summaryrefslogtreecommitdiff
path: root/shared-core
AgeCommit message (Collapse)Author
2008-07-03nv50: s/FALSE/false && s/TRUE/trueMaarten Maathuis
2008-07-02NV50: basic fbcon + misc fixesMaarten Maathuis
- There is one fb, used for as many outputs as possible. - Eventually smaller screens will be scaled to see the full console, but for the moment this'll do.
2008-07-01NV50: some i2c cleanupMaarten Maathuis
2008-06-27NV50: use list_head item instead of list_head head to avoid confusionMaarten Maathuis
2008-06-25NV50: i misunderstood NOUVEAU_MEM_INTERNAL, so remove itMaarten Maathuis
2008-06-25NV50: Some cleanup and fixes.Maarten Maathuis
2008-06-25nv50: when destroying a channel make sure it's not still current on PFIFOBen Skeggs
We won't get a PFIFO context switch when the same channel ID is recreated if the hw still thinks the channel is already active, which causes fun issues. Should allow X to be stopped and started without tearing down the entire card state in lastclose().
2008-06-25nouveau: allocate drm-use vram buffers from end of vram.Ben Skeggs
This avoids seeing garbage from engine setup etc before X gets around to pointing the CRTCs at a new scanout buffer. Not actually a noticable problem before G80 as PRAMIN is forced to the end of VRAM by the hardware already.
2008-06-22nouveau: disable KMS for pre-NV50 even when specifically enabledMaarten Maathuis
2008-06-22NV50: Initial import of kernel modesetting.Maarten Maathuis
2008-06-06 [intel] remove settable use_mi_batchbuffer_startKeith Packard
The driver can know what hardware requires MI_BATCH_BUFFER vs MI_BATCH_BUFFER_START; there's no reason to let user mode configure this.
2008-06-06drm/intel: make hotplug just be an eventDave Airlie
2008-06-05modesetting: initial attempt at debonging fbDave Airlie
2008-06-04drm: introduce generation counter to interface.Dave Airlie
Idea being if you want to add new crtc/output/encoder dynamically later, you just increase the generation counter and userspace should re-read all the resources
2008-06-02drm: add functions to get/set gamma rampsDave Airlie
2008-06-02drm/modesetting: another re-org of some internals.Dave Airlie
Move dpms into the helper functions. Move crtc into the encoder. Move disable unused functions into the helper.
2008-05-30drm: switch possible crtc/clones over to encodersDave Airlie
2008-05-30modesetting: the great renaming.Dave Airlie
Okay we have crtc, encoder and connectors. No more outputs exposed beyond driver internals I've broken intel tv connector stuff. Really for TV we should have one TV connector, with a sub property for the type of signal been driven over it
2008-05-30drm: attach an encoder.Dave Airlie
Time to do some renaming on the connectors I think
2008-05-30drm: add more encoder interfacesDave Airlie
2008-05-30modesetting: reorganise out crtc/outputs are allocated.Dave Airlie
Use subclassing from the drivers to allocate the objects. This saves two objects being allocated for each crtc/output and generally makes exit paths cleaner.
2008-05-29modesetting: reorganise code into core and helper functions.Dave Airlie
This splits a lot of the core modesetting code out into a file of helper functions, that are only called from themselves and/or the driver. The driver gets called into more often or can call these functions from itself if it is a helper using driver. I've broken framebuffer resize doing this but I didn't like the API for that in any case.
2008-05-28Merge branch 'master' of git+ssh://git.freedesktop.org/git/mesa/drm into ↵Alan Hourihane
modesetting-101 Conflicts: shared-core/i915_dma.c shared-core/i915_drv.h
2008-05-28radeon: split microcode out into a separate header file.Dave Airlie
2008-05-28i915: fix BSD bh, DRI2 not uses anywhere elseDave Airlie
2008-05-28radeon: bump release date/version for r500 3D supportDave Airlie
2008-05-27RADEON: add get_param for number of GB pipesAlex Deucher
2008-05-27[i915] Fix typo in (unused) START_ADDR definition.Jie Luo
2008-05-27[FreeBSD] Add vblank-rework support and get drivers building.Robert Noland
The i915 driver now works again.
2008-05-23i915: do a better job of parsing VBIOS dataJesse Barnes
Add code to get panel modes from the VBIOS if present and check whether certain outputs exist. Should make our display detection code a little more robust.
2008-05-23r500: add two more register ranges for mesa driver to setupDave Airlie
2008-05-23drm: fix nouveau warningDave Airlie
2008-05-22i915: init bo mm at driver init only when modeset=1Hong Liu
To avoid bo memory manager being inited twice, it will be called at firstopen when modeset is not enabled.
2008-05-21rs690/r500: vblank support.Dave Airlie
The new display controller has the vblank interrupts in a different place. Add support for vbl interrupts for these chips
2008-05-17r500: add more register ranges for Mesa driverDave Airlie
2008-05-13RS4xx: separate out RS400 and RS480 IGP chipsAlex Deucher
RS400 (intel based IGP) and RS480 (AMD based IGP) have different MC and GART setups. Currently we only support RS480.
2008-05-13Merge branch 'modesetting-101' of ssh://git.freedesktop.org/git/mesa/drm ↵Jesse Barnes
into modesetting-101
2008-05-13i915: register definition & header file cleanupJesse Barnes
It would be nice if one day the DRM driver was the canonical source for register definitions and core macros. To that end, this patch cleans things up quite a bit, removing redundant definitions (some with different names referring to the same register) and generally tidying up the header file.
2008-05-13i915: execbuf now works without i915_dma_init being calledJakob Bornecrantz
2008-05-12i915: TV hotplug fixesJesse Barnes
In order to avoid recursive ->detect->interrupt->detect->interrupt->... we need to disable TV hotplug interrupts in intel_tv.c:intel_tv_detect_type. We also need to enable the TV interrupt detection and hotplug sequence properly in i915_irq.c.
2008-05-12fix kernel oops when removing fbHong Liu
drm_crtc->fb may point to NULL, f.e X server will allocate a new fb and assign it to the CRTC at startup, when X server exits, it will destroy the allocated fb, making drm_crtc->fb points to NULL.
2008-05-12modeset init code cleanupHong Liu
moving modeset init code into one function and correct error handling druing i915 init
2008-05-12fix G33 hardware status page in modesetHong Liu
We need to alloc a hw status page bo for G33 if modeset is enabled since the 2D driver can't alloc gfx memory when working in drm modeset.
2008-05-12RADEON: fix copy/pasto in last commitAlex Deucher
2008-05-12R3/4/5: init pipe setup in drmAlex Deucher
Similar (broken) code in mesa needs to be removed
2008-05-12RADEON: cleanup radeon_do_engine_reset()Alex Deucher
2008-05-12R300+: fixup pixcache flushAlex Deucher
2008-05-12RS4xx: fix MCIND index maskAlex Deucher
2008-05-12RADEON: write AGP_BASE_2 on chips that support itAlex Deucher
2008-05-12R300+: fixup PURGE/FLUSH macrosAlex Deucher