summaryrefslogtreecommitdiff
path: root/utils
AgeCommit message (Collapse)Author
2019-01-14kmstest: use open_modesetting_cardTomi Valkeinen
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2019-01-11kmstest: show sync polaritiesTomi Valkeinen
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2018-11-01wbm2m: Add selection/crop supportBenoit Parrot
Add crop/selection parameter support. Signed-off-by: Benoit Parrot <bparrot@ti.com>
2018-11-01wbm2m: Add resolution and format to output filenameBenoit Parrot
To make it easier to deal with the resulting file, the filename should show the resolution and pixel format used. Signed-off-by: Benoit Parrot <bparrot@ti.com>
2018-09-10kmstest: give an error if master permissions could not be setTomi Valkeinen
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2018-09-03kmstest: don't use "unknown" connectors by defaultTomi Valkeinen
When using kmstest without parameters, use only connectors in Connected state, not in Unknown state. To use Uknown state connectors, the connector must be specified in the cmdline. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2018-08-28kmsprint: use connector_statusTomi Valkeinen
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2018-08-23kmstest: fix "Could not find available crtc" when crtc was not connected.Tomi Valkeinen
If a connector doesn't already have a crtc, we might get "Could not find available crtc" error from kmstest as it fails to search for the crtc. Fix this. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2018-06-29kmstest: set props in legacy modesetting tooTomi Valkeinen
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2018-06-29kmstest: print property idsTomi Valkeinen
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2018-01-05kmstest: Separate reservation phase from command line parsingJyri Sarha
In the new order the planes are not reserved before the whole command line is parsed. This way we know the color format of the framebuffer that is going to be on the reserved plane and we can select a plane that supports the format. After this patch kmstest makes no distinction between primary and overlay planes if atomic mode setting is supported. If no plane is specified then a default plane, matching the screen size is created. Signed-off-by: Jyri Sarha <jsarha@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2018-01-05kmstest: Implement simplistic propery support behind -P flag.Jyri Sarha
Non atomic modesetting is not supported and there is no translation from various property types to unsigned 64-bit integer. Instead the property values are simply converted from string with stoull(str, 0, 0). Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2017-11-22kmstest: use resmanTomi Valkeinen
2017-10-24kmstest: rename ObjectType to ArgTypeTomi Valkeinen
2017-10-24wbcap: support saving to fileTomi Valkeinen
2017-10-20utils: wbcap interlace supportTomi Valkeinen
2017-10-20utils: improve wbcapTomi Valkeinen
2017-10-03kmscapture: fix capture videomode heuristicTomi Valkeinen
2017-10-03kmscapture: clean up fb handlingTomi Valkeinen
2017-10-03kmscapture: fix v4l buftypeTomi Valkeinen
2017-10-03Rework framebuffer classesTomi Valkeinen
Drop (I)MappedFramebuffer, as it doesn't really provide any value, and have most of the methods be present in IFramebuffer with default exception throwing implementation. This gives us simpler way to use the framebuffers, as almost always we can just use a pointer to IFramebuffer.
2017-09-04kmstest: fix --sync modeTomi Valkeinen
DRM sends page flips for each crtc in a commit. kmstest expected to get a single flip event for a single commit, which caused --sync not to work with two displays. Fix this by making kmstest skip the first flip event.
2017-09-04kmstest: add help text about env variablesTomi Valkeinen
2017-08-04kmstest: fix error in help textTomi Valkeinen
2017-06-30kmsprint: print connectors even if disconnectedTomi Valkeinen
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2017-03-21kmstest: check return values from reserve_*Tomi Valkeinen
2017-03-13kmsprint: show plane's possible crtcsTomi Valkeinen
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2017-03-10kmstest: Add optional argument to the flip option to limit the flipsLaurent Pinchart
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2017-02-13kmsview: Add connector command line argumentLaurent Pinchart
The argument allows specifying which connector to display on. When not set, the current behaviour is preserved. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2017-02-10ExtFb: pass params in vectorsTomi Valkeinen
2017-02-10kmstest: remove get_default_connector()Tomi Valkeinen
2017-02-10use reserve_connector from ResourceManagerTomi Valkeinen
2017-02-10kmstest: Add --view optionTomi Valkeinen
2017-01-25wbcap: fix setup if a display is unconfiguredTomi Valkeinen
2016-12-20kmstest: don't reserve primary_plane if it's not neededTomi Valkeinen
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2016-12-20kmstest: disable crtcs & planes before modesetTomi Valkeinen
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2016-12-20kmstest: fix bug in setups_to_outputs()Tomi Valkeinen
Bad output used to get the crtc, causing crash. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2016-12-12kmstest: use resman to get primary planesTomi Valkeinen
We need to ensure that a primary plane is not already in use. ResourceManager does this for us. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2016-11-21kmstest: use MappedFramebufferTomi Valkeinen
Use MappedFramebuffer instead of DumbFramebuffer in kmstest, except when creating the object. This change makes it possible to easily use other framebuffer objects in kmstest than DumbFramebuffer. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2016-10-11kmstest: be explicit about mode selectionTomi Valkeinen
Instead of searching through the dmt and cea tables (if user has given the option), lets be more explicit about it. Only look for the mode from a single source, and fail if not found there. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2016-10-11kmstest: add --cvt optionTomi Valkeinen
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2016-09-30kmstest: enable display even if crtc doesn't have fbTomi Valkeinen
With atomic modesetting we can enable the crtc without a primary plane. This allows enabling only a plane on the screen. Change set_crtcs_n_planes() to allow this. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2016-09-27kmsprint: fix printsTomi Valkeinen
2016-09-26kmatest: add custom videomode supportTomi Valkeinen
Support custom videomodes when specifying a crtc. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2016-09-26kmatest: split regex strings to multiple linesTomi Valkeinen
Split regex strings to multiple lines to make them slightly more readable. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2016-09-23kmsprint: improve property enum printsTomi Valkeinen
2016-08-24kmstest: rename remaining references to testpatTomi Valkeinen
2016-08-16rename testpat and fbtestpatTomi Valkeinen
2016-08-15support finding fractional vrefreshTomi Valkeinen
2016-08-15testpat & kmsprint: improve mode printsTomi Valkeinen
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-02 23:17:12 +0000