/* * Copyright (c) 2006-2007 Intel Corporation * Copyright (c) 2007 Dave Airlie * * DRM core CRTC related functions * * Permission to use, copy, modify, distribute, and sell this software and its * documentation for any purpose is hereby granted without fee, provided that * the above copyright notice appear in all copies and that both that copyright * notice and this permission notice appear in supporting documentation, and * that the name of the copyright holders not be used in advertising or * publicity pertaining to distribution of the software without specific, * written prior permission. The copyright holders make no representations * about the suitability of this software for any purpose. It is provided "as * is" without express or implied warranty. * * THE COPYRIGHT HOLDERS DISCLAIM ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO * EVENT SHALL THE COPYRIGHT HOLDERS BE LIABLE FOR ANY SPECIAL, INDIRECT OR * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, * DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE * OF THIS SOFTWARE. * * Authors: * Keith Packard * Eric Anholt * Dave Airlie * Jesse Barnes */ #include #include "drm.h" #include "drmP.h" #include "drm_crtc.h" struct drm_prop_enum_list { int type; char *name; }; /* * Global properties */ static struct drm_prop_enum_list drm_dpms_enum_list[] = { { DPMSModeOn, "On" }, { DPMSModeStandby, "Standby" }, { DPMSModeSuspend, "Suspend" }, { DPMSModeOff, "Off" } }; char *drm_get_dpms_name(int val) { int i; for (i = 0; i < ARRAY_SIZE(drm_dpms_enum_list); i++) if (drm_dpms_enum_list[i].type == val) return drm_dpms_enum_list[i].name; return "unknown"; } static struct drm_prop_enum_list drm_conn_enum_list[] = { { ConnectorUnknown, "Unknown" }, { ConnectorVGA, "VGA" }, { ConnectorDVII, "DVI-I" }, { ConnectorDVID, "DVI-D" }, { ConnectorDVIA, "DVI-A" }, { ConnectorComposite, "Composite" }, { ConnectorSVIDEO, "SVIDEO" }, { ConnectorLVDS, "LVDS" }, { ConnectorComponent, "Component" }, { Connector9PinDIN, "9-pin DIN" }, { ConnectorDisplayPort, "DisplayPort" }, { ConnectorHDMIA, "HDMI Type A" }, { ConnectorHDMIB, "HDMI Type B" }, }; static struct drm_prop_enum_list drm_output_enum_list[] = { { DRM_MODE_OUTPUT_NONE, "None" }, { DRM_MODE_OUTPUT_DAC, "DAC" }, { DRM_MODE_OUTPUT_TMDS, "TMDS" }, { DRM_MODE_OUTPUT_LVDS, "LVDS" }, { DRM_MODE_OUTPUT_TVDAC, "TV" }, }; char *drm_get_output_name(struct drm_output *output) { static char buf[32]; snprintf(buf, 32, "%s-%d", drm_output_enum_list[output->output_type].name, output->output_type_id); return buf; } char *drm_get_output_status_name(enum drm_output_status status) { if (status == output_status_connected) return "connected"; else if (status == output_status_disconnected) return "disconnected"; else return "unknown"; } /** * drm_idr_get - allocate a new identifier * @dev: DRM device * @ptr: object pointer, used to generate unique ID * * LOCKING: * Caller must hold DRM mode_config lock. * * Create a unique identifier based on @ptr in @dev's identifier space. Used * for tracking modes, CRTCs and outputs. * * RETURNS: * New unique (relative to other objects in @dev) integer identifier for the * object. */ int drm_idr_get(struct drm_device *dev, void *ptr) { int new_id = 0; int ret; again: if (idr_pre_get(&dev->mode_config.crtc_idr, GFP_KERNEL) == 0) { DRM_ERROR("Ran out memory getting a mode number\n"); return 0; } ret = idr_get_new_above(&dev->mode_config.crtc_idr, ptr, 1, &new_id); if (ret == -EAGAIN) goto again; return new_id; } /** * drm_idr_put - free an identifer * @dev: DRM device * @id: ID to free * * LOCKING: * Caller must hold DRM mode_config lock. * * Free @id from @dev's unique identifier pool. */ void drm_idr_put(struct drm_device *dev, int id) { idr_remove(&dev->mode_config.crtc_idr, id); } /** * drm_crtc_from_fb - find the CRTC structure associated with an fb * @dev: DRM device * @fb: framebuffer in question * * LOCKING: * Caller must hold mode_config lock. * * Find CRTC in the mode_config structure that matches @fb. * * RETURNS: * Pointer to the CRTC or NULL if it wasn't found. */ struct drm_crtc *drm_crtc_from_fb(struct drm_device *dev, struct drm_framebuffer *fb) { struct drm_crtc *crtc; list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) { if (crtc->fb == fb) return crtc; } return NULL; } /** * drm_framebuffer_create - create a new framebuffer object * @dev: DRM device * * LOCKING: * Caller must hold mode config lock. * * Creates a new framebuffer objects and adds it to @dev's DRM mode_config. * * RETURNS: * Pointer to new framebuffer or NULL on error. */ struct drm_framebuffer *drm_framebuffer_create(struct drm_device *dev) { struct drm_framebuffer *fb; fb = kzalloc(sizeof(struct drm_framebuffer), GFP_KERNEL); if (!fb) return NULL; fb->id = drm_idr_get(dev, fb); fb->dev = dev; dev->mode_config.num_fb++; list_add(&fb->head, &dev->mode_config.fb_list); return fb; } EXPORT_SYMBOL(drm_framebuffer_create); /** * drm_framebuffer_destroy - remove a framebuffer object * @fb: framebuffer to remove * * LOCKING: * Caller must hold mode config lock. * * Scans all the CRTCs in @dev's mode_config. If they're using @fb, removes * it, setting it to NULL. */ void drm_framebuffer_destroy(struct drm_framebuffer *fb) { struct drm_device *dev = fb->dev; struct drm_crtc *crtc; /* remove from any CRTC */ list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) { if (crtc->fb == fb) crtc->fb = NULL; } drm_idr_put(dev, fb->id); list_del(&fb->head); dev->mode_config.num_fb--; kfree(fb); } EXPORT_SYMBOL(drm_framebuffer_destroy); /** * drm_crtc_create - create a new CRTC object * @dev: DRM device * @funcs: callbacks for the new CRTC * * LOCKING: * Caller must hold mode config lock. * * Creates a new CRTC object and adds it to @dev's mode_config structure. * * RETURNS: * Pointer to new CRTC object or NULL on error. */ struct drm_crtc *drm_crtc_create(struct drm_device *dev, const struct drm_crtc_funcs *funcs) { struct drm_crtc *crtc; crtc = kzalloc(sizeof(struct drm_crtc), GFP_KERNEL); if (!crtc) return NULL; crtc->dev = dev; crtc->funcs = funcs; crtc->id = drm_idr_get(dev, crtc); list_add_tail(&crtc->head, &dev->mode_config.crtc_list); dev->mode_config.num_crtc++; return crtc; } EXPORT_SYMBOL(drm_crtc_create); /** * drm_crtc_destroy - remove a CRTC object * @crtc: CRTC to remove * * LOCKING: * Caller must hold mode config lock. * * Cleanup @crtc. Calls @crtc's cleanup function, then removes @crtc from * its associated DRM device's mode_config. Frees it afterwards. */ void drm_crtc_destroy(struct drm_crtc *crtc) { struct drm_device *dev = crtc->dev; if (crtc->funcs->cleanup) (*crtc->funcs->cleanup)(crtc); drm_idr_put(dev, crtc->id); list_del(&crtc->head); dev->mode_config.num_crtc--; kfree(crtc); } EXPORT_SYMBOL(drm_crtc_destroy); /** * drm_crtc_in_use - check if a given CRTC is in a mode_config * @crtc: CRTC to check * * LOCKING: * Caller must hold mode config lock. * * Walk @crtc's DRM device's mode_config and see if it's in use. * * RETURNS: * True if @crtc is part of the mode_config, false otherwise. */ bool drm_crtc_in_use(struct drm_crtc *crtc) { struct drm_output *output; struct drm_device *dev = crtc->dev; /* FIXME: Locking around list access? */ list_for_each_entry(output, &dev->mode_config.output_list, head) if (output->crtc == crtc) return true; return false; } EXPORT_SYMBOL(drm_crtc_in_use); /* * Detailed mode info for a standard 640x480@60Hz monitor */ static struct drm_display_mode std_mode[] = { { DRM_MODE("640x480", DRM_MODE_TYPE_DEFAULT, 25200, 640, 656, 752, 800, 0, 480, 490, 492, 525, 0, V_NHSYNC | V_NVSYNC) }, /* 640x480@60Hz */ }; /** * drm_crtc_probe_output_modes - get complete set of display modes * @dev: DRM device * @maxX: max width for modes * @maxY: max height for modes * * LOCKING: * Caller must hold mode config lock. * * Based on @dev's mode_config layout, scan all the outputs and try to detect * modes on them. Modes will first be added to the output's probed_modes * list, then culled (based on validity and the @maxX, @maxY parameters) and * put into the normal modes list. * * Intended to be used either at bootup time or when major configuration * changes have occurred. * * FIXME: take into account monitor limits */ void drm_crtc_probe_single_output_modes(struct drm_output *output, int maxX, int maxY) { struct drm_device *dev = output->dev; struct drm_display_mode *mode, *t; int ret; //if (maxX == 0 || maxY == 0) // TODO /* set all modes to the unverified state */ list_for_each_entry_safe(mode, t, &output->modes, head) mode->status = MODE_UNVERIFIED; output->status = (*output->funcs->detect)(output); if (output->status == output_status_disconnected) { DRM_DEBUG("%s is disconnected\n", drm_get_output_name(output)); /* TODO set EDID to NULL */ return; } ret = (*output->funcs->get_modes)(output); if (ret) { drm_mode_output_list_update(output); } if (maxX && maxY) drm_mode_validate_size(dev, &output->modes, maxX, maxY, 0); list_for_each_entry_safe(mode, t, &output->modes, head) { if (mode->status == MODE_OK) mode->status = (*output->funcs->mode_valid)(output,mode); } drm_mode_prune_invalid(dev, &output->modes, TRUE); if (list_empty(&output->modes)) { struct drm_display_mode *stdmode; DRM_DEBUG("No valid modes on %s\n", drm_get_output_name(output)); /* Should we do this here ??? * When no valid EDID modes are available we end up * here and bailed in the past, now we add a standard * 640x480@60Hz mode and carry on. */ stdmode = drm_mode_duplicate(dev, &std_mode[0]); drm_mode_probed_add(output, stdmode); drm_mode_list_concat(&output->probed_modes, &output->modes); DRM_DEBUG("Adding standard 640x480 @ 60Hz to %s\n", drm_get_output_name(output)); } drm_mode_sort(&output->modes); DRM_DEBUG("Probed modes for %s\n", drm_get_output_name(output)); list_for_each_entry_safe(mode, t, &output->modes, head) { mode->vrefresh = drm_mode_vrefresh(mode); drm_mode_set_crtcinfo(mode, CRTC_INTERLACE_HALVE_V); drm_mode_debug_printmodeline(dev, mode); } } void drm_crtc_probe_output_modes(struct drm_device *dev, int maxX, int maxY) { struct drm_output *output; list_for_each_entry(output, &dev->mode_config.output_list, head) { drm_crtc_probe_single_output_modes(output, maxX, maxY); } } EXPORT_SYMBOL(drm_crtc_probe_output_modes); /** * drm_crtc_set_mode - set a mode * @crtc: CRTC to program * @mode: mode to use * @x: width of mode * @y: height of mode * * LOCKING: * Caller must hold mode config lock. * * Try to set @mode on @crtc. Give @crtc and its associated outputs a chance * to fixup or reject the mode prior to trying to set it. * * RETURNS: * True if the mode was set successfully, or false otherwise. */ bool drm_crtc_set_mode(struct drm_crtc *crtc, struct drm_display_mode *mode, int x, int y) { struct drm_device *dev = crtc->dev; struct drm_display_mode *adjusted_mode, saved_mode; int saved_x, saved_y; struct drm_output *output; bool ret = true; adjusted_mode = drm_mode_duplicate(dev, mode); crtc->enabled = drm_crtc_in_use(crtc); if (!crtc->enabled) return true; saved_mode = crtc->mode; saved_x = crtc->x; saved_y = crtc->y; /* Update crtc values up front so the driver can rely on them for mode * setting. */ crtc->mode = *mode; crtc->x = x; crtc->y = y; if (drm_mode_equal(&saved_mode, &crtc->mode)) { if (saved_x != crtc->x || saved_y != crtc->y) { crtc->funcs->mode_set_base(crtc, crtc->x, crtc->y); goto done; } } /* Pass our mode to the outputs and the CRTC to give them a chance to * adjust it according to limitations or output properties, and also * a chance to reject the mode entirely. */ list_for_each_entry(output, &dev->mode_config.output_list, head) { if (output->crtc != crtc) continue; if (!(ret = output->funcs->mode_fixup(output, mode, adjusted_mode))) { goto done; } } if (!(ret = crtc->funcs->mode_fixup(crtc, mode, adjusted_mode))) { goto done; } /* Prepare the outputs and CRTCs before setting the mode. */ list_for_each_entry(output, &dev->mode_config.output_list, head) { if (output->crtc != crtc) continue; /* Disable the output as the first thing we do. */ output->funcs->prepare(output); } crtc->funcs->prepare(crtc); /* Set up the DPLL and any output state that needs to adjust or depend * on the DPLL. */ crtc->funcs->mode_set(crtc, mode, adjusted_mode, x, y); list_for_each_entry(output, &dev->mode_config.output_list, head) { if (output->crtc != crtc) continue; DRM_INFO("%s: set mode %s %x\n", drm_get_output_name(output), mode->name, mode->mode_id); output->funcs->mode_set(output, mode, adjusted_mode); } /* Now, enable the clocks, plane, pipe, and outputs that we set up. */ crtc->funcs->commit(crtc); list_for_each_entry(output, &dev->mode_config.output_list, head) { if (output->crtc != crtc) continue; output->funcs->commit(output); #if 0 // TODO def RANDR_12_INTERFACE if (output->randr_output) RRPostPendingProperties (output->randr_output); #endif } /* XXX free adjustedmode */ drm_mode_destroy(dev, adjusted_mode); /* TODO */ // if (scrn->pScreen) // drm_crtc_set_screen_sub_pixel_order(dev); done: if (!ret) { crtc->mode = saved_mode; crtc->x = saved_x; crtc->y = saved_y; } return ret; } EXPORT_SYMBOL(drm_crtc_set_mode); /** * drm_disable_unused_functions - disable unused objects * @dev: DRM device * * LOCKING: * Caller must hold mode config lock. * * If an output or CRTC isn't part of @dev's mode_config, it can be disabled * by calling its dpms function, which should power it off. */ void drm_disable_unused_functions(struct drm_device *dev) { struct drm_output *output; struct drm_crtc *crtc; list_for_each_entry(output, &dev->mode_config.output_list, head) { if (!output->crtc) (*output->funcs->dpms)(output, DPMSModeOff); } list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) { if (!crtc->enabled) crtc->funcs->dpms(crtc, DPMSModeOff); } } EXPORT_SYMBOL(drm_disable_unused_functions); /** * drm_mode_probed_add - add a mode to the specified output's probed mode list * @output: output the new mode * @mode: mode data * * LOCKING: * Caller must hold mode config lock. * * Add @mode to @output's mode list for later use. */ void drm_mode_probed_add(struct drm_output *output, struct drm_display_mode *mode) { list_add(&mode->head, &output->probed_modes); } EXPORT_SYMBOL(drm_mode_probed_add); /** * drm_mode_remove - remove and free a mode * @output: output list to modify * @mode: mode to remove * * LOCKING: * Caller must hold mode config lock. * * Remove @mode from @output's mode list, then free it. */ void drm_mode_remove(struct drm_output *output, struct drm_display_mode *mode) { list_del(&mode->head); kfree(mode); } EXPORT_SYMBOL(drm_mode_remove); /** * drm_output_create - create a new output * @dev: DRM device * @funcs: callbacks for this output * @name: user visible name of the output * * LOCKING: * Caller must hold @dev's mode_config lock. * * Creates a new drm_output structure and adds it to @dev's mode_config * structure. * * RETURNS: * Pointer to the new output or NULL on error. */ struct drm_output *drm_output_create(struct drm_device *dev, const struct drm_output_funcs *funcs, int output_type) { struct drm_output *output = NULL; output = kzalloc(sizeof(struct drm_output), GFP_KERNEL); if (!output) return NULL; output->dev = dev; output->funcs = funcs; output->id = drm_idr_get(dev, output); output->output_type = output_type; output->output_type_id = 1; /* TODO */ INIT_LIST_HEAD(&output->user_modes); INIT_LIST_HEAD(&output->probed_modes); INIT_LIST_HEAD(&output->modes); /* randr_output? */ /* output_set_monitor(output)? */ /* check for output_ignored(output)? */ mutex_lock(&dev->mode_config.mutex); list_add_tail(&output->head, &dev->mode_config.output_list); dev->mode_config.num_output++; drm_output_attach_property(output, dev->mode_config.edid_property, 0); drm_output_attach_property(output, dev->mode_config.dpms_property, 0); mutex_unlock(&dev->mode_config.mutex); return output; } EXPORT_SYMBOL(drm_output_create); /** * drm_output_destroy - remove an output * @output: output to remove * * LOCKING: * Caller must hold @dev's mode_config lock. * * Call @output's cleanup function, then remove the output from the DRM * mode_config after freeing @output's modes. */ void drm_output_destroy(struct drm_output *output) { struct drm_device *dev = output->dev; struct drm_display_mode *mode, *t; if (*output->funcs->cleanup) (*output->funcs->cleanup)(output); list_for_each_entry_safe(mode, t, &output->probed_modes, head) drm_mode_remove(output, mode); list_for_each_entry_safe(mode, t, &output->modes, head) drm_mode_remove(output, mode); list_for_each_entry_safe(mode, t, &output->user_modes, head) drm_mode_remove(output, mode); mutex_lock(&dev->mode_config.mutex); drm_idr_put(dev, output->id); list_del(&output->head); mutex_unlock(&dev->mode_config.mutex); kfree(output); } EXPORT_SYMBOL(drm_output_destroy); /** * drm_mode_create - create a new display mode * @dev: DRM device * * LOCKING: * None. * * Create a new drm_display_mode, give it an ID, and return it. * * RETURNS: * Pointer to new mode on success, NULL on error. */ struct drm_display_mode *drm_mode_create(struct drm_device *dev) { struct drm_display_mode *nmode; nmode = kzalloc(sizeof(struct drm_display_mode), GFP_KERNEL); if (!nmode) return NULL; nmode->mode_id = drm_idr_get(dev, nmode); return nmode; } EXPORT_SYMBOL(drm_mode_create); /** * drm_mode_destroy - remove a mode * @dev: DRM device * @mode: mode to remove * * LOCKING: * Caller must hold mode config lock. * * Free @mode's unique identifier, then free it. */ void drm_mode_destroy(struct drm_device *dev, struct drm_display_mode *mode) { drm_idr_put(dev, mode->mode_id); kfree(mode); } EXPORT_SYMBOL(drm_mode_destroy); static int drm_mode_create_standard_output_properties(struct drm_device *dev) { int i; /* * Standard properties (apply to all outputs) */ dev->mode_config.edid_property = drm_property_create(dev, DRM_MODE_PROP_BLOB | DRM_MODE_PROP_IMMUTABLE, "EDID", 0); dev->mode_config.dpms_property = drm_property_create(dev, DRM_MODE_PROP_ENUM, "DPMS", ARRAY_SIZE(drm_dpms_enum_list)); for (i = 0; i < ARRAY_SIZE(drm_dpms_enum_list); i++) drm_property_add_enum(dev->mode_config.dpms_property, i, drm_dpms_enum_list[i].type, drm_dpms_enum_list[i].name); dev->mode_config.connector_type_property = drm_property_create(dev, DRM_MODE_PROP_ENUM | DRM_MODE_PROP_IMMUTABLE, "Connector Type", ARRAY_SIZE(drm_conn_enum_list)); for (i = 0; i < ARRAY_SIZE(drm_conn_enum_list); i++) drm_property_add_enum(dev->mode_config.connector_type_property, i, drm_conn_enum_list[i].type, drm_conn_enum_list[i].name); dev->mode_config.connector_num_property = drm_property_create(dev, DRM_MODE_PROP_RANGE | DRM_MODE_PROP_IMMUTABLE, "Connector ID", 2); dev->mode_config.connector_num_property->values[0] = 0; dev->mode_config.connector_num_property->values[1] = 20; return 0; } /** * drm_create_tv_properties - create TV specific output properties * @dev: DRM device * @num_modes: number of different TV formats (modes) supported * @modes: array of pointers to strings containing name of each format * * Called by a driver's TV initialization routine, this function creates * the TV specific output properties for a given device. Caller is * responsible for allocating a list of format names and passing them to * this routine. */ bool drm_create_tv_properties(struct drm_device *dev, int num_modes, char *modes[]) { int i; dev->mode_config.tv_left_margin_property = drm_property_create(dev, DRM_MODE_PROP_RANGE | DRM_MODE_PROP_IMMUTABLE, "left margin", 2); dev->mode_config.tv_left_margin_property->values[0] = 0; dev->mode_config.tv_left_margin_property->values[1] = 100; dev->mode_config.tv_right_margin_property = drm_property_create(dev, DRM_MODE_PROP_RANGE, "right margin", 2); dev->mode_config.tv_right_margin_property->values[0] = 0; dev->mode_config.tv_right_margin_property->values[1] = 100; dev->mode_config.tv_top_margin_property = drm_property_create(dev, DRM_MODE_PROP_RANGE, "top margin", 2); dev->mode_config.tv_top_margin_property->values[0] = 0; dev->mode_config.tv_top_margin_property->values[1] = 100; dev->mode_config.tv_bottom_margin_property = drm_property_create(dev, DRM_MODE_PROP_RANGE, "bottom margin", 2); dev->mode_config.tv_bottom_margin_property->values[0] = 0; dev->mode_config.tv_bottom_margin_property->values[1] = 100; dev->mode_config.tv_mode_property = drm_property_create(dev, DRM_MODE_PROP_ENUM, "mode", num_modes); for (i = 0; i < num_modes; i++) drm_property_add_enum(dev->mode_config.tv_mode_property, i, i, modes[i]); return 0; } EXPORT_SYMBOL(drm_create_tv_properties); /** * drm_mode_config_init - initialize DRM mode_configuration structure * @dev: DRM device * * LOCKING: * None, should happen single threaded at init time. * * Initialize @dev's mode_config structure, used for tracking the graphics * configuration of @dev. */ void drm_mode_config_init(struct drm_device *dev) { mutex_init(&dev->mode_config.mutex); INIT_LIST_HEAD(&dev->mode_config.fb_list); INIT_LIST_HEAD(&dev->mode_config.crtc_list); INIT_LIST_HEAD(&dev->mode_config.output_list); INIT_LIST_HEAD(&dev->mode_config.property_list); INIT_LIST_HEAD(&dev->mode_config.property_blob_list); idr_init(&dev->mode_config.crtc_idr); drm_mode_create_standard_output_properties(dev); /* Just to be sure */ dev->mode_config.num_fb = 0; dev->mode_config.num_output = 0; dev->mode_config.num_crtc = 0; dev->mode_config.hotplug_counter = 0; } EXPORT_SYMBOL(drm_mode_config_init); /** * drm_get_buffer_object - find the buffer object for a given handle * @dev: DRM device * @bo: pointer to caller's buffer_object pointer * @handle: handle to lookup * * LOCKING: * Must take @dev's struct_mutex to protect buffer object lookup. * * Given @handle, lookup the buffer object in @dev and put it in the caller's * @bo pointer. * * RETURNS: * Zero on success, -EINVAL if the handle couldn't be found. */ static int drm_get_buffer_object(struct drm_device *dev, struct drm_buffer_object **bo, unsigned long handle) { struct drm_user_object *uo; struct drm_hash_item *hash; int ret; *bo = NULL; mutex_lock(&dev->struct_mutex); ret = drm_ht_find_item(&dev->object_hash, handle, &hash); if (ret) { DRM_ERROR("Couldn't find handle.\n"); ret = -EINVAL; goto out_err; } uo = drm_hash_entry(hash, struct drm_user_object, hash); if (uo->type != drm_buffer_type) { ret = -EINVAL; goto out_err; } *bo = drm_user_object_entry(uo, struct drm_buffer_object, base); ret = 0; out_err: mutex_unlock(&dev->struct_mutex); return ret; } /** * drm_pick_crtcs - pick crtcs for output devices * @dev: DRM device * * LOCKING: * Caller must hold mode config lock. */ static void drm_pick_crtcs (struct drm_device *dev) { int c, o, assigned; struct drm_output *output, *output_equal; struct drm_crtc *crtc; struct drm_display_mode *des_mode = NULL, *modes, *modes_equal; int found; list_for_each_entry(output, &dev->mode_config.output_list, head) { output->crtc = NULL; /* Don't hook up outputs that are disconnected ?? * * This is debateable. Do we want fixed /dev/fbX or * dynamic on hotplug (need mode code for that though) ? * * If we don't hook up outputs now, then we only create * /dev/fbX for the output that's enabled, that's good as * the users console will be on that output. * * If we do hook up outputs that are disconnected now, then * the user may end up having to muck about with the fbcon * map flags to assign his console to the enabled output. Ugh. */ if (output->status != output_status_connected) continue; if (list_empty(&output->modes)) continue; des_mode = NULL; found = 0; list_for_each_entry(des_mode, &output->modes, head) { if (des_mode->type & DRM_MODE_TYPE_PREFERRED) { found = 1; break; } } /* No preferred mode, let's just select the first available */ if (!found) { des_mode = NULL; list_for_each_entry(des_mode, &output->modes, head) { break; } } c = -1; list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) { assigned = 0; c++; if ((output->possible_crtcs & (1 << c)) == 0) continue; list_for_each_entry(output_equal, &dev->mode_config.output_list, head) { if (output->id == output_equal->id) continue; /* Find out if crtc has been assigned before */ if (output_equal->crtc == crtc) assigned = 1; } #if 1 /* continue for now */ if (assigned) continue; #endif o = -1; list_for_each_entry(output_equal, &dev->mode_config.output_list, head) { o++; if (output->id == output_equal->id) continue; list_for_each_entry(modes, &output->modes, head) { list_for_each_entry(modes_equal, &output_equal->modes, head) { if (drm_mode_equal (modes, modes_equal)) { if ((output->possible_clones & output_equal->possible_clones) && (output_equal->crtc == crtc)) { printk("Cloning %s (0x%lx) to %s (0x%lx)\n",drm_get_output_name(output),output->possible_clones,drm_get_output_name(output_equal),output_equal->possible_clones); des_mode = modes; assigned = 0; goto clone; } } } } } clone: /* crtc has been assigned skip it */ if (assigned) continue; /* Found a CRTC to attach to, do it ! */ output->crtc = crtc; output->crtc->desired_mode = des_mode; output->initial_x = 0; output->initial_y = 0; DRM_DEBUG("Desired mode for CRTC %d is 0x%x:%s\n",c,des_mode->mode_id, des_mode->name); break; } } } EXPORT_SYMBOL(drm_pick_crtcs); /** * drm_initial_config - setup a sane initial output configuration * @dev: DRM device * @can_grow: this configuration is growable * * LOCKING: * Called at init time, must take mode config lock. * * Scan the CRTCs and outputs and try to put together an initial setup. * At the moment, this is a cloned configuration across all heads with * a new framebuffer object as the backing store. * * RETURNS: * Zero if everything went ok, nonzero otherwise. */ bool drm_initial_config(struct drm_device *dev, bool can_grow) { struct drm_output *output; struct drm_crtc *crtc; int ret = false; mutex_lock(&dev->mode_config.mutex); drm_crtc_probe_output_modes(dev, 2048, 2048); drm_pick_crtcs(dev); list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) { /* can't setup the crtc if there's no assigned mode */ if (!crtc->desired_mode) continue; /* Now setup the fbdev for attached crtcs */ dev->driver->fb_probe(dev, crtc); } /* This is a little screwy, as we've already walked the outputs * above, but it's a little bit of magic too. There's the potential * for things not to get setup above if an existing device gets * re-assigned thus confusing the hardware. By walking the outputs * this fixes up their crtc's. */ list_for_each_entry(output, &dev->mode_config.output_list, head) { /* can't setup the output if there's no assigned mode */ if (!output->crtc || !output->crtc->desired_mode) continue; /* and needs an attached fb */ if (output->crtc->fb) drm_crtc_set_mode(output->crtc, output->crtc->desired_mode, 0, 0); } drm_disable_unused_functions(dev); mutex_unlock(&dev->mode_config.mutex); return ret; } EXPORT_SYMBOL(drm_initial_config); /** * drm_mode_config_cleanup - free up DRM mode_config info * @dev: DRM device * * LOCKING: * Caller must hold mode config lock. * * Free up all the outputs and CRTCs associated with this DRM device, then * free up the framebuffers and associated buffer objects. * * FIXME: cleanup any dangling user buffer objects too */ void drm_mode_config_cleanup(struct drm_device *dev) { struct drm_output *output, *ot; struct drm_crtc *crtc, *ct; struct drm_framebuffer *fb, *fbt; struct drm_property *property, *pt; list_for_each_entry_safe(output, ot, &dev->mode_config.output_list, head) { drm_sysfs_output_remove(output); drm_output_destroy(output); } list_for_each_entry_safe(property, pt, &dev->mode_config.property_list, head) { drm_property_destroy(dev, property); } list_for_each_entry_safe(fb, fbt, &dev->mode_config.fb_list, head) { /* there should only be bo of kernel type left */ if (fb->bo->type != drm_bo_type_kernel) drm_framebuffer_destroy(fb); else dev->driver->fb_remove(dev, drm_crtc_from_fb(dev, fb)); } list_for_each_entry_safe(crtc, ct, &dev->mode_config.crtc_list, head) { drm_crtc_destroy(crtc); } } EXPORT_SYMBOL(drm_mode_config_cleanup); /** * drm_crtc_set_config - set a new config from userspace * @crtc: CRTC to setup * @crtc_info: user provided configuration * @new_mode: new mode to set * @output_set: set of outputs for the new config * @fb: new framebuffer * * LOCKING: * Caller must hold mode config lock. * * Setup a new configuration, provided by the user in @crtc_info, and enable * it. * * RETURNS: * Zero. (FIXME) */ int drm_crtc_set_config(struct drm_crtc *crtc, struct drm_mode_crtc *crtc_info, struct drm_display_mode *new_mode, struct drm_output **output_set, struct drm_framebuffer *fb) { struct drm_device *dev = crtc->dev; struct drm_crtc **save_crtcs, *new_crtc; bool save_enabled = crtc->enabled; bool changed = false; bool flip_or_move = false; struct drm_output *output; int count = 0, ro; /* this is meant to be num_output not num_crtc */ save_crtcs = kzalloc(dev->mode_config.num_output * sizeof(struct drm_crtc *), GFP_KERNEL); if (!save_crtcs) return -ENOMEM; /* We should be able to check here if the fb has the same properties * and then just flip_or_move it */ if (crtc->fb != fb) flip_or_move = true; if (crtc_info->x != crtc->x || crtc_info->y != crtc->y) flip_or_move = true; if (new_mode && !drm_mode_equal(new_mode, &crtc->mode)) { DRM_DEBUG("modes are different\n"); drm_mode_debug_printmodeline(dev, &crtc->mode); drm_mode_debug_printmodeline(dev, new_mode); changed = true; } list_for_each_entry(output, &dev->mode_config.output_list, head) { save_crtcs[count++] = output->crtc; if (output->crtc == crtc) new_crtc = NULL; else new_crtc = output->crtc; for (ro = 0; ro < crtc_info->count_outputs; ro++) { if (output_set[ro] == output) new_crtc = crtc; } if (new_crtc != output->crtc) { changed = true; output->crtc = new_crtc; } } /* mode_set_base is not a required function */ if (flip_or_move && !crtc->funcs->mode_set_base) changed = true; if (changed) { crtc->fb = fb; crtc->enabled = (new_mode != NULL); if (new_mode != NULL) { DRM_DEBUG("attempting to set mode from userspace\n"); drm_mode_debug_printmodeline(dev, new_mode); if (!drm_crtc_set_mode(crtc, new_mode, crtc_info->x, crtc_info->y)) { crtc->enabled = save_enabled; count = 0; list_for_each_entry(output, &dev->mode_config.output_list, head) output->crtc = save_crtcs[count++]; kfree(save_crtcs); return -EINVAL; } crtc->desired_x = crtc_info->x; crtc->desired_y = crtc_info->y; crtc->desired_mode = new_mode; } drm_disable_unused_functions(dev); } else if (flip_or_move) { if (crtc->fb != fb) crtc->fb = fb; crtc->funcs->mode_set_base(crtc, crtc_info->x, crtc_info->y); } kfree(save_crtcs); return 0; } /** * drm_hotplug_stage_two * @dev DRM device * @output hotpluged output * * LOCKING. * Caller must hold mode config lock, function might grab struct lock. * * Stage two of a hotplug. * * RETURNS: * Zero on success, errno on failure. */ int drm_hotplug_stage_two(struct drm_device *dev, struct drm_output *output, bool connected) { int has_config = 0; dev->mode_config.hotplug_counter++; /* We might want to do something more here */ if (!connected) { DRM_DEBUG("not connected\n"); return 0; } if (output->crtc && output->crtc->desired_mode) { DRM_DEBUG("drm thinks that the output already has a config\n"); has_config = 1; } drm_crtc_probe_output_modes(dev, 2048, 2048); if (!has_config) drm_pick_crtcs(dev); if (!output->crtc || !output->crtc->desired_mode) { DRM_DEBUG("could not find a desired mode or crtc for output\n"); return 1; } /* We should really check if there is a fb using this crtc */ if (!has_config) dev->driver->fb_probe(dev, output->crtc); else { dev->driver->fb_resize(dev, output->crtc); if (!drm_crtc_set_mode(output->crtc, output->crtc->desired_mode, 0, 0)) DRM_ERROR("failed to set mode after hotplug\n"); } drm_sysfs_hotplug_event(dev); drm_disable_unused_functions(dev); return 0; } EXPORT_SYMBOL(drm_hotplug_stage_two); int drm_mode_hotplug_ioctl(struct drm_device *dev, void *data, struct drm_file *file_priv) { struct drm_mode_hotplug *arg = data; arg->counter = dev->mode_config.hotplug_counter; return 0; } /** * drm_crtc_convert_to_umode - convert a drm_display_mode into a modeinfo * @out: drm_mode_modeinfo struct to return to the user * @in: drm_display_mode to use * * LOCKING: * None. * * Convert a drm_display_mode into a drm_mode_modeinfo structure to return to * the user. */ void drm_crtc_convert_to_umode(struct drm_mode_modeinfo *out, struct drm_display_mode *in) { out->clock = in->clock; out->hdisplay = in->hdisplay; out->hsync_start = in->hsync_start; out->hsync_end = in->hsync_end; out->htotal = in->htotal; out->hskew = in->hskew; out->vdisplay = in->vdisplay; out->vsync_start = in->vsync_start; out->vsync_end = in->vsync_end; out->vtotal = in->vtotal; out->vscan = in->vscan; out->vrefresh = in->vrefresh; out->flags = in->flags; out->type = in->type; strncpy(out->name, in->name, DRM_DISPLAY_MODE_LEN); out->name[DRM_DISPLAY_MODE_LEN-1] = 0; } /** * drm_crtc_convert_to_umode - convert a modeinfo into a drm_display_mode * @out: drm_display_mode to return to the user * @in: drm_mode_modeinfo to use * * LOCKING: * None. * * Convert a drmo_mode_modeinfo into a drm_display_mode structure to return to * the caller. */ void drm_crtc_convert_umode(struct drm_display_mode *out, struct drm_mode_modeinfo *in) { out->clock = in->clock; out->hdisplay = in->hdisplay; out->hsync_start = in->hsync_start; out->hsync_end = in->hsync_end; out->htotal = in->htotal; out->hskew = in->hskew; out->vdisplay = in->vdisplay; out->vsync_start = in->vsync_start; out->vsync_end = in->vsync_end; out->vtotal = in->vtotal; out->vscan = in->vscan; out->vrefresh = in->vrefresh; out->flags = in->flags; out->type = in->type; strncpy(out->name, in->name, DRM_DISPLAY_MODE_LEN); out->name[DRM_DISPLAY_MODE_LEN-1] = 0; } /** * drm_mode_getresources - get graphics configuration * @inode: inode from the ioctl * @filp: file * from the ioctl * @cmd: cmd from ioctl * @arg: arg from ioctl * * LOCKING: * Takes mode config lock. * * Construct a set of configuration description structures and return * them to the user, including CRTC, output and framebuffer configuration. * * Called by the user via ioctl. * * RETURNS: * Zero on success, errno on failure. */ int drm_mode_getresources(struct drm_device *dev, void *data, struct drm_file *file_priv) { struct drm_mode_card_res *card_res = data; struct list_head *lh; struct drm_framebuffer *fb; struct drm_output *output; struct drm_crtc *crtc; int ret = 0; int output_count = 0; int crtc_count = 0; int fb_count = 0; int copied = 0; uint32_t __user *fb_id; uint32_t __user *crtc_id; uint32_t __user *output_id; mutex_lock(&dev->mode_config.mutex); list_for_each(lh, &dev->mode_config.fb_list) fb_count++; list_for_each(lh, &dev->mode_config.crtc_list) crtc_count++; list_for_each(lh, &dev->mode_config.output_list) output_count++; card_res->max_height = dev->mode_config.max_height; card_res->min_height = dev->mode_config.min_height; card_res->max_width = dev->mode_config.max_width; card_res->min_width = dev->mode_config.min_width; /* handle this in 4 parts */ /* FBs */ if (card_res->count_fbs >= fb_count) { copied = 0; fb_id = (uint32_t *)(unsigned long)card_res->fb_id_ptr; list_for_each_entry(fb, &dev->mode_config.fb_list, head) { if (put_user(fb->id, fb_id + copied)) { ret = -EFAULT; goto out; } copied++; } } card_res->count_fbs = fb_count; /* CRTCs */ if (card_res->count_crtcs >= crtc_count) { copied = 0; crtc_id = (uint32_t *)(unsigned long)card_res->crtc_id_ptr; list_for_each_entry(crtc, &dev->mode_config.crtc_list, head){ DRM_DEBUG("CRTC ID is %d\n", crtc->id); if (put_user(crtc->id, crtc_id + copied)) { ret = -EFAULT; goto out; } copied++; } } card_res->count_crtcs = crtc_count; /* Outputs */ if (card_res->count_outputs >= output_count) { copied = 0; output_id = (uint32_t *)(unsigned long)card_res->output_id_ptr; list_for_each_entry(output, &dev->mode_config.output_list, head) { DRM_DEBUG("OUTPUT ID is %d\n", output->id); if (put_user(output->id, output_id + copied)) { ret = -EFAULT; goto out; } copied++; } } card_res->count_outputs = output_count; DRM_DEBUG("Counted %d %d\n", card_res->count_crtcs, card_res->count_outputs); out: mutex_unlock(&dev->mode_config.mutex); return ret; } /** * drm_mode_getcrtc - get CRTC configuration * @inode: inode from the ioctl * @filp: file * from the ioctl * @cmd: cmd from ioctl * @arg: arg from ioctl * * LOCKING: * Caller? (FIXME) * * Construct a CRTC configuration structure to return to the user. * * Called by the user via ioctl. * * RETURNS: * Zero on success, errno on failure. */ int drm_mode_getcrtc(struct drm_device *dev, void *data, struct drm_file *file_priv) { struct drm_mode_crtc *crtc_resp = data; struct drm_crtc *crtc; struct drm_output *output; int ocount; int ret = 0; mutex_lock(&dev->mode_config.mutex); crtc = idr_find(&dev->mode_config.crtc_idr, crtc_resp->crtc_id); if (!crtc || (crtc->id != crtc_resp->crtc_id)) { ret = -EINVAL; goto out; } crtc_resp->x = crtc->x; crtc_resp->y = crtc->y; if (crtc->fb) crtc_resp->fb_id = crtc->fb->id; else crtc_resp->fb_id = 0; crtc_resp->outputs = 0; if (crtc->enabled) { drm_crtc_convert_to_umode(&crtc_resp->mode, &crtc->mode); crtc_resp->mode_valid = 1; ocount = 0; list_for_each_entry(output, &dev->mode_config.output_list, head) { if (output->crtc == crtc) crtc_resp->outputs |= 1 << (ocount++); } } else { crtc_resp->mode_valid = 0; } out: mutex_unlock(&dev->mode_config.mutex); return ret; } /** * drm_mode_getoutput - get output configuration * @inode: inode from the ioctl * @filp: file * from the ioctl * @cmd: cmd from ioctl * @arg: arg from ioctl * * LOCKING: * Caller? (FIXME) * * Construct a output configuration structure to return to the user. * * Called by the user via ioctl. * * RETURNS: * Zero on success, errno on failure. */ int drm_mode_getoutput(struct drm_device *dev, void *data, struct drm_file *file_priv) { struct drm_mode_get_output *out_resp = data; struct drm_output *output; struct drm_display_mode *mode; int mode_count = 0; int props_count = 0; int ret = 0; int copied = 0; int i; struct drm_mode_modeinfo u_mode; struct drm_mode_modeinfo __user *mode_ptr; uint32_t __user *prop_ptr; uint64_t __user *prop_values; memset(&u_mode, 0, sizeof(struct drm_mode_modeinfo)); DRM_DEBUG("output id %d:\n", out_resp->output); mutex_lock(&dev->mode_config.mutex); output= idr_find(&dev->mode_config.crtc_idr, out_resp->output); if (!output || (output->id != out_resp->output)) { ret = -EINVAL; goto out; } list_for_each_entry(mode, &output->modes, head) mode_count++; for (i = 0; i < DRM_OUTPUT_MAX_PROPERTY; i++) { if (output->property_ids[i] != 0) { props_count++; } } if (out_resp->count_modes == 0) { drm_crtc_probe_single_output_modes(output, dev->mode_config.max_width, dev->mode_config.max_height); } out_resp->output_type = output->output_type; out_resp->output_type_id = output->output_type_id; out_resp->mm_width = output->display_info.width_mm; out_resp->mm_height = output->display_info.height_mm; out_resp->subpixel = output->display_info.subpixel_order; out_resp->connection = output->status; if (output->crtc) out_resp->crtc = output->crtc->id; else out_resp->crtc = 0; out_resp->crtcs = output->possible_crtcs; out_resp->clones = output->possible_clones; if ((out_resp->count_modes >= mode_count) && mode_count) { copied = 0; mode_ptr = (struct drm_mode_modeinfo *)(unsigned long)out_resp->modes_ptr; list_for_each_entry(mode, &output->modes, head) { drm_crtc_convert_to_umode(&u_mode, mode); if (copy_to_user(mode_ptr + copied, &u_mode, sizeof(u_mode))) { ret = -EFAULT; goto out; } copied++; } } out_resp->count_modes = mode_count; if ((out_resp->count_props >= props_count) && props_count) { copied = 0; prop_ptr = (uint32_t *)(unsigned long)(out_resp->props_ptr); prop_values = (uint64_t *)(unsigned long)(out_resp->prop_values_ptr); for (i = 0; i < DRM_OUTPUT_MAX_PROPERTY; i++) { if (output->property_ids[i] != 0) { if (put_user(output->property_ids[i], prop_ptr + copied)) { ret = -EFAULT; goto out; } if (put_user(output->property_values[i], prop_values + copied)) { ret = -EFAULT; goto out; } copied++; } } } out_resp->count_props = props_count; out: mutex_unlock(&dev->mode_config.mutex); return ret; } /** * drm_mode_setcrtc - set CRTC configuration * @inode: inode from the ioctl * @filp: file * from the ioctl * @cmd: cmd from ioctl * @arg: arg from ioctl * * LOCKING: * Caller? (FIXME) * * Build a new CRTC configuration based on user request. * * Called by the user via ioctl. * * RETURNS: * Zero on success, errno on failure. */ int drm_mode_setcrtc(struct drm_device *dev, void *data, struct drm_file *file_priv) { struct drm_mode_crtc *crtc_req = data; struct drm_crtc *crtc, *crtcfb; struct drm_output **output_set = NULL, *output; struct drm_framebuffer *fb = NULL; struct drm_display_mode *mode = NULL; uint32_t __user *set_outputs_ptr; int ret = 0; int i; mutex_lock(&dev->mode_config.mutex); crtc = idr_find(&dev->mode_config.crtc_idr, crtc_req->crtc_id); if (!crtc || (crtc->id != crtc_req->crtc_id)) { DRM_DEBUG("Unknown CRTC ID %d\n", crtc_req->crtc_id); ret = -EINVAL; goto out; } if (crtc_req->mode_valid) { /* If we have a mode we need a framebuffer. */ /* If we pass -1, set the mode with the currently bound fb */ if (crtc_req->fb_id == -1) { list_for_each_entry(crtcfb, &dev->mode_config.crtc_list, head) { if (crtcfb == crtc) { DRM_DEBUG("Using current fb for setmode\n"); fb = crtc->fb; } } } else { fb = idr_find(&dev->mode_config.crtc_idr, crtc_req->fb_id); if (!fb || (fb->id != crtc_req->fb_id)) { DRM_DEBUG("Unknown FB ID%d\n", crtc_req->fb_id); ret = -EINVAL; goto out; } } mode = drm_mode_create(dev); drm_crtc_convert_umode(mode, &crtc_req->mode); drm_mode_set_crtcinfo(mode, CRTC_INTERLACE_HALVE_V); } if (crtc_req->count_outputs == 0 && mode) { DRM_DEBUG("Count outputs is 0 but mode set\n"); ret = -EINVAL; goto out; } if (crtc_req->count_outputs > 0 && !mode && !fb) { DRM_DEBUG("Count outputs is %d but no mode or fb set\n", crtc_req->count_outputs); ret = -EINVAL; goto out; } if (crtc_req->count_outputs > 0) { u32 out_id; /* Maybe we should check that count_outputs is a sensible value. */ output_set = kmalloc(crtc_req->count_outputs * sizeof(struct drm_output *), GFP_KERNEL); if (!output_set) { ret = -ENOMEM; goto out; } for (i = 0; i < crtc_req->count_outputs; i++) { set_outputs_ptr = (uint32_t *)(unsigned long)crtc_req->set_outputs_ptr; if (get_user(out_id, &set_outputs_ptr[i])) { ret = -EFAULT; goto out; } output = idr_find(&dev->mode_config.crtc_idr, out_id); if (!output || (out_id != output->id)) { DRM_DEBUG("Output id %d unknown\n", out_id); ret = -EINVAL; goto out; } output_set[i] = output; } } ret = drm_crtc_set_config(crtc, crtc_req, mode, output_set, fb); out: kfree(output_set); mutex_unlock(&dev->mode_config.mutex); return ret; } int drm_mode_cursor_ioctl(struct drm_device *dev, void *data, struct drm_file *file_priv) { struct drm_mode_cursor *req = data; struct drm_crtc *crtc; struct drm_buffer_object *bo = NULL; /* must be set */ int ret = 0; DRM_DEBUG("\n"); if (!req->flags) { DRM_ERROR("no operation set\n"); return -EINVAL; } mutex_lock(&dev->mode_config.mutex); crtc = idr_find(&dev->mode_config.crtc_idr, req->crtc); if (!crtc || (crtc->id != req->crtc)) { DRM_DEBUG("Unknown CRTC ID %d\n", req->crtc); ret = -EINVAL; goto out; } if (req->flags & DRM_MODE_CURSOR_BO) { /* Turn of the cursor if handle is 0 */ if (req->handle) ret = drm_get_buffer_object(dev, &bo, req->handle); if (ret) { DRM_ERROR("invalid buffer id\n"); ret = -EINVAL; goto out; } if (crtc->funcs->cursor_set) { ret = crtc->funcs->cursor_set(crtc, bo, req->width, req->height); } else { DRM_ERROR("crtc does not support cursor\n"); ret = -EFAULT; goto out; } } if (req->flags & DRM_MODE_CURSOR_MOVE) { if (crtc->funcs->cursor_move) { ret = crtc->funcs->cursor_move(crtc, req->x, req->y); } else { DRM_ERROR("crtc does not support cursor\n"); ret = -EFAULT; goto out; } } out: mutex_unlock(&dev->mode_config.mutex); return ret; } /** * drm_mode_addfb - add an FB to the graphics configuration * @inode: inode from the ioctl * @filp: file * from the ioctl * @cmd: cmd from ioctl * @arg: arg from ioctl * * LOCKING: * Takes mode config lock. * * Add a new FB to the specified CRTC, given a user request. * * Called by the user via ioctl. * * RETURNS: * Zero on success, errno on failure. */ int drm_mode_addfb(struct drm_device *dev, void *data, struct drm_file *file_priv) { struct drm_mode_fb_cmd *r = data; struct drm_mode_config *config = &dev->mode_config; struct drm_framebuffer *fb; struct drm_buffer_object *bo; int ret = 0; if ((config->min_width > r->width) || (r->width > config->max_width)) { DRM_ERROR("mode new framebuffer width not within limits\n"); return -EINVAL; } if ((config->min_height > r->height) || (r->height > config->max_height)) { DRM_ERROR("mode new framebuffer height not within limits\n"); return -EINVAL; } mutex_lock(&dev->mode_config.mutex); /* TODO check limits are okay */ ret = drm_get_buffer_object(dev, &bo, r->handle); if (ret || !bo) { DRM_ERROR("BO handle not valid\n"); ret = -EINVAL; goto out; } /* TODO check buffer is sufficently large */ /* TODO setup destructor callback */ fb = drm_framebuffer_create(dev); if (!fb) { DRM_ERROR("could not create framebuffer\n"); ret = -EINVAL; goto out; } fb->width = r->width; fb->height = r->height; fb->pitch = r->pitch; fb->bits_per_pixel = r->bpp; fb->depth = r->depth; fb->bo = bo; r->buffer_id = fb->id; list_add(&fb->filp_head, &file_priv->fbs); out: mutex_unlock(&dev->mode_config.mutex); return ret; } /** * drm_mode_rmfb - remove an FB from the configuration * @inode: inode from the ioctl * @filp: file * from the ioctl * @cmd: cmd from ioctl * @arg: arg from ioctl * * LOCKING: * Takes mode config lock. * * Remove the FB specified by the user. * * Called by the user via ioctl. * * RETURNS: * Zero on success, errno on failure. */ int drm_mode_rmfb(struct drm_device *dev, void *data, struct drm_file *file_priv) { struct drm_framebuffer *fb = NULL; struct drm_framebuffer *fbl = NULL; uint32_t *id = data; int ret = 0; int found = 0; mutex_lock(&dev->mode_config.mutex); fb = idr_find(&dev->mode_config.crtc_idr, *id); /* TODO check that we realy get a framebuffer back. */ if (!fb || (*id != fb->id)) { DRM_ERROR("mode invalid framebuffer id\n"); ret = -EINVAL; goto out; } list_for_each_entry(fbl, &file_priv->fbs, filp_head) if (fb == fbl) found = 1; if (!found) { DRM_ERROR("tried to remove a fb that we didn't own\n"); ret = -EINVAL; goto out; } /* TODO release all crtc connected to the framebuffer */ /* TODO unhock the destructor from the buffer object */ if (fb->bo->type == drm_bo_type_kernel) DRM_ERROR("the bo type should not be of kernel type\n"); list_del(&fb->filp_head); drm_framebuffer_destroy(fb); out: mutex_unlock(&dev->mode_config.mutex); return ret; } /** * drm_mode_getfb - get FB info * @inode: inode from the ioctl * @filp: file * from the ioctl * @cmd: cmd from ioctl * @arg: arg from ioctl * * LOCKING: * Caller? (FIXME) * * Lookup the FB given its ID and return info about it. * * Called by the user via ioctl. * * RETURNS: * Zero on success, errno on failure. */ int drm_mode_getfb(struct drm_device *dev, void *data, struct drm_file *file_priv) { struct drm_mode_fb_cmd *r = data; struct drm_framebuffer *fb; int ret = 0; mutex_lock(&dev->mode_config.mutex); fb = idr_find(&dev->mode_config.crtc_idr, r->buffer_id); if (!fb || (r->buffer_id != fb->id)) { DRM_ERROR("invalid framebuffer id\n"); ret = -EINVAL; goto out; } r->height = fb->height; r->width = fb->width; r->depth = fb->depth; r->bpp = fb->bits_per_pixel; r->handle = fb->bo->base.hash.key; r->pitch = fb->pitch; out: mutex_unlock(&dev->mode_config.mutex); return ret; } /** * drm_fb_release - remove and free the FBs on this file * @filp: file * from the ioctl * * LOCKING: * Takes mode config lock. * * Destroy all the FBs associated with @filp. * * Called by the user via ioctl. * * RETURNS: * Zero on success, errno on failure. */ void drm_fb_release(struct file *filp) { struct drm_file *priv = filp->private_data; struct drm_device *dev = priv->minor->dev; struct drm_framebuffer *fb, *tfb; mutex_lock(&dev->mode_config.mutex); list_for_each_entry_safe(fb, tfb, &priv->fbs, filp_head) { list_del(&fb->filp_head); if (fb->bo->type == drm_bo_type_kernel) DRM_ERROR("the bo type should not be of kernel_type, the kernel will probably explode, why Dave\n"); drm_framebuffer_destroy(fb); } mutex_unlock(&dev->mode_config.mutex); } /* * */ static int drm_mode_attachmode(struct drm_device *dev, struct drm_output *output, struct drm_display_mode *mode) { int ret = 0; list_add_tail(&mode->head, &output->user_modes); return ret; } int drm_mode_attachmode_crtc(struct drm_device *dev, struct drm_crtc *crtc, struct drm_display_mode *mode) { struct drm_output *output; int ret = 0; struct drm_display_mode *dup_mode; int need_dup = 0; list_for_each_entry(output, &dev->mode_config.output_list, head) { if (output->crtc == crtc) { if (need_dup) dup_mode = drm_mode_duplicate(dev, mode); else dup_mode = mode; ret = drm_mode_attachmode(dev, output, dup_mode); if (ret) return ret; need_dup = 1; } } return 0; } EXPORT_SYMBOL(drm_mode_attachmode_crtc); static int drm_mode_detachmode(struct drm_device *dev, struct drm_output *output, struct drm_display_mode *mode) { int found = 0; int ret = 0; struct drm_display_mode *match_mode, *t; list_for_each_entry_safe(match_mode, t, &output->user_modes, head) { if (drm_mode_equal(match_mode, mode)) { list_del(&match_mode->head); drm_mode_destroy(dev, match_mode); found = 1; break; } } if (!found) ret = -EINVAL; return ret; } int drm_mode_detachmode_crtc(struct drm_device *dev, struct drm_display_mode *mode) { struct drm_output *output; list_for_each_entry(output, &dev->mode_config.output_list, head) { drm_mode_detachmode(dev, output, mode); } return 0; } EXPORT_SYMBOL(drm_mode_detachmode_crtc); /** * drm_fb_attachmode - Attach a user mode to an output * @inode: inode from the ioctl * @filp: file * from the ioctl * @cmd: cmd from ioctl * @arg: arg from ioctl * * This attaches a user specified mode to an output. * Called by the user via ioctl. * * RETURNS: * Zero on success, errno on failure. */ int drm_mode_attachmode_ioctl(struct drm_device *dev, void *data, struct drm_file *file_priv) { struct drm_mode_mode_cmd *mode_cmd = data; struct drm_output *output; struct drm_display_mode *mode; struct drm_mode_modeinfo *umode = &mode_cmd->mode; int ret = 0; mutex_lock(&dev->mode_config.mutex); output = idr_find(&dev->mode_config.crtc_idr, mode_cmd->output_id); if (!output || (output->id != mode_cmd->output_id)) { ret = -EINVAL; goto out; } mode = drm_mode_create(dev); if (!mode) { ret = -ENOMEM; goto out; } drm_crtc_convert_umode(mode, umode); ret = drm_mode_attachmode(dev, output, mode); out: mutex_unlock(&dev->mode_config.mutex); return ret; } /** * drm_fb_detachmode - Detach a user specified mode from an output * @inode: inode from the ioctl * @filp: file * from the ioctl * @cmd: cmd from ioctl * @arg: arg from ioctl * * Called by the user via ioctl. * * RETURNS: * Zero on success, errno on failure. */ int drm_mode_detachmode_ioctl(struct drm_device *dev, void *data, struct drm_file *file_priv) { struct drm_mode_mode_cmd *mode_cmd = data; struct drm_output *output; struct drm_display_mode mode; struct drm_mode_modeinfo *umode = &mode_cmd->mode; int ret = 0; mutex_lock(&dev->mode_config.mutex); output = idr_find(&dev->mode_config.crtc_idr, mode_cmd->output_id); if (!output || (output->id != mode_cmd->output_id)) { ret = -EINVAL; goto out; } drm_crtc_convert_umode(&mode, umode); ret = drm_mode_detachmode(dev, output, &mode); out: mutex_unlock(&dev->mode_config.mutex); return ret; } struct drm_property *drm_property_create(struct drm_device *dev, int flags, const char *name, int num_values) { struct drm_property *property = NULL; property = kzalloc(sizeof(struct drm_property), GFP_KERNEL); if (!property) return NULL; if (num_values) { property->values = kzalloc(sizeof(uint64_t)*num_values, GFP_KERNEL); if (!property->values) goto fail; } property->id = drm_idr_get(dev, property); property->flags = flags; property->num_values = num_values; INIT_LIST_HEAD(&property->enum_blob_list); if (name) strncpy(property->name, name, DRM_PROP_NAME_LEN); list_add_tail(&property->head, &dev->mode_config.property_list); return property; fail: kfree(property); return NULL; } EXPORT_SYMBOL(drm_property_create); int drm_property_add_enum(struct drm_property *property, int index, uint64_t value, const char *name) { struct drm_property_enum *prop_enum; if (!(property->flags & DRM_MODE_PROP_ENUM)) return -EINVAL; if (!list_empty(&property->enum_blob_list)) { list_for_each_entry(prop_enum, &property->enum_blob_list, head) { if (prop_enum->value == value) { strncpy(prop_enum->name, name, DRM_PROP_NAME_LEN); prop_enum->name[DRM_PROP_NAME_LEN-1] = '\0'; return 0; } } } prop_enum = kzalloc(sizeof(struct drm_property_enum), GFP_KERNEL); if (!prop_enum) return -ENOMEM; strncpy(prop_enum->name, name, DRM_PROP_NAME_LEN); prop_enum->name[DRM_PROP_NAME_LEN-1] = '\0'; prop_enum->value = value; property->values[index] = value; list_add_tail(&prop_enum->head, &property->enum_blob_list); return 0; } EXPORT_SYMBOL(drm_property_add_enum); void drm_property_destroy(struct drm_device *dev, struct drm_property *property) { struct drm_property_enum *prop_enum, *pt; list_for_each_entry_safe(prop_enum, pt, &property->enum_blob_list, head) { list_del(&prop_enum->head); kfree(prop_enum); } if (property->num_values) kfree(property->values); drm_idr_put(dev, property->id); list_del(&property->head); kfree(property); } EXPORT_SYMBOL(drm_property_destroy); int drm_output_attach_property(struct drm_output *output, struct drm_property *property, uint64_t init_val) { int i; for (i = 0; i < DRM_OUTPUT_MAX_PROPERTY; i++) { if (output->property_ids[i] == 0) { output->property_ids[i] = property->id; output->property_values[i] = init_val; break; } } if (i == DRM_OUTPUT_MAX_PROPERTY) return -EINVAL; return 0; } EXPORT_SYMBOL(drm_output_attach_property); int drm_output_property_set_value(struct drm_output *output, struct drm_property *property, uint64_t value) { int i; for (i = 0; i < DRM_OUTPUT_MAX_PROPERTY; i++) { if (output->property_ids[i] == property->id) { output->property_values[i] = value; break; } } if (i == DRM_OUTPUT_MAX_PROPERTY) return -EINVAL; return 0; } EXPORT_SYMBOL(drm_output_property_set_value); int drm_output_property_get_value(struct drm_output *output, struct drm_property *property, uint64_t *val) { int i; for (i = 0; i < DRM_OUTPUT_MAX_PROPERTY; i++) { if (output->property_ids[i] == property->id) { *val = output->property_values[i]; break; } } if (i == DRM_OUTPUT_MAX_PROPERTY) return -EINVAL; return 0; } EXPORT_SYMBOL(drm_output_property_get_value); int drm_mode_getproperty_ioctl(struct drm_device *dev, void *data, struct drm_file *file_priv) { struct drm_mode_get_property *out_resp = data; struct drm_property *property; int enum_count = 0; int blob_count = 0; int value_count = 0; int ret = 0, i; int copied; struct drm_property_enum *prop_enum; struct drm_mode_property_enum __user *enum_ptr; struct drm_property_blob *prop_blob; uint32_t *blob_id_ptr; uint64_t __user *values_ptr; uint32_t __user *blob_length_ptr; mutex_lock(&dev->mode_config.mutex); property = idr_find(&dev->mode_config.crtc_idr, out_resp->prop_id); if (!property || (property->id != out_resp->prop_id)) { ret = -EINVAL; goto done; } if (property->flags & DRM_MODE_PROP_ENUM) { list_for_each_entry(prop_enum, &property->enum_blob_list, head) enum_count++; } else if (property->flags & DRM_MODE_PROP_BLOB) { list_for_each_entry(prop_blob, &property->enum_blob_list, head) blob_count++; } value_count = property->num_values; strncpy(out_resp->name, property->name, DRM_PROP_NAME_LEN); out_resp->name[DRM_PROP_NAME_LEN-1] = 0; out_resp->flags = property->flags; if ((out_resp->count_values >= value_count) && value_count) { values_ptr = (uint64_t *)(unsigned long)out_resp->values_ptr; for (i = 0; i < value_count; i++) { if (copy_to_user(values_ptr + i, &property->values[i], sizeof(uint64_t))) { ret = -EFAULT; goto done; } } } out_resp->count_values = value_count; if (property->flags & DRM_MODE_PROP_ENUM) { if ((out_resp->count_enum_blobs >= enum_count) && enum_count) { copied = 0; enum_ptr = (struct drm_mode_property_enum *)(unsigned long)out_resp->enum_blob_ptr; list_for_each_entry(prop_enum, &property->enum_blob_list, head) { if (copy_to_user(&enum_ptr[copied].value, &prop_enum->value, sizeof(uint64_t))) { ret = -EFAULT; goto done; } if (copy_to_user(&enum_ptr[copied].name, &prop_enum->name, DRM_PROP_NAME_LEN)) { ret = -EFAULT; goto done; } copied++; } } out_resp->count_enum_blobs = enum_count; } if (property->flags & DRM_MODE_PROP_BLOB) { if ((out_resp->count_enum_blobs >= blob_count) && blob_count) { copied = 0; blob_id_ptr = (uint32_t *)(unsigned long)out_resp->enum_blob_ptr; blob_length_ptr = (uint32_t *)(unsigned long)out_resp->values_ptr; list_for_each_entry(prop_blob, &property->enum_blob_list, head) { if (put_user(prop_blob->id, blob_id_ptr + copied)) { ret = -EFAULT; goto done; } if (put_user(prop_blob->length, blob_length_ptr + copied)) { ret = -EFAULT; goto done; } copied++; } } out_resp->count_enum_blobs = enum_count; } done: mutex_unlock(&dev->mode_config.mutex); return ret; } static struct drm_property_blob *drm_property_create_blob(struct drm_device *dev, int length, void *data) { struct drm_property_blob *blob; if (!length || !data) return NULL; blob = kzalloc(sizeof(struct drm_property_blob)+length, GFP_KERNEL); if (!blob) return NULL; blob->data = (void *)((char *)blob + sizeof(struct drm_property_blob)); blob->length = length; memcpy(blob->data, data, length); blob->id = drm_idr_get(dev, blob); list_add_tail(&blob->head, &dev->mode_config.property_blob_list); return blob; } static void drm_property_destroy_blob(struct drm_device *dev, struct drm_property_blob *blob) { drm_idr_put(dev, blob->id); list_del(&blob->head); kfree(blob); } int drm_mode_getblob_ioctl(struct drm_device *dev, void *data, struct drm_file *file_priv) { struct drm_mode_get_blob *out_resp = data; struct drm_property_blob *blob; int ret = 0; void *blob_ptr; mutex_lock(&dev->mode_config.mutex); blob = idr_find(&dev->mode_config.crtc_idr, out_resp->blob_id); if (!blob || (blob->id != out_resp->blob_id)) { ret = -EINVAL; goto done; } if (out_resp->length == blob->length) { blob_ptr = (void *)(unsigned long)out_resp->data; if (copy_to_user(blob_ptr, blob->data, blob->length)){ ret = -EFAULT; goto done; } } out_resp->length = blob->length; done: mutex_unlock(&dev->mode_config.mutex); return ret; } int drm_mode_output_update_edid_property(struct drm_output *output, struct edid *edid) { struct drm_device *dev = output->dev; int ret = 0; if (output->edid_blob_ptr) drm_property_destroy_blob(dev, output->edid_blob_ptr); output->edid_blob_ptr = drm_property_create_blob(output->dev, 128, edid); ret = drm_output_property_set_value(output, dev->mode_config.edid_property, output->edid_blob_ptr->id); return ret; } EXPORT_SYMBOL(drm_mode_output_update_edid_property); int drm_mode_output_property_set_ioctl(struct drm_device *dev, void *data, struct drm_file *file_priv) { struct drm_mode_output_set_property *out_resp = data; struct drm_property *property; struct drm_output *output; int ret = -EINVAL; int i; mutex_lock(&dev->mode_config.mutex); output = idr_find(&dev->mode_config.crtc_idr, out_resp->output_id); if (!output || (output->id != out_resp->output_id)) { goto out; } for (i = 0; i < DRM_OUTPUT_MAX_PROPERTY; i++) { if (output->property_ids[i] == out_resp->prop_id) break; } if (i == DRM_OUTPUT_MAX_PROPERTY) { goto out; } property = idr_find(&dev->mode_config.crtc_idr, out_resp->prop_id); if (!property || (property->id != out_resp->prop_id)) { goto out; } if (property->flags & DRM_MODE_PROP_IMMUTABLE) goto out; if (property->flags & DRM_MODE_PROP_RANGE) { if (out_resp->value < property->values[0]) goto out; if (out_resp->value > property->values[1]) goto out; } else { int found = 0; for (i = 0; i < property->num_values; i++) { if (property->values[i] == out_resp->value) { found = 1; break; } } if (!found) { goto out; } } if (output->funcs->set_property) ret = output->funcs->set_property(output, property, out_resp->value); out: mutex_unlock(&dev->mode_config.mutex); return ret; } int drm_mode_replacefb(struct drm_device *dev, void *data, struct drm_file *file_priv) { struct drm_mode_fb_cmd *r = data; struct drm_framebuffer *fb; struct drm_crtc *crtc; struct drm_buffer_object *bo; int found = 0; struct drm_framebuffer *fbl = NULL; int ret = 0; /* right replace the current bo attached to this fb with a new bo */ mutex_lock(&dev->mode_config.mutex); ret = drm_get_buffer_object(dev, &bo, r->handle); if (ret || !bo) { ret = -EINVAL; goto out; } fb = idr_find(&dev->mode_config.crtc_idr, r->buffer_id); if (!fb || (r->buffer_id != fb->id)) { ret = -EINVAL; goto out; } list_for_each_entry(fbl, &file_priv->fbs, filp_head) if (fb == fbl) found = 1; if (!found) { DRM_ERROR("tried to replace an fb we didn't own\n"); ret = -EINVAL; goto out; } if (fb->bo->type == drm_bo_type_kernel) DRM_ERROR("the bo should not be a kernel bo\n"); fb->bo = bo; /* find all crtcs connected to this fb */ list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) { if (crtc->fb->id == r->buffer_id) { crtc->funcs->mode_set_base(crtc, crtc->x, crtc->y); } } out: mutex_unlock(&dev->mode_config.mutex); return ret; }