diff options
Diffstat (limited to 'wiki/H3_Salvator-X.wiki')
-rw-r--r-- | wiki/H3_Salvator-X.wiki | 127 |
1 files changed, 127 insertions, 0 deletions
diff --git a/wiki/H3_Salvator-X.wiki b/wiki/H3_Salvator-X.wiki new file mode 100644 index 0000000..282958d --- /dev/null +++ b/wiki/H3_Salvator-X.wiki @@ -0,0 +1,127 @@ +h1. H3 Salvator-x + +h2. Update FirmWare + +# download update script from below +# run script + +h3. SW10 + +0 corresponds to the switch in the OFF position and 1 to the ON position. Bits are given in the 1-8 order. + +<pre> +for update: xxxx 0000 +for use : xxxx 1100 (HyperFlash = 80MHz, stable) or + xxxx 1101 (HyperFlash = 160MHz, aggressive) +</pre> + +Maybe it is *1100 1100* or *1100 1101* on your board + +h3. Run script + +see readme +<pre> +./do_xls2.expect /dev/ttyUSB1 ./AArch64_secure_writer.mot ./table.txt +</pre> +or +<pre> +for ES1.0 : ./do_xls2.expect /dev/ttyUSB1 57600 ./AArch64_secure_writer.mot ./table.txt +for ES1.1 : ./do_xls2.expect /dev/ttyUSB1 115200 ./AArch64_secure_writer_es11.mot ./table.txt +for ES2.0 : ./do_xls2.expect /dev/ttyUSB1 115200 ./AArch64_Gen3_Scif_MiniMon_H3ES2.0_V0.03.mot ./table.txt +</pre> + +h3. Log + +<pre> +> ./do_xls2.expect /dev/ttyUSB1 ./AArch64_secure_writer.mot ./table.txt +uploading loader file +performing xls2 e6320000 000000 bootparam_sa0.srec +performing xls2 e6302000 040000 bl2-salvator-x.srec +performing xls2 e6320000 180000 cert_header_sa6.srec +performing xls2 44000000 1c0000 bl31-salvator-x.srec +performing xls2 44100000 200000 tee-salvator-x.srec +performing xls2 49000000 640000 u-boot-elf.srec +</pre> + +h3. version + +| "v2.2.0":../../wiki/H3_Salvator-X/update_salvator_bootloader_v220.tar.bz2 |BL2: R-Car H3 Loader Rev.1.00 +BL2: Built : 19:20:17, Nov 2 2015 +U-Boot 2015.04 (Nov 02 2015 - 19:20:59) |*require SWICH settings* +- -SW6: 3 pin side- +- SW7: 2 pin side | +| "v2.3.0":../../wiki/H3_Salvator-X/update_salvator_bootloader_v230.tar.bz2 |BL2: R-Car H3 Loader Rev.1.0.1 +BL2: Built : 11:47:26, Nov 19 2015 +U-Boot 2015.04 (Nov 19 2015 - 11:47:49) |*require SWICH settings* +- -SW6: 3 pin side- +- SW7: 2 pin side | +| "v2.7.0 4core":../../wiki/H3_Salvator-X/update_salvator_bootloader_v270-4core.tar.bz2 |BL2: R-Car Gen3 Initial Program Loader(CA57) Rev.1.0.5 +BL2: Built : 12:41:15, Mar 30 2016 +U-Boot 2015.04 (Mar 30 2016 - 12:41:37) |*require SWICH settings* +- -SW6: 3 pin side- +- SW7: 2 pin side | +| "v2.7.0 8core":../../wiki/H3_Salvator-X/update_salvator_bootloader_v270-8core.tar.bz2 |BL2: R-Car Gen3 Initial Program Loader(CA57) Rev.1.0.5 +BL2: Built : 12:59:01, Mar 30 2016 +U-Boot 2015.04 (Mar 30 2016 - 12:41:37) |*require SWICH settings* +- -SW6: 3 pin side- +- SW7: 2 pin side | +| "v2.9.0 for 8ch camera":../../wiki/H3_Salvator-X/update_salvator_bootloader_v290-v2.tar.bz2 |BL2: R-Car Gen3 Initial Program Loader(CA57) Rev.1.0.7 +BL2: Built : 16:41:30, May 26 2016 +U-Boot 2015.04 (May 26 2016 - 16:49:14) |*require SWICH settings* +- -SW6: 3 pin side- +- SW7: 2 pin side | +| "v2.11.0 no lossy":../../wiki/H3_Salvator-X/update_salvator_bootloader_v2110-nolossy.tar.bz2 |BL2: R-Car Gen3 Initial Program Loader(CA57) Rev.1.0.8 +BL2: Built : 19:35:27, Jul 27 2016 +U-Boot 2015.04 (Jul 25 2016 - 20:28:04) |*require SWICH settings* +- -SW6: 3 pin side- +- SW7: 2 pin side | +| "v2.12.0":../../wiki/H3_Salvator-X/update_salvator_bootloader_v2120.tar.bz2 | BL2: R-Car Gen3 Initial Program Loader(CA57) Rev.1.0.9 +BL2: Built : 11:32:54, Sep 13 2016 +U-Boot 2015.04 (Sep 13 2016 - 11:32:36) | PMIC will be shutdown on this version when S2RAM +*require SWICH settings* +- -SW6: 1 pin side (default is 3)- +- SW7: 1 pin side (default is 2) +- SW8: all OFF +*How to S2RAM* +- Set to PMIC to backup mode via i2c-tools command +<pre># i2cset -f -y 7 0x30 0x20 0x0F</pre> +- (Suspend) Change SW23 to OFF +- Request System Suspend to RAM +<pre># echo mem > /sys/power/state</pre> +- (Resume) Change SW23 to ON | +| "v2.16.0":../../wiki/H3_Salvator-X/update_salvator_bootloader_v2160.tar.bz2|BL2: R-Car Gen3 Initial Program Loader(CA57) Rev.1.0.12 +BL2: Built : 16:03:29, Jan 30 2017 +U-Boot 2015.04 (Jan 30 2017 - 16:03:32)|*require SWICH settings* +- -SW6: 1 pin side (default is 3)- +- SW7: 1 pin side (default is 2) +- SW8: all OFF +*How to S2RAM* +see above +*uboot position* was moved from *H'49000000* to *H'50000000* | +| "v2.19.0+es2.0":../../wiki/H3_Salvator-X/update_salvator_bootloader_v2190+es20.tar.bz2 |BL2: R-Car Gen3 Initial Program Loader(CA57) Rev.1.0.14 +BL2: Built : 12:21:23, Apr 27 2017 +U-Boot 2015.04 (Apr 27 2017 - 12:21:26)|*require SWICH settings* +- -SW6: 1 pin side (default is 3)- +- SW7: 1 pin side (default is 2) +- SW8: all OFF +*How to S2RAM* +see above| +| "v2.23.0":../../wiki/H3_Salvator-X/update_salvator_bootloader_v2230.tar.bz2 |BL2: R-Car Gen3 Initial Program Loader(CA57) Rev.1.0.16 +BL2: Built : 16:16:53, Oct 2 2017 +U-Boot 2015.04 (Oct 02 2017 - 16:12:31)|*require SWICH settings* +- -SW6: 1 pin side (default is 3)- +- SW7: 1 pin side (default is 2) +- SW8: all OFF +*How to S2RAM* +see above| + + +h2. Release Note + +* "Yocto Release Note":../../wiki/H3_Salvator-X/RENESAS_RCH3M3_YoctoReleaseNote_E_v2.23.0.pdf +* "IPL Release Note":../../wiki/H3_Salvator-X/RENESAS_RCH3M3_IPL_ReleaseNote_E_v1.0.16.pdf + +h1. Files + +"zip: Gen3 MiniMonitor v3.03":../../wiki/H3_Salvator-X/Gen3_MiniMonitor_V3.03-20180208.zip +"mot: Gen3 H3/M3 MiniMon v3.03":../../wiki/H3_Salvator-X/AArch64_Gen3_H3_M3_Scif_MiniMon_V3.03.mot |