summaryrefslogtreecommitdiff
path: root/shared-core
AgeCommit message (Collapse)Author
2008-06-15radeon: actualy try to fix the corruptionJerome Glisse
2008-06-15radeon: fix screen corruption introduced by last patchJerome Glisse
2008-06-13[intel-gem] throttle based on frames rather than time. Reduces jitter.Keith Packard
Record the last execbuffer sequence for each client. Record that sequence in the throttle ioctl as the 'throttle sequence'. Wait for the last throttle sequence in the throttle ioctl.
2008-06-13[intel] Enable MSI for i915 IRQKeith Packard
2008-06-13[intel] Restructure irq to pend all work until after iir write.Keith Packard
The interrupt identity register must be writen before any work occurs lest we drop an interrupt on the floor. This patch just shuffles code around to make sure that IIR is written as early as possible.
2008-06-13[intel-gem] Use a delayed_work instead of a timer + work_structKeith Packard
We want request retirement to occur about once a second when the request queue is non-empty. This was done with a timer that queued a work_struct, using a delayed_work instead makes a lot more sense.
2008-06-13Fix i915_wait_irq in the presence of interrupt masking.Eric Anholt
In the short-circuit code for the breadcrumb already being new enough, we need to update the sarea_priv copy of the breadcrumb just as if we had waited. Otherwise userland error checking will notice that we returned too early based on its wrong information, and call wait_irq again (leading to spinning until someone else comes along and updates the sarea_priv). This bug was hidden when we had interrupt masking disabled, such as in master, since the interrupt handler would update sarea_priv.
2008-06-13[gem] Remove the interrupt handler for retiring requests.Eric Anholt
This was insufficient once we started masking interrupts to only when someone was waiting for them (and would thus retire requests themselves). It was replaced by the retire_timer.
2008-06-13radeon: bump driver date to know if lockup fix is inJerome Glisse
2008-06-13radeon: r345xx fixe hard lockupJerome Glisse
This patch should fixe hard lockup and convert them in softlockup (ie you can ssh the box but the gpu is busted and we are waiting in loop for it to come back to reason).
2008-06-12Don't clear USER_INTERRUPT if we're not handling it.Eric Anholt
This fixes a regression from commit d434b64f6a760d85295e32298a9a1f3624ee1b69 which could cause us to fail to wake up for user interrupts if we lost a race.
2008-06-11Use GEM in modesettingJesse Barnes
Use GEM for ring buffer setup and framebuffer allocation. This means reworking the hardware status page stuff a bit (just use the basic range allocator for vram for now) and #ifdef'ing out the TTM & DRI2 code. Works well enough to load/unload several times and display fbcon on my T61 (though there's still some unexplained console corruption).
2008-06-11[gem] Another round of cleanups from checkpatch.plEric Anholt
2008-06-11RADEON: use DSTCACHE_CTLSTAT rather than RB2D_DSTCACHE_CTLSTATAlex Deucher
According to the hw guys, you should use DSTCACHE_CTLSTAT to flush the 2D dst cache rather than RB2D_DSTCACHE_CTLSTAT.
2008-06-11[gem] Move potentially device-specific ioctls to the intel driver.Eric Anholt
This is the create (may want location flags), pread/pwrite/mmap (performance tuning hints), and set_domain (will 32 bits be enough for everyone?) ioctls. Left in the generic set are just flink/open/close. The 2D driver must be updated for this change, and API but not ABI is broken for 3D. The driver version is bumped to mark this.
2008-06-11Merge commit 'origin/drm-gem' into modesetting-gemJesse Barnes
Use new GEM based ring buffer initialization. Still need to init GEM & use it for framebuffer allocation etc. Conflicts: shared-core/i915_dma.c shared-core/i915_drv.h
2008-06-10[intel] Fix BUG_ON trigger in irq masking if you did on/off with irqs disabled.Eric Anholt
2008-06-10[gem] Manage the ringbuffer from the kernel in the GEM case.Eric Anholt
This requires that the X Server use the execbuf interface for buffer submission, as it no longer has direct access to the ring. This is therefore a flag day for the gem interface. This also adds enter/leavevt ioctls for use by the X Server. These would get stubbed out in a modesetting implementation, but are required while in an environment where the device's state is only managed by the DRM while X has the VT.
2008-06-10xgixp: Remove dependency on TTM fencesIan Romanick
2008-06-10Merge commit 'origin/drm-gem' into modesetting-gemJesse Barnes
Passed the compile test; it's ready to ship. Conflicts: libdrm/Makefile.am linux-core/Makefile.kernel linux-core/drmP.h linux-core/drm_memrange.c linux-core/drm_stub.c shared-core/drm.h shared-core/i915_dma.c shared-core/i915_drv.h shared-core/i915_irq.c
2008-06-09RADEON: Add untested support for RS400 chipsAlex Deucher
GART setup appears to work the same as RS480 chips. Also RC4xx chips are actually RS400 based, not RS480 based.
2008-06-09RADEON: switch IGP gart to use radeon_write_agp_base()Alex Deucher
2008-06-08Fix typo in i915_suspendRobert Noland
Reported by vehemens
2008-06-08I915 suspend/resume for FreeBSDRobert Noland
2008-06-09r300/r500: add hier-z regsDave Airlie
2008-06-06 [intel] remove settable use_mi_batchbuffer_startKeith Packard
The driver can know what hardware requires MI_BATCH_BUFFER vs MI_BATCH_BUFFER_START; there's no reason to let user mode configure this.
2008-06-06[intel] remove settable use_mi_batchbuffer_startKeith Packard
The driver can know what hardware requires MI_BATCH_BUFFER vs MI_BATCH_BUFFER_START; there's no reason to let user mode configure this.
2008-06-06[intel-gem] Use timers to retire requests periodically.Keith Packard
Without the user IRQ running constantly, there's no wakeup when the ring empties to go retire requests and free buffers. Use a 1 second timer to make that happen more often.
2008-06-06[intel] free the hardware status page at driver_unloadKeith Packard
This goes with the other hardware status page patch.
2008-06-06[intel-gem] Add explicit throttle ioctlKeith Packard
Instead of throttling and execbuffer time, have the application ask to throttle explicitly. This allows the throttle to happen less often, and without holding the DRM lock.
2008-06-06[intel] Allocate hardware status page at driver load timeKeith Packard
I couldn't get the re-allocated HWS to work on my 965GM, so I just gave up and made it persist across the lifetime of the driver instead.
2008-06-06Ignore X server provided mmio addressKeith Packard
2008-06-06drm/intel: make hotplug just be an eventDave Airlie
2008-06-05radeon: Restore software interrupt on resume.Dennis Kasprzyk
Fixes performance drop after suspend/resume on some systems.
2008-06-05modesetting: initial attempt at debonging fbDave Airlie
2008-06-04drm: introduce generation counter to interface.Dave Airlie
Idea being if you want to add new crtc/output/encoder dynamically later, you just increase the generation counter and userspace should re-read all the resources
2008-06-03drm: sg alloc should write back the handle to userspaceDave Airlie
2008-06-02drm: add functions to get/set gamma rampsDave Airlie
2008-06-02drm/modesetting: another re-org of some internals.Dave Airlie
Move dpms into the helper functions. Move crtc into the encoder. Move disable unused functions into the helper.
2008-05-30RADEON: fix typo in last commitAlex Deucher
2008-05-30Merge commit 'origin/master' into drm-gemEric Anholt
Conflicts: linux-core/Makefile.kernel shared-core/i915_drv.h shared-core/nouveau_state.c
2008-05-30r500: attempt to make AGP work by programming agp base in the MC correctlyDave Airlie
2008-05-30drm: switch possible crtc/clones over to encodersDave Airlie
2008-05-30modesetting: the great renaming.Dave Airlie
Okay we have crtc, encoder and connectors. No more outputs exposed beyond driver internals I've broken intel tv connector stuff. Really for TV we should have one TV connector, with a sub property for the type of signal been driven over it
2008-05-30drm: attach an encoder.Dave Airlie
Time to do some renaming on the connectors I think
2008-05-30drm: add more encoder interfacesDave Airlie
2008-05-30modesetting: reorganise out crtc/outputs are allocated.Dave Airlie
Use subclassing from the drivers to allocate the objects. This saves two objects being allocated for each crtc/output and generally makes exit paths cleaner.
2008-05-29modesetting: reorganise code into core and helper functions.Dave Airlie
This splits a lot of the core modesetting code out into a file of helper functions, that are only called from themselves and/or the driver. The driver gets called into more often or can call these functions from itself if it is a helper using driver. I've broken framebuffer resize doing this but I didn't like the API for that in any case.
2008-05-28Merge branch 'master' of git+ssh://git.freedesktop.org/git/mesa/drm into ↵Alan Hourihane
modesetting-101 Conflicts: shared-core/i915_dma.c shared-core/i915_drv.h
2008-05-28radeon: split microcode out into a separate header file.Dave Airlie