diff options
| -rwxr-xr-x | tests/kms-test-allplanes.py | 20 | ||||
| -rwxr-xr-x | tests/kms-test-brxalloc.py | 30 | ||||
| -rwxr-xr-x | tests/kms-test-connectors.py | 6 | ||||
| -rwxr-xr-x | tests/kms-test-crc.py | 30 | ||||
| -rwxr-xr-x | tests/kms-test-formats.py | 16 | ||||
| -rwxr-xr-x | tests/kms-test-legacy-modeset.py | 18 | ||||
| -rwxr-xr-x | tests/kms-test-modes.py | 18 | ||||
| -rwxr-xr-x | tests/kms-test-modeset.py | 18 | ||||
| -rwxr-xr-x | tests/kms-test-pageflip.py | 24 | ||||
| -rwxr-xr-x | tests/kms-test-planeposition.py | 30 | ||||
| -rwxr-xr-x | tests/kms-test-routing.py | 14 | ||||
| -rwxr-xr-x | tests/kmstest.py | 60 |
12 files changed, 142 insertions, 142 deletions
diff --git a/tests/kms-test-allplanes.py b/tests/kms-test-allplanes.py index d883262..710ae66 100755 --- a/tests/kms-test-allplanes.py +++ b/tests/kms-test-allplanes.py @@ -9,7 +9,7 @@ class AllPlanesTest(kmstest.KMSTest): """Test composition with all planes enabled on all CRTCs.""" def handle_page_flip(self, frame, time): - self.logger.log("Page flip complete") + self.logger.log('Page flip complete') def main(self): # Create the connectors to CRTCs map @@ -25,14 +25,14 @@ class AllPlanesTest(kmstest.KMSTest): connectors[crtc] = connector for crtc in self.card.crtcs: - self.start("composition on CRTC %u" % crtc.id) + self.start('composition on CRTC %u' % crtc.id) # Get the connector and default mode try: connector = connectors[crtc]; mode = connector.get_default_mode() except KeyError: - self.skip("no connector or mode available") + self.skip('no connector or mode available') continue # List planes available for the CRTC @@ -42,20 +42,20 @@ class AllPlanesTest(kmstest.KMSTest): planes.append(plane) if len(planes) == 0: - self.skip("no plane available for CRTC") + self.skip('no plane available for CRTC') continue - self.logger.log("Testing connector %s, CRTC %u, mode %s with %u planes" % \ + self.logger.log('Testing connector %s, CRTC %u, mode %s with %u planes' % \ (connector.fullname, crtc.id, mode.name, len(planes))) # Create a frame buffer - fb = pykms.DumbFramebuffer(self.card, mode.hdisplay, mode.vdisplay, "XR24") + fb = pykms.DumbFramebuffer(self.card, mode.hdisplay, mode.vdisplay, 'XR24') pykms.draw_test_pattern(fb) # Set the mode with a primary plane ret = self.atomic_crtc_mode_set(crtc, connector, mode, fb) if ret < 0: - self.fail("atomic mode set failed with %d" % ret) + self.fail('atomic mode set failed with %d' % ret) continue self.run(3) @@ -67,14 +67,14 @@ class AllPlanesTest(kmstest.KMSTest): destination = kmstest.Rect(offset, offset, fb.width, fb.height) ret = self.atomic_plane_set(plane, crtc, source, destination, fb) if ret < 0: - self.fail("atomic plane set failed with %d" % ret) + self.fail('atomic plane set failed with %d' % ret) break - self.logger.log("Adding plane %u" % plane.id) + self.logger.log('Adding plane %u' % plane.id) self.run(1) if self.flips == 0: - self.fail("No page flip registered") + self.fail('No page flip registered') break offset += 50 diff --git a/tests/kms-test-brxalloc.py b/tests/kms-test-brxalloc.py index dbdc789..af6dd49 100755 --- a/tests/kms-test-brxalloc.py +++ b/tests/kms-test-brxalloc.py @@ -21,9 +21,9 @@ class BRxAllocTest(kmstest.KMSTest): # instance to test dynamic assignment of the BRU and BRS to pipelines. # This is only occurs on H3 ES2.0 and M3-N. Check the SoC model through # sysfs as we can't detected it through the DRM/KMS API. - soc = open("/sys/devices/soc0/soc_id", "rb").read().strip().decode() - if soc not in ["r8a7795", "r8a77965"]: - self.skip("VSPDL (BRU+BRS) not available") + soc = open('/sys/devices/soc0/soc_id', 'rb').read().strip().decode() + if soc not in ['r8a7795', 'r8a77965']: + self.skip('VSPDL (BRU+BRS) not available') return outputs = [Output(), Output()] @@ -38,11 +38,11 @@ class BRxAllocTest(kmstest.KMSTest): # Verify that the two CRTCs share the same planes planes = outputs[0].crtc.possible_planes if planes != outputs[1].crtc.possible_planes: - self.skip("Planes differ for CRTCs %u and %u" % \ + self.skip('Planes differ for CRTCs %u and %u' % \ (outputs[0].crtc.id, outputs[1].crtc.id)) return - self.logger.log("Found %u planes for CRTCs %u and %u" % \ + self.logger.log('Found %u planes for CRTCs %u and %u' % \ (len(planes), outputs[0].crtc.id, outputs[1].crtc.id)) # Get one connector for each CRTC @@ -58,11 +58,11 @@ class BRxAllocTest(kmstest.KMSTest): outputs[1].connector = connector if not outputs[0].connector or not outputs[1].connector: - self.skip("No connected connectors for CRTCs %u and %u " % \ + self.skip('No connected connectors for CRTCs %u and %u ' % \ (outputs[0].crtc.id, outputs[1].crtc.id)) return - self.start("Moving %u planes from %s to %s" % \ + self.start('Moving %u planes from %s to %s' % \ (len(planes), outputs[0].connector.fullname, outputs[1].connector.fullname)) # Set the initial mode for both outputs and wait 5s for the monitors to @@ -70,17 +70,17 @@ class BRxAllocTest(kmstest.KMSTest): for output in outputs: # Get the default mode and create a framebuffer mode = output.connector.get_default_mode() - output.fb = pykms.DumbFramebuffer(self.card, mode.hdisplay, mode.vdisplay, "XR24") + output.fb = pykms.DumbFramebuffer(self.card, mode.hdisplay, mode.vdisplay, 'XR24') pykms.draw_test_pattern(output.fb) # Set the mode with no plane ret = self.atomic_crtc_mode_set(output.crtc, output.connector, mode, sync=True) if ret < 0: - self.fail("atomic mode set on %s failed with %d" % \ + self.fail('atomic mode set on %s failed with %d' % \ (output.connector.fullname, ret)) return - self.logger.log("Initial atomic mode set completed") + self.logger.log('Initial atomic mode set completed') time.sleep(5) # Add all planes @@ -88,13 +88,13 @@ class BRxAllocTest(kmstest.KMSTest): output = outputs[0] for plane in planes: - self.logger.log("Adding plane %u to %s" % (plane.id, output.connector.fullname)) + self.logger.log('Adding plane %u to %s' % (plane.id, output.connector.fullname)) source = kmstest.Rect(0, 0, output.fb.width, output.fb.height) destination = kmstest.Rect(offset, offset, output.fb.width, output.fb.height) ret = self.atomic_plane_set(plane, output.crtc, source, destination, output.fb, sync=True) if ret < 0: - self.fail("atomic plane set failed with %d" % ret) + self.fail('atomic plane set failed with %d' % ret) return offset += 50 @@ -106,20 +106,20 @@ class BRxAllocTest(kmstest.KMSTest): output = outputs[1] for plane in planes: - self.logger.log("Moving plane %u to %s" % (plane.id, output.connector.fullname)) + self.logger.log('Moving plane %u to %s' % (plane.id, output.connector.fullname)) # Switching CRTC directly is not supported by DRM, start by # disabling the plane. ret = self.atomic_plane_disable(plane) if ret < 0: - self.fail("atomic plane disable failed with %d" % ret) + self.fail('atomic plane disable failed with %d' % ret) return source = kmstest.Rect(0, 0, output.fb.width, output.fb.height) destination = kmstest.Rect(offset, offset, output.fb.width, output.fb.height) ret = self.atomic_plane_set(plane, output.crtc, source, destination, output.fb) if ret < 0: - self.fail("atomic plane set failed with %d" % ret) + self.fail('atomic plane set failed with %d' % ret) return self.run(1) diff --git a/tests/kms-test-connectors.py b/tests/kms-test-connectors.py index 4c58b99..54cc89f 100755 --- a/tests/kms-test-connectors.py +++ b/tests/kms-test-connectors.py @@ -10,19 +10,19 @@ class ConnectorsTest(kmstest.KMSTest): def main(self): for connector in self.card.connectors: - self.start("connector %s" % connector.fullname) + self.start('connector %s' % connector.fullname) # Every connector should have at least one suitable CRTC crtcs = connector.get_possible_crtcs() if len(crtcs) == 0: - self.fail("no possible CRTC") + self.fail('no possible CRTC') continue # Connected connectors should have at least one mode if connector.connected(): modes = connector.get_modes() if len(modes) == 0: - self.fail("no mode available") + self.fail('no mode available') continue self.success() diff --git a/tests/kms-test-crc.py b/tests/kms-test-crc.py index 60187ef..5b8a679 100755 --- a/tests/kms-test-crc.py +++ b/tests/kms-test-crc.py @@ -105,7 +105,7 @@ class CRCTest(kmstest.KMSTest): """Test CRC calculation on pipeline output.""" def handle_page_flip(self, frame, time): - self.logger.log("Page flip complete") + self.logger.log('Page flip complete') def main(self): # Create the connectors to CRTCs map @@ -121,14 +121,14 @@ class CRCTest(kmstest.KMSTest): connectors[crtc] = connector for crtc in self.card.crtcs: - self.start("CRC calculation on CRTC %u" % crtc.id) + self.start('CRC calculation on CRTC %u' % crtc.id) # Get the connector and default mode try: connector = connectors[crtc]; mode = connector.get_default_mode() except KeyError: - self.skip("no connector or mode available") + self.skip('no connector or mode available') continue # List planes available for the CRTC @@ -138,14 +138,14 @@ class CRCTest(kmstest.KMSTest): planes.append(plane) if len(planes) == 0: - self.skip("no plane available for CRTC") + self.skip('no plane available for CRTC') continue - self.logger.log("Testing connector %s, CRTC %u, mode %s with %u planes" % \ + self.logger.log('Testing connector %s, CRTC %u, mode %s with %u planes' % \ (connector.fullname, crtc.id, mode.name, len(planes))) # Create a frame buffer and draw a test pattern. - fb = pykms.DumbFramebuffer(self.card, mode.hdisplay, mode.vdisplay, "XR24") + fb = pykms.DumbFramebuffer(self.card, mode.hdisplay, mode.vdisplay, 'XR24') pykms.draw_test_pattern(fb) # Create a composer. This will compute the reference CRCs. @@ -154,7 +154,7 @@ class CRCTest(kmstest.KMSTest): # Set the mode and add all planes ret = self.atomic_crtc_mode_set(crtc, connector, mode, sync=True) if ret < 0: - self.fail("atomic mode set failed with %d" % ret) + self.fail('atomic mode set failed with %d' % ret) continue req = kmstest.AtomicRequest(self) @@ -177,23 +177,23 @@ class CRCTest(kmstest.KMSTest): ret = req.commit(0) if ret < 0: - self.fail("atomic plane set failed with %d" % ret) + self.fail('atomic plane set failed with %d' % ret) continue # Wait for one second and make sure the page flip has completed. self.run(1) if self.flips == 0: - self.fail("No page flip registered") + self.fail('No page flip registered') continue sources = [crtc] + planes for source in sources: if source == crtc: - crc_source = "auto" + crc_source = 'auto' else: - crc_source = "plane%u" % source.id + crc_source = 'plane%u' % source.id - self.logger.log("Computing CRC from source %s" % crc_source) + self.logger.log('Computing CRC from source %s' % crc_source) # Set the CRC source and acquire 10 CRC values. Discard the # first value, as the device is running and the new source @@ -204,7 +204,7 @@ class CRCTest(kmstest.KMSTest): crc_reader.stop() crcs = [c.crcs[0] for c in crcs[1:]] - self.logger.log("CRC value[0] 0x%08x" % crcs[0]) + self.logger.log('CRC value[0] 0x%08x' % crcs[0]) failures = 0 ref_crc = composer.crc(source) @@ -212,12 +212,12 @@ class CRCTest(kmstest.KMSTest): for i in range(len(crcs)): crc = crcs[i] if crc != ref_crc: - self.logger.log("CRC value[%u] 0x%08x does not match reference 0x%08x" + self.logger.log('CRC value[%u] 0x%08x does not match reference 0x%08x' % (i, crc, ref_crc)) failures += 1 if failures: - self.fail("Incorrect CRC values on source %s" % crc_source) + self.fail('Incorrect CRC values on source %s' % crc_source) break else: diff --git a/tests/kms-test-formats.py b/tests/kms-test-formats.py index 86f1651..ce84943 100755 --- a/tests/kms-test-formats.py +++ b/tests/kms-test-formats.py @@ -10,12 +10,12 @@ class FormatsTest(kmstest.KMSTest): """Test all available plane formats.""" def main(self): - self.start("plane formats") + self.start('plane formats') # Find a CRTC with a connected connector and at least one plane for connector in self.output_connectors(): if not connector.connected(): - self.skip("unconnected connector") + self.skip('unconnected connector') continue try: @@ -34,10 +34,10 @@ class FormatsTest(kmstest.KMSTest): break else: - self.skip("no CRTC available with connector") + self.skip('no CRTC available with connector') return - self.logger.log("Testing connector %s, CRTC %u, mode %s" % \ + self.logger.log('Testing connector %s, CRTC %u, mode %s' % \ (connector.fullname, crtc.id, mode.name)) failed = 0 @@ -46,14 +46,14 @@ class FormatsTest(kmstest.KMSTest): for i in range(num_formats): format = crtc.primary_plane.formats[i] - self.logger.log("Testing format %s" % format) + self.logger.log('Testing format %s' % format) self.progress(i+1, num_formats) # Create a frame buffer try: fb = pykms.DumbFramebuffer(self.card, mode.hdisplay, mode.vdisplay, format) except ValueError: - self.logger.log("Failed to create frame buffer") + self.logger.log('Failed to create frame buffer') failed += 1 continue @@ -62,7 +62,7 @@ class FormatsTest(kmstest.KMSTest): # Set the mode with a primary plane ret = self.atomic_crtc_mode_set(crtc, connector, mode, fb) if ret < 0: - self.logger.log("atomic mode set failed with %d" % ret) + self.logger.log('atomic mode set failed with %d' % ret) failed += 1 continue @@ -71,7 +71,7 @@ class FormatsTest(kmstest.KMSTest): self.atomic_crtc_disable(crtc) if failed: - self.fail("%s/%s formats failed" % (failed, num_formats)) + self.fail('%s/%s formats failed' % (failed, num_formats)) else: self.success() diff --git a/tests/kms-test-legacy-modeset.py b/tests/kms-test-legacy-modeset.py index 4b56053..f856178 100755 --- a/tests/kms-test-legacy-modeset.py +++ b/tests/kms-test-legacy-modeset.py @@ -9,15 +9,15 @@ class LegacyModeSetTest(kmstest.KMSTest): """Test mode setting on all connectors in sequence with the default mode through the legacy mode set API.""" def handle_page_flip(self, frame, time): - self.logger.log("Page flip complete") + self.logger.log('Page flip complete') def main(self): for connector in self.output_connectors(): - self.start("legacy mode set on connector %s" % connector.fullname) + self.start('legacy mode set on connector %s' % connector.fullname) # Skip disconnected connectors if not connector.connected(): - self.skip("unconnected connector") + self.skip('unconnected connector') continue # Find a CRTC suitable for the connector @@ -33,28 +33,28 @@ class LegacyModeSetTest(kmstest.KMSTest): try: mode = connector.get_default_mode() except ValueError: - self.skip("no mode available") + self.skip('no mode available') continue - self.logger.log("Testing connector %s on CRTC %u with mode %s" % \ + self.logger.log('Testing connector %s on CRTC %u with mode %s' % \ (connector.fullname, crtc.id, mode.name)) # Create a frame buffer - fb = pykms.DumbFramebuffer(self.card, mode.hdisplay, mode.vdisplay, "XR24") + fb = pykms.DumbFramebuffer(self.card, mode.hdisplay, mode.vdisplay, 'XR24') pykms.draw_test_pattern(fb) # Perform a mode set ret = crtc.set_mode(connector, fb, mode) if ret < 0: - self.fail("legacy mode set failed with %d" % ret) + self.fail('legacy mode set failed with %d' % ret) continue - self.logger.log("Legacy mode set complete") + self.logger.log('Legacy mode set complete') self.run(5) ret = crtc.disable_mode() if ret < 0: - self.fail("legacy mode set disable failed with %d" % ret) + self.fail('legacy mode set disable failed with %d' % ret) continue self.success() diff --git a/tests/kms-test-modes.py b/tests/kms-test-modes.py index b298a19..433bb0b 100755 --- a/tests/kms-test-modes.py +++ b/tests/kms-test-modes.py @@ -9,35 +9,35 @@ class ModesTest(kmstest.KMSTest): """Test all available modes on all available connectors.""" def handle_page_flip(self, frame, time): - self.logger.log("Page flip complete") + self.logger.log('Page flip complete') def test_mode(self, connector, crtc, mode): - self.logger.log("Testing connector %s on CRTC %u with mode %s" % \ + self.logger.log('Testing connector %s on CRTC %u with mode %s' % \ (connector.fullname, crtc.id, mode.name)) # Create a frame buffer - fb = pykms.DumbFramebuffer(self.card, mode.hdisplay, mode.vdisplay, "XR24") + fb = pykms.DumbFramebuffer(self.card, mode.hdisplay, mode.vdisplay, 'XR24') pykms.draw_test_pattern(fb) # Perform the mode set ret = self.atomic_crtc_mode_set(crtc, connector, mode, fb) if ret < 0: - raise RuntimeError("atomic mode set failed with %d" % ret) + raise RuntimeError('atomic mode set failed with %d' % ret) - self.logger.log("Atomic mode set complete") + self.logger.log('Atomic mode set complete') self.run(4) self.atomic_crtc_disable(crtc) if self.flips == 0: - raise RuntimeError("Page flip not registered") + raise RuntimeError('Page flip not registered') def main(self): for connector in self.output_connectors(): - self.start("modes on connector %s" % connector.fullname) + self.start('modes on connector %s' % connector.fullname) # Skip disconnected connectors if not connector.connected(): - self.skip("unconnected connector") + self.skip('unconnected connector') continue # Find a CRTC suitable for the connector @@ -52,7 +52,7 @@ class ModesTest(kmstest.KMSTest): # Test all available modes modes = connector.get_modes() if len(modes) == 0: - self.skip("no mode available") + self.skip('no mode available') continue for i in range(len(modes)): diff --git a/tests/kms-test-modeset.py b/tests/kms-test-modeset.py index 0dbe67f..a6ba61c 100755 --- a/tests/kms-test-modeset.py +++ b/tests/kms-test-modeset.py @@ -9,15 +9,15 @@ class ModeSetTest(kmstest.KMSTest): """Test mode setting on all connectors in sequence with the default mode.""" def handle_page_flip(self, frame, time): - self.logger.log("Page flip complete") + self.logger.log('Page flip complete') def main(self): for connector in self.output_connectors(): - self.start("atomic mode set on connector %s" % connector.fullname) + self.start('atomic mode set on connector %s' % connector.fullname) # Skip disconnected connectors if not connector.connected(): - self.skip("unconnected connector") + self.skip('unconnected connector') continue # Find a CRTC suitable for the connector @@ -33,28 +33,28 @@ class ModeSetTest(kmstest.KMSTest): try: mode = connector.get_default_mode() except ValueError: - self.skip("no mode available") + self.skip('no mode available') continue - self.logger.log("Testing connector %s on CRTC %u with mode %s" % \ + self.logger.log('Testing connector %s on CRTC %u with mode %s' % \ (connector.fullname, crtc.id, mode.name)) # Create a frame buffer - fb = pykms.DumbFramebuffer(self.card, mode.hdisplay, mode.vdisplay, "XR24") + fb = pykms.DumbFramebuffer(self.card, mode.hdisplay, mode.vdisplay, 'XR24') pykms.draw_test_pattern(fb) # Perform a mode set ret = self.atomic_crtc_mode_set(crtc, connector, mode, fb) if ret < 0: - self.fail("atomic mode set failed with %d" % ret) + self.fail('atomic mode set failed with %d' % ret) continue - self.logger.log("Atomic mode set complete") + self.logger.log('Atomic mode set complete') self.run(5) self.atomic_crtc_disable(crtc) if self.flips == 0: - self.fail("Page flip not registered") + self.fail('Page flip not registered') else: self.success() diff --git a/tests/kms-test-pageflip.py b/tests/kms-test-pageflip.py index 19c3ada..15dae6a 100755 --- a/tests/kms-test-pageflip.py +++ b/tests/kms-test-pageflip.py @@ -13,12 +13,12 @@ class PageFlipTest(kmstest.KMSTest): def handle_page_flip(self, frame, time): if self.flips == 1: - self.logger.log("first page flip frame %u time %f" % (frame, time)) + self.logger.log('first page flip frame %u time %f' % (frame, time)) self.frame_start = frame self.time_start = time if self.stop_requested: - self.logger.log("last page flip frame %u time %f" % (frame, time)) + self.logger.log('last page flip frame %u time %f' % (frame, time)) self.frame_end = frame self.time_end = time self.loop.stop() @@ -43,11 +43,11 @@ class PageFlipTest(kmstest.KMSTest): def main(self): for connector in self.output_connectors(): - self.start("page flip on connector %s" % connector.fullname) + self.start('page flip on connector %s' % connector.fullname) # Skip disconnected connectors if not connector.connected(): - self.skip("unconnected connector") + self.skip('unconnected connector') continue # Find a CRTC suitable for the connector @@ -67,28 +67,28 @@ class PageFlipTest(kmstest.KMSTest): self.plane = plane break else: - self.skip("no plane available for CRTC %u" % crtc.id) + self.skip('no plane available for CRTC %u' % crtc.id) continue # Get the default mode for the connector try: mode = connector.get_default_mode() except ValueError: - self.skip("no mode available") + self.skip('no mode available') continue - self.logger.log("Testing connector %s, CRTC %u, plane %u, mode %s" % \ + self.logger.log('Testing connector %s, CRTC %u, plane %u, mode %s' % \ (connector.fullname, crtc.id, self.plane.id, mode.name)) # Create two frame buffers self.fbs = [] for i in range(2): - self.fbs.append(pykms.DumbFramebuffer(self.card, mode.hdisplay, mode.vdisplay, "XR24")) + self.fbs.append(pykms.DumbFramebuffer(self.card, mode.hdisplay, mode.vdisplay, 'XR24')) # Set the mode and perform the initial page flip ret = self.atomic_crtc_mode_set(crtc, connector, mode, self.fbs[0]) if ret < 0: - self.fail("atomic mode set failed with %d" % ret) + self.fail('atomic mode set failed with %d' % ret) continue # Flip pages for 10s @@ -105,16 +105,16 @@ class PageFlipTest(kmstest.KMSTest): self.atomic_crtc_disable(crtc) if not self.flips: - self.fail("No page flip registered") + self.fail('No page flip registered') continue if self.stop_requested: - self.fail("Last page flip not registered") + self.fail('Last page flip not registered') continue frames = self.frame_end - self.frame_start + 1 interval = self.time_end - self.time_start - self.logger.log("Frame rate: %f (%u/%u frames in %f s)" % \ + self.logger.log('Frame rate: %f (%u/%u frames in %f s)' % \ (frames / interval, self.flips, frames, interval)) self.success() diff --git a/tests/kms-test-planeposition.py b/tests/kms-test-planeposition.py index 0381896..e843ae1 100755 --- a/tests/kms-test-planeposition.py +++ b/tests/kms-test-planeposition.py @@ -10,12 +10,12 @@ class PlanePositionTest(kmstest.KMSTest): """Test boundaries of plane positioning.""" def main(self): - self.start("plane positioning boundaries") + self.start('plane positioning boundaries') # Find a CRTC with a connected connector and at least two planes for connector in self.output_connectors(): if not connector.connected(): - self.skip("unconnected connector") + self.skip('unconnected connector') continue try: @@ -39,23 +39,23 @@ class PlanePositionTest(kmstest.KMSTest): break else: - self.skip("no CRTC available with connector and at least two planes") + self.skip('no CRTC available with connector and at least two planes') return - self.logger.log("Testing connector %s, CRTC %u, mode %s with %u planes" % \ + self.logger.log('Testing connector %s, CRTC %u, mode %s with %u planes' % \ (connector.fullname, crtc.id, mode.name, len(planes))) # Create a frame buffer - fb = pykms.DumbFramebuffer(self.card, mode.hdisplay, mode.vdisplay, "XR24") + fb = pykms.DumbFramebuffer(self.card, mode.hdisplay, mode.vdisplay, 'XR24') pykms.draw_test_pattern(fb) # Set the mode with no plane, wait 5s for the monitor to wake up ret = self.atomic_crtc_mode_set(crtc, connector, mode, sync=True) if ret < 0: - self.fail("atomic mode set failed with %d" % ret) + self.fail('atomic mode set failed with %d' % ret) return - self.logger.log("Initial atomic mode set completed") + self.logger.log('Initial atomic mode set completed') time.sleep(5) # Add the first plane to cover half of the CRTC @@ -63,10 +63,10 @@ class PlanePositionTest(kmstest.KMSTest): destination = kmstest.Rect(0, 0, fb.width // 2, fb.height) ret = self.atomic_plane_set(planes[0], crtc, source, destination, fb, sync=True) if ret < 0: - self.fail("atomic plane set for first plane failed with %d" % ret) + self.fail('atomic plane set for first plane failed with %d' % ret) return - self.logger.log("Root plane enabled") + self.logger.log('Root plane enabled') time.sleep(3) # Add the second plane and move it around to cross all CRTC boundaries @@ -79,10 +79,10 @@ class PlanePositionTest(kmstest.KMSTest): ret = self.atomic_plane_set(planes[1], crtc, source, destination, fb, sync=True) if ret < 0: - self.fail("atomic plane set with offset %d,%d" % offset) + self.fail('atomic plane set with offset %d,%d' % offset) return - self.logger.log("Moved overlay plane to %d,%d" % offset) + self.logger.log('Moved overlay plane to %d,%d' % offset) time.sleep(3) # Try to move the plane completely off-screen. The device is expected @@ -97,17 +97,17 @@ class PlanePositionTest(kmstest.KMSTest): ret = self.atomic_plane_set(planes[1], crtc, source, destination, fb, sync=True) if ret < 0: - self.fail("atomic plane set with offset %d,%d" % offset) + self.fail('atomic plane set with offset %d,%d' % offset) return - self.logger.log("Moved overlay plane to %d,%d" % offset) + self.logger.log('Moved overlay plane to %d,%d' % offset) time.sleep(3) # Disable and re-enable the plane when it is off-screen. The device is # still expected to handle this gracefully. ret = self.atomic_plane_disable(planes[1]) if ret < 0: - self.fail("off-screen atomic plane disable failed") + self.fail('off-screen atomic plane disable failed') return width = fb.width - 100 @@ -117,7 +117,7 @@ class PlanePositionTest(kmstest.KMSTest): ret = self.atomic_plane_set(planes[1], crtc, source, destination, fb, sync=True) if ret < 0: - self.fail("off-scrren atomic plane enable failed") + self.fail('off-scrren atomic plane enable failed') return self.atomic_crtc_disable(crtc) diff --git a/tests/kms-test-routing.py b/tests/kms-test-routing.py index 806adb8..69f8be1 100755 --- a/tests/kms-test-routing.py +++ b/tests/kms-test-routing.py @@ -49,7 +49,7 @@ class RoutingTest(kmstest.KMSTest): break if not shared_connector: - self.skip("No suitable connector") + self.skip('No suitable connector') return # Allocate planes for each CRTC. @@ -61,13 +61,13 @@ class RoutingTest(kmstest.KMSTest): pool = [(elem[0], [p for p in elem[1] if p != pipe.plane]) for elem in pool[:-1]] # Create a framebuffer big enough for all connectors. - fb = pykms.DumbFramebuffer(self.card, max_hdisplay, max_vdisplay, "XR24") + fb = pykms.DumbFramebuffer(self.card, max_hdisplay, max_vdisplay, 'XR24') pykms.draw_test_pattern(fb) - self.start("Moving connector %s between CRTCs %s" % \ + self.start('Moving connector %s between CRTCs %s' % \ (shared_connector.fullname, [pipe.crtc.id for pipe in pipes])) - self.logger.log("Highest display resolution: %ux%u" % (max_hdisplay, max_vdisplay)) + self.logger.log('Highest display resolution: %ux%u' % (max_hdisplay, max_vdisplay)) for master_pipe in pipes: req = kmstest.AtomicRequest(self) @@ -97,13 +97,13 @@ class RoutingTest(kmstest.KMSTest): 'CRTC_H': mode.vdisplay, }) - route.append("CRTC %u to connector %s" % (pipe.crtc.id, pipe.connector.fullname)) + route.append('CRTC %u to connector %s' % (pipe.crtc.id, pipe.connector.fullname)) - self.logger.log("Routing " + ", ".join(route)) + self.logger.log('Routing ' + ', '.join(route)) ret = req.commit_sync(True) if ret < 0: - self.fail("atomic commit failed with %d" % ret) + self.fail('atomic commit failed with %d' % ret) return time.sleep(5) diff --git a/tests/kmstest.py b/tests/kmstest.py index 949bb20..708e699 100755 --- a/tests/kmstest.py +++ b/tests/kmstest.py @@ -63,23 +63,23 @@ class EventLoop(selectors.DefaultSelector): class KernelLogMessage(object): def __init__(self, msg): - pos = msg.find(";") + pos = msg.find(';') header = msg[:pos] msg = msg[pos+1:] - facility, sequence, timestamp, *other = header.split(",") + facility, sequence, timestamp, *other = header.split(',') self.facility = int(facility) self.sequence = int(sequence) self.timestamp = int(timestamp) / 1000000. - msg = msg.split("\n") + msg = msg.split('\n') self.msg = msg[0] self.tags = {} try: tags = msg[1:-1] for tag in tags: - tag = tag.strip().split("=") + tag = tag.strip().split('=') self.tags[tag[0]] = tag[1] except: pass @@ -87,7 +87,7 @@ class KernelLogMessage(object): class KernelLogReader(object): def __init__(self): - self.kmsg = os.open("/dev/kmsg", 0) + self.kmsg = os.open('/dev/kmsg', 0) flags = fcntl.fcntl(self.kmsg, fcntl.F_GETFL) fcntl.fcntl(self.kmsg, fcntl.F_SETFL, flags | os.O_NONBLOCK) os.lseek(self.kmsg, 0, os.SEEK_END) @@ -100,7 +100,7 @@ class KernelLogReader(object): while True: try: msg = os.read(self.kmsg, 8191) - msg = msg.decode("utf-8") + msg = msg.decode('utf-8') except OSError as e: if e.errno == errno.EAGAIN: break @@ -113,7 +113,7 @@ class KernelLogReader(object): class Logger(object): def __init__(self, name): - self.logfile = open("%s.log" % name, "w") + self.logfile = open('%s.log' % name, 'w') self._kmsg = KernelLogReader() def __del__(self): @@ -129,7 +129,7 @@ class Logger(object): def event(self): kmsgs = self._kmsg.read() for msg in kmsgs: - self.logfile.write("K [%6f] %s\n" % (msg.timestamp, msg.msg)) + self.logfile.write('K [%6f] %s\n' % (msg.timestamp, msg.msg)) self.logfile.flush() @property @@ -146,13 +146,13 @@ class Logger(object): self.event() now = time.clock_gettime(time.CLOCK_MONOTONIC) - self.logfile.write("U [%6f] %s\n" % (now, msg)) + self.logfile.write('U [%6f] %s\n' % (now, msg)) self.logfile.flush() class CRC(object): def __init__(self, crc): - if crc.startswith("XXXXXXXXXX"): + if crc.startswith('XXXXXXXXXX'): self.frame = None else: self.frame = int(crc[:10], 16) @@ -171,8 +171,8 @@ class CRCReader(object): # Hardcode the device minor to 0 as the KMSTest constructor opens the # default card object. - self.dir = os.open("/sys/kernel/debug/dri/0/crtc-%u/crc" % self.pipe, 0) - self.ctrl = os.open("control", os.O_WRONLY, dir_fd = self.dir) + self.dir = os.open('/sys/kernel/debug/dri/0/crtc-%u/crc' % self.pipe, 0) + self.ctrl = os.open('control', os.O_WRONLY, dir_fd = self.dir) self.data = -1 def __del__(self): @@ -181,8 +181,8 @@ class CRCReader(object): os.close(self.dir) def start(self, source): - os.write(self.ctrl, source.encode("ascii")) - self.data = os.open("data", os.O_RDONLY, dir_fd = self.dir) + os.write(self.ctrl, source.encode('ascii')) + self.data = os.open('data', os.O_RDONLY, dir_fd = self.dir) def stop(self): if self.data != -1: @@ -194,7 +194,7 @@ class CRCReader(object): while len(crcs) < num_entries: try: crc = os.read(self.data, CRCReader.MAX_LINE_LEN) - crc = crc.decode("ascii") + crc = crc.decode('ascii') except OSError as e: if e.errno == errno.EAGAIN: break @@ -211,7 +211,7 @@ class Dist(object): self.y = y def __repr__(self): - return "(%d,%d)" % (self.x, self.y) + return '(%d,%d)' % (self.x, self.y) class Point(object): @@ -220,7 +220,7 @@ class Point(object): self.y = y def __repr__(self): - return "(%d,%d)" % (self.x, self.y) + return '(%d,%d)' % (self.x, self.y) def move(self, distance): self.x += distance.x @@ -233,7 +233,7 @@ class Size(object): self.height = height def __repr__(self): - return "%ux%u" % (self.width, self.height) + return '%ux%u' % (self.width, self.height) class Rect(object): @@ -244,7 +244,7 @@ class Rect(object): self.height = height def __repr__(self): - return "(%d,%d)/%ux%u" % (self.left, self.top, self.width, self.height) + return '(%d,%d)/%ux%u' % (self.left, self.top, self.width, self.height) def isEmpty(self): """Check if the rectangle has a zero width or height""" @@ -387,7 +387,7 @@ class KMSTest(object): def atomic_plane_disable(self, plane, sync=True): req = AtomicRequest(self) - req.add(plane, { "FB_ID": 0, 'CRTC_ID': 0 }) + req.add(plane, { 'FB_ID': 0, 'CRTC_ID': 0 }) if sync: return req.commit_sync() @@ -397,7 +397,7 @@ class KMSTest(object): def atomic_planes_disable(self, sync=True): req = AtomicRequest(self) for plane in self.card.planes: - req.add(plane, { "FB_ID": 0, 'CRTC_ID': 0 }) + req.add(plane, { 'FB_ID': 0, 'CRTC_ID': 0 }) if sync: return req.commit_sync() @@ -462,32 +462,32 @@ class KMSTest(object): def start(self, name): """Start a test.""" self.test_name = name - self.logger.log("Testing %s" % name) - sys.stdout.write("Testing %s: " % name) + self.logger.log('Testing %s' % name) + sys.stdout.write('Testing %s: ' % name) sys.stdout.flush() def progress(self, current, maximum): - sys.stdout.write("\rTesting %s: %u/%u" % (self.test_name, current, maximum)) + sys.stdout.write('\rTesting %s: %u/%u' % (self.test_name, current, maximum)) sys.stdout.flush() def fail(self, reason): """Complete a test with failure.""" - self.logger.log("Test failed. Reason: %s" % reason) + self.logger.log('Test failed. Reason: %s' % reason) self.logger.flush() - sys.stdout.write("\rTesting %s: FAIL\n" % self.test_name) + sys.stdout.write('\rTesting %s: FAIL\n' % self.test_name) sys.stdout.flush() def skip(self, reason): """Complete a test with skip.""" - self.logger.log("Test skipped. Reason: %s" % reason) + self.logger.log('Test skipped. Reason: %s' % reason) self.logger.flush() - sys.stdout.write("SKIP\n") + sys.stdout.write('SKIP\n') sys.stdout.flush() def success(self): """Complete a test with success.""" - self.logger.log("Test completed successfully") + self.logger.log('Test completed successfully') self.logger.flush() - sys.stdout.write("\rTesting %s: SUCCESS\n" % self.test_name) + sys.stdout.write('\rTesting %s: SUCCESS\n' % self.test_name) sys.stdout.flush() |