summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2018-11-01videodevice: Add selection API supportBenoit Parrot
Add selection API support to the VideoSteamer class. Signed-off-by: Benoit Parrot <bparrot@ti.com>
2018-11-01wbm2m: Add resolution and format to output filenameBenoit Parrot
To make it easier to deal with the resulting file, the filename should show the resolution and pixel format used. Signed-off-by: Benoit Parrot <bparrot@ti.com>
2018-10-17Add AR12 & AR15 supportTomi Valkeinen
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2018-10-10Add globa_alpha_test.py for DRM per plane "alpha" property testingJyri Sarha
2018-10-10scale.py: Use atomic modesetting and other improvementsJyri Sarha
Add commandline parameters and use more sensible defaults
2018-10-10plane_csc.py: do not assume HDMI output and other improvementsJyri Sarha
2018-10-03trans-test.py: cleanupTomi Valkeinen
2018-10-03test.py: cleanupTomi Valkeinen
2018-09-28Add Android.bp file to build with AOSPAndrew F. Davis
Signed-off-by: Andrew F. Davis <afd@ti.com>
2018-09-28Add include of <cerrno> to various filesAndrew F. Davis
This is needed for building with some version of some compilers where it is not automatically included with the existing include set (clang). Signed-off-by: Andrew F. Davis <afd@ti.com>
2018-09-24py: fix __atomic_req_add_plane when crtc = NoneTomi Valkeinen
2018-09-24trans-test.py: fix usageTomi Valkeinen
2018-09-17py: add AtomicReq extensions and use them in test.pyTomi Valkeinen
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2018-09-10kmstest: give an error if master permissions could not be setTomi Valkeinen
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2018-09-03kmstest: don't use "unknown" connectors by defaultTomi Valkeinen
When using kmstest without parameters, use only connectors in Connected state, not in Unknown state. To use Uknown state connectors, the connector must be specified in the cmdline. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2018-08-28kmsprint: use connector_statusTomi Valkeinen
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2018-08-28connector: add connector_status()Tomi Valkeinen
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2018-08-28py/tests: rename zorder to zposTomi Valkeinen
zpos is the official property. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2018-08-23kmstest: fix "Could not find available crtc" when crtc was not connected.Tomi Valkeinen
If a connector doesn't already have a crtc, we might get "Could not find available crtc" error from kmstest as it fails to search for the crtc. Fix this. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2018-08-23Revert "testpat: remove threaded drawing"Tomi Valkeinen
This reverts commit 33246d9b5fb0347aabd62caac1da03440f9e1634. Add threaded drawing back, but have it behind a CMAKE variable so that it can easily be turned off. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2018-08-14Add plane_move.py test for testing plane move between crtcsPeter Ujfalusi
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
2018-08-14trans-test.py: Aesthetic improvementsPeter Ujfalusi
Consider the screen size for the displayed objects and calculate the placement so they look similar on all screen sizes Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
2018-08-10trans-test.py: am4 improvementsTomi Valkeinen
2018-08-03trans-test.py: improvementsTomi Valkeinen
2018-08-03add a simple draw_circle()Tomi Valkeinen
2018-06-29kmstest: set props in legacy modesetting tooTomi Valkeinen
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2018-06-29drmpropobject: add set_prop_value(Property* prop, uint64_t value)Tomi Valkeinen
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2018-06-29kmstest: print property idsTomi Valkeinen
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2018-06-20py: sync: Moded to blob conversion method is called to_blob()Laurent Pinchart
There's no blob() method on mode objects, use to_blob(). Fixes: 66f161d0032e ("py: Add in fence test using swsync") Reported-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2018-06-20py: sync: Fix event handlingLaurent Pinchart
Fancy event handling was dropped in commit 95de32aa7fbb ("py: drop the fancy event handling"). Python tests were updated, but one commit call got forgotten in the sync.py test. Fix it. Fixes: 95de32aa7fbb ("py: drop the fancy event handling") Reported-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2018-05-22testpat: remove threaded drawingTomi Valkeinen
Threading causes easily issues with (at least) static linking. Let's just remove it as it's not really that important. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2018-04-02Add DPI encoderTomi Valkeinen
2018-01-12Use full license text to help github figure out the licenseTomi Valkeinen
2018-01-12alpha-test.py: fixTomi Valkeinen
2018-01-09trans-test.py: fix drawing outside the bufferTomi Valkeinen
2018-01-09add safeguards to draw_*_pixel() to prevent memory corruptionTomi Valkeinen
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2018-01-05kmstest: Separate reservation phase from command line parsingJyri Sarha
In the new order the planes are not reserved before the whole command line is parsed. This way we know the color format of the framebuffer that is going to be on the reserved plane and we can select a plane that supports the format. After this patch kmstest makes no distinction between primary and overlay planes if atomic mode setting is supported. If no plane is specified then a default plane, matching the screen size is created. Signed-off-by: Jyri Sarha <jsarha@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2018-01-05kmstest: Implement simplistic propery support behind -P flag.Jyri Sarha
Non atomic modesetting is not supported and there is no translation from various property types to unsigned 64-bit integer. Instead the property values are simply converted from string with stoull(str, 0, 0). Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2017-12-15py: pyvid: Provide stream_off bindingKieran Bingham
The videodevice module defines a stream_off function call, but this is not available in the python bindings interface. Provide the binding of VideoStreamer::stream_off. Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2017-12-15videodevice: Fix minor spacingKieran Bingham
Provide a space between the return type and the function definition Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2017-12-08py: add convert_vector helperTomi Valkeinen
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2017-12-08py: Add Card crtcs and encoders properties back to the Python bindingsLaurent Pinchart
Commit 706a44abb3aa ("Update to latest pybind11") removed the crtcs and encoders properties from the Card class. Add them back by wrapping the associated C++ methods manually due to a limitation of pybind11. Fixes: 706a44abb3aa ("Update to latest pybind11") Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2017-12-08Fix Python bindings for Connector::get_possible_crtcs() methodLaurent Pinchart
The method returns an std::vector of DRMObject, which isn't supported by the latest pybind11 as explained in commit 706a44abb3aa. Fix it by wrapping the method manually. Fixes: 706a44abb3aa ("Update to latest pybind11") Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2017-11-24pykms: keep Card alive until Blob is goneTomi Valkeinen
2017-11-24travis: add gcc6 & gcc7Tomi Valkeinen
2017-11-24Update to latest pybind11Tomi Valkeinen
Update to latest pybind11 HEAD. We can't use the latest tag (v2.2.0) as it has a regression. There were two problems when updating: 1) Difficulty in managing DrmObject derived classes Most of the DrmObjects are owned by Card, and can't be allocated or freed, but a few of them are allocated and freed by the user. For the former, we need to use unique_ptr with py::nodelete, but that prevents the latter from working. The solution was to not tell the python that the latter classes derive from DrmObject. This seems to be missing feature in pybind11, but I think we can live with it. 2) DrmObjects in STL containers vector<T> where T is a DrmObject derived class doesn't work. We need to have a manual wrapper to return vector<unique_ptr<T, py::nodelete>> instead. This also seems to be a pybind11 missing feature. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2017-11-22resman: use set<> instead of vector<>Tomi Valkeinen
2017-11-22kmstest: use resmanTomi Valkeinen
2017-10-24kmstest: rename ObjectType to ArgTypeTomi Valkeinen
2017-10-24wbcap: support saving to fileTomi Valkeinen