPIO Aggregator RFCGeert Uytterhoeven
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2019-08-20projects: linux: core: Update Ebisu DT statusGeert Uytterhoeven
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2019-08-20Auto-update sweep for v5.3-rc5Geert Uytterhoeven
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2019-08-20projects: linux: core: cpuidle: Clarify blocked stateGeert Uytterhoeven
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2019-08-01projects: linux: io: update tasks after updates 20190711Wolfram Sang
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
2019-07-25projects: linux: mm: rcar-csi2: Update driver with new datasheet informationNiklas Söderlund
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
2019-07-25projects: linux: mm: r8a77995: Enable VINNiklas Söderlund
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
2019-07-25projects: linux: mm: r8a77990: Fix rcar-vin and rcar-csi nodesNiklas Söderlund
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
2019-07-25projects: linux: mm: adv748x: Fix reg hex value for r8a77990-ebisuNiklas Söderlund
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
2019-07-25projects: linux: mm: adv748x: Allow routing SD to TXANiklas Söderlund
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
2019-07-22Add upport-request file for BSP 3.9.6Kuninori Morimoto
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
2019-07-22projects: linux: mm: tidyup yaml rule for r8a77990/r8a77995 DU/CPG resetKuninori Morimoto
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
2019-07-22Merge branch 'viewer' into HEADKuninori Morimoto
2019-07-16projects: linux: mm: r8a77990, r8a77995: add DU CPG resetSimon Horman
2019-07-16projects: linux: mm: r8a77990, r8a77995: correct DU register rangeSimon Horman
2019-07-16projects: linux: mm: Add DU dependency to LVDSSimon Horman
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2019-07-16projects: linux: mm: r8a77990, r8a77995: DU DPAD supportSimon Horman
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2019-07-16projects: linux: mm: Validate max VGA dot clockSimon Horman
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2019-07-16projects: linux: mm: r8a77995: Add LVDS device supportSimon Horman
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2019-07-16projects: linux: mm: r8a77995: Enable HDMI display outputSimon Horman
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-29 06:23:31 +0000