From dcbc93a117b0efaa0e42fa6359eed4a71a9ca341 Mon Sep 17 00:00:00 2001 From: Laurent Pinchart Date: Fri, 10 Jun 2022 02:04:30 +0300 Subject: tests: Convert to formatted string literals Use formatted string literals to replace legacy printf-style string formatting. Signed-off-by: Laurent Pinchart Reviewed-by: Kieran Bingham --- tests/kms-test-allplanes.py | 12 ++++++------ tests/kms-test-brxalloc.py | 28 +++++++++++++--------------- tests/kms-test-connectors.py | 2 +- tests/kms-test-crc.py | 21 ++++++++++----------- tests/kms-test-formats.py | 10 +++++----- tests/kms-test-legacy-modeset.py | 10 +++++----- tests/kms-test-modes.py | 8 ++++---- tests/kms-test-modeset.py | 8 ++++---- tests/kms-test-pageflip.py | 18 +++++++++--------- tests/kms-test-planeposition.py | 16 ++++++++-------- tests/kms-test-routing.py | 10 +++++----- tests/kmstest.py | 30 +++++++++++++++--------------- 12 files changed, 85 insertions(+), 88 deletions(-) diff --git a/tests/kms-test-allplanes.py b/tests/kms-test-allplanes.py index 710ae66..0fe6cfa 100755 --- a/tests/kms-test-allplanes.py +++ b/tests/kms-test-allplanes.py @@ -25,7 +25,7 @@ class AllPlanesTest(kmstest.KMSTest): connectors[crtc] = connector for crtc in self.card.crtcs: - self.start('composition on CRTC %u' % crtc.id) + self.start(f'composition on CRTC {crtc.id}') # Get the connector and default mode try: @@ -45,8 +45,8 @@ class AllPlanesTest(kmstest.KMSTest): self.skip('no plane available for CRTC') continue - self.logger.log('Testing connector %s, CRTC %u, mode %s with %u planes' % \ - (connector.fullname, crtc.id, mode.name, len(planes))) + self.logger.log(f'Testing connector {connector.fullname}, CRTC {crtc.id}, ' + f'mode {mode.name} with {len(planes)} planes') # Create a frame buffer fb = pykms.DumbFramebuffer(self.card, mode.hdisplay, mode.vdisplay, 'XR24') @@ -55,7 +55,7 @@ class AllPlanesTest(kmstest.KMSTest): # Set the mode with a primary plane ret = self.atomic_crtc_mode_set(crtc, connector, mode, fb) if ret < 0: - self.fail('atomic mode set failed with %d' % ret) + self.fail(f'atomic mode set failed with {ret}') continue self.run(3) @@ -67,10 +67,10 @@ class AllPlanesTest(kmstest.KMSTest): destination = kmstest.Rect(offset, offset, fb.width, fb.height) ret = self.atomic_plane_set(plane, crtc, source, destination, fb) if ret < 0: - self.fail('atomic plane set failed with %d' % ret) + self.fail(f'atomic plane set failed with {ret}') break - self.logger.log('Adding plane %u' % plane.id) + self.logger.log(f'Adding plane {plane.id}') self.run(1) if self.flips == 0: diff --git a/tests/kms-test-brxalloc.py b/tests/kms-test-brxalloc.py index af6dd49..7170ee6 100755 --- a/tests/kms-test-brxalloc.py +++ b/tests/kms-test-brxalloc.py @@ -38,12 +38,11 @@ class BRxAllocTest(kmstest.KMSTest): # Verify that the two CRTCs share the same planes planes = outputs[0].crtc.possible_planes if planes != outputs[1].crtc.possible_planes: - self.skip('Planes differ for CRTCs %u and %u' % \ - (outputs[0].crtc.id, outputs[1].crtc.id)) + self.skip(f'Planes differ for CRTCs {outputs[0].crtc.id} and {outputs[1].crtc.id}') return - self.logger.log('Found %u planes for CRTCs %u and %u' % \ - (len(planes), outputs[0].crtc.id, outputs[1].crtc.id)) + self.logger.log(f'Found {len(planes)} planes for CRTCs {outputs[0].crtc.id} ' + f'and {outputs[1].crtc.id}') # Get one connector for each CRTC for connector in self.output_connectors(): @@ -58,12 +57,12 @@ class BRxAllocTest(kmstest.KMSTest): outputs[1].connector = connector if not outputs[0].connector or not outputs[1].connector: - self.skip('No connected connectors for CRTCs %u and %u ' % \ - (outputs[0].crtc.id, outputs[1].crtc.id)) + self.skip(f'No connected connectors for CRTCs {outputs[0].crtc.id} ' + f'and {outputs[1].crtc.id}') return - self.start('Moving %u planes from %s to %s' % \ - (len(planes), outputs[0].connector.fullname, outputs[1].connector.fullname)) + self.start(f'Moving {len(planes)} planes from {outputs[0].connector.fullname} ' + f'to {outputs[0].connector.fullname}') # Set the initial mode for both outputs and wait 5s for the monitors to # wake up. @@ -76,8 +75,7 @@ class BRxAllocTest(kmstest.KMSTest): # Set the mode with no plane ret = self.atomic_crtc_mode_set(output.crtc, output.connector, mode, sync=True) if ret < 0: - self.fail('atomic mode set on %s failed with %d' % \ - (output.connector.fullname, ret)) + self.fail(f'atomic mode set on {output.connector.fullname} failed with {ret}') return self.logger.log('Initial atomic mode set completed') @@ -88,13 +86,13 @@ class BRxAllocTest(kmstest.KMSTest): output = outputs[0] for plane in planes: - self.logger.log('Adding plane %u to %s' % (plane.id, output.connector.fullname)) + self.logger.log(f'Adding plane {plane.id} to {output.connector.fullname}') source = kmstest.Rect(0, 0, output.fb.width, output.fb.height) destination = kmstest.Rect(offset, offset, output.fb.width, output.fb.height) ret = self.atomic_plane_set(plane, output.crtc, source, destination, output.fb, sync=True) if ret < 0: - self.fail('atomic plane set failed with %d' % ret) + self.fail(f'atomic plane set failed with {ret}') return offset += 50 @@ -106,20 +104,20 @@ class BRxAllocTest(kmstest.KMSTest): output = outputs[1] for plane in planes: - self.logger.log('Moving plane %u to %s' % (plane.id, output.connector.fullname)) + self.logger.log(f'Moving plane {plane.id} to {output.connector.fullname}') # Switching CRTC directly is not supported by DRM, start by # disabling the plane. ret = self.atomic_plane_disable(plane) if ret < 0: - self.fail('atomic plane disable failed with %d' % ret) + self.fail(f'atomic plane disable failed with {ret}') return source = kmstest.Rect(0, 0, output.fb.width, output.fb.height) destination = kmstest.Rect(offset, offset, output.fb.width, output.fb.height) ret = self.atomic_plane_set(plane, output.crtc, source, destination, output.fb) if ret < 0: - self.fail('atomic plane set failed with %d' % ret) + self.fail(f'atomic plane set failed with {ret}') return self.run(1) diff --git a/tests/kms-test-connectors.py b/tests/kms-test-connectors.py index 54cc89f..d2ca636 100755 --- a/tests/kms-test-connectors.py +++ b/tests/kms-test-connectors.py @@ -10,7 +10,7 @@ class ConnectorsTest(kmstest.KMSTest): def main(self): for connector in self.card.connectors: - self.start('connector %s' % connector.fullname) + self.start(f'connector {connector.fullname}') # Every connector should have at least one suitable CRTC crtcs = connector.get_possible_crtcs() diff --git a/tests/kms-test-crc.py b/tests/kms-test-crc.py index 5b8a679..efb3cf0 100755 --- a/tests/kms-test-crc.py +++ b/tests/kms-test-crc.py @@ -121,7 +121,7 @@ class CRCTest(kmstest.KMSTest): connectors[crtc] = connector for crtc in self.card.crtcs: - self.start('CRC calculation on CRTC %u' % crtc.id) + self.start(f'CRC calculation on CRTC {crtc.id}') # Get the connector and default mode try: @@ -141,8 +141,8 @@ class CRCTest(kmstest.KMSTest): self.skip('no plane available for CRTC') continue - self.logger.log('Testing connector %s, CRTC %u, mode %s with %u planes' % \ - (connector.fullname, crtc.id, mode.name, len(planes))) + self.logger.log(f'Testing connector {connector.fullname}, CRTC {crtc.id}, ' + f'mode {mode.name} with {len(planes)} planes') # Create a frame buffer and draw a test pattern. fb = pykms.DumbFramebuffer(self.card, mode.hdisplay, mode.vdisplay, 'XR24') @@ -154,7 +154,7 @@ class CRCTest(kmstest.KMSTest): # Set the mode and add all planes ret = self.atomic_crtc_mode_set(crtc, connector, mode, sync=True) if ret < 0: - self.fail('atomic mode set failed with %d' % ret) + self.fail(f'atomic mode set failed with {ret}') continue req = kmstest.AtomicRequest(self) @@ -177,7 +177,7 @@ class CRCTest(kmstest.KMSTest): ret = req.commit(0) if ret < 0: - self.fail('atomic plane set failed with %d' % ret) + self.fail(f'atomic plane set failed with {ret}') continue # Wait for one second and make sure the page flip has completed. @@ -191,9 +191,9 @@ class CRCTest(kmstest.KMSTest): if source == crtc: crc_source = 'auto' else: - crc_source = 'plane%u' % source.id + crc_source = f'plane{source.id}' - self.logger.log('Computing CRC from source %s' % crc_source) + self.logger.log(f'Computing CRC from source {crc_source}') # Set the CRC source and acquire 10 CRC values. Discard the # first value, as the device is running and the new source @@ -204,7 +204,7 @@ class CRCTest(kmstest.KMSTest): crc_reader.stop() crcs = [c.crcs[0] for c in crcs[1:]] - self.logger.log('CRC value[0] 0x%08x' % crcs[0]) + self.logger.log(f'CRC value[0] 0x{crcs[0]:08x}') failures = 0 ref_crc = composer.crc(source) @@ -212,12 +212,11 @@ class CRCTest(kmstest.KMSTest): for i in range(len(crcs)): crc = crcs[i] if crc != ref_crc: - self.logger.log('CRC value[%u] 0x%08x does not match reference 0x%08x' - % (i, crc, ref_crc)) + self.logger.log(f'CRC value[{i}] 0x{crc:08x} does not match reference 0x{ref_crc:08x}') failures += 1 if failures: - self.fail('Incorrect CRC values on source %s' % crc_source) + self.fail(f'Incorrect CRC values on source {crc_source}') break else: diff --git a/tests/kms-test-formats.py b/tests/kms-test-formats.py index ce84943..5c3bfd4 100755 --- a/tests/kms-test-formats.py +++ b/tests/kms-test-formats.py @@ -37,8 +37,8 @@ class FormatsTest(kmstest.KMSTest): self.skip('no CRTC available with connector') return - self.logger.log('Testing connector %s, CRTC %u, mode %s' % \ - (connector.fullname, crtc.id, mode.name)) + self.logger.log(f'Testing connector {connector.fullname}, ' + f'CRTC {crtc.id}, mode {mode.name}') failed = 0 @@ -46,7 +46,7 @@ class FormatsTest(kmstest.KMSTest): for i in range(num_formats): format = crtc.primary_plane.formats[i] - self.logger.log('Testing format %s' % format) + self.logger.log(f'Testing format {format}') self.progress(i+1, num_formats) # Create a frame buffer @@ -62,7 +62,7 @@ class FormatsTest(kmstest.KMSTest): # Set the mode with a primary plane ret = self.atomic_crtc_mode_set(crtc, connector, mode, fb) if ret < 0: - self.logger.log('atomic mode set failed with %d' % ret) + self.logger.log(f'atomic mode set failed with {ret}') failed += 1 continue @@ -71,7 +71,7 @@ class FormatsTest(kmstest.KMSTest): self.atomic_crtc_disable(crtc) if failed: - self.fail('%s/%s formats failed' % (failed, num_formats)) + self.fail(f'{failed}/{num_formats} formats failed') else: self.success() diff --git a/tests/kms-test-legacy-modeset.py b/tests/kms-test-legacy-modeset.py index f856178..06ecead 100755 --- a/tests/kms-test-legacy-modeset.py +++ b/tests/kms-test-legacy-modeset.py @@ -13,7 +13,7 @@ class LegacyModeSetTest(kmstest.KMSTest): def main(self): for connector in self.output_connectors(): - self.start('legacy mode set on connector %s' % connector.fullname) + self.start(f'legacy mode set on connector {connector.fullname}') # Skip disconnected connectors if not connector.connected(): @@ -36,8 +36,8 @@ class LegacyModeSetTest(kmstest.KMSTest): self.skip('no mode available') continue - self.logger.log('Testing connector %s on CRTC %u with mode %s' % \ - (connector.fullname, crtc.id, mode.name)) + self.logger.log(f'Testing connector {connector.fullname} ' + f'on CRTC {crtc.id} with mode {mode.name}') # Create a frame buffer fb = pykms.DumbFramebuffer(self.card, mode.hdisplay, mode.vdisplay, 'XR24') @@ -46,7 +46,7 @@ class LegacyModeSetTest(kmstest.KMSTest): # Perform a mode set ret = crtc.set_mode(connector, fb, mode) if ret < 0: - self.fail('legacy mode set failed with %d' % ret) + self.fail(f'legacy mode set failed with {ret}') continue self.logger.log('Legacy mode set complete') @@ -54,7 +54,7 @@ class LegacyModeSetTest(kmstest.KMSTest): ret = crtc.disable_mode() if ret < 0: - self.fail('legacy mode set disable failed with %d' % ret) + self.fail(f'legacy mode set disable failed with {ret}') continue self.success() diff --git a/tests/kms-test-modes.py b/tests/kms-test-modes.py index 433bb0b..c478489 100755 --- a/tests/kms-test-modes.py +++ b/tests/kms-test-modes.py @@ -12,8 +12,8 @@ class ModesTest(kmstest.KMSTest): self.logger.log('Page flip complete') def test_mode(self, connector, crtc, mode): - self.logger.log('Testing connector %s on CRTC %u with mode %s' % \ - (connector.fullname, crtc.id, mode.name)) + self.logger.log(f'Testing connector {connector.fullname} ' + f'on CRTC {crtc.id} with mode {mode.name}') # Create a frame buffer fb = pykms.DumbFramebuffer(self.card, mode.hdisplay, mode.vdisplay, 'XR24') @@ -22,7 +22,7 @@ class ModesTest(kmstest.KMSTest): # Perform the mode set ret = self.atomic_crtc_mode_set(crtc, connector, mode, fb) if ret < 0: - raise RuntimeError('atomic mode set failed with %d' % ret) + raise RuntimeError(f'atomic mode set failed with {ret}') self.logger.log('Atomic mode set complete') self.run(4) @@ -33,7 +33,7 @@ class ModesTest(kmstest.KMSTest): def main(self): for connector in self.output_connectors(): - self.start('modes on connector %s' % connector.fullname) + self.start(f'modes on connector {connector.fullname}') # Skip disconnected connectors if not connector.connected(): diff --git a/tests/kms-test-modeset.py b/tests/kms-test-modeset.py index a6ba61c..e8b3d9a 100755 --- a/tests/kms-test-modeset.py +++ b/tests/kms-test-modeset.py @@ -13,7 +13,7 @@ class ModeSetTest(kmstest.KMSTest): def main(self): for connector in self.output_connectors(): - self.start('atomic mode set on connector %s' % connector.fullname) + self.start(f'atomic mode set on connector {connector.fullname}') # Skip disconnected connectors if not connector.connected(): @@ -36,8 +36,8 @@ class ModeSetTest(kmstest.KMSTest): self.skip('no mode available') continue - self.logger.log('Testing connector %s on CRTC %u with mode %s' % \ - (connector.fullname, crtc.id, mode.name)) + self.logger.log(f'Testing connector {connector.fullname} ' + f'on CRTC {crtc.id} with mode {mode.name}') # Create a frame buffer fb = pykms.DumbFramebuffer(self.card, mode.hdisplay, mode.vdisplay, 'XR24') @@ -46,7 +46,7 @@ class ModeSetTest(kmstest.KMSTest): # Perform a mode set ret = self.atomic_crtc_mode_set(crtc, connector, mode, fb) if ret < 0: - self.fail('atomic mode set failed with %d' % ret) + self.fail(f'atomic mode set failed with {ret}') continue self.logger.log('Atomic mode set complete') diff --git a/tests/kms-test-pageflip.py b/tests/kms-test-pageflip.py index 15dae6a..14bea0a 100755 --- a/tests/kms-test-pageflip.py +++ b/tests/kms-test-pageflip.py @@ -13,12 +13,12 @@ class PageFlipTest(kmstest.KMSTest): def handle_page_flip(self, frame, time): if self.flips == 1: - self.logger.log('first page flip frame %u time %f' % (frame, time)) + self.logger.log(f'first page flip frame {frame} time {time}') self.frame_start = frame self.time_start = time if self.stop_requested: - self.logger.log('last page flip frame %u time %f' % (frame, time)) + self.logger.log(f'last page flip frame {frame} time {time}') self.frame_end = frame self.time_end = time self.loop.stop() @@ -43,7 +43,7 @@ class PageFlipTest(kmstest.KMSTest): def main(self): for connector in self.output_connectors(): - self.start('page flip on connector %s' % connector.fullname) + self.start(f'page flip on connector {connector.fullname}') # Skip disconnected connectors if not connector.connected(): @@ -67,7 +67,7 @@ class PageFlipTest(kmstest.KMSTest): self.plane = plane break else: - self.skip('no plane available for CRTC %u' % crtc.id) + self.skip(f'no plane available for CRTC {crtc.id}') continue # Get the default mode for the connector @@ -77,8 +77,8 @@ class PageFlipTest(kmstest.KMSTest): self.skip('no mode available') continue - self.logger.log('Testing connector %s, CRTC %u, plane %u, mode %s' % \ - (connector.fullname, crtc.id, self.plane.id, mode.name)) + self.logger.log(f'Testing connector {connector.fullname}, CRTC {crtc.id}, ' + f'plane {self.plane.id}, mode {mode.name}') # Create two frame buffers self.fbs = [] @@ -88,7 +88,7 @@ class PageFlipTest(kmstest.KMSTest): # Set the mode and perform the initial page flip ret = self.atomic_crtc_mode_set(crtc, connector, mode, self.fbs[0]) if ret < 0: - self.fail('atomic mode set failed with %d' % ret) + self.fail(f'atomic mode set failed with {ret}') continue # Flip pages for 10s @@ -114,8 +114,8 @@ class PageFlipTest(kmstest.KMSTest): frames = self.frame_end - self.frame_start + 1 interval = self.time_end - self.time_start - self.logger.log('Frame rate: %f (%u/%u frames in %f s)' % \ - (frames / interval, self.flips, frames, interval)) + self.logger.log(f'Frame rate: {frames / interval} ' + f'({self.flips}/{frames} frames in {interval} s)') self.success() PageFlipTest().execute() diff --git a/tests/kms-test-planeposition.py b/tests/kms-test-planeposition.py index e843ae1..aceb849 100755 --- a/tests/kms-test-planeposition.py +++ b/tests/kms-test-planeposition.py @@ -42,8 +42,8 @@ class PlanePositionTest(kmstest.KMSTest): self.skip('no CRTC available with connector and at least two planes') return - self.logger.log('Testing connector %s, CRTC %u, mode %s with %u planes' % \ - (connector.fullname, crtc.id, mode.name, len(planes))) + self.logger.log(f'Testing connector {connector.fullname}, CRTC {crtc.id}, ' + f'mode {mode.name} with {len(planes)} planes') # Create a frame buffer fb = pykms.DumbFramebuffer(self.card, mode.hdisplay, mode.vdisplay, 'XR24') @@ -52,7 +52,7 @@ class PlanePositionTest(kmstest.KMSTest): # Set the mode with no plane, wait 5s for the monitor to wake up ret = self.atomic_crtc_mode_set(crtc, connector, mode, sync=True) if ret < 0: - self.fail('atomic mode set failed with %d' % ret) + self.fail(f'atomic mode set failed with {ret}') return self.logger.log('Initial atomic mode set completed') @@ -63,7 +63,7 @@ class PlanePositionTest(kmstest.KMSTest): destination = kmstest.Rect(0, 0, fb.width // 2, fb.height) ret = self.atomic_plane_set(planes[0], crtc, source, destination, fb, sync=True) if ret < 0: - self.fail('atomic plane set for first plane failed with %d' % ret) + self.fail(f'atomic plane set for first plane failed with {ret}') return self.logger.log('Root plane enabled') @@ -79,10 +79,10 @@ class PlanePositionTest(kmstest.KMSTest): ret = self.atomic_plane_set(planes[1], crtc, source, destination, fb, sync=True) if ret < 0: - self.fail('atomic plane set with offset %d,%d' % offset) + self.fail(f'atomic plane set with offset {offset}') return - self.logger.log('Moved overlay plane to %d,%d' % offset) + self.logger.log(f'Moved overlay plane to {offset}') time.sleep(3) # Try to move the plane completely off-screen. The device is expected @@ -97,10 +97,10 @@ class PlanePositionTest(kmstest.KMSTest): ret = self.atomic_plane_set(planes[1], crtc, source, destination, fb, sync=True) if ret < 0: - self.fail('atomic plane set with offset %d,%d' % offset) + self.fail(f'atomic plane set with offset {offset}') return - self.logger.log('Moved overlay plane to %d,%d' % offset) + self.logger.log(f'Moved overlay plane to {offset}') time.sleep(3) # Disable and re-enable the plane when it is off-screen. The device is diff --git a/tests/kms-test-routing.py b/tests/kms-test-routing.py index 69f8be1..68aff9c 100755 --- a/tests/kms-test-routing.py +++ b/tests/kms-test-routing.py @@ -64,10 +64,10 @@ class RoutingTest(kmstest.KMSTest): fb = pykms.DumbFramebuffer(self.card, max_hdisplay, max_vdisplay, 'XR24') pykms.draw_test_pattern(fb) - self.start('Moving connector %s between CRTCs %s' % \ - (shared_connector.fullname, [pipe.crtc.id for pipe in pipes])) + self.start(f'Moving connector {shared_connector.fullname} ' + f'between CRTCs {[pipe.crtc.id for pipe in pipes]}') - self.logger.log('Highest display resolution: %ux%u' % (max_hdisplay, max_vdisplay)) + self.logger.log(f'Highest display resolution: {max_hdisplay}x{max_vdisplay}') for master_pipe in pipes: req = kmstest.AtomicRequest(self) @@ -97,13 +97,13 @@ class RoutingTest(kmstest.KMSTest): 'CRTC_H': mode.vdisplay, }) - route.append('CRTC %u to connector %s' % (pipe.crtc.id, pipe.connector.fullname)) + route.append(f'CRTC {pipe.crtc.id} to connector {pipe.connector.fullname}') self.logger.log('Routing ' + ', '.join(route)) ret = req.commit_sync(True) if ret < 0: - self.fail('atomic commit failed with %d' % ret) + self.fail(f'atomic commit failed with {ret}') return time.sleep(5) diff --git a/tests/kmstest.py b/tests/kmstest.py index 708e699..14e28cd 100755 --- a/tests/kmstest.py +++ b/tests/kmstest.py @@ -113,7 +113,7 @@ class KernelLogReader(object): class Logger(object): def __init__(self, name): - self.logfile = open('%s.log' % name, 'w') + self.logfile = open(f'{name}.log', 'w') self._kmsg = KernelLogReader() def __del__(self): @@ -129,7 +129,7 @@ class Logger(object): def event(self): kmsgs = self._kmsg.read() for msg in kmsgs: - self.logfile.write('K [%6f] %s\n' % (msg.timestamp, msg.msg)) + self.logfile.write(f'K [{msg.timestamp:6f} {msg.msg}\n') self.logfile.flush() @property @@ -146,7 +146,7 @@ class Logger(object): self.event() now = time.clock_gettime(time.CLOCK_MONOTONIC) - self.logfile.write('U [%6f] %s\n' % (now, msg)) + self.logfile.write(f'U [{now:6f}] {msg}\n') self.logfile.flush() @@ -171,7 +171,7 @@ class CRCReader(object): # Hardcode the device minor to 0 as the KMSTest constructor opens the # default card object. - self.dir = os.open('/sys/kernel/debug/dri/0/crtc-%u/crc' % self.pipe, 0) + self.dir = os.open('f/sys/kernel/debug/dri/0/crtc-{self.pipe}/crc', 0) self.ctrl = os.open('control', os.O_WRONLY, dir_fd = self.dir) self.data = -1 @@ -211,7 +211,7 @@ class Dist(object): self.y = y def __repr__(self): - return '(%d,%d)' % (self.x, self.y) + return f'({self.x},{self.y})' class Point(object): @@ -220,7 +220,7 @@ class Point(object): self.y = y def __repr__(self): - return '(%d,%d)' % (self.x, self.y) + return f'({self.x},{self.y})' def move(self, distance): self.x += distance.x @@ -233,7 +233,7 @@ class Size(object): self.height = height def __repr__(self): - return '%ux%u' % (self.width, self.height) + return f'{self.width}x{self.height}' class Rect(object): @@ -244,7 +244,7 @@ class Rect(object): self.height = height def __repr__(self): - return '(%d,%d)/%ux%u' % (self.left, self.top, self.width, self.height) + return f'({self.left},{self.top})/{self.width}x{self.height}' def isEmpty(self): """Check if the rectangle has a zero width or height""" @@ -462,24 +462,24 @@ class KMSTest(object): def start(self, name): """Start a test.""" self.test_name = name - self.logger.log('Testing %s' % name) - sys.stdout.write('Testing %s: ' % name) + self.logger.log(f'Testing {name}') + sys.stdout.write(f'Testing {name}: ') sys.stdout.flush() def progress(self, current, maximum): - sys.stdout.write('\rTesting %s: %u/%u' % (self.test_name, current, maximum)) + sys.stdout.write(f'\rTesting {self.test_name}: {current}/{maximum}') sys.stdout.flush() def fail(self, reason): """Complete a test with failure.""" - self.logger.log('Test failed. Reason: %s' % reason) + self.logger.log(f'Test failed. Reason: {reason}') self.logger.flush() - sys.stdout.write('\rTesting %s: FAIL\n' % self.test_name) + sys.stdout.write(f'\rTesting {self.test_name}: FAIL\n') sys.stdout.flush() def skip(self, reason): """Complete a test with skip.""" - self.logger.log('Test skipped. Reason: %s' % reason) + self.logger.log(f'Test skipped. Reason: {reason}') self.logger.flush() sys.stdout.write('SKIP\n') sys.stdout.flush() @@ -488,6 +488,6 @@ class KMSTest(object): """Complete a test with success.""" self.logger.log('Test completed successfully') self.logger.flush() - sys.stdout.write('\rTesting %s: SUCCESS\n' % self.test_name) + sys.stdout.write(f'\rTesting {self.test_name}: SUCCESS\n') sys.stdout.flush() -- cgit v1.2.3