summaryrefslogtreecommitdiff
path: root/tests/modetest
AgeCommit message (Collapse)Author
2013-06-27modetest: connect source to planeliveLaurent Pinchart
2013-06-27modetest: setup sourceLaurent Pinchart
2013-06-27modetest: dump sourcesLaurent Pinchart
2013-06-27modetest: Allocate NV buffers large enough for the two planesLaurent Pinchart
Multiple the image height by 1.5 for NV12/NV21 and by 2 for NV16/NV61 to make room for the chroma plane. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2013-06-27modetest: Fix line stride in SMPTE YUV packet pattern generatorLaurent Pinchart
The line stride passed to the function is expressed in bytes, there's no need to multiply it by 2. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2013-06-27modetest: Try all possible encoders for a connectorLaurent Pinchart
When building the pipeline, instead of using only the encoders attached to a connector, take all possible encoders into account to locate a CRTC. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2013-06-27modetest: Support pipes with multiple connectorsLaurent Pinchart
The -s argument can now take a list of connectors. Configure all of them in cloned mode using a single CRTC. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2013-06-27modetest: Rename struct connector_arg to struct pipe_argLaurent Pinchart
This prepares the code for handling multiple connectors in a single pipeline in a cloned configuration. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2013-06-27modetest: Split mode setting and plane setupLaurent Pinchart
There's not reason to require setting a mode to test planes. Split the two operations. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2013-06-27modetest: Give the CRTC ID to the -P optionLaurent Pinchart
Planes are associated with CRTCs, not connectors. Don't try to be too clever, use the CRTC ID in the -P option. This prepares for splitting CRTC and planes setup. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2013-06-27modetest: Store the mode in the crtc structureLaurent Pinchart
This prepares the code for the split in separate functions of CRTC and planes setup. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2013-06-27modetest: Store the crtc in the connector_arg structureLaurent Pinchart
This prepares the code for the split in separate functions of CRTC and planes setup. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2013-06-27modetest: Remove the struct connector_arg encoder fieldLaurent Pinchart
The field is no needed, make it a local variable where used. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2013-06-27modetest: Compute CRTC pipe number as neededLaurent Pinchart
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2013-06-27modetest: Create a device structureLaurent Pinchart
Instead of passing the device fd and resources as global variables group them in a device structure and pass it explictly to all functions that need it. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2013-06-27modetest: Remove the -m argumentLaurent Pinchart
The argument isn't used, remove it. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2013-06-27modetest: Print the plane ID when setting up a planeLaurent Pinchart
As modetest automatically selects an unused plan, providing the plane ID allows modifying plane properties for the selected planes. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2013-06-27modetest: Allow specifying plane positionLaurent Pinchart
Extend the -P option to allow specifying the plane x and y offsets. The position is optional, if not specified the plane will be positioned at the center of the screen as before. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2013-06-27modetest: Add a command line parameter to set propertiesLaurent Pinchart
The -w parameter can be used to set a property value from the command line, using the target object ID and the property name. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2013-06-27modetest: Don't limit mode set and planes to two instancesLaurent Pinchart
Configuring mode on more than two connectors or two planes is perfectly valid. Support it. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2013-06-27modetest: Retrieve all resources in one goLaurent Pinchart
Instead of retrieving resources as they are needed, retrieve them all (except property blobs) in one go at startup. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2013-06-27modetest: Add a command line parameter to drop master after mode setLaurent Pinchart
If the -d parameter is specified, modetest will drop master permissions after setting the mode. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2013-06-27modetest: Add a command line parameter to select the driverLaurent Pinchart
If the -M parameter is specified, modetest will use the requested device name instead of trying its builtin list of device names. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com>
2013-06-27modetest: Sort command line argumentsLaurent Pinchart
The current mostly random sort order hinders code readability. Sort the options alphabetically in the code, and by group in the help message. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com>
2013-06-27modetest: Remove extern declarations of opt(arg|ind|err|opt)Laurent Pinchart
Those variables are declared in unistd.h, there's no need to redeclare them here. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com>
2013-06-27modetest: Fix warningsLaurent Pinchart
Enable all standard automake warnings except for -Wpointer-arith (as the test pattern generation code uses void pointer arithmetics) and fix them. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2013-05-22modetest: Make RGB565 pwetty tooVille Syrjälä
Render the crosshairs for 565 and x888/a888 formats. v2: Use the drm format to determine cairo format Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
2013-04-18modetest: Add YUV420 support and fix YVU420 Cb/Cr orderingVille Syrjälä
YUV420 support is trivial to add since the code already supports YVU420. But it looks like the YVU420 support is a bit broken. The chroma planes are passed in the wrong order to the fill functions, so fix that while were at it. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
2013-04-18modetest: Pass format_info to fill_tiles functionsVille Syrjälä
The fourcc is inside the format_info structure, so if we want to use it inside the various fill_tiles functions, we need to pass down the whole format_info, not just the rgb/yuv infos. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2013-04-18modetest: Reduce the length of the connector type stringVille Syrjälä
Spelling out eDP or DP make for a ridicilously long string which plays havoc with formatting. Just say eDP or DP. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2013-04-18modetest: Print possible_crtcs for planesVille Syrjälä
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2013-04-18modetest: Add support for all 16/32 bpp RGB formatsVille Syrjälä
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2013-04-18modetest: Fix pitches, somewhatVille Syrjälä
libkms only has the xrgb8888 format, so we're overallocating the bo by quite a lot in some cases. But we still need to get the pitch from the libkms since it's the driver that decides how to align it. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2013-03-25tests: allow tests programs to be installedBenjamin Gaignard
Install test programs is useful in cross compilation case. By default the behavior is the same and test programs aren't installed in $bindir. If --enable-install-test-programs is set then test programs are installed in $bindir. Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
2012-10-08configure.ac: Allow forcible disabling of Cairo supportDaniel Stone
We don't want to build libdrm tests with Cairo support under Poky, since they're never used and also cause a build loop from libdrm -> cairo -> mesa-dri -> libdrm. To avoid variance in build results, introduce a --disable-cairo-tests switch. Signed-off-by: Daniel Stone <daniel@fooishbar.org> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-08-12tests/modetest: Add a forgotten return, needed for opensuse buildserviceTobias Klausmann
Signed-off-by: Marek Olšák <maraeo@gmail.com>
2012-08-11tests/modetest: fix distcheckMarek Olšák
2012-07-23modetest: fix uninitialized fourccRob Clark
If color format for CRTC layer is not specified on commandline, then c->fourcc is unintialized resulting in addfb call failing. Signed-off-by: Rob Clark <rob@ti.com>
2012-07-20modeset: Split buffer allocation to a separate fileLaurent Pinchart
As the modeset test application is often referred to as an example of the KMS API usage, move test pattern generation and buffer allocation to a separate file to keep it simple and clear. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2012-07-20modetest: Make frame buffer format configurable on the command lineLaurent Pinchart
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2012-07-20modetest: Move connector and plane parsing to separate functionsLaurent Pinchart
This will make it easier to add additional parameters to the connector and plane arguments. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2012-07-20modetest: Add test pattern support for missing RGB formatsLaurent Pinchart
Implement tiles and SMPTE test pattern generation for the RGB565, BGR888, RGB888, ARGB8888, BGRA8888 and BGRX8888 formats. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2012-07-20modetest: Add test pattern support for missing planar YUV formatsLaurent Pinchart
Implement tiles and SMPTE test pattern generation for the NV12, NV21, NV16 and NV61 formats. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2012-07-20modetest: Add test pattern support for missing packed YUV formatsLaurent Pinchart
Implement tiles and SMPTE test pattern generation for the UYVY, VYUY and YVYU formats. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2012-07-20modetest: Add SMPTE test patternLaurent Pinchart
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2012-07-20modetest: Unify buffer allocationLaurent Pinchart
Merge the create_test_buffer() and create_grey_buffer() functions into a single buffer allocation function that takes the pixel format and fill pattern as parameters. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2012-06-28modetest: Dump bit field namesKristian Høgsberg
2012-06-08modetest: support plane propertiesRob Clark
Add support to display plane properties. Signed-off-by: Rob Clark <rob@ti.com> Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
2012-06-08modetest: support bitmask propertiesRob Clark
Add support to display bitmask properties. Signed-off-by: Rob Clark <rob@ti.com> Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
2012-06-08modetest: print CRTC propertiesPaulo Zanoni
Reviewed-by: Eugeni Dodonov <eugeni.dodonov@intel.com> Reviewed-by: Rob Clark <rob@ti.com> Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-07-03 10:54:12 +0000