diff options
Diffstat (limited to 'wiki/Chat_log/20171005-io-chatlog')
-rw-r--r-- | wiki/Chat_log/20171005-io-chatlog | 121 |
1 files changed, 121 insertions, 0 deletions
diff --git a/wiki/Chat_log/20171005-io-chatlog b/wiki/Chat_log/20171005-io-chatlog new file mode 100644 index 0000000..05ef52a --- /dev/null +++ b/wiki/Chat_log/20171005-io-chatlog @@ -0,0 +1,121 @@ +10:17 < geertu> Marex: Core related? I should hand over the mic to Wolfram... +10:17 < Marex> shimoda: I sent out the xhci patch I plan to submit to the U-Boot list to the periperi list first, the license grant should be OK, can you double-check please ? +10:18 < Marex> geertu: well it's inbetween, U-Boot is core and xhci is IO +10:18 < shimoda> Marex: sure, I will check it +10:18 < Marex> shimoda: thank you ! +10:18 < Marex> shimoda: it'd be convenient if this worked out, since now I can just type "usb reset" and it works :) +10:19 < Marex> shimoda: it's hassle-free +10:19 < shimoda> Marex: nice! :) +10:20 < wsa_> geertu: don't worry, I am fine +10:20 < Marex> shimoda: btw re HS200/400 and SDR104, I am a bit blocked by the SD/MMC maintainer in U-Boot, sorry about that +10:20 < Marex> shimoda: he's not picking patches as fast as I'd like him to +10:20 < Marex> shimoda: I'm looking for ways to ... uh ... expedite that process +10:21 < shimoda> Marex: i got it. thanks! +10:21 < Marex> shimoda: you're welcome, I'll keep you updated +10:22 < wsa_> Marex: is yamada-san working on this, too? +10:22 < Marex> wsa_: Masahiro Yamada-san ? +10:22 < wsa_> hai +10:22 < Marex> wsa_: he works for socionext, although he did implement the uniphier-sd which I now use on RCar Gen3 +10:22 * neg brb 2 min +10:22 < Marex> wsa_: their block doesn't support the HS200/400/SDR104 modes though, that's renesas specific +10:23 < Marex> wsa_: so he just reviews my uniphier-sd patches (which is nice) and makes sure they work on both +10:23 < wsa_> I see +10:24 < Marex> wsa_: the blocker really is the SD/MMC subsystem maintainer, he just doesn't respond much +10:24 < Marex> wsa_: some not long time ago I was really tempted to just replace him and start handling the SDMMC stuff myself +10:25 < Marex> wsa_: but then he came back, at like 5 mins to 12 and rolled out a PR ... +10:25 < wsa_> how about co-maintaining? +10:25 < Marex> wsa_: I feel like I'm hoarding functions ;-) +10:26 < wsa_> I see +10:26 < wsa_> that happens easily, yes +10:26 < Marex> wsa_: right +10:26 * neg back +10:26 < Marex> wsa_: and since U-Boot isn't as prestigeous as linux, maintainers don't really queue up to do it +10:27 < wsa_> okay +10:27 < Marex> wsa_: anyway ... maybe we should continue rather than complain about lack of manpower all over the place ? :) +10:27 < wsa_> ack +10:29 < wsa_> geertu: can i take over? or did i already? :) +10:29 < geertu> wsa_: I think you already did +10:30 < jmondi> ETHER is working as well \o/ (sorry to jump in with random messages, is rude, but I'm happy, now the peach is a grown up baby!) +10:30 < wsa_> well, then: welcome to the already started io meeting :D +10:30 < wsa_> jmondi: no problem, but only for success messages ;) +10:31 < jmondi> wsa_: I would be mostly silent then :) +10:31 < wsa_> ok, i collected (and rephrased) the ABC questions +10:31 < wsa_> and added a comment here and there, here they go: +10:31 < wsa_> A) +10:31 < wsa_> * Geert worked on RAVB PHY reset to support supsend/resume +10:31 < wsa_> * Niklas did SDR104/SDIO tests on Koelsch +10:31 < wsa_> * Simon got the RAVB RX checksum offload patch merged +10:31 < wsa_> * Uli got the HSCIF HW timeout patch merged and resent the HSCIF sampling point shift patch +10:31 < wsa_> (the latter raised a few comments, though) +10:31 < wsa_> * Shimoda-san got f_printer driver merged and fixed quite some USB issues and added quite some +10:31 < wsa_> DT nodes, and added suspense/resume support for USB PHY +10:31 < wsa_> * Wolfram discussed add. tasks and upport lists, added I2C to Salvator-XS, resend the eMMC drive +10:31 < wsa_> strength patches, and commented on SDHI SDR104 tests and regulator patches +10:31 < wsa_> B) +10:31 < wsa_> * Geert will keep an eye to get RAVB PHY reset working and wants to tackle MSIOF again +10:31 < wsa_> (multiple chip selects, I assume?) +10:31 < wsa_> * Simon starts working on HS400 +10:31 < wsa_> (nice timing because Marek works on HS400 for U-Boot currently) +10:31 < wsa_> * I assume Uli will keep working on the sampling point patch? +10:31 < wsa_> * Shimoda-san works on the USBHS driver more if he gets feedback from HW team +10:31 < wsa_> * Wolfram wants to finalize the I2C DMA patches, improve the I2C fault injector and start +10:31 < wsa_> preparing the talk & showcase about it for ELCE, debug SDR104 on Gen2, and add. tasks +10:31 < wsa_> plus upport lists, of course. +10:31 < wsa_> C) +10:31 < wsa_> * Shimoda-san's patches for USB2.0 phy for r8a77995 got no feedback from PHY maintainer +10:31 < wsa_> * Wolfram wonders where all the time since San Sebastian has gone +10:32 < wsa_> please have a look if everything is correct or i missed something +10:33 < geertu> wsa_: German tax rate is how many %? ;-) +10:34 < wsa_> too many :D +10:35 < wsa_> it stops at 42% IIRC +10:35 < wsa_> okay, there don't seem to be any comments +10:35 < wsa_> other than taxes +10:35 < horms> HS400 will be fun, but the fun hasn't started yet. Tax is less fun, we can swap notes another time. +10:36 < Marex> horms: HS400 seems like HS200 DDR, why the worry ? +10:36 < wsa_> I don't really have other topics for now; I'd think the SDR stuff and the upport list discussion are better suited for emails currently +10:36 < wsa_> unless there is something you guys want to discuss right now +10:37 < horms> Marex: thanks for the encoragement :) +10:38 < Marex> horms: well I was serious, it doesn't seem all that different +10:38 < wsa_> at least we won't have "long cable" problems with HS400 :) +10:38 < Marex> ^_^' +10:38 < geertu> wsa_: Why not? +10:38 < wsa_> HS400 is eMMC only +10:38 < horms> eMMC is on the board +10:40 < wsa_> dammsan: do you need anything from me regarding add. tasks? +10:40 < geertu> UHS-III is even faster, and using actual cards? +10:41 < wsa_> looks like it +10:42 < wsa_> maybe microsd only, though +10:42 < Marex> wsa_: they use PCIe-like bus +10:42 < Marex> for UHS3 that is +10:43 < Marex> the full-size UHS3 cards have extra pads for that, differential ones +10:43 < Marex> I think the bus might even be PCIe compatible right away +10:43 < wsa_> heh +10:44 < Marex> well that's where it's all headed anyway +10:44 < wsa_> let's see what comes out of that :) +10:44 < Marex> USB3 and PCIe use the same physical layer, the SD probably joins that too +10:44 < Marex> shimoda: I just received USB3 Totalphase Beagle 5000 V2 :-3 +10:44 < wsa_> let's see how this will all end up in some R-Car Generation +10:45 < wsa_> but for now, it is SDR104 and HS400 :) +10:45 < wsa_> so, last call for topics from your side +10:46 < wsa_> aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaand we are done! +10:46 < wsa_> Thank you guys! +10:46 < neg> thanks all +10:46 < shimoda> Marex: wow! nice! +10:46 < shimoda> thank you! +10:47 < jmondi> thank you all! +10:47 < Marex> thank you all! +10:47 < jmondi> neg: pinchartl: kbingham: catch you later +10:47 < uli__> see you +10:47 < horms> wsa_: were we going to talk about upporting about now? +10:48 < wsa_> i don't think so +10:48 < wsa_> i mean we can do +10:48 < wsa_> but i think it would be good to have morimoto-san here, too +10:48 < Marex> shimoda: jupp, so many hard-to-debug USB problems are hopefully fixed soon :) +10:48 < horms> Sure. Perhaps we can continue the discussion via email. +10:48 < wsa_> i'd suggest to keep discussing via email until then +10:49 < wsa_> ;D +10:49 < shimoda> Marex: I hope so :) +10:49 < horms> my question for you would be: do you think it would be more useful for Kaneko-san to help with keeping the upport list up to date, or to focus on upporting trivial patches +10:52 < wsa_> hmmm +10:53 -!- horms [~horms@217.111.208.18] has quit Quit: Leaving +10:55 < wsa_> seems this answer also needs to go via email... |