Age | Commit message (Collapse) | Author |
|
Now that there are render nodes it doesn't seem appropriate for the type of
the card nodes to be DRM_NODE_RENDER. For this reason, rename this type to
DRM_NODE_PRIMARY as this name better represents the purpose of these nodes.
Signed-off-by: Frank Binns <frank.binns@imgtec.com>
Reviewed-by: Rob Clark <robdclark@gmail.com>
|
|
The modetest application uses libkms to allocate dumb buffers, leading
to overallocation due to the hardcoded 32 bpp value. This can even cause
failures in drivers when the resulting pitch is too large for the
hardware to handle and gets rejected by the driver when creating the
frame buffer.
Fix this by computing the required bpp value and allocating dumb buffers
directly without going through libkms.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
This test opens a device, dumps the version information and checks that
a Tegra DRM context can be opened on it.
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
Add the libdrm_tegra helper library to encapsulate Tegra-specific
interfaces to the DRM.
Furthermore, Tegra is added to the list of supported chips in the
modetest and vbltest programs.
Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
Signed-off-by: Erik Faye-Lund <kusmabite@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
Signed-off-by: Rob Clark <robclark@freedesktop.org>
|
|
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Rob Clark <robclark@freedesktop.org>
|
|
Make upper-left corner for RGB32 buffers translucent, for testing
blending of AR24 vs XR24.
Signed-off-by: Rob Clark <robclark@freedesktop.org>
|
|
A small program that allows us to see and modify properties.
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Rob Clark <robclark@freedesktop.org>
|
|
Minimal support, so we can at least dump properties of primary/cursor
planes.
Signed-off-by: Rob Clark <robclark@freedesktop.org>
|
|
This fixes an issue when trying to use -v and -C together. When trying
to read the page flip event, we are interrupted by the SIGALRM that
comes in, and so we think we timed out when we simply got EINTR. While
we could just loop checking for EINTR, SIGALRM is just bad idea to
begin with, so just rewrite it to use a thread.
Signed-off-by: Rob Clark <robclark@freedesktop.org>
|
|
Signed-off-by: Rob Clark <robdclark@gmail.com>
|
|
Autotools is already smart enough to pick the *.pc.in files but it
needs some help with the Android.mk ones.
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Jakob Bornecrantz <jakob@vmware.com>
|
|
Reviewed-by: Jakob Bornecrantz <jakob@vmware.com>
|
|
v2: include modetest rather than modeset.
Spotted by Mauro Rossi and Paulo Sergio.
Cc: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Jakob Bornecrantz <jakob@vmware.com> (v1)
|
|
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Jakob Bornecrantz <jakob@vmware.com>
|
|
... rather than explicitly redefining HAVE_STDINT_H and _GNU_SOURCE.
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
|
|
This prevents a build failure.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@canonical.com>
|
|
unistd.h for close() and xf86drm.h for drmOpen().
Signed-off-by: Thomas Klausner <wiz@NetBSD.org>
|
|
The first parameter should be the drm fd, second param is the fb id.
Signed-off-by: Daniel Kurtz <djkurtz@chromium.org>
Acked-by: Inki Dae <inki.dae@samsung.com>
|
|
This looks like it was copied from kmstest, but isn't needed, and doesn't
actually work since exynos_fimg2d_test requires parameters.
Signed-off-by: Daniel Kurtz <djkurtz@chromium.org>
Acked-by: Inki Dae <inki.dae@samsung.com>
|
|
This exynos test was added just before HAVE_INSTALL_TESTS, and so didn't
get this annotation.
Signed-off-by: Daniel Kurtz <djkurtz@chromium.org>
Acked-by: Inki Dae <inki.dae@samsung.com>
|
|
Signed-off-by: Rob Clark <robclark@freedesktop.org>
|
|
drmFreeVersion() frees the memory allocated for the name, date and desc
fields in addition to that for the struct _drmVersion.
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
These functions all take a format string and either a list of variable
arguments or a va_list. Use the new DRM_PRINTFLIKE macro to tell the
compiler about it so that the arguments can be checked against the
format string.
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
Use same names as the kernel, makes it easier to identify
connectors in the common case.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Rob Clark <robdclark@gmail.com>
|
|
When mode is selected we only give the name of the mode as parameter.
But sometime, two different modes have the same name but not
the same vrefresh frequency.
This patch give the possibility to select a mode by its name
and optionally by its refresh frequency.
Signed-off-by: Vincent Abriou <vincent.abriou@st.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Rob Clark <robclark@freedesktop.org>
|
|
In this patch, to support exynos for KMS, Exynos KMS driver is newly added.
Also, Exynos is added to the list of kmstest supported modules.
Signed-off-by: Hyungwon Hwang <human.hwang@samsung.com>
Signed-off-by: Rob Clark <robclark@freedesktop.org>
|
|
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Rob Clark <robdclark@gmail.com>
|
|
This is helpful for differentiating between multiple devices that use
the same module.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Rob Clark <robdclark@gmail.com>
|
|
The compiler is unaware of that we have at least one crts/connector/plane
thus it complains that some of our variables will be used uninitialised.
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Rob Clark <robdclark@gmail.com>
|
|
Prodives memset() and strlen(), used in tests/setversion
tests/getversion respectively.
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Rob Clark <robdclark@gmail.com>
|
|
Signed-off-by: Rob Clark <robclark@freedesktop.org>
|
|
Multiple the image height by 1.5 for NV12/NV21 and by 2 for NV16/NV61 to
make room for the chroma plane.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The line stride passed to the function is expressed in bytes, there's no
need to multiply it by 2.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
When building the pipeline, instead of using only the encoders attached
to a connector, take all possible encoders into account to locate a
CRTC.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The -s argument can now take a list of connectors. Configure all of them
in cloned mode using a single CRTC.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
This prepares the code for handling multiple connectors in a single
pipeline in a cloned configuration.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
There's not reason to require setting a mode to test planes. Split the
two operations.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Planes are associated with CRTCs, not connectors. Don't try to be too
clever, use the CRTC ID in the -P option. This prepares for splitting
CRTC and planes setup.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
This prepares the code for the split in separate functions of CRTC and
planes setup.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
This prepares the code for the split in separate functions of CRTC and
planes setup.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The field is no needed, make it a local variable where used.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Instead of passing the device fd and resources as global variables group
them in a device structure and pass it explictly to all functions that
need it.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The argument isn't used, remove it.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
As modetest automatically selects an unused plan, providing the plane ID
allows modifying plane properties for the selected planes.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Extend the -P option to allow specifying the plane x and y offsets. The
position is optional, if not specified the plane will be positioned at
the center of the screen as before.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The -w parameter can be used to set a property value from the command
line, using the target object ID and the property name.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Configuring mode on more than two connectors or two planes is perfectly
valid. Support it.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Instead of retrieving resources as they are needed, retrieve them all
(except property blobs) in one go at startup.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|