summaryrefslogtreecommitdiff
path: root/tests
AgeCommit message (Collapse)Author
2013-09-11modetest: allow setting a scaling factor when showing planeIlia Mirkin
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu> Reviewed-by: Rob Clark <robdclark@gmail.com>
2013-09-11modetest: add a -D option to specify a device to be usedIlia Mirkin
This is helpful for differentiating between multiple devices that use the same module. Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu> Reviewed-by: Rob Clark <robdclark@gmail.com>
2013-08-30tests/modetest: silence compiler warning about uninitialised variablesEmil Velikov
The compiler is unaware of that we have at least one crts/connector/plane thus it complains that some of our variables will be used uninitialised. Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com> Reviewed-by: Rob Clark <robdclark@gmail.com>
2013-08-30tests/*version: add missing string.h headerEmil Velikov
Prodives memset() and strlen(), used in tests/setversion tests/getversion respectively. Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com> Reviewed-by: Rob Clark <robdclark@gmail.com>
2013-08-30tests: add msmRob Clark
Signed-off-by: Rob Clark <robclark@freedesktop.org>
2013-08-05modetest: Allocate NV buffers large enough for the two planesLaurent Pinchart
Multiple the image height by 1.5 for NV12/NV21 and by 2 for NV16/NV61 to make room for the chroma plane. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2013-08-05modetest: Fix line stride in SMPTE YUV packet pattern generatorLaurent Pinchart
The line stride passed to the function is expressed in bytes, there's no need to multiply it by 2. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2013-08-05modetest: Try all possible encoders for a connectorLaurent Pinchart
When building the pipeline, instead of using only the encoders attached to a connector, take all possible encoders into account to locate a CRTC. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2013-08-05modetest: Support pipes with multiple connectorsLaurent Pinchart
The -s argument can now take a list of connectors. Configure all of them in cloned mode using a single CRTC. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2013-08-05modetest: Rename struct connector_arg to struct pipe_argLaurent Pinchart
This prepares the code for handling multiple connectors in a single pipeline in a cloned configuration. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2013-08-05modetest: Split mode setting and plane setupLaurent Pinchart
There's not reason to require setting a mode to test planes. Split the two operations. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2013-08-05modetest: Give the CRTC ID to the -P optionLaurent Pinchart
Planes are associated with CRTCs, not connectors. Don't try to be too clever, use the CRTC ID in the -P option. This prepares for splitting CRTC and planes setup. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2013-08-05modetest: Store the mode in the crtc structureLaurent Pinchart
This prepares the code for the split in separate functions of CRTC and planes setup. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2013-08-05modetest: Store the crtc in the connector_arg structureLaurent Pinchart
This prepares the code for the split in separate functions of CRTC and planes setup. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2013-08-05modetest: Remove the struct connector_arg encoder fieldLaurent Pinchart
The field is no needed, make it a local variable where used. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2013-08-05modetest: Compute CRTC pipe number as neededLaurent Pinchart
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2013-08-05modetest: Create a device structureLaurent Pinchart
Instead of passing the device fd and resources as global variables group them in a device structure and pass it explictly to all functions that need it. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2013-08-05modetest: Remove the -m argumentLaurent Pinchart
The argument isn't used, remove it. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2013-08-05modetest: Print the plane ID when setting up a planeLaurent Pinchart
As modetest automatically selects an unused plan, providing the plane ID allows modifying plane properties for the selected planes. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2013-08-05modetest: Allow specifying plane positionLaurent Pinchart
Extend the -P option to allow specifying the plane x and y offsets. The position is optional, if not specified the plane will be positioned at the center of the screen as before. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2013-08-05modetest: Add a command line parameter to set propertiesLaurent Pinchart
The -w parameter can be used to set a property value from the command line, using the target object ID and the property name. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2013-08-05modetest: Don't limit mode set and planes to two instancesLaurent Pinchart
Configuring mode on more than two connectors or two planes is perfectly valid. Support it. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2013-08-05modetest: Retrieve all resources in one goLaurent Pinchart
Instead of retrieving resources as they are needed, retrieve them all (except property blobs) in one go at startup. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2013-08-05modetest: Add a command line parameter to drop master after mode setLaurent Pinchart
If the -d parameter is specified, modetest will drop master permissions after setting the mode. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2013-08-05modetest: Add a command line parameter to select the driverLaurent Pinchart
If the -M parameter is specified, modetest will use the requested device name instead of trying its builtin list of device names. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com>
2013-08-05modetest: Sort command line argumentsLaurent Pinchart
The current mostly random sort order hinders code readability. Sort the options alphabetically in the code, and by group in the help message. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com>
2013-08-05modetest: Remove extern declarations of opt(arg|ind|err|opt)Laurent Pinchart
Those variables are declared in unistd.h, there's no need to redeclare them here. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com>
2013-08-05modetest: Fix warningsLaurent Pinchart
Enable all standard automake warnings except for -Wpointer-arith (as the test pattern generation code uses void pointer arithmetics) and fix them. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2013-08-01tests: add tilcdc to modetest/vbltestRob Clark
Signed-off-by: Rob Clark <robclark@freedesktop.org>
2013-05-22modetest: Make RGB565 pwetty tooVille Syrjälä
Render the crosshairs for 565 and x888/a888 formats. v2: Use the drm format to determine cairo format Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
2013-04-18modetest: Add YUV420 support and fix YVU420 Cb/Cr orderingVille Syrjälä
YUV420 support is trivial to add since the code already supports YVU420. But it looks like the YVU420 support is a bit broken. The chroma planes are passed in the wrong order to the fill functions, so fix that while were at it. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
2013-04-18modetest: Pass format_info to fill_tiles functionsVille Syrjälä
The fourcc is inside the format_info structure, so if we want to use it inside the various fill_tiles functions, we need to pass down the whole format_info, not just the rgb/yuv infos. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2013-04-18modetest: Reduce the length of the connector type stringVille Syrjälä
Spelling out eDP or DP make for a ridicilously long string which plays havoc with formatting. Just say eDP or DP. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2013-04-18modetest: Print possible_crtcs for planesVille Syrjälä
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2013-04-18modetest: Add support for all 16/32 bpp RGB formatsVille Syrjälä
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2013-04-18modetest: Fix pitches, somewhatVille Syrjälä
libkms only has the xrgb8888 format, so we're overallocating the bo by quite a lot in some cases. But we still need to get the pitch from the libkms since it's the driver that decides how to align it. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2013-03-26tests: allow tests programs to be installed (cumulative patch)Benjamin Gaignard
fix error in previous patch Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.com> Signed-off-by: Andreas Boll <andreas.boll.dev@gmail.com>
2013-03-25tests: allow tests programs to be installedBenjamin Gaignard
Install test programs is useful in cross compilation case. By default the behavior is the same and test programs aren't installed in $bindir. If --enable-install-test-programs is set then test programs are installed in $bindir. Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
2013-03-08libdrm/exynos: add test application for 2d gpu.Inki Dae
This patch adds library and test application for g2d gpu(fimg2d). The fimg2d hardware is a 2D graphics accelerator(G2D) that supports Bit Block Transfer(BitBLT). The library includes the following primitive drawing operations: .solid fill - This operation fills the given buffer with the given color data. .copy - This operation copies contents in source buffer to destination buffer. .copy_with_scale - This operation copies contents in source buffer to destination buffer scaling up or down properly. .blend - This operation blends contents in source buffer with the ones in destination buffer. And the above operations uses gem handle or user space address allocated by malloc() as source or destination buffer. And the test application includes just simple primitive drawing tests with the above library. And the guide to test is as the following, "#exynos_fimg2d_test -s connector_id@crtc_id:mode" With this above simple command, four primitive drawing operations would be called step by step and also rendered on the output device to the given connector and crtc id. Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Rob Clark <robdclark@gmail.com>
2012-10-08configure.ac: Allow forcible disabling of Cairo supportDaniel Stone
We don't want to build libdrm tests with Cairo support under Poky, since they're never used and also cause a build loop from libdrm -> cairo -> mesa-dri -> libdrm. To avoid variance in build results, introduce a --disable-cairo-tests switch. Signed-off-by: Daniel Stone <daniel@fooishbar.org> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-08-12tests/modetest: Add a forgotten return, needed for opensuse buildserviceTobias Klausmann
Signed-off-by: Marek Olšák <maraeo@gmail.com>
2012-08-11tests/modetest: fix distcheckMarek Olšák
2012-07-23modetest: fix uninitialized fourccRob Clark
If color format for CRTC layer is not specified on commandline, then c->fourcc is unintialized resulting in addfb call failing. Signed-off-by: Rob Clark <rob@ti.com>
2012-07-20modeset: Split buffer allocation to a separate fileLaurent Pinchart
As the modeset test application is often referred to as an example of the KMS API usage, move test pattern generation and buffer allocation to a separate file to keep it simple and clear. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2012-07-20modetest: Make frame buffer format configurable on the command lineLaurent Pinchart
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2012-07-20modetest: Move connector and plane parsing to separate functionsLaurent Pinchart
This will make it easier to add additional parameters to the connector and plane arguments. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2012-07-20modetest: Add test pattern support for missing RGB formatsLaurent Pinchart
Implement tiles and SMPTE test pattern generation for the RGB565, BGR888, RGB888, ARGB8888, BGRA8888 and BGRX8888 formats. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2012-07-20modetest: Add test pattern support for missing planar YUV formatsLaurent Pinchart
Implement tiles and SMPTE test pattern generation for the NV12, NV21, NV16 and NV61 formats. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2012-07-20modetest: Add test pattern support for missing packed YUV formatsLaurent Pinchart
Implement tiles and SMPTE test pattern generation for the UYVY, VYUY and YVYU formats. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2012-07-20modetest: Add SMPTE test patternLaurent Pinchart
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>